On Wed, Sep 25, 2013 at 09:16:01AM +0200, Terje Elde wrote:
>
> Two options:
> ...
Thanks - helps alot.
-ewald
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "
Hi,
Since I'm about to set up a new system from scratch I'm thinking
whether I should install 9.1 and upgrade it to 9-STABLE or to install
9.2-RC4 right away.
To be specific:
o) Will upgrading kernel/system using
svn co svn://svn.freebsd.org/base/stable/9/ /usr/src
bring a 9.2-RC4 installed syst
Hi,
I'm seeing rather strange behavior on an HP DL585 G5 wrt. disk IO:
When there's any disk io the machine completely freezes, i.e. no
console input possible, no screen output - complete hang. After some
minutes the box comes back to normal again - but sure enough with the
next disk io it freeze
On Fri, Jul 26, 2013 at 01:16:32PM +0200, bw.mail.lists wrote:
> You don't actually need to install ports.txz. All it does is populate
> /usr/ports, but you can do that after install using portsnap as
> documented in the handbook
> (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports
Hi,
Upon trying to install FreeBSD 9.1 on a HP Proliant DL585G5
installation freezes when it comes to the point "Archive Extraction"
while extracting "ports.
To be specific, the system freezes while extracting ports.txz at 23%
with "Overal Progress" being 29%.
First I thought about the installat
On Fri, Jun 07, 2013 at 10:41:01AM +0930, Shane Ambler wrote:
> Just guessing from what I see -
>
> The panic is "No usable event timer found!"
>
> .
Hi Shane,
Thanks much for the hints you sent me. Since I'm pretty swamped with
work it took me a couple of days before I could go on with my
Hi,
Several days ago I got a HP Proliant DL580 G5 that I wanted to install
FreeBSD 9.1 (64bit) on - till now without any success :-(.
Symptoms: Upon booting off the installation DVD the system freezes
(when running the installation "non-verbose") or installation stops
with a panic followed by an
Hi,
I'm having a hard time getting FreeBSD 9.1 RC3 running on a HP
Proliant 385p G8.
Installation runs so far, however I can't get any network interfaces
up and running.
The output of dmesg "... link states coalesced" messages and
correspondigly in /var/log/messages I have numerous messages lik
Hi,
I'm trying to get my system up2date using portupgrade as usual.
However during the upgrade process I ran into a problem during upgrade
of yelp:
===> yelp-2.30.2_4 depends on package: libxul<2 - not found
===> Found libxul-10.0.10, but you need to upgrade to libxul<2.
UPDATING has an ent
Hi,
I've set up isc-dhcpd (/usr/ports/net/isc-dhcp42-server). The daemon
runs, hands out IP-addresses however logging doesn't seem to work.
Here's what I've got in the respective config-files:
/etc/rc.conf:
# dhcpd
dhcpd_enable="YES"
dhcpd_conf="/usr/local/etc/dhcpd.conf"
dhcpd_ifaces="em0"
dhcp
Hi,
I'm trying to install FreeBSD9 (64bit) on a HP Proliant server
(ProLiant DL385 G1). Installation is done via remote-management
("iLO") basically by mounting the Installation-ISO.
However a couple of seconds after booting the box crashes.
Here's what I tried already:
o) Re-download the ins
Hi,
On one of my systems (FreeBSD 9.0 AMD64; kernel/system current as of
today; all ports up to date) chromium (ports/www/chromium) fails to compile.
Here's what I get:
third_party/skia/src/opts/SkBitmapProcState_opts_SSSE3.cpp: In function 'void
{anonymous}::S32_generic_D32_filter_DXDY_SSSE3(c
Hi,
After installing a new machine under FreeBSD9 I discovered that the
IPv6-configuration I had in place with FreeBSD8 does no longer work.
Here's what I've got in /etc/rc.conf:
ipv6_enable="YES"
ipv6_ifconfig_em0="2001:76c:2218:2009::11/64"
ipv6_defaultrouter="2001:76c:2218:2009::1"
The interf
Hi,
Today I tried to build a new system/kernel for one of my boxes running
FreeBSD9.
make buildworld went ok, however during "make buildkernel" I got this:
-- < Cut here > --
/usr/src/sys/kern/subr_uio.c: In function 'uiomove_faultflag':
/
Hi,
I'm having a hard time trying to install FreeBSD9 (64bit) onto a HP
ProLiant BL465c G1 (Blade-System):
The boot process (booting from CD) runs up to the point where it says
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus3: 480Mbp
On Thu, Aug 04, 2011 at 01:45:02PM -0400, b. f. wrote:
> > o) What can I do to get ports recognize the correct location of the
> > xz-libraries?
