IP Changed == Problem

Hello, I recently changed my ISP - DSL provider, a new static IP, and now having problems ssh'ing in, none before. My config == ISP[DSL] ==Modem==Router/Gateway == HubLAN machine(1) |LAN machine(2)

Re: IP Changed == Problem

associated with hostname Thanks -- Joe -- Adam Maas wrote: If you are using static mappings, check to see if they are IP they are mapping from was updated (External IP) Adam - Original Message - From: Joseph Maxwell [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, January 25

IP Change == Problems

Hello, I recently changed my ISP - DSL provider, a new static IP, and now having problems ssh'ing in, none before. My config == ISP[DSL] | Modem | Router/Gateway | == HubLAN machine(1) |LAN machine(2) | |LAN machine(n) The LAN

Mboard + CPU Upgrade

Hello, I've transferred two disks from a failed machine to another, with different MotherBoard and CPU. The diff / similarities follows: Differences - Old Architecture: Shuttle AI61 motherboard AMD K7 CPU Processor 900 Mhz AMD751 Chipset 3 DIMM Sockets New

O/S - System upgrade with CVS

Hello, Attempting to update my O/S from 4.2 to 4.8 Existing dir structure : == /usr/CVSROOT ( created from dist disks w/ initial installation ) I used the following cvsup files to acquire distribute the files for the respository, creating /usr/src /usr/ports /usr/doc /usr/packages (MT

Boot up disturbing messages

Hello, On 'boot' I ahave been getting the following messages, perhaps they are benign as the system eventually boots, but I am concerned about the effects on performance (in)efficiencies or even security 1. May 28 02:37:15 machine1/kernel: bt0: Failed Intstat Reg Test 2. May 28 02:37:16

Repositioning /var | /tmp to avoid disk full condition

Hello, The 3rd edition of The Complete FreeBSD suggest repositioning the /var directory ( and even /tmp) to prevent filling up that partition. I ignored it and did just that today, filled it up. So I attempted the repositioning with the following recommended command steps and results: cd

Power Management

Hello, Could someone advise on UPS systems and Power Management related software for FREE BSD systems. i.What systems are dependable and reasonable priced, esp. at the low end for use with workstations ii. Is it possible to power down several work stations simultaneously from one UPS. I

Re: Machine does not not do a normal Reboot

Hello, Cute response: When I first purchased FreeBSD, it was in the 4.2 Distribution Disk set , about 6 CDROMs When I upgraded it was over the internet When the system crashes, where do I have to go to - the original distr. disks They worked flawlessly before, why not now After the

Machine does not not do a normal Reboot

Hello, FreeBSD 4.2, PC 512MMB RAM, 2- HD 60 40 Mb. System found in indeterminate state, assumed power failure problem. Several reboot and boot attempts failed. Re-installed O/S, system came back up, data intact on 2nd HD but not seen in fstab file, remount etc. OK

Machine does not not do a normal Reboot

Hello, FreeBSD 4.2, PC 512MMB RAM, 2- HD 60 40 Mb. AMD K7 CPU, 900MHz on AI61 MotherBoard System found in indeterminate state, assumed power failure problem. Several reboot and boot attempts failed. Re-installed O/S, system came back up, data intact on 2nd HD but not

Moving Disks to new PC Machines

Hello, I need to move my system ( actually 2 hard disk) to another machine w/ different MotherBoard and CPU. The disks have been configured as a bootablesyetm disk and the other data storage. How can I reconfigure to achieve this with the minimum amount of perturbation. Thanks Joe To