im running FreeBSD 5.4-STABLE and am trying to do the above.
umass0: Genesyslogic USB Mass Storage Device, rev 2.00/0.33, addr 2
So i presume it's ums0 and it's a NTFS filesystem ...
mount_ntfs: /dev/ums0: Block device required
What little i have found on the web plus man pages im afraid im
Piotr Baranowski wrote:
KK Show us the exact error and exactly what you did, we can't help if
KK you're vague about it.
what i did was:
1) cd /usr/src/sys/i386/conf
2) cp GENERIC OWIEC
3) editing OWIEC
4) config OWIEC
5) cd ../compile/OWIEC
6) make depend
7) had errors
8) make -a D depend
9)
After some help getting this External HDD mounted in FreeBSD 5.4-STABLE .. i
now find im unable to copy any of the data from my BSD partition to the NTFS
hdd .. can bsd write to a NTFS drive or am i doomed to have to use winblows ?
--
Yours Sincerely
Shinjii
http://www.shinji.nq.nu
Hello
I am looking for some FreeBSD posters, i tired to search for it with
google but with no success :(
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
On 7/7/05, Warren [EMAIL PROTECTED] wrote:
After some help getting this External HDD mounted in FreeBSD 5.4-STABLE .. i
now find im unable to copy any of the data from my BSD partition to the NTFS
hdd .. can bsd write to a NTFS drive or am i doomed to have to use winblows ?
--
Yours Sincerely
Good morning, all !
Thanks for the responses pointers.
[ DUH! sorry about sending this out wrong the first time to
a1poweruser; misread the headers in the reply-to ]
I realize the intitial post was long, but I did clearly indicate that
the FTP attempts were numurous using quite a lot of anon
On 2005-07-07 03:20, Piotr Baranowski [EMAIL PROTECTED] wrote:
KK Show us the exact error and exactly what you did, we can't help if
KK you're vague about it.
what i did was:
1) cd /usr/src/sys/i386/conf
2) cp GENERIC OWIEC
3) editing OWIEC
4) config OWIEC
5) cd ../compile/OWIEC
6) make
On 2005-07-06 21:34, fbsd_user [EMAIL PROTECTED] wrote:
Does the OpenBSD Packet Filter firewall have stateless rules?
Yes.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
On 2005-07-07 06:08, Warren [EMAIL PROTECTED] wrote:
im running FreeBSD 5.4-STABLE and am trying to do the above.
umass0: Genesyslogic USB Mass Storage Device, rev 2.00/0.33, addr 2
So i presume it's ums0 and it's a NTFS filesystem ...
Not exactly.
You should also see a da[0-9]+ device
On Thu, 2005-07-07 at 07:53, datora tehnika wrote:
Good morning, all !
Thanks for the responses pointers.
[ DUH! sorry about sending this out wrong the first time to
a1poweruser; misread the headers in the reply-to ]
I realize the intitial post was long, but I did clearly indicate
On 7/7/05, Robert Slade [EMAIL PROTECTED] wrote:
Ftp mirrors etc can be found at
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors-ftp.html
Yep ... thanks. I've got the web pages for the mirrors, several at
this time. Trying to establish the connection with something other
Your message for list changelog has been forwarded to editor(s)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Warren wrote:
After some help getting this External HDD mounted in FreeBSD 5.4-STABLE .. i
now find im unable to copy any of the data from my BSD partition to the NTFS
hdd .. can bsd write to a NTFS drive or am i doomed to have to use winblows ?
You are right, ntfs with freebsd is not
Andreas Kohn wrote:
Hi,
say, do you see any messages like
NVRM: Xid: 13, 02005600 0056 0c28 006500ac 0080
(Numbers may vary, I think)
in your kernel messages after such a lock-up happened?
AFAIK this is not a FreeBSD-specific problem. I think this URL is right
but
Two days ago I was trying to pre-emptively solve this problem. A
couple quickie comments that may help out at some point, plus related
questions :
I tried to format a new hard drive using Win2K, knowing there were
issues w/ NTFS under *BSD. So, decided to format using FAT32 under
disk
Hello all,
What do you recommend to use for electrical circuits simulating?
