Different languages in the same applications under kde konsole
I run freebsd 7.0 and kde 3.5.8, both in Italian. Now it happens that if I launch either gimp or abiword from the kde konsole the two applications speak Italian while if I launch them from the icons (that I created) on the desktop they switch to English. Why is that and what can I do for making the applications speak Italian? Ciao from Rome Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: wpi error: bus_dmamem_alloc failed to align memory properly
Il Monday 07 January 2008 03:18:21 Benjamin Close ha scritto: vittorio wrote: Context: HP laptop DV6000, centrino duo, FreeBSD 7.0-BETA4 When loading if_wpi I get the following line saying that bus_dmamem_alloc failed to align memory properly SNIP wpi0: Intel(R) PRO/Wireless 3945ABG mem 0xd800-0xd8000fff irq 16 at device 0.0 on pci2 bus_dmamem_alloc failed to align memory properly. last message repeated 30 times wpi0: Ethernet address: 00:19:d2:99:e3:cb wpi0: [ITHREAD] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54 /SNIP Therefore I'm unable to make wpi0 work at all. Could you please tell me what should I do? Ciao, Vittorio The bus_dmamem_alloc message is harmless in your case. Due to limitations in the freebsd allocator, sometimes requesting a 16k aligned block of dma memory fails. As a temporary work around the wpi driver reattempts the allocation. If it truely does fail you'll not get a wpi0 device showing up, which clearly you did :). These warning messages will go away when I sync the next lot of updates to the driver which aren't quite ready yet. Can you describe a little more what you mean by wpi doesn't work? Cheers, Benjamin wpi driver maintainer Ben, here you are a longer explanation Context: Router ZyXEL ADSL+2 with dhcp up and running Laptop HP Pavillion Entertainment DV6000 intel centrino duo 2GB of memory hpbsd# uname -a FreeBSD hpbsd.vic 7.0-BETA4 FreeBSD 7.0-BETA4 #0: Thu Dec 27 22:18:53 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HP03 i386 hpbsd# all wpi's necessary devices are compiled in the kernel device wpi device pci device wlan device wlan_amrr device firmware /var/log/messages kernel: wpi0: Intel(R) PRO/Wireless 3945ABG mem 0xd800-0xd8000fff irq 16 at device 0.0 on pci2 kernel: wpi0: Ethernet address: 00:19:d2:99:e3:cb kernel: wpi0: [ITHREAD] kernel: wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps kernel: wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps kernel: wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps the line legal.intel_wpi.license_ack=1 is in /boot/loader.conf BUT 1) it seems that sysctl is unable to find it and I have to set it via kenv legal.intel_wpi.license_ack=1 in a shell. Shouldn't this variable be set by either sysctl or by loader.conf (that is is a system variable) OR is it supposed to be set via kenv only? 2) dhclient is unable to get an IP address (BTW trying to set wpi0 up with a fixed IP makes wpi0 not associated to any AP) Here it is a session log SNIP hpbsd# sysctl -a|grep legal hpbsd# hpbsd# kenv legal.intel_wpi.license_ack=1 legal.intel_wpi.license_ack=1 hpbsd# kenv legal.intel_wpi.license_ack 1 hpbsd# ifconfig wpi0 ssid my_wireless weptxkey 1 wepmode on wepkey 0x1f7b0a5a0d hpbsd# dhclient wpi0 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 5 No DHCPOFFERS received. No working leases in persistent database - sleeping. hpbsd# ifconfig wpi0 wpi0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:19:d2:99:e3:cb inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) status: associated ssid my_wireless channel 6 (2437 Mhz 11g) bssid 00:02:cf:61:81:fd authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit txpower 50 bmiss 7 scanvalid 60 protmode CTS /SNIP Even giving an ip fixed address to wpi0 doesn't seem to work, - that is - I cannot ping anything and for netstat -rn wpi0 doesn't seem to exist. Please help Ciao from Rome ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Strange messages when booting freebsd 7.0-beta4
I recently upgraded from 6.2 to 7.0-beta4 Now, in /var/log/messages I invariably find the following messages: - Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA4 #0: Thu Dec 27 22:18:53 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HP03 module_register: module pci/ichss_pci already exists! Module pci/ichss_pci failed to register: 17 module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/smist already exists! What should I modify to avoid them? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
wpi error: bus_dmamem_alloc failed to align memory properly
Context: HP laptop DV6000, centrino duo, FreeBSD 7.0-BETA4 When loading if_wpi I get the following line saying that bus_dmamem_alloc failed to align memory properly SNIP wpi0: Intel(R) PRO/Wireless 3945ABG mem 0xd800-0xd8000fff irq 16 at device 0.0 on pci2 bus_dmamem_alloc failed to align memory properly. last message repeated 30 times wpi0: Ethernet address: 00:19:d2:99:e3:cb wpi0: [ITHREAD] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54 /SNIP Therefore I'm unable to make wpi0 work at all. Could you please tell me what should I do? Ciao, Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Intel 3945 wpi driver doesn't seem to work ('cause of license problems???)
What I really need is an explanation **step by step** on how to set up a wpi connection. Step by step . Ciao Vittorio Il Wednesday 02 January 2008 10:41:11 Matthew Seaman ha scritto: vittorio wrote: legal.intel_wpi.license_ack=1 is in /boot/loader.conf BUT 1) it seems that sysctl is unable to find it and I have to set it via kenv legal.intel_wpi.license_ack=1 Shouldn't this variable be set by sysctl or by loader.conf? 2) dhclient is unable to get an IP address (trying to set wpi0 up with a fixed IP makes wpi0 not associated to any AP) Hmmm I have a similar setup. In my case, it's a Dell D800 using iwi: % grep iwi /var/run/dmesg.boot iwi0: Intel(R) PRO/Wireless 2200BG mem 0xfafee000-0xfafeefff irq 9 at device 3.0 on pci2 [...] and a ZyXEL 660HW router: Menu 24.2.1 - System Maintenance - Information Name: gate.infracaninophile.co.uk Routing: IP ZyNOS F/W Version: V3.40(ACI.7) | 10/18/2006 ADSL Chipset Vendor: DMT FwVer: 3.4.1.0_A_TC, HwVer: T14F7_+ Standard: Multi-Mode However I have no problems setting legal.intel_iwi.license_ack=1 from /boot/loader.conf -- it could be something as stupid as no newline at end of file. Try running 'od -c /boot/loader.conf' or 'cat -e /boot/loader.conf' to verify. On the question of the DHCP service provided by this combination router and wlan hardware, and indeed the whole performance at providing wireless lan connectivity -- I'm not particularly impressed. I'd restart the laptop and everything would be fine for a few hours, but leave it running overnight and it would lose the lease and end up without an IPv4 address. IPv6 addresses autoconfigured with rtadvd and rtsol seem quite a lot more stable but I've seen every combination of being able or not to ping or ping6 the laptop from a wired machine. In the end I found that setting the ZyXEL to do DHCP Relay and running isc-dhcpd on a FBSD box with the lease times increased as so: default-lease-time 3600;# 1 hour max-lease-time 86400; # 1 day plus moving the laptop to within about 2m of the ZyXEL seems to have made quite an improvement. Cheers, Matthew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Intel 3945 wpi driver doesn't seem to work ('cause of license problems???)
Context: Router ZyXEL ADSL+2 with dhcp up and running Laptop HP Pavillion Entertainment DV6000 intel centrino duo 2GB of memory hpbsd# uname -a FreeBSD hpbsd.vic 7.0-BETA4 FreeBSD 7.0-BETA4 #0: Thu Dec 27 22:18:53 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HP03 i386 hpbsd# all wpi's necessary devices are compiled in the kernel device wpi device pci device wlan device wlan_amrr device firmware /var/log/messages kernel: wpi0: Intel(R) PRO/Wireless 3945ABG mem 0xd800-0xd8000fff irq 16 at device 0.0 on pci2 kernel: wpi0: Ethernet address: 00:19:d2:99:e3:cb kernel: wpi0: [ITHREAD] kernel: wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps kernel: wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps kernel: wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps the line legal.intel_wpi.license_ack=1 is in /boot/loader.conf BUT 1) it seems that sysctl is unable to find it and I have to set it via kenv legal.intel_wpi.license_ack=1 Shouldn't this variable be set by sysctl or by loader.conf? 2) dhclient is unable to get an IP address (trying to set wpi0 up with a fixed IP makes wpi0 not associated to any AP) Here it is a session log SNIP hpbsd# sysctl -a|grep legal hpbsd# hpbsd# kenv legal.intel_wpi.license_ack=1 legal.intel_wpi.license_ack=1 hpbsd# kenv legal.intel_wpi.license_ack 1 hpbsd# ifconfig wpi0 ssid my_wireless weptxkey 1 wepmode on wepkey 0x1f7b0a5a0d hpbsd# dhclient wpi0 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wpi0 to 255.255.255.255 port 67 interval 5 No DHCPOFFERS received. No working leases in persistent database - sleeping. hpbsd# ifconfig wpi0 wpi0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:19:d2:99:e3:cb inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) status: associated ssid my_wireless channel 6 (2437 Mhz 11g) bssid 00:02:cf:61:81:fd authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit txpower 50 bmiss 7 scanvalid 60 protmode CTS /SNIP Even giving an ip fixed address to wpi0 doesn't seem to work, I cannot ping anything and for netstat -rn wpi0 doesn't seem to exist. Please help Ciao from Rome -- Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Rebuilding /var/db/pkg
I committed a crime! While upgrading the ports under the newly installed RELENG_7 (beta4) with portupgrade -arRk I **deleted ** the directory /var/db/pkg. Is there any way to rebuild it from scratch? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Compilation error libpcre.so.0: ELF file OS ABI invalid
Context: Intel Core Duo, FreeBSD 6.2-p7, latest portsnap, gcc-4.2.2. Updating the statistical program R, some packages fail to compile (I use tarballs) because this cryptic error pops up * Installing *source* package 'MCMCpack' ... checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... grep: error while loading shared libraries: /usr/local/lib/libpcre.so.0: ELF file OS ABI invalid yes checking whether c++ accepts -g... grep: error while loading shared libraries: /usr/local/lib/libpcre.so.0: ELF file OS ABI invalid yes It seems that during the compilation a-linux-connected-lib is being looked for, doesn't it? Anyway, what should I do? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Missing libgfortran: what package is it in?