>
> As I wrote above, some more information would help. I'm guessing that
> you have a port that (unfortunately) uses libtool to perform linking,
> and
Hi Matthew,
Unfortunately this doesn't work as expected:
# pkg_info -Rx xz
Information for xz-5.0.3:
#
so it seems like nothing depens on xz.
Next, I did a fresh cvsup for the ports-tree followed by a "pkgdb -L";
then again "pkg_info -Rx xz" - again nothing seems to depend on xz.
So I tried "p
Hi,
On my 8.2-System (amd64, kernel & system updated two days ago) I run
into a nasty problem updating my ports:
Ports that depend on "liblzma" fail to build with the following error:
"/usr/local/lib/liblzma.la: No such file or directory"
AFAIK, the xz-libraries are not part of the base system;
Hi,
I'm looking for graphical tools easing configuration of a bind
DNS-server. Ideally this tool should be capable of editing
IPv6-related records like too.
Is there anything available out there for FreeBSD (I already checked
the ports collection, but couldn't find anything).
Thanks much in
Hi,
Upon upgrading my ports I ran into a problem: When portupgrade comes
to upgrading sysutils/eiciel it stops with the following message:
===> eiciel-0.9.8 is marked as broken: does not compile.
*** Error code 1
Stop in /usr/ports/sysutils/eiciel.
#
However eiciel is needed by gnome2-power-to
Hi,
In one of my machines I've got a HP GE-Card ("HP NC370T Multifunction
Gigabit Server Adapter") that FreeBSD identifies as "bce".
/var/log/messages shows the following errors:
Jul 27 12:29:29 sniff-rz2 kernel: bce0: mem 0xf600-0xf7ff irq 34 at device 7.0 on pci5
Jul 27 12:29:29 sniff
Hi,
During upgrading my ports I run into very nasty problems compiling
e.g. sound-juicer or libmisicbrainz3, or more generally, ports that
depend on neon28:
Compilatino of e.g sound-juicer stops with the following error:
-- < Cut here > --
Hi,
On my system (FreeBSD 7.3 AMD64, system & kernel current as per today)
it takes awully long to start up gnome (2.30) - "awfully long" meaning
2-3 minutes (this is on a Intel quadcore-CPU with 4GB RAM!)
In my /etc/rc.conf I've got
gnome_enable="YES"
I've already ruled out the usual suspect b
Hi,
A portupgrade done today stopped with an error during the upgrade of
gstreamer-plugins-v4l2-0.10.23,3 with the following error:
-- < Cut here > --
===> Installing for gstreamer-plugins-v4l2-0.10.23,3
===> gstreamer-plugins-v4l2-0.10.2
On Tue, Jun 01, 2010 at 08:27:38AM -0400, Jerry wrote:
> > Any idea what's going on here and why I can't compile nmap?
>
> I have had several ports fail because I had openssl installed via the
> ports system. These were on FreeBSD-8/amd64 systems. I filed two PRs and
> they were fixed. I might sug
Hi,
Upon compiling nmap (5.21_1) from scratch I got the following error:
-- < Cut here > --
# make
===> Building for nmap-5.21_1
Makefile:341: makefile.dep: No such file or directory
c++ -MM -I/usr/include/lua -I/usr/local/include/lua51 -I
Hi,
After doing a regular cvsup for my ports, followed by "make
fetchindex" and "pkgdb -F", the latter fails with the following errors:
-- < Cut here > --
...
---> Checking the package registry database
Stale dependency: gobject-introspect
Hi,
Does anybody know whether the HP NC522 SFP 10GE-Adapter
(http://h18000.www1.hp.com/products/servers/networking/nc522sfp/index.html)
is supported under FreeBSD.
HP only lists various Windoze and Linux as supported but I'd like to
get this baby going under FreeBSD 8.0.
Any experience with this
On Wed, Apr 28, 2010 at 08:47:40AM +0200, Palle Girgensohn wrote:
> The fix is to use options -> rescan devices in the installer. After that,
> when selecting CDROM as media type, the installer lets you chose between
> cd0 and acd0. Select the cd0 device instead of acd0 to use the virtual cd
> d
On Thu, Apr 22, 2010 at 06:36:39PM -0600, Tim Judd wrote:
>
> ...