I need such software for educational purposes. I found Oregano in
ports/cad, but may be I missed something and there is alternative
with the same or better level of features as Oregano.
Thanks.
Hay I use the same thing and just went to ftp.lt.FreeBSD.org
ftp.Freebsd.org with no problem.
WINSOCK.DLL: Microsoft wsock32.dll, ver2.2, 32bit of Jun 7 2000, at
21:34:15.
WS_FTP95 LE 4.50 97.05.17, Copyright © 1992-1997 Ipswitch, Inc.
In the session properities I use this.
Host name
datora tehnika wrote:
''too small.'' Then I went with ''default,'' but then the volume size
was ''too large.'' (for a 40 GB drive, the identical twin of which
This is known problem for Windows 2000 DiskManager. You can create FAT32
with Win98, Partition Magic, Linux, FreeBSD. Windows 2000
Today, I heard something on the partition policy for FreeBSD.
Someone said that we must put the mounted partition '/' and '/boot'
in the same slice, otherwise, the System will not boot up !
Can someone give me a confirmed anwser? thanks!
___
THANK YOU !
I have no idea why this would not work before .. exactly why I was
whining so loudly here. This should have been a no-brain try
succeed once thing.
I just now tried ftp.lt.freebsd.org, [EMAIL PROTECTED] as the password
and in like flynn.
Bizarre ... the email address I am posting
On 7/7/05, Igor Robul [EMAIL PROTECTED] wrote:
datora tehnika wrote:
''too small.'' Then I went with ''default,'' but then the volume size
was ''too large.'' (for a 40 GB drive, the identical twin of which
This is known problem for Windows 2000 DiskManager. You can create FAT32
with
hi there,
is there anyway (howto) to establish freebsd ipsec with dynamic ip?
i got an a fix ip addressed freebsd server and would like t connect with
another freebsd but with dynamic address.
thx
sz
___
freebsd-questions@freebsd.org mailing list
I have some problems with how some programs as sh or dc behave in
aterm, but not xterm.
About my system:
~%uname -a
FreeBSD Klabautermann.ks.se 5.4-STABLE FreeBSD 5.4-STABLE #8: Thu Jun
30 21:18:02 CEST 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CUSTOM i386
With a Swedish keyboard:
~%cat
On Jul 7, 2005, at 7:07 AM, Igor Robul wrote:
datora tehnika wrote:
''too small.'' Then I went with ''default,'' but then the volume size
was ''too large.'' (for a 40 GB drive, the identical twin of which
This is known problem for Windows 2000 DiskManager. You can create
FAT32 with Win98,
I did a test install of snapshot(8)
http://people.freebsd.org/~rse/snapshot/
It seemingly worked well, I could mount the snapshots as expected etc.
This morning when I rebuilt the system from 5.4p1 to p4 and rebooted.
At boot the system panicked:
panic: snapblkfree: Inconsistent block type
This is probably the wrong list to post to. Please direct me to a more
appropriate one if this is the case.
I'm having trouble building gnome2.
OS if FreeBSD 5.3
Fresh install.
Loaded via ftp
The very first thing I do is update the ports tree.
Next I try to build gnome2 and it's the
can you help me to get root passwd without boot loader?(may be software for
windows or linux)
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Timothy McLouth wrote:
I also bought a book for $47 which is useless, the title is misleading...The design and implementation of FreeBSD
Yeah, that's not the book for newbie help. I would recommend Greg Lehey's
Complete FreeBSD (note: I helped proofread the book and got a free copy
for it -
Shark Wang wrote:
Today, I heard something on the partition policy for FreeBSD.
Someone said that we must put the mounted partition '/' and '/boot'
in the same slice, otherwise, the System will not boot up !
So what?