I'm trying to update some packages of R. In compiling them freebsd 6.2 fails systematically because a libgfortran library is missing (and, as a matter of fact, it is!). What package should I install to have these lib available? Ciao Vittorio --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Nvidia doesn't start on cryptic errors
Il Tuesday 29 May 2007 20:11:00 [EMAIL PROTECTED] ha scritto: What nVidia driver are you trying to install and does your laptop have an I'm installing the latest snapshot of the port /usr/ports/x11/nvidia-driver and on my new laptop there is a label saying graphics by NVIDIA GeForce Go 7400 Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Unable to open /nvidiactl
Tricky but at last I detected the cause of the problem: I had a acpi_video_load=YES in loader.conf which loaded the module acpi_video.ko. Eliminating this module with kldunload (and then deleting the line from loader.conf) *** out of the blue nvidia started working great. Ciao Vittorio Il Wednesday 30 May 2007 16:57:20 ml-vic ha scritto: Dear friends, I'm still looking for help to solve the problem of my nvidia graphic card. nvidia.ko doesn't seem able to create /dev/ndiviactl. Synthesis My system Intel Centrino Duo T5300 HP Pavillion 6366 notebook 2GB mem NVIDIA GeForce Go 7400 FreeBSD 6.2-RELEASE-p4 i386 kernel compiled for SMP Latest snapshot of the ports 1) I installed and compiled the /usr/ports/x11/nvidia-driver with default options and /usr/ports/x11/nvidia-xconfig; because loader.conf was not automatically modified I added a nvidia_load=YES to loader.conf and rebooted the pc, therefore: 2) victor$ kldstat Id Refs Address Size Name 1 36 0xc040 5a1fa0 kernel 2 1 0xc09a2000 3244 splash_bmp.ko 3 1 0xc09a6000 5528 vesa.ko 4 3 0xc0a6c000 1e058 linux.ko 5 1 0xc0a8b000 435c acpi_video.ko 6 3 0xc0a9 61ba0 acpi.ko 7 1 0xc0af2000 6d4de0 nvidia.ko 8 2 0xc11c7000 168fc agp.ko (agp is not compiled statically in the kernel) victor$ sysctl -a|grep nvidia nvidia 84 37K - 84 16,32,64,128,256,1024,2048 hw.nvidia.version: NVIDIA UNIX x86 Kernel Module 1.0-9746 Tue Dec 19 13:20:59 PST 2006 hw.nvidia.registry.EnableVia4x: 0 hw.nvidia.registry.EnableALiAGP: 0 hw.nvidia.registry.NvAGP: 3 hw.nvidia.registry.EnableAGPSBA: 0 hw.nvidia.registry.EnableAGPFW: 0 hw.nvidia.registry.SoftEDIDs: 1 hw.nvidia.registry.Mobile: 4294967295 hw.nvidia.registry.ResmanDebugLevel: 4294967295 hw.nvidia.registry.FlatPanelMode: 0 hw.nvidia.registry.DevicesConnected: 0 hw.nvidia.registry.RmLogonRC: 1 hw.nvidia.registry.DetectPrimaryVga: 1 hw.nvidia.registry.dwords: 3) I generated a basic xorg.conf file running a mere nvidia-xconfig that I tailored only tailored for language. 4) startx fails. The system declares NVIDIA: could not open the device /dev/nvidiactl (as a matter of fact there isn't!) And Xorg.0.log is as follows X Window System Version 6.9.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: FreeBSD 6.2 i386 [ELF] Current Operating System: FreeBSD hpbsd.vic 6.2-RELEASE-p4 FreeBSD 6.2-RELEASE-p4 #0: Mon May 28 11:43:57 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HP01 i386 Build Date: 10 February 2007 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon May 28 19:39:50 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Layout0 (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Device0 (**) |--Input Device Keyboard0 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout it (**) XKB: layout: it (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse0 (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/li b/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/b itstream-vera,/usr/local/share/fonts (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so (II) Module bitmap: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27a0 card 103c,30bb rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,27a1 card , rev 03 class
Re: Nvidia doesn't start on cryptic errors
Il Monday 28 May 2007 18:16:30 Garrett Cooper ha scritto: Vittorio De Martino wrote: Il Monday 28 May 2007 14:51:04 John Nielsen ha scritto: On Monday 28 May 2007 11:18:07 Vittorio De Martino wrote: On my newly bought HP pavillion 6366 notebook with freebsd 6.2 - p4 and one of the latest portsnap I have an nvidia go 7400 card, *** fully *** supported by the nvidia driver according to the docs. I followed the minimal configuration by nvidia-xconfig and just taiored the language for the keyboardBUT startx fails to load X and in the log file I find I find the below reported errors. Being a beginner I find myself somewhat disorientated by these errors that I couldn't find surfing the net. (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. (EE) NVIDIA(0): *** Aborting *** Not too cryptic. Make sure that the nvidia kernel module is loaded and try again. To verify, type kldstat. If nvidia.ko is not listed, type kldload nvidia. To load it automatically on boot (which is the only way for it to load successfully), add a line like this to /boot/loader.conf: nvidia_load=YES Then reboot. Actually the nvidia.ko mdule was and is loaded hpbsd# kldstat Id Refs AddressSize Name 1 24 0xc040 5b33d8 kernel .. 43 0xc0a7e000 1e058linux.ko 51 0xc0a9d000 435c acpi_video.ko 63 0xc0aa2000 61ba0acpi.ko 71 0xc0b04000 6d4de0 nvidia.ko 81 0xc11d9000 aed4 cpufreq.ko 91 0xc11e4000 4a2c acpi_ibm.ko .. 151 0xc7245000 2000 rtc.ko I was able to eliminate the following error (II) LoadModule: wfb (II) Loading /usr/X11R6/lib/modules/libwfb.so dlopen: Shared object librpcsvc.so.2 not found, required by libwfb.so (EE) Failed to load /usr/X11R6/lib/modules/libwfb.so -- because the required librpcsvc.so.2 has become (and is presente as) librpcsvc.so.3. Therefore I linked ln -s librpcsvc.so.3 librpcsvc.so.2 That's ok now BUT NVIDIA: could not open the device /dev/nvidiactl (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. still something incorrect prevents startx to fire X. The problems seems to be /dev/nvidiactl! Please help - Vittorio Add yourself to the video group and chown/mod the /dev node until you have read, write, and executable access. -Garrett Still doen't work! I mean, to put it in a nutshell: 1) kldstat shows the nvidia.ko module BUT no /dev/nvidia0 nor /dev/nvidiactl is present and this seems to cause the failure of startx 2) I have the following which seems far less than what I can see surfing the net (e.g. something like Idontremember.nvidia.0.%desc, and the likes): hpbsd # sysctl -a|grep nvidia nvidia8437K - 84 16,32,64,128,256,1024,2048 hw.nvidia.version: NVIDIA UNIX x86 Kernel Module 1.0-9746 Tue Dec 19 13:20:59 PST 2006 hw.nvidia.registry.EnableVia4x: 0 hw.nvidia.registry.EnableALiAGP: 0 hw.nvidia.registry.NvAGP: 3 hw.nvidia.registry.EnableAGPSBA: 0 hw.nvidia.registry.EnableAGPFW: 0 hw.nvidia.registry.SoftEDIDs: 1 hw.nvidia.registry.Mobile: 4294967295 hw.nvidia.registry.ResmanDebugLevel: 4294967295 hw.nvidia.registry.FlatPanelMode: 0 hw.nvidia.registry.DevicesConnected: 0 hw.nvidia.registry.RmLogonRC: 1 hw.nvidia.registry.DetectPrimaryVga: 1 hw.nvidia.registry.dwords: Again HELPCiao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Nvidia doesn't start on cryptic errors
On my newly bought HP pavillion 6366 notebook with freebsd 6.2 - p4 and one of the latest portsnap I have an nvidia go 7400 card, *** fully *** supported by the nvidia driver according to the docs. I followed the minimal configuration by nvidia-xconfig and just taiored the language for the keyboardBUT startx fails to load X and in the log file I find I find the below reported errors. Being a beginner I find myself somewhat disorientated by these errors that I couldn't find surfing the net. Please help Ciao Vittorio extract from Xorg.0.log (II) LoadModule: glx (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor=NVIDIA Corporation compiled for 4.0.2, module version = 1.0.9746 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: nvidia (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor=NVIDIA Corporation compiled for 4.0.2, module version = 1.0.9746 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 1.0-9746 Tue Dec 19 13:23:45 PST 2006 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) Loading sub module fb (II) LoadModule: fb (II) Loading /usr/X11R6/lib/modules/libfb.so (II) Module fb: vendor=X.Org Foundation compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module wfb (II) LoadModule: wfb (II) Loading /usr/X11R6/lib/modules/libwfb.so dlopen: Shared object librpcsvc.so.2 not found, required by libwfb.so (EE) Failed to load /usr/X11R6/lib/modules/libwfb.so (II) UnloadModule: wfb (EE) Failed to load module wfb (loader failed, 7) (II) Loading sub module ramdac (II) LoadModule: ramdac (II) Loading /usr/X11R6/lib/modules/libramdac.so (II) Module ramdac: vendor=X.Org Foundation compiled for 6.9.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (II) resource ranges after xf86ClaimFixedResources() call: . (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: nvidia (II) UnloadModule: ramdac (II) UnloadModule: fb (EE) Screen(s) found, but none have a usable configuration. /extract from Xorg.0.log ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Nvidia doesn't start on cryptic errors