> Most remote management devices like Dell's DRAC and HP's iLO should
> present the drive to the OS as a USB rom. The new IPMI management
> cards are still unknown.
Oops, now I understand.
Just curious: Why can the machine boot o
Hi,
During a regular upgrade of my installed ports I ran into a problem
wrt nmap:
-- < Cut here > --
===> Building for nmap-5.21_1
Makefile:341: makefile.dep: No such file or directory
c++ -MM -I/usr/include/lua -I/usr/local/include/lua51
On Fri, Apr 23, 2010 at 06:27:11AM -0500, Doug Poland wrote:
> Try a re-scan of the devices from the options menu. If that doesn't
> help, try connecting to an ISO image in iLO instead of an optical
> device.
Hi Doug,
This is exactly what I did in the first playe, i.e. mounting an
ISO-Image
Hi,
I'm having a hard time trying to install FreeBSD 8.0 on an HP Proliant
server. To be specific I try to instal the amd64 variant of FreeBSD
8.0 on a ProLiant DL385 G1.
Since the server is remote installation is to be done via the virtual
CD/DVD of the iLO management.
The install process runs
Hi,
Recently during portupgrades fetchmail also got upgraded to
6.3.16. Since then I'm experiencing problems when trying to fetch
mails from a pop server via ssl.
Here's the error message I'm getting:
fetchmail: Issuer Organization:
fetchmail: Issuer CommonName:
fetchmail: Server CommonName:
On Wed, Dec 23, 2009 at 11:22:08AM -0500, Lowell Gilbert wrote:
> Do you need mapi? You can build gnome without it. Otherwise, you'll
> need to install 3.x to a non-standard prefix, or use 4.0.
>
Hi,
Thanks much for the hints. In the meantime I was (almost) settled with
going for 4.0alpha, b
Hi,
For quite some time now I'm trying to get samba 3.x installed on my
FreeBSD 7.2 System.
The symptoms in short:
o) 3.0 - doesn't compile
o) 3.2, 3.3 - can't be installed because of installation dependencies
to samba4-devel-4.0.0.a8_2, talloc-1.3.1 and tdb-1.1.5.
System:
FreeBSD test.at 7.2-
Hi,
Upon compiling samba3 (/usr/ports/net/samba3) from source I ran into
the following error:
-- < Cut here > --
.
.
.
Compiling passdb/machine_sid.c
Compiling locking/locking.c
locking/locking.c: In function 'unparse_share_modes':
locking/
Hi,
During a portupgrade done today the upgrade of icewm
(/usr/ports/x11-wm/icewm) stopped with the following symptoms:
.
.
.
gnome2.cc:25:19: error: gnome.h: No such file or directory
gnome2.cc:27:40: error: libgnomevfs/gnome-vfs-init.h: No such file or directory
gnome2.cc: In member function 'v
Hi,
I've got a FreeBSD 7.2 box (HP C-class Blade - AMD dual core Opteron
(x64), 4GB RAM, Broadcom NetXtreme II BCM5706) that should be
connected to a NetApp 3170 filer via NFS.
Out of the box, with nothing tuned (no special parameters for
mount_nfs, no kernel tuning), performance is very sluggish
Hi,
I'm trying to get a FreeBSD 7.2-machine (amd64) to talk to a NetApp
filer using NFS.
Basic network connetivity, i.e. ping, ssh etc. between the two is
there, but I can't mount the respective directory from the Netapp.
Here's what I get when I try to mount:
# mount_nfs -i -T 192.168.1.9:/vol
On Fri, Jul 24, 2009 at 01:58:28PM +0100, Daniel Bye wrote:
> Ooops! My apologies - it seems that an earlier version of UPDATING did indeed
> say to pkg_delete.
>
> Ewald, I'm sorry for sounding so patronising - I feel like a total fool now.
>
Hi Dan,
Now I understand - in my UPDATING that come
Hi,
Updating one of my sytems I followed /usr/ports/UPDATING and did a
"pkg_delete -r jpeg-6b_7" - only to discover that everything that
depends on jpeg-* is gone - this involves little wonders like the
complete gnome2 environment plus e.g. firefox, gimp,
openoffice.
What's really bad however is
On Thu, Jul 16, 2009 at 01:17:51PM +0200, Ewald Jenisch wrote:
> Hi,
>
> I'm having troubles installing 7.2 (AMD64) on a HP Proliant DL580 G5:
> The system boots from the Install-DVD then, while probing the
> hardware, it suddenly freezes.