Please explain what actual problem you are trying to solve and why you
WinNT does not support FAT32
--
John Brooks
[EMAIL PROTECTED]
BTW, I had to format as NTFS since Win2K is my only option for the
moment; first time I ever tried to use WinNT to format a volume or
drive as FAT32 was strikingly unsurprised when it failed at such a
banal task. I am now
Matthias Buelow [EMAIL PROTECTED] writes:
Now my question is: Does FreeBSD also implements these barriers, or an
equivalent mechanism, as claimed on the above URL?
Do you have a background in OS design? It affects the answer, because
you seem to be referring to access barriers and disk cache
On 7/7/05, billy gates [EMAIL PROTECTED] wrote:
can you help me to get root passwd without boot loader?(may be software for
windows or linux)
password is stored as the md5 of the string. can't be reverse engineered.
Regards,
Shantanoo
___
On 7/7/05, Jonathan Arnold [EMAIL PROTECTED] wrote:
I would recommend Greg Lehey's
Complete FreeBSD (note: I helped proofread the book and got a free copy
for it - but it's still a great book!). I also found FreeBSD Unleashed to
be pretty solid as well.
FreeBSD Unleashed is the only one I
Lo all,
[EMAIL PROTECTED]:/usr/ports/www/jakarta-tomcat41# make WITHOUT_X11=yes install
clean
jakarta-tomcat-4.1.31_1: Environment error: JAVA_PORT should not be
defined.
*** Error code 1
I did tripple check, at the time of running make, the variable is NOT
defined. I can't install any of
On 7/7/05, शंतनु (Shantanoo) [EMAIL PROTECTED] wrote:
On 7/7/05, billy gates [EMAIL PROTECTED] wrote:
can you help me to get root passwd without boot loader?(may be software for
windows or linux)
password is stored as the md5 of the string. can't be reverse engineered.
Regards,
I'm trying to improve the performance of our rural homebrew wireless
broadband and am hoping some of the folks here can give me a pointer or
two as to what network monitoring tools I should use.
Background:
- my internet access is five wireless and five wired hops downstream
from a 1/2 T1 (ten
I put '/boot' for an individual partition just for 1023 cylinder
story, although FreeBSD did
not need this action !
the following is my partitions layout, pls help to do some check:
ad0s1d /boot - 30M
ad0s1a / - 512M
ad0s1b swap - 512M
ad0s1e /usr - 6144M
ad0s1f /var
Alex Zbyslaw wrote:
Chris Roos wrote:
One final question is whether the dump/restore process is the best
approach in this instance? I have read about using dd but am not
entirely sure whether this would do what I need?
No, you should use dump/restore and if it is the root partition you
Thanks for the time taken to detail all of the steps. I think I am
doing roughly the same thing except you are going via from _source_ to
_intemediary_ back to _source_ once the RAID is sorted. I am going
straight from _source_ to _destination_.
I may be wrong but do any of your steps below
On 07/07/05 04:06 PM, Chris Knipe sat at the `puter and typed:
Lo all,
[EMAIL PROTECTED]:/usr/ports/www/jakarta-tomcat41# make WITHOUT_X11=yes
install
clean
jakarta-tomcat-4.1.31_1: Environment error: JAVA_PORT should not be
defined.
*** Error code 1
I did tripple check, at the
Nopes. I'm sure I'm afraid...
[EMAIL PROTECTED]:~# cd /usr/ports/www/jakarta-tomcat41/
[EMAIL PROTECTED]:/usr/ports/www/jakarta-tomcat41# unset JAVA_HOME
[EMAIL PROTECTED]:/usr/ports/www/jakarta-tomcat41# make WITHOUT_X11=yes install
clean
jakarta-tomcat-4.1.31_1: Environment error: JAVA_PORT
--On Wednesday, July 06, 2005 20:18:37 -0700 M. Goodell
[EMAIL PROTECTED] wrote:
Hello,
I have successfully installed: imap-uw / squirrellmail / mysql / postfix
/ PostfixAdmin and have setup postfix virtual domain capability. Postfix
accepts mail for virtual hosts / accounts that I configured
On 7/7/05, Andrey Simonenko [EMAIL PROTECTED] wrote:
Hello all,
What do you recommend to use for electrical circuits simulating?