Il Monday 28 May 2007 14:51:04 John Nielsen ha scritto: On Monday 28 May 2007 11:18:07 Vittorio De Martino wrote: On my newly bought HP pavillion 6366 notebook with freebsd 6.2 - p4 and one of the latest portsnap I have an nvidia go 7400 card, *** fully *** supported by the nvidia driver according to the docs. I followed the minimal configuration by nvidia-xconfig and just taiored the language for the keyboardBUT startx fails to load X and in the log file I find I find the below reported errors. Being a beginner I find myself somewhat disorientated by these errors that I couldn't find surfing the net. (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. (EE) NVIDIA(0): *** Aborting *** Not too cryptic. Make sure that the nvidia kernel module is loaded and try again. To verify, type kldstat. If nvidia.ko is not listed, type kldload nvidia. To load it automatically on boot (which is the only way for it to load successfully), add a line like this to /boot/loader.conf: nvidia_load=YES Then reboot. Actually the nvidia.ko mdule was and is loaded hpbsd# kldstat Id Refs AddressSize Name 1 24 0xc040 5b33d8 kernel .. 43 0xc0a7e000 1e058linux.ko 51 0xc0a9d000 435c acpi_video.ko 63 0xc0aa2000 61ba0acpi.ko 71 0xc0b04000 6d4de0 nvidia.ko 81 0xc11d9000 aed4 cpufreq.ko 91 0xc11e4000 4a2c acpi_ibm.ko .. 151 0xc7245000 2000 rtc.ko I was able to eliminate the following error (II) LoadModule: wfb (II) Loading /usr/X11R6/lib/modules/libwfb.so dlopen: Shared object librpcsvc.so.2 not found, required by libwfb.so (EE) Failed to load /usr/X11R6/lib/modules/libwfb.so -- because the required librpcsvc.so.2 has become (and is presente as) librpcsvc.so.3. Therefore I linked ln -s librpcsvc.so.3 librpcsvc.so.2 That's ok now BUT NVIDIA: could not open the device /dev/nvidiactl (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. still something incorrect prevents startx to fire X. The problems seems to be /dev/nvidiactl! Please help - Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Confusion between latex teTeX ports
I've been happily using latex, pdflatex and context for five years now. Now, because a port complains for the absence of a psfonts.sty file which seems to be presente in the latex port I tried to install this port BUT I can't make head or tail of the fact that if I try to install the port /usr/ports/print/latex while teTeX-base teTeX-texmf are installed they conflict stat# make install === Installing for latex2e-2003.12_1 === latex2e-2003.12_1 conflicts with installed package(s): teTeX-base-3.0_10 teTeX-texmf-3.0_5 They install files into the same place. Please remove them first with pkg_delete(1). *** Error code 1 Stop in /usr/ports/print/latex. Why is that? I thought that latex was part of/ a subset of the wider teTeX port, therefore there's no reason why they should conflict. Isn't that true OR or is latex considered a different port/code with different libs and executable? Please clarify this point. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeMat 3.0 doesn't call functions and help
Il Sunday 22 April 2007 21:38:12 Thierry Thomas ha scritto: Le Jeu 19 avr 07 à 1:00:38 +0200, Vittorio De Martino [EMAIL PROTECTED] écrivait : I have just upgraded FreeMAT to 3.1, which fixes the inv() problem, and which should fix this Help on line bug too; could you please check it? Yes, with the new version 3.1 inv now works fine. Unfortunately the Help on line still doesn't work. I think that something worsened because with this new port now I cannot use the help on line even as root (in the previous version Help online as root worked quite well). Could you please script (1) a session with only `truss FreeMat', just calling the help and exiting? Then please send me the compresed log of this session. If you had created some symlinks, please don't forget to remove them. Regards, I cannot truss anything victor# truss /bin/echo hello truss: cannot open /proc/curproc/mem: No such file or directory any other solution or workaround? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeMat 3.0 doesn't call functions and help
Il Sunday 15 April 2007 22:11:12 Thierry Thomas ha scritto: Le Lun 9 avr 07 à 16:39:49 +0200, Vittorio De Martino [EMAIL PROTECTED] écrivait : P.S. By the way, launching FreeMat as root the Help on line works whilst inv still doesn't work. Ciao Vittorio Hello, I have just upgraded FreeMAT to 3.1, which fixes the inv() problem, and which should fix this Help on line bug too; could you please check it? Yes, with the new version 3.1 inv now works fine. Unfortunately the Help on line still doesn't work. I think that something worsened because with this new port now I cannot use the help on line even as root (in the previous version Help online as root worked quite well). Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
koffice ports fails to compile kspread
On a 6.2 i386 box I'm unable to compile koffice 1.6.2 kspread because a cryptic errors Error code 2 pops up. See the attached log and ... please help. Ciao Vittorio ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Advice on how to memorize images
I'm now moving my first steps in trying to memorize my many digital photos (for the time being some 700 pictures but rapifdly growing, average size among 800-900kb) in a centralised system easy to deal with. I'm now successfully (but still in an experimental level) using a postgresql 8.0.2 db with its wonderful lo_creat, lo_export, etc functions. Unfortunately I've read in the internet many criticism on the use of mysql or pgsql db to memorize images, that this is not an efficient way to do the job (no alternatives seem to be proposed anyway!) because the db easily becomes cumbersome (isn't that the core business of a great db such as mysql or pgsql?). Could someone out there tell an almost definite word on this subject with some suggestions (other applications?) based on real experience? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeMat 3.0 doesn't call functions and help
Alle 09:18, domenica 08 aprile 2007, Thierry Thomas ha scritto: Le Sam 7 avr 07 à 21:24:05 +0200, Vittorio De Martino .. I had forgotten about that, but I think that the first time I had launched FreeMat -i /usr/local/share/FreeMat-3.0 and then it uses QSettings to store this path persistently. . No, it still doesn't work. I launched what you suggested (see below) then again 'FreeMat' but when I ask for the Help on line nothing happens and the system answer as below (see QTextBrowser's lines) victor$ FreeMat -i /usr/local/share/FreeMat-3.0/ FreeMat root path set to '/usr/local/share/FreeMat-3.0/' victor$ FreeMat QTextBrowser: Cannot open 'file:///index.html' for reading QTextBrowser: No document for file:///index.html Ciao Vittorio P.S. By the way, launching FreeMat as root the Help on line works whilst inv still doesn't work. Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeMat 3.0 doesn't call functions and help
I've just installed FreeMat 3.0 from the ports in my i386 6.2 box but, while it is able to accomplish simple calculations it is not able to use the functions e.g to invert a matrix a=[1,2;-4,3] inv(a) instead of inverting the matrix hangs endlessly. Besides if I ask for the help on line (OR helpwin) the following error messages pops up The file modules.txt is missing from the directory where I think help files should be. I think I didn't configure something but I don't know what (the main.pdf manual isn't that helpful as far as the installation is concerned). Could someone out there help me to start FreeMat? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Bluetooth problems
I'm unable to use a bluetooth connection between my fbsd 6.2 laptop and my Nokia cell . As you can see below I can l2ping the cell but not other connection are possible. Also the Nokia cell fails to connect to the new device, the laptop, even though it perceives the device. Could you please give a helpful hand to this absolute bluetooth beginner? Ciao Vittorio #/etc/bluetooth/hosts # BD_ADDR Name [ alias0 alias1 ... ] # 00:11:22:33:44:55 phone 00:12:d2:65:c2:03 NokiaVic % kldstat Id Refs AddressSize Name 1 32 0xc040 48fd20 kernel 21 0xc089 3224 splash_bmp.ko 31 0xc0894000 5528 vesa.ko 41 0xc095a000 435c acpi_video.ko 53 0xc095f000 61bc0acpi.ko 61 0xc09c1000 aed4 cpufreq.ko 71 0xc09cc000 4a2c acpi_ibm.ko 81 0xc09d1000 7ea4 ng_ubt.ko 96 0xc09d9000 d6dc netgraph.ko 101 0xc35ac000 7000 linprocfs.ko 111 0xc35b3000 6000 procfs.ko 122 0xc35b9000 6000 pseudofs.ko 132 0xc35c 19000linux.ko 141 0xc35d9000 4000 sysvshm.ko 151 0xc35e2000 5000 sysvsem.ko 161 0xc35f5000 4000 sysvmsg.ko 171 0xc36db000 2000 rtc.ko 181 0xc4064000 3000 wlan_wep.ko 191 0xc4068000 e000 if_iwi.ko 202 0xc4076000 3000 firmware.ko 211 0xc4082000 3iwi_bss.ko 224 0xc40ce000 2000 ng_bluetooth.ko 231 0xc40d d000 ng_hci.ko 241 0xc40dd000 f000 ng_l2cap.ko 251 0xc40fc000 19000ng_btsocket.ko 261 0xc411d000 4000 ng_socket.ko % mc % hccontrol -n ubt0hci remote_name_request NokiaVic BD_ADDR: NokiaVic Name: NokiaVic % hccontrol -n ubt0hci remote_name_request 00:12:d2:65:c2:03 Status: Page timeout [0x4] % hccontrol -n ubt0hci remote_name_request NokiaVic BD_ADDR: NokiaVic Name: NokiaVic % hccontrol -n ubt0hci read_connection_list Remote BD_ADDRHandle Type Mode Role Encrypt Pending Queue State % /etc/rc.d/rc.bluetooth start ubt0 BD_ADDR: 00:11:f6:07:cb:b8 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80 3-Slot 5-Slot Encryption Slot offset Timing accuracy Switch Hold mode Sniff mode Park mode RSSI Channel quality SCO link HV2 packets HV3 packets u-law log A-law log CVSD Paging scheme Power control Transparent SCO data Unknown2.7 Max. ACL packet size: 384 bytes Number of ACL packets: 8 Max. SCO packet size: 64 bytes Number of SCO packets: 8 % hccontrol -n ubt0hci read_connection_list Remote BD_ADDRHandle Type Mode Role Encrypt Pending Queue State % hccontrol -n ubt0hci remote_name_request NokiaVic Status: Page timeout [0x4] % hccontrol -n ubt0hci inquiry Inquiry result, num_responses=1 Inquiry result #0 BD_ADDR: NokiaVic Page Scan Rep. Mode: 0x1 Page Scan Period Mode: 0x2 Page Scan Mode: 00 Class: 50:02:0c Clock offset: 0x3d19 Inquiry complete. Status: No error [00] % hccontrol -n ubt0hci remote_name_request 00:12:d2:65:c2:03 BD_ADDR: NokiaVic Name: NokiaVic % hccontrol -n ubt0hci read_connection_list Remote BD_ADDRHandle Type Mode Role Encrypt Pending Queue State % l2ping -a NokiaVic 0 bytes from NokiaVic seq_no=0 time=2264.361 ms result=0 0 bytes from NokiaVic seq_no=1 time=94.771 ms result=0 0 bytes from NokiaVic seq_no=2 time=52.969 ms result=0 0 bytes from NokiaVic seq_no=3 time=59.167 ms result=0 0 bytes from NokiaVic seq_no=4 time=49.362 ms result=0 % l2control -a 00:12:d2:65:c2:03 read_channel_list l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down % l2control -a NokiaVic read_channel_list l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down % btsockstat % /etc/rc.d/rc.bluetooth stop ubt0 % /etc/rc.d/rc.bluetooth start ubt0 BD_ADDR: 00:11:f6:07:cb:b8 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80 3-Slot 5-Slot Encryption Slot offset Timing accuracy Switch Hold mode Sniff mode Park mode RSSI Channel quality SCO link HV2 packets HV3 packets u-law log A-law log CVSD Paging scheme Power control Transparent SCO data Unknown2.7 Max. ACL packet size: 384 bytes Number of ACL packets: 8 Max. SCO packet size: 64 bytes Number of SCO packets: 8 % btsockstat % l2control -a 00:12:d2:65:c2:03 read_channel_list l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down % /etc/rc.d/rc.bluetooth start ubt0 BD_ADDR: 00:11:f6:07:cb:b8 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80 3-Slot 5-Slot Encryption Slot offset Timing accuracy Switch Hold mode Sniff mode Park mode RSSI Channel quality SCO link HV2 packets HV3 packets u-law log A-law log CVSD Paging scheme Power control Transparent SCO data Unknown2.7 Max. ACL packet size: 384 bytes Number of ACL packets: 8 Max. SCO packet size: 64 bytes Number of SCO packets: 8 % l2control -a NokiaVic read_channel_list l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down % hccontrol -n ubt0hci remote_name_request 00:12:d2:65:c2:03 Status: Page timeout [0x4] % hccontrol -n ubt0hci remote_name_request
