I tried responding to an off-list message. Delivery failed for some
reason.
I just don't want the sender of the message to which I tried to reply to
think I'm ignoring him, so I elected to send this to the list.
Thanks for your patience.
--
Chad Perrin [ original content licensed OWL: http://o
On Thu, Jan 27, 2011 at 15:25, Gerald Pfeifer wrote:
> Sorry, I just realized I totally missed this question. Are you
> still seeing the problem?
>
> Looking at the web archive of this thread, I do not see anything
> stand out. What happens if you remove gcc-4.4.6.20101012 and try
> to build eve
On Thu, 27 Jan 2011, Fred wrote:
I am interested in the Xeltek SuperPro-5000. This unit will alsowork
stand-alone with a CF card programmed by the PC in addition to usb. I
believe the user software downloads a set of programming parameters and the
file to be programmed rather than driving t
Warren Block wrote:
On Thu, 27 Jan 2011, Fred wrote:
I need to buy an expensive logic device programmer that connects to a
PC through USB. Unfortunately, the user software that make it go
only runs on Bill Gates' cancerous, virus-infested, scourge of the
Earth excuse for an OS which I do not
On Wed, 27 Oct 2010, Zbigniew Komarnicki wrote:
>> This is probably a GCC problem. What exact version are you using
>> (pkg_info | grep gcc)? There is another recent report of issues with
>> the latest update to lang/gcc45:
>>
>> http://lists.freebsd.org/pipermail/freebsd-ports/2010-October/064212.
On Thu, Jan 27, 2011 at 10:50:31PM +, Mike Clarke wrote:
> On Thursday 27 January 2011, Dmitri Brengauz wrote:
>
> > On Thu, Jan 27, 2011 at 11:48 AM, Fred wrote:
> > > Hello,
> > >
> > > I need to buy an expensive logic device programmer that connects to
> > > a PC through USB.
>
> [snip]
>
> But VirtualBox OSE doesn't support USB.
VirtualBox 4 does.
http://www.virtualbox.org/changeset/33813
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-q
On Thursday 27 January 2011, Dmitri Brengauz wrote:
> On Thu, Jan 27, 2011 at 11:48 AM, Fred wrote:
> > Hello,
> >
> > I need to buy an expensive logic device programmer that connects to
> > a PC through USB.
[snip]
> Have you tried VirtualBox? You still have to shell out for a
> Windows lice
> From owner-freebsd-questi...@freebsd.org Thu Jan 27 12:01:23 2011
> Date: Thu, 27 Jan 2011 21:21:48 +0330
> From: Bahman Kahinpour
> To: freebsd-questions@freebsd.org
> Subject: Printing from inside the applications in FreeBSD 8.1 with CUPS
>
> Hello FreeBSD fans,
>
> After a lot of work, I man
I have to type one-handed. I wish to hit the shift key so the next letter I
type is upper case and the next is lower case. Here is my current x11-input.fdi
us
dvorak-r
==
"What did you do?" the man holding the flashlight asked.
"I put down a spider," he said
On Thu, 27 Jan 2011, Fred wrote:
I need to buy an expensive logic device programmer that connects to a PC
through USB. Unfortunately, the user software that make it go only runs on
Bill Gates' cancerous, virus-infested, scourge of the Earth excuse for an OS
which I do not use. Is it likely t
Fred wrote:
> Hello,
>
> I need to buy an expensive logic device programmer that connects to a PC
> through USB. Unfortunately, the user software that make it go only runs
> on Bill Gates' cancerous, virus-infested, scourge of the Earth excuse
> for an OS which I do not use. Is it likely to w
On Thu, 27 Jan 2011, Bahman Kahinpour wrote:
After a lot of work, I managed to get my printer work with CUPS with
appropriate filters. Now, I can print the test page using
http://localhost:631 and also I can print any postscript file from
command-line.
cat ~/MyPostscriptFile.ps | /usr/local/bin
On Thu, Jan 27, 2011 at 09:09:52PM +, Devin Teske wrote:
> On Thu, 2011-01-27 at 13:39 -0700, Chad Perrin wrote:
>
> > On Thu, Jan 13, 2011 at 01:57:38PM -0800, Devin Teske wrote:
> > >
> > > You're going to have to resort to things that aren't touched during a
> > > system upgrade if you wan
On Thu, 27 Jan 2011, William Bulley wrote:
According to David Demelier on Thu, 01/27/11 at
11:39:
It seems that gmake does not call `pkg-config --libs --cflags poppler`.
do you have pkg-config and poppler installed correctly?