I need such software for educational purposes. I found Oregano in
ports/cad, but may be I missed something and there is alternative
with the same or better level
What about /etc/make.conf or the Makefiles in the jakarta-tomcat ports
directories?
John.
Thanks John :)
/etc/make.conf had it defined.
--
Chris.
___
freebsd-questions@freebsd.org mailing list
Getting flooded with:
pid 65128 (procmail), uid 3005: exited on signal 11
pid 65138 (procmail), uid 806: exited on signal 11
pid 65142 (procmail), uid 24112: exited on signal 11
pid 65143 (procmail), uid 11977: exited on signal 11
pid 65146 (procmail), uid 29601: exited on signal 11
pid 65149
Lowell Gilbert [EMAIL PROTECTED] writes:
Do you have a background in OS design? It affects the answer, because
you seem to be referring to access barriers and disk cache flushes
interchangeably, which doesn't make sense, especially on
multiprocessor systems.
From what I understand from some
MY KEYBOARD DOSENT RESPOND
Hi i have almost 1 month trying to run xorg, the problem is my
keyboard, went i run
test#startx
X window system start, my mouse is working, but my keyboard dosent
respond to anything.
If i test the xorg config:
test# Xorg
the following is my partitions layout, pls help to do some check:
ad0s1d /boot - 30M
ad0s1a / - 512M
ad0s1b swap - 512M
ad0s1e /usr - 6144M
ad0s1f /var - 512M
ad0s1g /home - 2017M
ad0s1h /tmp - 512M
I believe /boot needs to be on the first 1024
the following is my partitions layout, pls help to do some check:
ad0s1d /boot - 30M
ad0s1a / - 512M
ad0s1b swap - 512M
ad0s1e /usr - 6144M
ad0s1f /var - 512M
ad0s1g /home - 2017M
ad0s1h /tmp - 512M
I believe /boot needs to be on the first 1024
Hey all --
Am reading through http://sourceforge.net/projects/filezilla as these
messages came in.
Going on third recommendation for this :
Freebsd installer guide. www.a1poweruser.com
THANKS! I have it already ! ;-) Downloaded ready to read off-line
for the next couple of days. Have also
On 2005-07-07 11:45, Matt Juszczak [EMAIL PROTECTED] wrote:
Getting flooded with:
pid 65128 (procmail), uid 3005: exited on signal 11
pid 65138 (procmail), uid 806: exited on signal 11
pid 65142 (procmail), uid 24112: exited on signal 11
[...]
This is a high traffic mail server is
Hello
I have posted before, about my problems with Kernel compilation.
Now it's bigger problem ;-)
I still can't compile the kernel.
Now i reinstalled FreeBSD 5.4, totally clean download.
It's just for education/fun, so i can do that.. for now.
I choosed Standard install, Devel distribution,
Bob Hall wrote:
I don't know squat about perl. I recently ran portupgrade, which
upgraded perl. Goose stopped working, because the location for Curses.pm
was no longer in @INC. I tried to run perl-after-upgrade, but I couldn't
get it to run. I've got a book that said to use
# perl
Chris Roos wrote:
Alex Zbyslaw wrote:
Chris Roos wrote:
One final question is whether the dump/restore process is the best
approach in this instance? I have read about using dd but am not
entirely sure whether this would do what I need?
No, you should use dump/restore and if it is the
Signal 11 is a segmentation fault. This _might_ be an indication of
hardware/memory problems.
Actually all the seg faults signal 11 happened at one time (within 20
seconds), after checking messages
it hasn't happened since.
Could it have been a fluke?
-Matt
Shantanoo wrote:
I haven't check Oregano. But for electrical circuit simulation 'spice'
is nice :)
I used spice too for a few weeks only. It's very powerful, but as far as
I know it has no GUI (everybody wants a GUI ;-p) and in my opinion it's
very hard to learn quickly without a printed
On 2005-07-07 13:20, Matt Juszczak [EMAIL PROTECTED] wrote:
Signal 11 is a segmentation fault. This _might_ be an indication of
hardware/memory problems.
Actually all the seg faults signal 11 happened at one time (within 20
seconds), after checking messages it hasn't happened since.