Howto prelink to boost performance
In an openbsd ML I have read that it is possible for a desktop instalation to improve the performance by using the prelinking ability of openbsd similar to that of linux. here the key sentence: prelinking... can be enabled using `ldconfig -P /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin /usr/X11R6/bin'. This should result in a noticeable speed increase, especially on programs with lots of loaded libraries (mozilla, firefox, etc.) In freebsd 6.2 the option -P doesn't seem to exist for ldconfig. How could I - under freebsd - get the same result (prelink I mean!)? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gtk-2.10.9 doesn't compile
As requested, please find attached the complete, tarred log of gtk failed compilation. Ciao Vittorio -- Messaggio inoltrato -- Subject: Re: gtk-2.10.9 doesn't compile Date: 18:06, lunedì 12 febbraio 2007 From: Jeremy Messenger [EMAIL PROTECTED] To: Vittorio [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] On Mon, 12 Feb 2007 06:52:05 -0600, Vittorio [EMAIL PROTECTED] wrote: Dear All, Under a fresh installation of 6.2 I recently updated via portsnap the ports tree and recompiled what was needed (including portupgrade!), BUT after issuing as root: portupgrade gtk I obtain the following obscure, esoteric diagnostic: snip You have cutted out the important part. In general, it is always best to send a FULL log. While I am here, please follow this: http://www.freebsd. org/gnome/docs/bugging.html Cheers, Mezz gmake[2]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.9/gdk' gmake [1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.9' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/x11-toolkits/gtk20. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade.55166.1 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=gtk-2.10.7 UPGRADE_PORT_VER=2. 10.7 make ** Fix the problem and try again. /snip What shall I do? Ciao from Rome - Vittorio Ciao Vittorio -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gtk-2.10.9 doesn't compile
Dear All, Under a fresh installation of 6.2 I recently updated via portsnap the ports tree and recompiled what was needed (including portupgrade!), BUT after issuing as root: portupgrade gtk I obtain the following obscure, esoteric diagnostic: snip gmake[2]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.9/gdk' gmake [1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.9' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/x11-toolkits/gtk20. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade.55166.1 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=gtk-2.10.7 UPGRADE_PORT_VER=2. 10.7 make ** Fix the problem and try again. /snip What shall I do? Ciao from Rome - Vittorio Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.2 hangs probing floppy
Before eliminating fdc from the kernel I add another piece of info. If immediatedly after booting I put a floppy into the drive, the booting process goes on without problems. Any other. softer solution to tis problem. Vittorio Alle 17:51, martedì 30 gennaio 2007, Roland Smith ha scritto: On Tue, Jan 30, 2007 at 03:14:49PM +0100, Vittorio wrote: I updated my pentium 3 PC Compaq Desktop 450 from freebsd 5.3 (which was working like a charme indeed!) to the new 6.2 installing from a CD. It happens that the boot 1) runs smoothly as usual till after the probing of the CDs, 2) then the boot hangs for about 3 minutes probing the floppy (I see the floppy led turned on for the same time), 3) eventually again smoothly till the end of the booting process. I noticed that the /dev/fd0 device is not found and there's no way to mount it. Build a kernel without device fdc. Or maybe disable the floppy in the bios. Roland ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
6.2 hangs probing floppy
I updated my pentium 3 PC Compaq Desktop 450 from freebsd 5.3 (which was working like a charme indeed!) to the new 6.2 installing from a CD. It happens that the boot 1) runs smoothly as usual till after the probing of the CDs, 2) then the boot hangs for about 3 minutes probing the floppy (I see the floppy led turned on for the same time), 3) eventually again smoothly till the end of the booting process. I noticed that the /dev/fd0 device is not found and there's no way to mount it. What shall I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Renaming files in one shot
Under a directory I have many pdf files named according to M$ Windows rules, that is: Marylin Monroe.pdf James Stewart.pdf Alice in Wonderland.pdf Ludwig Van Beethoven.pdf . . Now I'd like to rename them ** IN ONE SHOT ** (some more steps would be acceptable anyway!) deleting all the blanks, that is MarylinMonroe.pdf JamesStewart.pdf AliceinWonderland.pdf LudwigVanBeethoven.pdf How can I do that? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
jail 127.0.0.x howto
Under freebsd 6.1 I set up an apache 2.0 server in a jail working on fxp0 10.155.1.10 and aliased as 10.155.1.11. It works like a charme. Now while IP 10.155.1.10 is a fixed IP address I've been assigned by my office network administrator (it is also in the office DNS) the aliased IP address, 10.155.1.11, is an abuse of mine just for the sake of trying if the jail worked. Because I'm entitled to have ** one** fixed IP only, I wonder how I can use the 127.0.0.x adddresses to setup the jail for apache, as I found suggested, better hinted, googling. A step by step example would be very helpful. How to set up the jail using the internal addresses? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: IPFW NFS
Well I tried something similar to your
ipfw add xxx allow udp from ${client} to ${server} ${nfsports} keep-state
ipfw add 300 allow udp from 10.0.0.2 to 10.0.0.1 2049,111,1022 setup
keep-state
(it differs from your line for the setup option).
It ddidn't worked at all.
Afterwards, following Cuck's advise, I had a go at modifying the ipfw firewall
in the nfs client 10.0.0.2 (no firewall for the time being on the nfs server
10.0.0.1) and added towards the end of the list, immediatedly before the very
laste line denying everything else
5 allow ip from 10.0.0.1 to 10.0.0.2
51000 allow ip from 10.0.0.2 to 10.0.0.1
65535 deny ip from any to any
It seemed to works partially! I mean that I could mount_nfs the share in
the client, surfing the directories, reading and writing files in the share,
BUT ... out of the blue, after some minutes the client freezed and I had to
reboot :-( brutally turning off and on the box.
Help please
Vittorio
Alle 05:25, giovedì 23 novembre 2006, Ian Smith ha scritto:
vittorio [EMAIL PROTECTED] wrote:
I have two FreeBSD 6.1 boxes one of which (IP 10.0.0.1) is an NFS server
and the other one (IP 10.0.0.2) is, among other things, an NFS client
sharing directories with the NFS server.
It all works correctly and I can mount_nfs all the directories from the
server.
BUT, I'm now trying to use an IPFW firewall both on the server and on
the client. My simple aim is to setup connections between the 10.0.0.1
server and the 10.0.0.2 client ** only **; no connections should be
possible with other clients!
Now I've tried the poor documentation I could find googling with the
keywords freebsd ipfw nfs to no avail, I cannot mount_nfs any share on
te client because something goes wrong with RPC.
Concentrating on the client side (no ipfw for the moment on teh server)
I tried the following
ipfw add 300 allow ip from 10.0.0.1 2049,111,1022 to 10.0.0.2 via fxp0
setup keep-state
OR
ipfw add 300 allow ip from 10.0.0.1 to 10.0.0.2 2049,111,1022 via fxp0
setup keep-state
OR
ipfw add 300 allow ip from 10.0.0.1 2049,111,1022 to me via fxp0 setup
keep-state
OR
ipfw add 300 allow ip from 10.0.0.1 to me 2049,111,1022 via fxp0 setup
keep-state
If I disable the firewall it all goes smootly.
Firstly, what Chuck and Bill said .. but some further points ..
Secondly, you don't specify port numbers with 'allow ip', which covers
tcp, udp and raw ip packets also; you want 'allow udp' here, unless of
course you're using NFS over TCP as well, where you'd need 'allow tcp'.
Note also that 'setup' only applies to TCP connections.
Thirdly, if you do want to use stateful rules on the client, you'll do
better doing them on your _outbound_ connections, something like:
ipfw add xxx allow udp from ${client} to ${server} ${nfsports} keep-state
If it were me I'd concentrate on the server side firewall rules (and
/etc/exports allowed hosts) both for allowing desired and disallowing
undesired connections, so not having to worry much about what client/s
may or may not be doing.