>
> The last thing I see o
On Wed, Jul 15, 2009 at 02:08:14PM -0500, Adam Vande More wrote:
>
> I think you'll find most of your answers here:
>
> man cxgb
>
> I have no idea on the stability of the driver though.
>
Hi,
Thanks for the hint. I know the "cxgb"-driver is already included in
FreeBSD - I was just curious abo
Hi,
I'm having troubles installing 7.2 (AMD64) on a HP Proliant DL580 G5:
The system boots from the Install-DVD then, while probing the
hardware, it suddenly freezes.
The last thing I see on the console is
VGA: .
Has anybody else had this problem? Any cure against this?
Thanks much in adv
Hi,
I'd like to install a Chelsio T320 10GE Adapter in one of our systems
running 7.2 (AMD64).
As far as I've read FreeBSD comes with the drivers for this beast
(cxgb(4))already.
Can the corresponding interface be configured with "ifconfig" just
like any other interface?
Anything special to con
> > Does the LAGG driver works well with broadcomm giga ethernet chips ?
> > ( I plan to use LACP to a Cisco switch )
>
> Try asking at freebsd-net@
>
Hi,
I've been running with the lagg-driver for quite some time now on
several blade-systems using broadcom chips in a failover
configuration - n
On Fri, Apr 03, 2009 at 10:15:50PM +0100, Vincent Hoffman wrote:
> >
> Fair point, I had a bit more of a think, I'd now guess that it looks
> like a 32/64 bit problem, its a 32bit binary on a 64 bit system and its
> /libexec/ld-elf.so.1 complaining not /libexec/ld-elf32.so.1 whch is odd.
> do yo
On Fri, Apr 03, 2009 at 11:08:50AM -0600, Tim Judd wrote:
> > This would lead me to think you need the port misc/compat5x installed.
> > I havent any experience of netbackup though.
>
>
> I agree with this statement, since it's clearly listed as it was compiled
> FOR FreeBSD 5.3
>
> The compatX
Hi,
This question is not purely about FreeBSD itself, but about getting
Symantec Netbackup (formerly Veritas) running under FreeBSD.
First of all FreeBSD is supported directly; there's a native
commandline client for FreeBSD that supports 7.0.
I'm using FreeBSD 7.1 (fresh kernel/system as per to
On Thu, Apr 02, 2009 at 08:04:38PM +0400, Chagin Dmitry wrote:
>
> linux_expat depends on running linuxulator
> (USE_LDCONFIG=YES in Makefile) so kldload linux :)
>
Hi Dmitry,
Thanks much for the hint! I tried "kldload linux" then restarting the
build process and it went through :-)
Something
Hi,
While upgrading my ports I ran into a problem during the upgrade of
textproc/linux-expat. After the usual cvsup, "make fetchindex", pkgdb
-F I started "portupgrade -arR which resulted in a "Stop" because of a
syntax error - for details see below.
Has anybode else had this problem? What can I
Hi,
While upgrading a machine during upgrade of
/usr/ports/x11-servers/xorg-vfbserver/work/xorg-server-1.5.3 the build
process fails with the errors given below.
Any ideas what can be wrong here and how to overcome this problem?
Thanks much in advance for any clue,
-ewald
PS: FreeBSD 7.1, AMD64
On Mon, Feb 09, 2009 at 07:01:03PM +0100, Peter Ulrich Kruppa wrote:
> Try some sort of filter like print/enscript:
> # enscript your_file
> should get your Umlaut's.
>
Thanks much for the hint! I installed a2ps-a4 - workes nicely - and
prints Umlauts :-)
Kind regards,
-ewald
_
On Mon, Feb 09, 2009 at 01:46:46PM +0100, Pieter Donche wrote:
> If one installs CUPS as the printing system, one must use the
> /usr/local/bin versions of lp, lpr, lpq and lprm instead of the
> FreeBSD versions in /usr/bin, otherwise you get errors when using
> the command line interface...
>
> I
Hi,
After successfully setting up CUPS I found out a problem wrt printing
german Umlaut characters: Whenever I try to print a file with umlaut
characters the file is only printed up to not not including the first
umlaut characters. This happens for example when I take a text file
with umlaut chara
On Fri, Jan 30, 2009 at 11:30:02AM -0800, Luke Dean wrote:
>
> Me too.