Shark Wang wrote:
I put '/boot' for an individual partition just for 1023 cylinder
story, although FreeBSD did
not need this action !
the following is my partitions layout, pls help to do some check:
ad0s1d /boot - 30M
ad0s1a / - 512M
ad0s1b swap - 512M
ad0s1e /usr -
The accounts are kept in MySQL via a PostfixAdmin installation. Again, I can
deliver mail all day to any virtual host / account I setup in PostfixAdmin but
I am not able to get SquirrellMail to login to get the mail.
I am using the following group of applicaitons together:
imap-uw /
Do the segfaults only happen when you run procmail? If other programs
fail randomly with segfaults, then it's more likely to be a general
memory-hardware problem. If it's only procmail that fails it could be
just a procmail bug.
Procmail is the only one segfaulting with signal 11. POP3 has
On Wed, 6 Jul 2005 23:29:17 -0400
fbsd_user [EMAIL PROTECTED] wrote:
On Sun, 3 Jul 2005 16:47:24 -0400
fbsd_user [EMAIL PROTECTED] wrote:
This is my last coding problem.
target=check-state
# Find the rule number of the target rule where you want the
doorman
# pass rules
Hi everyone,
I have installed Spamassassin and rules_dujour
I have NOT changed any settings , it is a vanilla install no config files or
anything has been modified, yet spam is coming right through
Here's the header of one; I feel I'm missing something , I mean just by the
subject I would
On 7/7/05, Piotr Baranowski [EMAIL PROTECTED] wrote:
Hello
I have posted before, about my problems with Kernel compilation.
Now it's bigger problem ;-)
I still can't compile the kernel.
Now i reinstalled FreeBSD 5.4, totally clean download.
It's just for education/fun, so i can do
Matt Juszczak [EMAIL PROTECTED] writes:
Procmail is the only one segfaulting with signal 11. POP3 has exiting
with signal 6 a few times, but only a few, and its been sporadic.
I assume that you've checked that you're running the latest version (or
ports version) of procmail?
mkb.
On Thu, Jul 07, 2005 at 06:55:58PM +0200, legalois wrote:
Bob Hall wrote:
I don't know squat about perl. I recently ran portupgrade, which
upgraded perl. Goose stopped working, because the location for Curses.pm
was no longer in @INC. I tried to run perl-after-upgrade, but I couldn't
get it
Hi All,
I am going to install FreeBSD 5.4 on MS Virtual PC. My PC (IBM
Thinkpad R51) only has 256MB of RAM available. I do not want to
install Gnome or KDE however I would like the benefits of colors in
text editors, backgrounds, etc. as this is going to be a testing
environment for application
--On Thursday, July 07, 2005 14:39:44 -0400 Bob Hall [EMAIL PROTECTED] wrote:
As I stated above, I used portupgrade. That means that any messages at
the end of the perl upgrade scrolled off the screen and out of the
screen buffer when portupgrade carried out the next install. One of the
On 07/07/05 02:04 PM, Jean-Paul Natola sat at the `puter and typed:
Hi everyone,
I have installed Spamassassin and rules_dujour
I have NOT changed any settings , it is a vanilla install no config files or
anything has been modified, yet spam is coming right through
Here's the header
Hakim,
You're pressing it a bit considering that X does use up a bit of
resources, and considering that you have an additional system overlayed on
top of Windows (I assume you are using XP), you will want to actually go
out and get more RAM. You are unfortunately working with conditions which
Hi
May I suggest you as this on the sa-users list. You'll get specific
help for you config
--
Martin
On 7/7/05, Jean-Paul Natola [EMAIL PROTECTED] wrote:
Hi everyone,
I have installed Spamassassin and rules_dujour
I have NOT changed any settings , it is a vanilla install no config files
hey,
I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID
controler on board. I have four 120gig sata drives attached to it. I can
succefully build a RAID 0, 1 or 10 in the BIOS, but the created RAID
dosent seem to show up in Freebsd. The drives get detected but I can
only
On Jul 7, 2005, at 1:48 PM, Evan Jones wrote:
hey,
I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID
controler on board. I have four 120gig sata drives attached to it.