'man ipfw' is actually pretty good documentation, though there is a fair
bit to absorb there. I still read it before bedtime now and again :)
Ciao, Ian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
IPFW NFS
I have two FreeBSD 6.1 boxes one of which (IP 10.0.0.1) is an NFS server and the other one (IP 10.0.0.2) is, among other things, an NFS client sharing directories with the NFS server. It all works correctly and I can mount_nfs all the directories from the server. BUT, I'm now trying to use an IPFW firewall both on the server and on the client. My simple aim is to setup connections between the 10.0.0.1 server and the 10.0.0.2 client ** only **; no connections should be possible with other clients! Now I've tried the poor documentation I could find googling with the keywords freebsd ipfw nfs to no avail, I cannot mount_nfs any share on te client because something goes wrong with RPC. Concentrating on the client side (no ipfw for the moment on teh server) I tried the following ipfw add 300 allow ip from 10.0.0.1 2049,111,1022 to 10.0.0.2 via fxp0 setup keep-state OR ipfw add 300 allow ip from 10.0.0.1 to 10.0.0.2 2049,111,1022 via fxp0 setup keep-state OR ipfw add 300 allow ip from 10.0.0.1 2049,111,1022 to me via fxp0 setup keep-state OR ipfw add 300 allow ip from 10.0.0.1 to me 2049,111,1022 via fxp0 setup keep-state If I disable the firewall it all goes smootly. Could you please help me? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ipfw cups
As an IPFW newbye with the following rules I'm unable to use cupsd in the same box where ipfw is running; cups seems to hang endlessly (rule 631 is about the port 631). What ami I missing Ciao Vittorio # ipfw list 00500 check-state 00501 deny tcp from any to any established 00502 deny ip from any to any frag 00503 allow ip from any to any via lo0 00504 deny ip from any to any not verrevpath in 00505 deny ip from any to 127.0.0.0/8 00508 deny ip from 127.0.0.0/8 to any 00590 allow tcp from 10.155.100.0/24 to me dst-port 22,80 via iwi0 setup keep-state 00595 allow tcp from me to any dst-port 22,80,443 via iwi0 setup keep-state 00597 allow ip from me to any dst-port 20,21 out setup keep-state 00601 allow tcp from 10.155.100.0/24 to me dst-port 81,137-139,445 via iwi0 setup keep-state 00602 allow udp from 10.155.100.0/24 to me dst-port 123,81,137,138,139,445 via iwi0 setup keep-state 00603 allow tcp from me to 10.155.100.0/24 dst-port 81,137-139,445 via iwi0 setup keep-state 00604 allow udp from me to 10.155.100.0/24 dst-port 123,81,137,138,139,445 via iwi0 setup keep-state 00605 allow tcp from 10.155.100.0/24 to me dst-port 1024,5432,5900-5909 via iwi0 setup keep-state 00607 allow udp from 10.155.100.0/24 to me dst-port 1024,5432,5900-5909 via iwi0 setup keep-state 00608 allow tcp from any to 10.155.100.33 dst-port 1491 00609 allow tcp from 10.155.100.33 1491 to any 00610 allow tcp from me to any dst-port 53 out via iwi0 keep-state 00612 allow udp from me to any dst-port 53 out via iwi0 keep-state 00631 allow tcp from 10.155.100.0/24 to me dst-port 631 00650 allow tcp from any to any dst-port 25 out via iwi0 setup keep-state 00655 allow tcp from any to any dst-port 110 out via iwi0 setup keep-state 00700 allow icmp from 10.155.100.0/24 to any via iwi0 65535 deny ip from any to any ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R: Re: ipfw cups
This are my rules (line 631 is about the same port!):
Ciao - Vittorio
#ipfw list
00500 check-state
00501 deny tcp from any to any established
00502 deny ip from any to any frag
00503 allow ip from any to any via
lo0
00505 deny ip from any to 127.0.0.0/8
00508 deny ip from 127.0.0.0
/8 to any
00590 allow tcp from 10.155.0.0/16 to me dst-port 22,80,8080
via fxp0 setup keep-state
00595 allow tcp from me to any dst-port
22,80,8080,443 via fxp0 setup keep-state
00596 allow tcp from me to
10.155.222.37 dst-port 1524 setup keep-state
00601 allow tcp from
10.155.0.0/16 to me dst-port 81,137-139,445 via fxp0 setup keep-state
00602 allow udp from 10.155.0.0/16 to me dst-port
123,81,137,138,139,445 via fxp0 setup keep-state
00603 allow tcp from
me to any dst-port 81,137-139,445 via fxp0 setup keep-state
00604 allow
udp from me to any dst-port 123,81,137,138,139,445 via fxp0 setup keep-
state
00605 allow tcp from 10.155.0.0/16 to me dst-port
1024,3306,5432,5900-5909 via fxp0 setup keep-state
00607 allow udp from
10.155.0.0/16 to me dst-port 1024,3306,5432,5900 via fxp0 setup keep-
state
00608 allow tcp from any to 10.155.102.6 dst-port 1491
00609
allow tcp from 10.155.102.6 1491 to any
00610 allow tcp from me to any
dst-port 53 out via fxp0 keep-state
00612 allow udp from me to any dst-
port 53 out via fxp0 keep-state
00631 allow tcp from 10.155.0.0/16 to
me dst-port 631
00700 allow icmp from 10.155.0.0/16 to any via fxp0
65535 deny ip from any to any
Sorry for the way they're displayed but
I'm writing on an awful webmail
Ciao
Vittorio
Messaggio
originale
Da: [EMAIL PROTECTED]
Data: 3-ott-2006 7.08
A:
freebsd-questions@freebsd.org
Cc: Vittorio[EMAIL PROTECTED]
Ogg:
Re: ipfw amp; cups
On Mon, 2 Oct 2006 16:22:13 +0100 (GMT+01:00)
Vittorio [EMAIL PROTECTED] wrote:
To my ipfw firewall I have
added, according to what I found in the
internet, the following
rule to allow the use of cupsd on the same box:
00520 allow ip
from any to any dst-port 631 in
to no avail because it
is
not even checked as you can see below from the log (obtained from
kde kcontrol center trying (and failing) to display the connected
cups'
printers):
Am I missing something?
What should I
do?
Ciao
Vittorio
..
NbBSD# ipfw -td list
00500 check-state
00501 Mon Oct 2 17:10:13
2006 deny tcp from any to any established
00502
deny ip from any to any frag
00503 Mon Oct 2 17:10:13 2006 allow ip
from any to any via lo0
00514 deny ip from any
to any not
verrevpath in
00520 allow ip from
any to
any dst-port 631 in
00525 deny ip from
any to 127.0.0.0/8
...
...
00609 allow tcp from 10.155.102.6 1491 to
any
00610 allow tcp from me to any dst-port
53 out
via fxp0 keep-state
00612 allow
udp from me to
any dst-port 53 out via fxp0 keep-state
00700
allow icmp from 10.155.0.0/16 to any
via fxp0
65535 Mon Oct 2 17:10:13
2006 deny ip from any to any
can you please send your rules again , making sure there is no dates
inserted
all over the place?
thx
_
{Beto|Norberto|Numard} Meijome
Throughout the centuries there were
[people] who took first steps down new
paths armed only with their own
vision. Ayn Rand
I speak for myself, not my employer. Contents may
be hot. Slippery when wet.
Reading disclaimers makes you go blind.
Writing them is worse. You have been
Warned.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
ipfw cups
To my ipfw firewall I have added, according to what I found in the internet, the following rule to allow the use of cupsd on the same box: 00520 allow ip from any to any dst-port 631 in to no avail because it is not even checked as you can see below from the log (obtained from kde kcontrol center trying (and failing) to display the connected cups' printers): Am I missing something? What should I do? Ciao Vittorio .. NbBSD# ipfw -td list 00500 check-state 00501 Mon Oct 2 17:10:13 2006 deny tcp from any to any established 00502 deny ip from any to any frag 00503 Mon Oct 2 17:10:13 2006 allow ip from any to any via lo0 00514 deny ip from any to any not verrevpath in 00520 allow ip from any to any dst-port 631 in 00525 deny ip from any to 127.0.0.0/8 ... ... 00609 allow tcp from 10.155.102.6 1491 to any 00610 allow tcp from me to any dst-port 53 out via fxp0 keep-state 00612 allow udp from me to any dst-port 53 out via fxp0 keep-state 00700 allow icmp from 10.155.0.0/16 to any via fxp0 65535 Mon Oct 2 17:10:13 2006 deny ip from any to any ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IPFW protected sites
With my ipfw firewall I can't surf the protected sites (I think by means of the ssl protocol), those with the closed locker in the frame of the browser. How can I enable this sites from my freebsd 6.1 box? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
konqueror protected sites
I cannot access protected sites (such as those of internet banking, credit card and so on) with konqueror under kde because the process died unexpectedly) while I can smoothly surf them with other browsers like mozilla. What should I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ipfw, ftp and wget
I'm using ipfw as firewall. What rules should I add to use both wget and ftp from my box only towards the internet through my iwi0? (I found the following lines for ftp but they don't seem to work: .. ipfw add 45 allow tcp from any to any 21 in setup keep-state ipfw add 46 allow udp from any to any 21 in setup keep-state) Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IPFW doesn't resolve host names
Dear friends, I have a pentium 4 freebsd 6.1 server connected to my office win-xp lan. The server smoothly runs sshd, postgresql, samba (to connect some /home share and the office win filesystem), vncserver. Recently I added the following IPFW firewall (I'm an absolute beginner with it) which works ** almost correctly **. In fact, I can connect via ssh (putty under winxp), the pg database works, vncserver too, while samba connects to its local windows share but it's unable to connect to the lan filesystem because it is no longer possible to resolve the host names. if I ping a host the answer is invariably ping: cannot resolve matteo: Host name lookup failure even though I defined allow rules for port 53. Could you please help me? ### start of example ipfw rules script # ipfw -q -f flush # Delete all rules # Set defaults oif=fxp0 # out interface # Set defaults gw=10.155.102.6 cmd=ipfw -q add # build rule prefix ks=keep-state# just too lazy to key this each time $cmd 00500 check-state $cmd 00502 deny all from any to any frag $cmd 00501 deny tcp from any to any established $cmd 00503 allow all from any to any via lo0 $cmd 00505 deny all from any to 127.0.0.0/8 $cmd 00508 deny ip from 127.0.0.0/8 to any $cmd 00600 allow tcp from any to me dst-port 22, 80 via $oif setup $ks $cmd 00601 allow tcp from any to me dst-port 81,137,138,139,445 via $oif setup $ks $cmd 00602 allow tcp from any to me dst-port 5432, 5900-5909 via $oif setup $ks $cmd 00604 allow udp from any to me dst-port 81,137,138,139,445 via $oif setup $ks $cmd 00605 allow udp from any to me dst-port 5432, 5900 via $oif setup $ks $cmd 00606 allow tcp from any to $gw 1491 $cmd 00607 allow tcp from $gw 1491 to any $cmd 00610 allow tcp from me to any 53 out via $oif $cmd 00611 allow tcp from any 50 to me in via $oif $cmd 00612 allow udp from me to any 53 out via $oif $cmd 00613 allow udp from any 50 to me in via $oif $cmd 00700 allow icmp from any to any via $oif ### End of example ipfw rules script ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Acroread doesn't find a lib