> I started a thread a few days ago titled "Restarting new Xorg freezes
> system".
> My symptoms are the same as yours.
> I'm not running hald at all.
> I'm not using full-blown gnome, just windowmaker.
> I'm using the "radeon"
On Fri, Jan 30, 2009 at 03:31:28PM +, Anton Shterenlikht wrote:
> > I've got hald running as per /etc/rc.conf with hald_enable="YES" as
> > well as moused (moused_enable=YES in rc.conf).
>
> what??? where's hald_enable="YES" documented?
> There's nothing about this in X, dbus, or hald manual p
Hi,
Today I upgraded my system (ports) so I got x.org 7.4 installed.
Given the various entries in /usr/ports/UPDATING about the recent
updates for xorg I wonder what the correct settings/combinations are
for my installation:
I've got hald running as per /etc/rc.conf with hald_enable="YES" as
wel
On Tue, Jan 27, 2009 at 12:37:24PM +0300, o...@adlogic.ru wrote:
> Ewald, also look at /usr/ports/UPDATING , 20090123
>
Hi Oleg,
Thanks for the hint.
Do you mean "portupgrade -rf libxcb"? I did that before running
portupgrade -arR so I assume the problem I'm having is caused by
something differ
On Mon, Jan 26, 2009 at 03:57:50PM -0700, Tom Everett wrote:
> I'm running the "stock" FreeBSD 7.1 kernel on an IBM x330 machine. The
> machine has two physical processors but it seems that FreeBSD 7.1 on
> sees one. I downloaded the kernel source and it seems that the GENERIC
> kernel has
Hi,
During an upgrade of my ports involving x11 portupgrade dies (FreeBSD
7.1, AMD64)
Here's what I did: After cvsup, make fetchindex, I did a pkgdb -F and
then portupgrade -rf libxcb as per UPDATING of 20090123.
Next I did a pkgdb -F again, which complained about obsoleted packages
while at t
Hi,
During upgrading gnome, done exactly as described in
/usr/ports/UPDATING (entry of 20090110), during the phase of
"portupgrade -aOW" the build process stops in sysutils/gnome-power-manager:
.
.
.
gmake[2]: Leaving directory
`/usr/ports/sysutils/gnome-power-manager/work/gnome-power-manager-2.
Hi,
Having used portupgrade for several years I'm thinking to make the
switch to portmaster since both of them seem to be fully supported as
far as upgrading ports is concerned.
Anything to consider when going from portupgrade to portmaster?
Caveats/pitfalls?
Is there also a way back, i.e. from
On Wed, Jan 14, 2009 at 04:37:53PM +0100, icemaca wrote:
>
> this i386 version has
>
> cpu I486_CPU
> cpu I586_CPU
> cpu I686_CPU
>
Basically you can comment all but I686_CPU since the others are for
earlier x86 architectures.
-ewald
___
On Thu, Jan 15, 2009 at 06:56:13AM +1300, Jonathan Chen wrote:
>
> The obvious question is:
> Have you got hald running?
>
> Make sure your /etc/rc.conf has:
> gnome_enable="YES"
Hi,
Didn't know that I need 'gnome_enable="YES"' in my /etc/rc.conf.
At least the handbook doesn't mention
On Mon, Jan 12, 2009 at 07:59:33PM -0500, Jason Lenthe wrote:
>
> By all means, give CUPS a try though.
>
Thanks to you all for your hints/suggestions - I'll try to get up CUPS
with a possible fallback to print/apsfilter.
-ewald
___
freebsd-questio
Hi,
After installing a new system with 7.1 from scratch, upgrading
kernel/system as well as ports to the current version I configured
X-win (X -configure) and finally fired up gnome.
First of all, Gnome takes a LOT of time to get up - it takes almost 5
minutes (!) till I get the icons for "Comput
Hi,
For a system set up from scratch (7.1) I'm about to set up printing.
Printer: Minolta C351 (basically a networked PS-Printer also capable
of color)
My requirements: Print from mutt (mail), print text files, print
PS-files with the ability to print duplex and 2-up both in color and
b/w.
Shou
Hi,
I've got a PC (Dell) that came with a Radeon HD 2400 XT (RV610 chipset).
Afaik there isn't 3D support yet with this card, so my primary goal is
to get it working as far as 2D and speed is concerned (I don't want to
go for "vesa" if at all possible)
Which driver should I use for this card -
Hi,
After installing FreeBSD 7.1 RC1 from the DVD-image I found that the
PC in question has no LAN connectivity upon reboot.