/usr/local/libdata/pkgconfig/poppler-cairo.pc
/usr/local/libdata/
On Thu, 2011-01-27 at 13:39 -0700, Chad Perrin wrote:
> On Thu, Jan 13, 2011 at 01:57:38PM -0800, Devin Teske wrote:
> >
> > You're going to have to resort to things that aren't touched during a
> > system upgrade if you want to find out the `true' answer as to when the
> > box was first ... what
On Thu, Jan 13, 2011 at 01:57:38PM -0800, Devin Teske wrote:
>
> You're going to have to resort to things that aren't touched during a
> system upgrade if you want to find out the `true' answer as to when the
> box was first ... what? partitioned? newfs'd? clue me in here.
>
> What _is_ the defin
On Thu, Jan 27, 2011 at 11:48 AM, Fred wrote:
> Hello,
>
> I need to buy an expensive logic device programmer that connects to a PC
> through USB. Unfortunately, the user software that make it go only runs on
> Bill Gates' cancerous, virus-infested, scourge of the Earth excuse for an OS
> which
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Chad Perrin
Sent: Thursday, January 27, 2011 2:20 PM
To: freebsd-questions@freebsd.org
Subject: Re: Any package for surveys?
On Thu, Jan 27, 2011 at 12:23:08PM -0700, J
On Thu, Jan 27, 2011 at 07:43:09PM +, elbbit wrote:
> On 27/01/11 19:23, Jarrod Slick wrote:
> > On 1/27/11 12:08 PM, elbbit wrote:
> >> I am not going anywhere and the world will become self-aware in my
> >> presence. It is why I have been born.
> > You sound like a sociopath.
> You sound lik
On Thu, Jan 27, 2011 at 12:23:08PM -0700, Jarrod Slick wrote:
> On 1/27/11 12:08 PM, elbbit wrote:
> >I am not going
> >>> anywhere and the world will become self-aware in my presence. It
> >>> is why I have been born.
> You sound like a sociopath.
Actually, the correct term in this case is "me
On Thu, Jan 27, 2011 at 04:38:57PM +, elbbit wrote:
>
> I sent similar emails to other lists and was promptly scalded for being
> so uncouth. I thank those who encourage me to stop spamming for
> teaching me humility. However, I think the importance of global self
> awareness is too importan
Quoth elbbit on Thursday, 27 January 2011:
> On 27/01/11 17:04, Bill Moran ...
>
> Thank you for taking the time to reply Bill. I am glad you challenge
> me. Someone needs to!
>
> > In response to elbbit :
> >> On 27/01/11 14:41, Andrew McGlashan wrote:
> >>> Hi Simon,
> >> Thanks for taking th
"Linux emulation" on FreeBSD is not really emulation, in the sense that it
does not create virtual hardware. Some linux softwares run even faster on
FreeBSD than Linux... My worry would be more to make sure that USB
communication works through the "emulation" layers...
On Thu, Jan 27, 2011 at 2:08
On 27/01/11 19:23, Jarrod Slick wrote:
Thank you for taking the time to reply Jarrod. I appreciate your argument.
> On 1/27/11 12:08 PM, elbbit wrote:
>> I am not going anywhere and the world will become self-aware in my
>> presence. It is why I have been born.
> You sound like a sociopath.
You
On 1/27/11 12:08 PM, elbbit wrote:
I am not going
>> anywhere and the world will become self-aware in my presence. It
>> is why I have been born.
You sound like a sociopath.
I am on the outside of the matrix. You have no idea how great it is out
here. Unplug, and free your mind, just like
On 27/01/11 17:04, Bill Moran ...
Thank you for taking the time to reply Bill. I am glad you challenge
me. Someone needs to!
> In response to elbbit :
>> On 27/01/11 14:41, Andrew McGlashan wrote:
>>> Hi Simon,
>> Thanks for taking the time to reply Andrew.
>>
>>> elbbit wrote:
I held off
On 1/27/11 11:48 AM, Fred wrote:
Hello,
I need to buy an expensive logic device programmer that connects to a
PC through USB. Unfortunately, the user software that make it go only
runs on Bill Gates' cancerous, virus-infested, scourge of the Earth
excuse for an OS which I do not use. Is it
On Thu, 27 Jan 2011 01:50:16 +0330
Bahman Kahinpour wrote:
> Hi dear FreeBSD people,
> After spending a lot of time on making my HP LaserJet P1102 work on
> FreeBSD, I found out what the problem is!!! Please tell this to
> anybody who has problems with HP P1102 on FreeBSD!