Under freebsd 6.1 I have just portupgraded the ports acroread-7.0.8 and libXfixes-2.0.1_2. BUT #acroread /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/bin/acroread: error while loading shared libraries: libXfixes.so.3: cannot open shared object file: No such file or directory What should I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Creating pkg-plist - problems
Under 6.1 I'm trying to build a port (R-2.3.1) following the instructions in the porters-handbook and particularly I'm having a go at creating the pkg-plist file as suggested in the point 7.5 of http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/plist-autoplist.html now,there is said: Next, create a temporary directory tree into which your port can be installed, and install any dependencies. # mkdir /var/tmp/$(make -V PORTNAME) # mtree -U -f $(make -V MTREE_FILE) -d -e -p /var/tmp/$(make -V PORTNAME) # make depends PREFIX=/var/tmp/$(make -V PORTNAME) but, when I try: % make -V PORTNAME R BUT % mkdir /var/tmp/$(make -V PORTNAME) the answer is Nome di variabile non lecito that is variable name not allowed What's wrong with it? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Probelms with 'make clean'
Yesterday, after portsnap(-ping) with fetch update, first I upgraded the portupgrade port of my freebsd 6.1 fresh box by means of make;make deinstall reinstall clean Then I started to upgrade my kde installation issuing portupgrade 'kde*' but it invariably failed complaining: [an example with kdeaddons-konq-plugins-3.5.3] NbBSD# portupgrade 'kdead*' --- Session started at: Sun, 11 Jun 2006 09:42:59 + --- Upgrade of misc/konq-plugins started at: Sun, 11 Jun 2006 09:44:47 + --- Upgrading 'kdeaddons-konq-plugins-3.5.2' to 'kdeaddons-konq-plugins-3.5.3' (misc/konq-plugins) --- Build of misc/konq-plugins started at: Sun, 11 Jun 2006 09:44:47 + --- Building '/usr/ports/misc/konq-plugins' === Cleaning for qt-3.3.6_2 === Cleaning for gmake-3.80_2 === Cleaning for libtool-1.5.22_2 === Cleaning for kdebase-3.5.3_1 === Cleaning for kdelibs-3.5.3 make: don't know how to make clean. Stop *** Error code 2 So I had to recompile the ports with the usual make;make deinstall reinstall; which works smoothly but make clean [here is an example with kdeaccessibility 3.5.3] === Registering installation for kdeaccessibility-3.5.3 NbBSD# make clean === Cleaning for qt-3.3.6_2 === Cleaning for gmake-3.80_2 === Cleaning for libtool-1.5.22_2 === Cleaning for kdelibs-3.5.3 make: don't know how to make clean. Stop *** Error code 2 Where am I wrong? What did I mess up? AND... What should I do to fix it Ciao Vittorio PS With packages different from kde portupgrade and 'make clean' seem to work properly. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Latex TTF font installation:missing binaries
I'm trying to install new proprietary TTF fonts (helvetica neue) for use with pdflatex under freebsd 6.1. In doing so, I'm following the many docs on the subject found either under the fontinst and fonts dir of texmf-dist or in the internet (plenty somewhat misleading docs, indeed) but many important files seem to be missing in the latest fbsd tetex package. To start with I cannot find the encoding the encoding T1-WGL4.enc file needed by ttf2afm. Also seem to be far at bay ttf2pfm and ttf2pk binaries required, e.g., by the ttf2tex procedure. Am I out of the right way? Am I missing something? Please help Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: R, unixodbc easysoft problems
Yes, I have it ls -al /usr/compat/linux/lib/libm.so.6 lrwxr-xr-x 1 root wheel 13 15 Mar 14:32 /usr/compat/linux/lib/libm.so.6 - libm-2.3.2.so Vittorio Alle 13:18, giovedì 01 giugno 2006, Lowell Gilbert ha scritto: Vittorio [EMAIL PROTECTED] writes: I installed first, from the ports, unixodbc, then the latest oracle easysoft driver on my FBSD 6.1 box, following the included instructions. When using unixodbc with postgresql, plain sailing, it works like a charm! But when I try to connect via odbc to oracle (here an instance of the statistical software R) I get: 1: [RODBC] ERROR: state 01000, code 0, message [unixODBC][Driver Manager]Can't open lib '/usr/compat/linux/usr/local/easysoft/oracle/libesoracle.so' : Shared object libm.so.6 not found, required by libesoracle.so and issuing: /compat/linux/usr/bin/ldd -v libesoracle.so /compat/linux/usr/bin/ldd: /lib/ld-linux.so.2: not found ldd: /lib/ld- linux.so.2 $exited with unknown exit code (127) I understand that there's something to be set as far as libraries to be used linked are concerned. Do you have the missing library? On my system, it was installed by the linux_base port, and is /usr/compat/linux/lib/libm.so.6 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R, unixodbc easysoft problems
I installed first, from the ports, unixodbc, then the latest oracle easysoft driver on my FBSD 6.1 box, following the included instructions. When using unixodbc with postgresql, plain sailing, it works like a charm! But when I try to connect via odbc to oracle (here an instance of the statistical software R) I get: 1: [RODBC] ERROR: state 01000, code 0, message [unixODBC][Driver Manager]Can't open lib '/usr/compat/linux/usr/local/easysoft/oracle/libesoracle.so' : Shared object libm.so.6 not found, required by libesoracle.so and issuing: /compat/linux/usr/bin/ldd -v libesoracle.so /compat/linux/usr/bin/ldd: /lib/ld-linux.so.2: not found ldd: /lib/ld- linux.so.2 $exited with unknown exit code (127) I understand that there's something to be set as far as libraries to be used linked are concerned. Is there anyone out there able to point me at documents where the exact setting up of the easysoft oracle driver ** ON FBSD ** is explained OR able to explain how to set it up on the same OS? Thanks a lot - Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
unixODBC Oracle
I heavily use ODBC to connect to Postgresql, Mysql and Oracle 9 databases under windows xp using Access (the use of it is a corporate choice, you know). Under a freshly installed FreeBSD 6.1 on which I installed the latest PgSQL MySQL Oracle8-client together with unixODBC, I have no problem at all at setting up the two open-source DBs odbc.ini and odbcinst.ini lines of command but I am somewhat disorientated about the poor documentation I can find around in the net about how to set up an Oracle connection via unixODBC (by the way, I cannot ask my Company to buy something like EasySoft). On one hand the author of the freebsd port of the Oracle client says that his port is the essential client that you can use to connect to an oracle up to 9i db via unixODBC but no example of *.ini files for that kind of connection are given. Could you please clarify this subject to me? Ciao Grazie (Bye Thanks a lot) Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: NO_RESCUE option in make.conf
Alle 18:38, martedì 23 maggio 2006, Pietro Cerutti ha scritto: l On 5/23/06, vittorio [EMAIL PROTECTED] wrote: I know but: 1) I need more room on the hd of my dual boot laptop. You ain't gaining much space by removing /rescue. It takes 6.9M on my 6.1-STABLE. You may want to consider removing /usr/src and /usr/obj which take respectively 442M and 2G instead. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: NO_RESCUE option in make.conf
I always do it, of course. I meant that eliminating /rescue is ** one *** of the actions I take to spare juicy hd room. Ciao Vittoiro Alle 18:38, martedì 23 maggio 2006, Pietro Cerutti ha scritto: On 5/23/06, vittorio [EMAIL PROTECTED] wrote: I know but: 1) I need more room on the hd of my dual boot laptop. You ain't gaining much space by removing /rescue. It takes 6.9M on my 6.1-STABLE. You may want to consider removing /usr/src and /usr/obj which take respectively 442M and 2G instead. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: NO_RESCUE option in make.conf
I know but: 1) I need more room on the hd of my dual boot laptop. 2) I invariably dump FBSD slices partitions after a successful upgrade on a separate usb mass storage. 3) from time to time I back up my /home dir on my office lan fileserver (or on the same usb hd). Anyway, I'll give RESCUE a second chance (didn't know it was so important. Gonna read the handbook...) Ciao Vittorio Alle 21:19, lunedì 22 maggio 2006, Kris Kennaway ha scritto: On Mon, May 22, 2006 at 03:18:59PM +0100, Vittorio wrote: To update the system in my /etc/make.conf among other building(-world) options I put a: NO_RESCUE= true Which actually is not declared neither in the man page of make.conf nor in the /usr/share/examples/etc/make.conf file. Nonetheless it seems to work. Am I right? Why do you want to do this? The rescue tools are sometimes all that stands between being able to repair your system and having to reinstall it from scratch. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
NO_RESCUE option in make.conf
To update the system in my /etc/make.conf among other building(-world) options I put a: NO_RESCUE= true Which actually is not declared neither in the man page of make.conf nor in the /usr/share/examples/etc/make.conf file. Nonetheless it seems to work. Am I right? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Mergemaster fails when updating to 6.1
On a pentium 4 server I updated from 6.0 to 6.1 according to the suggested procedure: # 1. `cd /usr/src' (or to the directory containing your source tree). # 2. `make buildworld' # 3. `make buildkernel # 4. `make installkernel # 5. `reboot' . # 6. `mergemaster -p' # 7. `make installworld' # 8. `make delete-old' # 9. `mergemaster' But... mergemaster ended in a: .. install -o root -g wheel -m 644 freebsd.cf /var/tmp/temproot/etc/mail/sendmail.cf install -o root -g wheel -m 444 freebsd.submit.cf /var/tmp/temproot/etc/mail/submit.cf cd /usr/src/etc; install -o root - g wheel -m 644 /var/tmp/temproot/etc/ssh usage: install [-bCcpSsv] [- B suffix] [-f flags] [-g group] [-m mode] [-o owner] file1 file2 install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode] [-o owner] file1 ... fileN directory install -d [-v] [-g group] [-m mode] [-o owner] directory ... *** Error code 64 Stop in /usr/src/etc. *** FATAL ERROR: Cannot 'cd' to /usr/src/etc and install files to the temproot environment ... In /etc/make.conf I have SUP_UPDATE = yes SUP = /usr/local/bin/cvsup SUPFLAGS = -g -L 2 SUPHOST = cvsup.it.FreeBSD.org SUPFILE = /usr/local/etc/cvsup/stable-supfile PORTSSUPFILE = /usr/local/etc/cvsup/ports-supfile DOCSUPFILE = /usr/local/etc/cvsup/doc-supfile # CPUTYPE=p4 PERL_VER=5.8.8 PERL_VERSION=5.8.8 KERNCONF= SERVER5 NO_RESCUE =true NO_ATM= true # do not build ATM related programs and libraries NO_BLUETOOTH=true # do not build Bluetooth related stuff NO_CRYPT= true # do not build any crypto code NO_GAMES= true # do not build games (games/ subdir) NO_INET6= true # do not build IPv6 related programs and libraries NO_KERBEROS= true # do not build and install Kerberos 5 (KTH Heimdal) What's going on and what should I do? Ciao - Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problems with kde pam