The PC has an Intel GE builtin NIC showing up as "Intel PRO/1000
Network Connection 6.9.6" in dmesg.
For the problem: Though IP-Adress, default-GW etc. are correctly set
t
Hi,
Does anybody out there know if FreeBSD 7.1 will come out with X.org
7.4 (or still 7.3)?
Thanks much in advance for any clue,
-ewald
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubs
Hi,
To gain an understanding on the performance of iSCSI vs. local disk IO
I'm looking for a tool.
My first thought was about "iozone"...
Any other ideas?
Thanks much in advance for your help,
-ewald
___
freebsd-questions@freebsd.org mailing list
htt
Hi,
Is there any way to determine when upgrades to installed ports have
been done on a system? I did a "portupgrade -arR" recently and want to
know which ports have been upgraded in that process (and no I didn't
run that portupgrade under "script"...)
Couldn't find an option to "pkg_info", "pkgdb
On Thu, Jul 31, 2008 at 09:13:29AM -0600, Warren Block wrote:
>
> Looks like it. They're debug messages that shouldn't still be in there.
> They were removed in version 1.2 but then reappeared in 1.4.2.1:
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_offload.c
> http://www.freebs
Hi,
Today I updated kernel & system on one of my machines (FreeBSD
7.0). After the update which ran absolutely smooth I'm seeing spurious
messages both on the console and in /var/log/messages like the
following:
no toe capability on 0xc2e66400
Grep-ing through the sources I found the above mess
>
> The handbook is slightly out of date and the 'make-localhost' script
> is now history. Instead, the system comes with pre-installed
> /etc/namedb/master/localhost-forward.db and .../localhost-reverse.db
> zone files and the appropriate configuration shown in the example
> named.conf file. B
Hi,
After installing FreeBSD 7.0 (AMD64-version) on a new machine wanted
to set up a caching DNS.
As per the handbook
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-dns.html)
I wanted to run "make-localhost" in order to set up the configuration
files. But the script "make-loca
Hi,
For one of my machines (HP C-class Blade, 2 * AMD Opteron, 16GB RAM)
should I go for the i386 or the amd64 Version of FreeBSD 7.0?
As far as I've seen kernel and system isn't a problem with the amd64
version, but how about ports?
To be specific here's what I'd like to install on this machine
Hi,
I've got a Blade-system with 16GB RAM, but "only" one 140GB
harddisk. My question is about swap-space: Traditional knowledge
recommends swap = 2*RAM. This would mean 32GB swap (!).
Should I really go for 32GB swap space? Or will e.g. 16GB (= RAM-size)
be enough?
Please note, that I don't do
Hi,
Has anybody out there configured anycast DNS (where multiple instances
of a DNS-server run under the same IP-address in different parts of
the network) under FreeBSD?
I'm looking for some hints to get started, but googling around didn't
provide much info on that topic...
Thanks much in advan
Hi,
After cvsup-ing one of my 6-STABLE machines, cleaning up /usr/obj I
started the usual build process with "make buildworld". However after
some minutes it died with the following messages:
===> gnu/usr.bin/gdb/kgdb (cleandir)
rm -f i386fbsd-tdep-fixed.c nm.h tm.h xm.h kgdb main.o kthr.o trgt.o
Hi,
After downgrading my kernel (i.e. cvsup-ing the 6-STABLE sources as
per end of August), re-building kernel and system as per the handbook
I end up with a problem that neither the new nor the old kernel boots.
After doing a "make installkernel..." and rebooting the box to
single-user mode I we
Hi,
Does anybody out there know where I can find a list of sites running
FreeBSD?
I expected it on www.freebsd.org, but couldn't find it (maybe overlooked?)
Thanks in advance for any pointer.
-ewald
___
freebsd-questions@freebsd.org mailing list
http
Hi,
Because of severe problems wrt. a third party app (TSM Backup - see my
previous post) I'm looking for a way to compile a kernel/system to a
state as it was several weeks ago.
To be specific I'd like to build my system/kernel using the
source-files of FreeBSD 6.2 as they were back on September
Hi,
I've got a TSM-client (Tivoli Storage Manger - Backup-System) running
under FreeBSD 6.2 without any problems over the past months.