> The problem with this
Hello,
I need to buy an expensive logic device programmer that connects to a PC
through USB. Unfortunately, the user software that make it go only runs
on Bill Gates' cancerous, virus-infested, scourge of the Earth excuse
for an OS which I do not use. Is it likely to work ok using wine? Wha
On Thu, 27 Jan 2011 21:21:48 +0330, Bahman Kahinpour
wrote:
> Note that I can not print using simple "lp" command as there a "lp" in
> /bin/lp.
FreeBSD uses the standard interface /usr/bin/lp*, while CUPS
brings its own commands at /usr/local/bin/lp*; it also differs
in the amount of commands (e
Hello FreeBSD fans,
After a lot of work, I managed to get my printer work with CUPS with
appropriate filters. Now, I can print the test page using
http://localhost:631 and also I can print any postscript file from
command-line.
cat ~/MyPostscriptFile.ps | /usr/local/bin/lp
Note that I can not pr
On Thu, 2011-01-27 at 03:37 -0500, Aryeh Friedman wrote:
> I have a script that may or not hang (the reasons why it hangs are
> unimportant here) and need to call it from an other script and need to
> say if it hangs to give up after X seconds and just continue the
> script (no harm done if it fai
According to Chris Brennan on Thu, 01/27/11 at 12:03:
>
> gmake is GNU Make, some applications don't talk nice w/ bsdmake ('make' on
> your bsd system). If your installing GIMP from ports then you should be
> correctly using something like 'make install clean'. The only time I've
> invoked gmake w
On Thu, Jan 27, 2011 at 11:55 AM, William Bulley wrote:
> You mention gmake, yet I use "# make install" all the time. Is this
> really gmake under the covers? I see both executables and they differ:
>
>
gmake is GNU Make, some applications don't talk nice w/ bsdmake ('make' on
your bsd system).
According to David Demelier on Thu, 01/27/11 at
11:39:
>
> It seems that gmake does not call `pkg-config --libs --cflags poppler`.
> do you have pkg-config and poppler installed correctly?
>
> /usr/local/libdata/pkgconfig/poppler-cairo.pc
> /usr/local/libdata/pkgconfig/poppler-cpp.pc
> /usr/lo
On 27/01/11 14:41, Andrew McGlashan wrote:
> Hi Simon,
Thanks for taking the time to reply Andrew.
> elbbit wrote:
>> I held off writing back because I have just launched a new website at:
>> http://www.tibble.net/
>>
>> Wait! Don't go! This isn't spam! Please! Just listen!
> Yes, it looks ve
On 27/01/2011 17:22, William Bulley wrote:
According to Lowell Gilbert on Thu,
01/27/11 at 11:04:
William Bulley writes:
Everything up to this point builds okay. Then this happens:
Making all in common
gmake[3]: Entering directory
`/usr/ports/graphics/gimp-app/work/gimp-2.6.11/plug-ins/c
According to Lowell Gilbert on Thu,
01/27/11 at 11:04:
> William Bulley writes:
>
> > Everything up to this point builds okay. Then this happens:
> >
> > Making all in common
> > gmake[3]: Entering directory
> > `/usr/ports/graphics/gimp-app/work/gimp-2.6.11/plug-ins/common'
> > cc -DHAVE_CON
On Thu, Jan 27, 2011 at 3:56 AM, Alexandr Sushko
wrote:
> Try to use not ls -l, but ls -lc. It will show you file creation time.
>
>
> ls -lcd /bin/, for example
>
> drwxr-xr-x 2 root wheel 1024 Dec 10 00:31 /bin/
>
>
I ran this and the earliest date I found was Oct 12, 2008 which seems to be
a
William Bulley writes:
> Everything up to this point builds okay. Then this happens:
>
> Making all in common
> gmake[3]: Entering directory
> `/usr/ports/graphics/gimp-app/work/gimp-2.6.11/plug-ins/common'
> cc -DHAVE_CONFIG_H -I. -I../.. -I../.. -D_THREAD_SAFE -D_REENTRANT
> -I/usr/local/inc
Quoth elbbit on Thursday, 27 January 2011:
>
> Wait! Don't go! This isn't spam! Please! Just listen!
>
Saying it's not spam doesn't make it not spam.
>
> Please forward this message to everyone, even if you know full well they
> probably won't read or understand it. This message must trave
Hi Simon,
elbbit wrote:
I held off writing back because I have just launched a new website at:
http://www.tibble.net/
Wait! Don't go! This isn't spam! Please! Just listen!