After upgradind to 6.1 this new error pops in my log, when starting kde 3.5.2 kdm-bin: :0[621]: in openpam_dispatch(): /usr/lib/pam_unix.so: no pam_sm_open_session() but the kde session starts all the same. Now, # uname -a FreeBSD NbBSD.grtn 6.1-RELEASE FreeBSD 6.1-RELEASE #1: Wed May 10 13:00:26 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/LAPTOP8 i386 # cat /etc/pam.d/kde # # $FreeBSD: src/etc/pam.d/kde,v 1.6 2003/04/30 21:57:54 markm Exp $ # # PAM configuration for the kde service # # auth authrequiredpam_nologin.so no_warn #auth sufficient pam_krb5.so no_warn try_first_pass #auth sufficient pam_ssh.so no_warn try_first_pass authrequiredpam_unix.so no_warn try_first_pass # account #accountrequiredpam_krb5.so account requiredpam_unix.so # session #sessionoptionalpam_ssh.so session requiredpam_permit.so What should I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: public samba share annoyingly asking for password
Alle 17:47, martedì 02 maggio 2006, [EMAIL PROTECTED] ha scritto: On 5/2/06, Vittorio [EMAIL PROTECTED] wrote: Context: pentium 4, freebsd 6.0, samba 3.0.22, 6 windows 2000, NT,XP samba clients Dear friends, I'm writing to this ML because, googling the net on the subject reported below, it seems that samba works slightly differently according to the platform in which it is installed (I read of differences of behaviour between Fedora and Debian samba installations, or even between FC1 and FC2 installations). I setup a samba server connected to a very large *** original MS-windows LAN *** with the following smb.conf file. The aim is to put in a public read- only share all the programs we need to share. Now, the problem is that at boot time - after logging in the MS-windows client - windows 2000 or NT clients present the user with a pop-up window asking for a password to connect to the public share (I created the 'pcguest' freebsd user as a passwordless user and to 'smbpasswd pcguest' I didn't provide any password at all!). Clicking on OK the share is immediatedly connected and it all works. Nonetheless the pop-up window asking for a password is somewhat disturbing. By the way, windows XP clients don't seem to suffer from the same problem. They connect to the share smoothly, without asking anything as expected! Any idea to solve the problem? Ciao Vittorio ###smb.conf [global] workgroup = mygroup server string = FreeBSD map to guest = Bad User passdb backend = tdbsam security = user guest account = pcguest log file = /var/log/samba/log.% m load printers = No preferred master = No local master = No domain master = No dns proxy = No wins server = 10.100.10.38, 10.100.10.21 hosts allow = 10.100. [homes] comment = Home Directories read only = No browseable = No [public] comment = Deposit path = /home/pcguest guest only = Yes guest ok = Yes This is based on a slightly different experience with a Linux host, but my first guess is you want to add security = share to the public section to override the global security = user. For that share, you might also want force user = pcguest and some explicit commands for whether you want it write protected, but I'd see if the first solution solves your problem. Jordan ___ No, it doesn't work. The problem is still there on win 2k or NT clients. Any other option? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R 2.3.0 fails to compile: undefined reference to `R_running_as_main_program'
Last night , after portsnap(-ping) and trying to recompile the statistical software R from 2.2.1 to 2.3.0 I get the following: # cd /usr/ports/math/R # make === Building for R-2.3.0 `Makedeps' is up to date. `stamp-lo' is up to date. `Makedeps' is up to date. `stamp-lo' is up to date. `Makedeps' is up to date. `stamp-lo' is up to date. `Makedeps' is up to date. /usr/ports/math/R/work/R-2.3.0/lib/libR.so is unchanged cc -export-dynamic -L/usr/local/lib -o R.bin Rmain.o -L../.. /lib -lR Rmain.o(.text+0x14): In function `main': : undefined reference to `R_running_as_main_program' *** Error code 1 Stop in /usr/ports/math/R/work/R-2.3.0/src/main. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.3.0/src/main. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.3.0/src. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.3.0. *** Error code 1 Please help (I reported this to PR see http://www.freebsd.org/cgi/query-pr.cgi? pr=i386/96576) Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
public samba share annoyingly asking for password
Context: pentium 4, freebsd 6.0, samba 3.0.22, 6 windows 2000, NT,XP samba clients Dear friends, I'm writing to this ML because, googling the net on the subject reported below, it seems that samba works slightly differently according to the platform in which it is installed (I read of differences of behaviour between Fedora and Debian samba installations, or even between FC1 and FC2 installations). I setup a samba server connected to a very large *** original MS-windows LAN *** with the following smb.conf file. The aim is to put in a public read- only share all the programs we need to share. Now, the problem is that at boot time - after logging in the MS-windows client - windows 2000 or NT clients present the user with a pop-up window asking for a password to connect to the public share (I created the 'pcguest' freebsd user as a passwordless user and to 'smbpasswd pcguest' I didn't provide any password at all!). Clicking on OK the share is immediatedly connected and it all works. Nonetheless the pop-up window asking for a password is somewhat disturbing. By the way, windows XP clients don't seem to suffer from the same problem. They connect to the share smoothly, without asking anything as expected! Any idea to solve the problem? Ciao Vittorio ###smb.conf [global] workgroup = mygroup server string = FreeBSD map to guest = Bad User passdb backend = tdbsam security = user guest account = pcguest log file = /var/log/samba/log.% m load printers = No preferred master = No local master = No domain master = No dns proxy = No wins server = 10.100.10.38, 10.100.10.21 hosts allow = 10.100. [homes] comment = Home Directories read only = No browseable = No [public] comment = Deposit path = /home/pcguest guest only = Yes guest ok = Yes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cdrecord on Thinkpad T43
1) add or enable (uncommenting) the following lines to your kernel: device atapicam # isn't enable in the default kernel #SCSI Controllers device cd (cdrecord needs a SCSI cd emulation) 2) recompile the kernel It works on my thinkpad R51. Ciao Vittorio Alle 19:22, sabato 08 aprile 2006, Erin Sharmahd ha scritto: I've been having some problems getting cdrecord to work on my thinkpad. http://www.mathematik.uni-marburg.de/~schmidtm/ibm/index.php says: To burn CDs with cdrecord don't forget to enable atapicam during kernel configuration. In his kernel config, he used this with device atapicd, so I ran: [amon-re /root] cat /sys/i386/conf/GENERIC | grep atapicd device atapicd # ATAPI CDROM drives In the past (on Linux), I had always used 'cdrecord dev=/dev/cdrom', so I initially tried 'cdrecord dev=/dev/acd0', but I learned from 'cdrecord dev=help' that apparently open via UNIX device is not supported. SCSI Bus scanning is supposed to be supported, but when I run 'cdrecord -scanbus', it gives: [amon-re /root] cdrecord -scanbus Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Error 0. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. (it would be nice if cdrecord -scanbus didn't tell me to run it again... but that's a different issue) Here is some (hopefully) relevant information about my system: [amon-re /root] uname -a FreeBSD amon-re 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #1: Sat Feb 11 21:55:30 MST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 [amon-re /root] sysctl -a | grep -i cd kern.cam.cd.changer.min_busy_seconds: 5 kern.cam.cd.changer.max_busy_seconds: 15 allocdirect 4 1K -79793 128 acd_driver 1 2K -1 2048 cdev31 4K - 31 128 debug.sizeof.cdev: 184 debug.sizeof.cdev_priv: 216 dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT dev.cbb.0.%location: slot=0 function=0 handle=\_SB_.PCI0.PCI1.CDBS dev.acd.0.%desc: MATSHITADVD-RAM UJ-822S/1.61 dev.acd.0.%driver: acd dev.acd.0.%parent: ata1 [amon-re /root] dmesg | grep -i cd acpi_ec0: Embedded Controller: GPE 0x1c, ECDT port 0x62,0x66 on acpi0 acd0: DVDR MATSHITADVD-RAM UJ-822S/1.61 at ata1-master UDMA33 I'd appreciate any help that anyone can provide. I'm somewhat stumped, and I'm not seeing much on google regarding this problem. Thanks! ~Erin -- http://www.tuxgirl.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
libiconv doesn't compile
I tried cd /usr/ports/converters/libiconv make install but... :.. ... if test -n ; then install -o root -g wheel -m 444 /usr/local/lib/. new mv /usr/local/lib/.new /usr/local/lib/ ; fi cd srclib make install prefix='/usr/local' exec_prefix='/usr/local' libdir='/usr/local/lib' cd src make install prefix='/usr/local' exec_prefix='/usr/local' libdir='/usr/local/lib' test `ls -ld . | sed - e 's/^d\(.\).*/\1/'` = rwxrwxrwx || chmod 777 . if [ ! -d /usr/local ] ; then /bin/sh ../autoconf/mkinstalldirs /usr/local ; fi if [ ! -d /usr/local ] ; then /bin/sh ../autoconf/mkinstalldirs /usr/local ; fi if [ ! -d /usr/local/bin ] ; then /bin/sh .. /autoconf/mkinstalldirs /usr/local/bin ; fi case freebsd6.0 in hpux*) cc `if test -n ''; then /usr/local/bin; fi` iconv.o .. /srclib/libicrt.a -L/usr/local/lib -liconv -lintl -o iconv;; freebsd*) /bin/sh ../libtool --mode=link cc `if test -n ''; then /usr/local/bin; fi` iconv.o ../srclib/libicrt.a ../lib//libiconv.la - lintl -o iconv;; *) /bin/sh ../libtool --mode=link cc `if test -n ''; then /usr/local/bin; fi` iconv.o ../srclib/libicrt.a /usr/local/lib/libiconv.la -lintl -o iconv;; esac cc iconv.o -o . libs/iconv ../srclib/libicrt.a ../lib//.libs/libiconv.so -lintl -Wl,-- rpath -Wl,/usr/local/lib /usr/bin/ld: cannot find -lintl *** Error code 1 .. What's the matter with it? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 10 years of The Complete FreeBSD (5150)
Alle 23:18, venerdì 24 febbraio 2006, Bill Schoolcraft ha scritto: Greg, I want to thank you for you help in making FreeBSD what it is today. ... I want to thank Greg too for his great book. As an experienced linux user after reading it I was able to move safely and -above all- in a logical organized way from linux to freebsd 5.3. Any other way (asking the mailing lists, e.g.) would have been fragmented, tiring, boring, slippery, etc. I meanyou can effectively ask the mailing lists once you know about the basic and skeleton of FreeBSD. Thanks Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with locale entropy (what's that?)