However after a recent kernel upgrade (about Mid September) the TSM
client stopped working. Whatever I try to backup I get the following
messages:
tsm> inc /TSM-
On Wed, Aug 08, 2007 at 11:17:12AM -0400, John Nielsen wrote:
> > if_lagg_load="YES"
>
> This belongs in /boot/loader.conf, not /etc/rc.conf.
>
> > ifconfig_bge0="UP"
> > ifconfig_bge1="UP"
> > ifconfig_lagg0="create"
>
> This should be:
> cloned_interfaces="lagg0"
>
Hi,
Implemented the chan
Hi,
Thanks to the hints posted here about "failover redundancy" I've
successfully set up lagg(4) in order to have a machine with redundant
failover connection to two switches.
The only thing that's missing is the correct configuration in
/etc/rc.conf.
Here's what I've got so far in my rc.conf:
On Wed, Aug 01, 2007 at 10:56:53AM -0500, Dan Nelson wrote:
> 6.2 was released back in January. The lagg driver went into the 6.x
> branch in May. You'll need to update to 6-stable or wait for 6.3 to be
> released. If you're tracking RELENG_6_2, you are just getting critical
> security patches.
On Wed, Aug 01, 2007 at 05:22:05PM +0200, Ronald Klop wrote:
>
> man lagg
> 'link aggregation and link failover interface'
>
> It is in 6-STABLE. I don't know since when.
>
Hi Ronald,
Thanks much for the hint. However it seems that "lagg(4)" isn't
there. At least not on my up2date 6.2 System:
Hi,
I'm looking for a way to configure failover redundancy for one of my
servers. To be specific:
The server in question has one IP-address but two LAN interfaces each
of them connecting to a different switch.
Traffic normally runs only through one of the two interfaces; the
other is for redund
Hi,
Upon compiling gstreamer-plugins-bad I ran into the following error:
-- < Cut here > --
# make
..
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/local/include -I/usr/local/include
-I../../gst-libs -I../../gst-libs -D_REENTRANT
-I/us
Hi,
I'm about to set up a new server that should run basically
network-monitoring (MRTG, Cacti etc.). Hardware will be HP C-class
blade based on AMD Opterons.
Should I stick with FreeBS 6.x or wait for FreeBSD 7 (see
http://www.freebsd.org/releng/index.html - "June 2007 Start FreeBSD
7.0 Release
During upgrading one of my systems, involving upgrading xorg I ran
into a problem.
I started the upgrade as per /usr/ports/UPDATING with these commands
(after cvsuping, pkgdb -F, make fetchindex of course):
export XORG_UPGRADE=yes
portupgrade -Rf libXft
portupgrade -a -x 'gstreamer*'
During thi
Hi,
I'm looking for a way to securely transfer files between machines
using either scp or sftp without giving the user a login shell on the
target machine. Put in another way: The user should be able to
transfer files but must not have an interactive login shell on the
target box.
Giving the user
On Fri, Apr 13, 2007 at 10:41:58PM +0200, Ewald Jenisch wrote:
>
> I've got a problem doing a "make builworld" on a new machine: When I
> start "make buildworld" in /usr/src I end up with the errors below.
> ...
Hi,
Figured out the problem myself in the mea
On Fri, Apr 13, 2007 at 05:10:55PM -0400, Gerard Seibert wrote:
>
> Are you by any chance using a custom 'stable-supfile' rather than using
> one of the preconfigured ones?
>
> /usr/share/examples/cvsup/stable-supfile
> /usr/src/share/examples/cvsup/stable-supfile
>
Hi,
No, I'm run
Hi,
I've got a problem doing a "make builworld" on a new machine: When I
start "make buildworld" in /usr/src I end up with the errors below.
Sure enough I've set up a corresponding supfile for "stable", sources
are cvsup-ed (cvsup -g -L 2 ./stable-supfile in root's home-dir) to
/usr/src correctl
On Fri, Mar 16, 2007 at 12:07:17AM -0800, Ted Mittelstaedt wrote:
>
> ...
>
> The process is long and complex. You don't want to do it if you can help
> it.
> If people beg me on this list I'll post the step by step I use but trust me
> you
> really really don't want to do this unless absolutely
On Fri, Mar 16, 2007 at 12:07:17AM -0800, Ted Mittelstaedt wrote:
>
> ...
>
> The process is long and complex. You don't want to do it if you can help
> it.
> If people beg me on this list I'll post the step by step I use but trust me
> you
> really really don't want to do this unless absolutely
1 - 100 of 154 matches
Mail list logo