Yes, it looks very spammy to me
For anyone who is half in the know about the goings on in the world, and
are a
On Thu, Jan 27, 2011 at 3:24 PM, Jens Jahnke wrote:
> On Thu, 27 Jan 2011 13:24:23 +0100
> Polytropon wrote:
>
> P> Keep in mind that all the "magic" the U* are doing on Linux
> P> have been done by FreeBSD's devd for many years now. Maybe
> P> this is the chance to revert to a WORKING and STABLE
On Thu, 27 Jan 2011 13:24:23 +0100
Polytropon wrote:
P> Keep in mind that all the "magic" the U* are doing on Linux
P> have been done by FreeBSD's devd for many years now. Maybe
P> this is the chance to revert to a WORKING and STABLE infra-
P> structure on FreeBSD. Just remember: FreeBSD had "hot
On Thu, Jan 27, 2011 at 3:37 AM, Aryeh Friedman
wrote:
> I have a script that may or not hang (the reasons why it hangs are
> unimportant here) and need to call it from an other script and need to
> say if it hangs to give up after X seconds and just continue the
> script (no harm done if it fails
Em Qui, 2011-01-27 às 06:09 -0600, ajtiM escreveu:
> "Thanks to Solid's new UPower, UDev and UDisks backends, the deprecated HAL
> is
> no longer needed to manage hardware on Linux. Applications do not need to be
> updated to make use of these new backends. The HAL backend is still available
>
On Thu, Jan 27, 2011 at 3:37 AM, Aryeh Friedman
wrote:
> I have a script that may or not hang (the reasons why it hangs are
> unimportant here) and need to call it from an other script and need to
> say if it hangs to give up after X seconds and just continue the
> script (no harm done if it fails
Ok.
Things a not good :-(
freebsd-update produce a lot of output like this
> /usr/src/sys/kern/uipc_mbuf.c has SHA256 hash
> 893beadfcf15784f31553ea142867c2949422d6937cb61f11a0f42ae3d7727fc, but should
> have SHA256 hash
> ce374f0d9434d08ee35769f8cbad7ca074506b814394b30d19d2aebcf3b2a29c.
> /usr/
On Thu, 27 Jan 2011 06:09:58 -0600, ajtiM wrote:
> "Thanks to Solid's new UPower, UDev and UDisks backends, the deprecated HAL
> is
> no longer needed to manage hardware on Linux. Applications do not need to be
> updated to make use of these new backends. The HAL backend is still available
> f
On Thu, 27 Jan 2011 09:24:51 -0200, "Carlos A. M. dos Santos"
wrote:
> From my own experience, you will probably achieve much better results
> from HP printers if you choose the network-enabled models (those whose
> names have a "n" or "w" suffix), not the host-based ones.
I can just encourage A
2011-01-26 17:12, Warren Block skrev:
On Wed, 26 Jan 2011, Polytropon wrote:
On Wed, 26 Jan 2011 10:31:10 +0100, Sven-Åke Svensson wrote:
When booting amd64 it looks like it try to mount the nfs directories
before the network is up. On the screen I can see that it try to mount
and then there
"Thanks to Solid's new UPower, UDev and UDisks backends, the deprecated HAL is
no longer needed to manage hardware on Linux. Applications do not need to be
updated to make use of these new backends. The HAL backend is still available
for systems that do not support UPower. "
It happened with XF
On Wed, Jan 26, 2011 at 8:20 PM, Bahman Kahinpour
wrote:
> Hi dear FreeBSD people,
> After spending a lot of time on making my HP LaserJet P1102 work on
> FreeBSD, I found out what the problem is!!! Please tell this to
> anybody who has problems with HP P1102 on FreeBSD!
> The problem with this HP
Konstantin Vasilyev wrote:
> I know about how freedsd-update work.
> I use for a long time.
> But I don't understand why is freebsd-update going to update
> > FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
> to
> > The following files will be updated as part of updating to
> > 7
On 01/13/2011 11:28 PM, David Demelier wrote:
Hello folks,
I'm just guessing if there is a way to know a FreeBSD installation
date. We can't look after the uname -a ident since an update of the
FreeBSD kernel is possible.
I think searching a file absolutely not touched ever in the system can
I know about how freedsd-update work.
I use for a long time.
But I don't understand why is freebsd-update going to update
> FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
to
> The following files will be updated as part of updating to 7.3-RELEASE-p4:...
--
With best regards,
Kon
I have a script that may or not hang (the reasons why it hangs are
unimportant here) and need to call it from an other script and need to
say if it hangs to give up after X seconds and just continue the
script (no harm done if it fails)
___
freebsd-questi
Konstantin Vasilyev wrote:
> Hi all!
>
> I have installed
> %uname -a
> FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4 #3:
> Tue Jan 25 19:19:34 MSK 2011
> kvasi...@ota2.cellnetrix.com:/usr/obj/usr/src/sys/GENERIC i386
>
> I have
> @dailyfreebsd-update cron
> i
59 matches
Mail list logo