I can succefully build a RAID 0, 1 or 10 in the BIOS, but the
created RAID dosent seem to show up in
On Thursday 07 July 2005 18:27, Alex Zbyslaw wrote:
1Gb just because it's peanuts to a 200Gb disk, and I don't bother with
/tmp separately.
I use one because, by default, / is mounted without soft-updates. It is
possible to turn it on, but for the sake of a few hundred MB it seems
sensible
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, Jul 07, 2005 at 02:40:09PM -0400, Hakim Singhji wrote:
Hi All,
I am going to install FreeBSD 5.4 on MS Virtual PC. My PC (IBM
Thinkpad R51) only has 256MB of RAM available. I do not want to
install Gnome or KDE however I would like the
Ah, yes... sorry for the poor answering earlier. eterm, aterm and
xterm all handle terminal coloring very nicely, with eterm being the most
resource hungry of the three terminals listed previously.
My apologies for the confusing prior answer.
-Garrett
On Thu, 7 Jul 2005, Scott Robbins
On Wednesday 06 July 2005 20:10, Bob Hall wrote:
I don't know squat about perl. I recently ran portupgrade, which
upgraded perl. Goose stopped working, because the location for Curses.pm
was no longer in @INC. I tried to run perl-after-upgrade, but I couldn't
get it to run. I've got a book
Actually Garrett,
Your first answer was quite helpful as well. I am trying to figure out
the best way to use X windows, a wm and xterm in a manner that will
not slow down performance to a crawl, something that will resemble my
development environment on my main machine without a full install or
DM Looks like that. There is a couple of memory test programs, I like these:
DM http://www.memtest86.com/
DM http://www.ocztechnology.com/aboutocz/press/2004/114
Yep, it was memory problem.
I had 2x64Mb and 1x128 - the 64 modules was my friends.. and they are
corrupt.
Sorry for trashing up the
On Thu, Jul 07, 2005 at 01:53:48PM -0500, Paul Schmehl wrote:
--On Thursday, July 07, 2005 14:39:44 -0400 Bob Hall [EMAIL PROTECTED]
wrote:
As I stated above, I used portupgrade. That means that any messages at
the end of the perl upgrade scrolled off the screen and out of the
screen
If the problem is intermittent then I would suspect the hardware (I
know, everyone always says that, but I really have used a brand new
server which segfaulted randomly and it really was a memory problem).
Try building a memtest86 CD from the ports (from a different machine
perhaps) and
Hi,
Al last I could enter to freeBSD by SSH. After I erased all
inetd_enable=YES instances except one. Also I downloaded the PuTTY
client.
I had to create other user to connect myself to freeBSD because it
doesn't leave me as root user.
How do I to connect myself to freeBSD by ssh as
Recently a bug was discoverd which affected various unix platforms
including FreeBSD. (
ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-05:16.zlib.asc
)
But it say it only affects the 5.x releases and not the 4. Is it true
only the 5.x releases are affected? (I think it rather
Efren Bravo wrote:
Hi,
Al last I could enter to freeBSD by SSH. After I erased all
inetd_enable=YES instances except one. Also I downloaded the PuTTY
client.
I had to create other user to connect myself to freeBSD because it
doesn't leave me as root user.
How do I to connect myself to
Frank de Bot wrote:
Recently a bug was discoverd which affected various unix platforms
including FreeBSD. (
ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-05:16.zlib.asc
)
But it say it only affects the 5.x releases and not the 4. Is it true
only the 5.x releases are
Well first off its not the best idea, to enable it you need to edit the
PermitRootLogin
option in /etc/ssh/sshd_config then restart sshd (sh /etc/rc.d/sshd restart)
Efren Bravo wrote:
Hi,
Al last I could enter to freeBSD by SSH. After I erased all
inetd_enable=YES instances except one. Also
On Jul 7, 2005, at 5:31 PM, Frank de Bot wrote:
Recently a bug was discoverd which affected various unix platforms
including FreeBSD. ( ftp://ftp.freebsd.org/pub/FreeBSD/CERT/
advisories/FreeBSD-SA-05:16.zlib.asc )
But it say it only affects the 5.x releases and not the 4. Is it
true only
Efren Bravo wrote:
Hi,
Well first off its not the best idea, to enable it you need to edit
the PermitRootLogin
option in /etc/ssh/sshd_config then restart sshd (sh /etc/rc.d/sshd
restart)
Would be a better idea to enter as other member user of wheel group
and then become this user as
Hi,
My server support by bios remote access via the serial port. Configured
it, bios shows up on my terminal client. But as soon the FreeBSD has
been loaded. (Last message I get through was: Press [enter] to boot
immedialty.
Is it needed for FreeBSD to take over the serial console from here,
Am Freitag, 8. Juli 2005 00:16 schrieb Frank de Bot:
Hi,
My server support by bios remote access via the serial port. Configured
it, bios shows up on my terminal client. But as soon the FreeBSD has
been loaded. (Last message I get through was: Press [enter] to boot
immedialty.
Is it needed
On 07/07/05 11:37 PM, Kvesdn Gbor sat at the `puter and typed:
Frank de Bot wrote:
Recently a bug was discoverd which affected various unix platforms
including FreeBSD. (
ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-05:16.zlib.asc
)
But it say it only affects the
Tuc at T-B-O-H wrote:
*If* there are intermittent memory errors, then it could be that SETI
always happens to get them in the data it is dealing with, in which case
it might run perfectly happily but just produce the wrong results.
Memtest is dull, and stops you using your PC, but like
RW wrote:
On Thursday 07 July 2005 18:27, Alex Zbyslaw wrote:
1Gb just because it's peanuts to a 200Gb disk, and I don't bother with
/tmp separately.
I use one because, by default, / is mounted without soft-updates. It is
possible to turn it on, but for the sake of a few hundred MB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Evan Jones
Sent: Thursday, July 07, 2005 12:49 PM
To: freebsd-questions@freebsd.org
Subject: FreeBSD 5.4 and Sli 3114 sata controller broken?
I have a Tyan s2882 mainboard with an integrated SLI
I did the standard tests for 24 hours (21 passes) and it didn't fail.
I ran the 90 minute fading one for 24 hours (8 runs) and it too didn't fail.
It's almost a shame when a test like this passes. It's much easier to
just replace some memory and get on with things than be stuck with an
The setup:
Both machines FreeBSD/i386 5.4
a) AMD64 machine with on-board Marvel Gigabit NIC
b) Athlon XP with cheap SMC Gigabit NIC (also Marvel)
Cabling is brand new Cat5e. Have tried various different cables of
different lengths to no effect.
To rule out problems with a cheap
On 7/6/05, Brett Glass [EMAIL PROTECTED] wrote:
A client had a network problem, and I wanted to make sure that his FreeBSD
4.11
router wasn't the cause of it, so I rebooted it. I then did a last
command
and saw the following:
root ttyv0 Tue Jul 5 12:01 - 12:05 (00:04)
admin ttyp0
as I had read some partitions material about legacy Unix, I try to
separate '/boot' from '/' for my large space on '/' .
another question come up : Is ad0s1d the first blocks of the disk which
based on partitions layout that my gave?
thanks!
-Shark
On 7/8/05, John McAree [EMAIL PROTECTED]
Somebody please direct me to a speedy-cgi-perl support mail list and/or
support forum?
thanks in advance,
Noah
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
How can I change the default wait time for PF buffer writes to the log file?
The log records are being held in the buffers for a long time before being
written out.
I want to change this to a shorter time.
Are there any tools or ports for use on the PF log file to create better
standardized
Tuc at T-B-O-H wrote:
The only pattern I see is that it starts all of a sudden, goes for
a little while, EVERYTHING you try to do fails, I get the
/libexec/ld-elf.so.1: top: Shared object has no run-time symbol table
type errors, and then all of a sudden it goes about its merry way.
1 - 100 of 114 matches
Mail list logo