On a (mainly) postgresql pentium 4 server at office I upgraded freebsd 5.4 to 6 by means of a CD with the standard ISO downloaded from ftp.freebsd.org (I can't use any alternative means becuase of the tight rules of security of our network). I tailored and compiled the kernel and upgraded the system by the usual commands: make buildword boot mergemaster -p make installworld mergemaster boot The locale is Italian and the system speaks Italian, for instance mc. Not it happens that when launching 010.pgsql start, apache.sh start, etc. they all start issuing the following warning --: not found Besides, after upgrading to 6, I go on receiving each 11 minutes the following email Date: Wed, 25 Jan 2006 18:00:00 +0100 (CET) From: [EMAIL PROTECTED] (Cron Daemon) To: [EMAIL PROTECTED] Subject: Cron [EMAIL PROTECTED] /usr/libexec/save-entropy X-Cron-Env: SHELL=/bin/sh X-Cron-Env: PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin X-Cron-Env: HOME=/ X-Cron- Env: LOGNAME=operator X-Cron-Env: USER=operator --: not found /var/log/messages doesn't say anything related to this. Could you give me a helpful hand? Ciao Vittorio --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with pgsql 8.0.4 freebsd 6: partially solved
I have been using a postgresql 8.0.4 server under freebsd 5.4 like a charm for a long time . Yesterday, I upgraded freebsd from 5.4 to 6 via the CD (the iso was downloaded from ftp.freebsd.org). Restating postgresql it happened: # /usr/local/etc/rc.d/010.pgsql.sh start --: not found FATAL: XX000: failed to initialize lc_messages to LOCATION: InitializeGUCOptions, guc.c:3699 # And the server was down After many attempts I discovered that the problem was connected to the setenv LC_ALL it_IT.ISO_8859-1 I had introduced in /usr/local/pgsql/. cshrc which corrupted something in the system and, even removing the line, 010.pgsql.sh went on failing to start the server Having pg_dumped the data before the upgrading to 6, I have solved the problem by 1) eliminating the /usr/local/pgsql/data directory (BY THE WAY, remember to backup the pgsql *.conf files somewhere!!); 2) deinstalling the postgresql 8.0.4 server by means of make deinstall; 3) removing the pgsql user; 4) reinstalling the postgresql 8.0.4 server; 5) copying the *.conf files under the data directory 6) pg_restoring the data Now, of course I have left unmodified the .cshrc file (take notice that any attempt of modyfying the locale corrupts the postgresql server and you should start with a new reinstallation! I failed both adding a line setenv LC_ALL it_IT.ISO_8859-1 and setenv LC_ALL it_IT.ISO8859-1) Now it all works even though an inoffensive warning comes up # /usr/local/etc/rc.d/010.pgsql.sh start --: not found Is there anything else I could do? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Backing up an encrypted partition
From time to time I backup up my ad0s3a and ad0s3d partitions by means of dump issuing a 'dump -a0f fileA /dev/ad0s3a' etc. Having just set up a gdbe encrypted partition /dev/ads0s3e which I mount with gbde attach /dev/ad0s3e -l /etc/gbde/ad0s3e mount /dev/ad0s3e.bde /mydir/encrypt I wonder WHAT should I now dump when backing up: dump -a0f fileE /dev/ad0s3e OR dump -a0f fileE /dev/ad0s3e.bde ? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Flash Disk
With all my USB pens I invariably use: /sbin/mount_msdosfs /dev/da0s1 /mnt And it works. Vittorio Alle 06:09, venerdì 06 gennaio 2006, Teilhard Knight ha scritto: On 2006-01-05 15:28, Teilhard Knight [EMAIL PROTECTED] wrote: Can someone tell me, or point to me where I can find, how to mount a Flash Disk in release 6.0? I have Googled, but I simply cannot find the right way. An icon to mount and unmount on the desktop would be nice. Thanks. When I plug my USB JetFlash disk, the following appears in /var/log/messages (and the system console, but I mostly use X11 these days): umass0: USB Flash Disk, rev 2.00/2.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C) I get something similar too. The Device Node is created all right. When you plug the USB flash disk in, /dev/da0 (or another daX device) is automatically created. If the flash disk already has partitions (they usually come with a single FAT partition), you'll also see da0s1 or something similar: # ls -l /dev/da* crw-r- 1 root operator - 4, 44 Oct 16 17:38 /dev/da0 Yes, I also get something similar to this. If you see only da0, it's possible that the 'raw disk' is formatted using FAT, without a real BIOS-style partition, which means that you should be able to 'mount' it with something like: # /sbin/mount_msdosfs /dev/da0 /mnt I do not only see da0 above and this command results in: mount_msdosfs: /dev/da0: Invalid argument That's it. Copy files to and from the /mnt directory. When you are done, make sure you unmount the flash disk before removing it. If you don't, chances are your kernel will panic when it discovers the physical flash disk is gone. # umount /mnt Now, it's safe to pull the flash disk out. You told me how to mount my flash disk in case the command ls -l /dev/da0 results incomplete or I have the disk raw formatted. But what should I do if I get all similar to what you get? In other words, how do you mount your flash disk? Thanks for your feedback. Teilhard. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
pvm connection problems
At office I'm trying to solve a heavy statistical problem by means of parallel computation with R and pvm. The problem is with setting up the cluster of computers which - to begin with - is made of two pentium 4 with freebsd 5.4 (host uffbsd) and 6.0 (host NbBSD). They see each other. From NbBSD: # ping uffbsd PING uffbsd.grtn.prv (10.155.194.115): 56 data bytes 64 bytes from 10.155.194.115: icmp_seq=0 ttl=64 time=0.221 ms 64 bytes from 10.155.194.115: icmp_seq=1 ttl=64 time=0.193 ms But trying to setup the virtual machine pvm add NbBSD add NbBSD 0 successful HOST DTID NbBSD Duplicate host pvm conf conf 1 host, 1 data format HOST DTID ARCH SPEED DSIG NbBSD.myd.prv4 FREEBSD1000 0x00408841 pvm add uffbsd add uffbsd 0 successful HOST DTID uffbsd Can't start pvmd Auto- Diagnosing Failed Hosts... uffbsd... Verifying Local Path to rsh... Rsh found in /usr/bin/rsh - O.K. Testing Rsh/Rhosts Access to Host uffbsd... Rsh/Rhosts Access FAILED - uffbsd.myd.prv: Connection refused Make sure host uffbsd is up and connected to a network and check its DNS / IP address. Also verify that NbBSD.myd.prv is allowed rsh access on uffbsd Add this line to the $HOME/.rhosts on uffbsd: NbBSD.myd.prv victor ... Of course, in /home/victor/.rhost on uffbsd there's the required line. The same reciprocal situation happens from host uffbsd. Perhaps I'm missing something. Could you please help me? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R: pvm connection problems
Sorry, the correct ping is: # ping uffbsd PING uffbsd.myd.prv (10.155.194.115): 56 data bytes 64 bytes from 10.155.194.115: icmp_seq=0 ttl=64 time=0.221 ms 64 bytes from 10.155.194.115: icmp_seq=1 ttl=64 time=0.193 ms ... That is the domain is myd. prv Messaggio originale Da: [EMAIL PROTECTED] Data: 30-nov- 2005 9.07 AM A: freebsd-cluster@freebsd.org Cc: freebsd- [EMAIL PROTECTED] Ogg: pvm connection problems At office I'm trying to solve a heavy statistical problem by means of parallel computation with R and pvm. The problem is with setting up the cluster of computers which - to begin with - is made of two pentium 4 with freebsd 5.4 (host uffbsd) and 6.0 (host NbBSD). They see each other. From NbBSD: # ping uffbsd PING uffbsd.grtn.prv Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
rsh fails: [WAS] pvm connection problems
Context: 2 pentium 4 boxes; freebsd 5.4 6.0 I detected that remote login via rsh doesn't work in my boxes: e.g. # rsh uffbsd uffbsd.myd.prv: Connection refused even though I've defined the trusted hosts on each box both in $HOME/.rhosts and in /etc/hosts.equiv. I've also uncommented the shell lines in /etc/inetd.conf to no avail. What should I do to enable the (mistrusted) rsh connection? Vittorio Alle 08:07, mercoledì 30 novembre 2005, Vittorio ha scritto: At office I'm trying to solve a heavy statistical problem by means of parallel computation with R and pvm. The problem is with setting up the cluster of computers which - to begin with - is made of two pentium 4 with freebsd 5.4 (host uffbsd) and 6.0 (host NbBSD). They see each other. From NbBSD: # ping uffbsd PING uffbsd.myd.prv (10.155.194.115): 56 data bytes 64 bytes from 10.155.194.115: icmp_seq=0 ttl=64 time=0.221 ms 64 bytes from 10.155.194.115: icmp_seq=1 ttl=64 time=0.193 ms But trying to setup the virtual machine pvm add NbBSD add NbBSD 0 successful HOST DTID NbBSD Duplicate host pvm conf conf 1 host, 1 data format HOST DTID ARCH SPEED DSIG NbBSD.myd.prv4 FREEBSD1000 0x00408841 pvm add uffbsd add uffbsd 0 successful HOST DTID uffbsd Can't start pvmd Auto- Diagnosing Failed Hosts... uffbsd... Verifying Local Path to rsh... Rsh found in /usr/bin/rsh - O.K. Testing Rsh/Rhosts Access to Host uffbsd... Rsh/Rhosts Access FAILED - uffbsd.myd.prv: Connection refused Make sure host uffbsd is up and connected to a network and check its DNS / IP address. Also verify that NbBSD.myd.prv is allowed rsh access on uffbsd Add this line to the $HOME/.rhosts on uffbsd: NbBSD.myd.prv victor ... Of course, in /home/victor/.rhost on uffbsd there's the required line. The same reciprocal situation happens from host uffbsd. Perhaps I'm missing something. Could you please help me? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R: Re: rsh fails: [WAS] pvm connection problems
Messaggio originale Da: [EMAIL PROTECTED] Data: 30-nov-2005 2.15 PM A: freebsd-cluster@freebsd.org Cc: Vittorio De Martino [EMAIL PROTECTED], freebsd-questions@freebsd.org Ogg: Re: rsh fails: [WAS] pvm connection problems On Wednesday 30 November 2005 08:30 am, Vittorio De Martino wrote: Context: 2 pentium 4 boxes; freebsd 5.4 6.0 I detected that remote login via rsh doesn't work in my boxes: e.g. # rsh uffbsd uffbsd.myd.prv: Connection refused even though I've defined the trusted hosts on each box both in $HOME/.rhosts and in /etc/hosts.equiv. I've also uncommented the shell lines in /etc/inetd.conf to no avail. What should I do to enable the (mistrusted) rsh connection? Vittorio Do you have inetd enabled (inetd_enable=YES in /etc/rc.conf) and is it running? Actually no, but... From the standpoint of my first box, NbBSD (freebsd 6.0) I did the following steps 1) added inetd_enable=YES at the end of /etc/rc.conf 2) modified /etc/inetd. conf uncommenting the line shell stream tcp nowait root /usr/libexec/rshd rshd (I don't know if it helps, anyway!) 3) /etc/rc.d/inetd start 4) I've checked the presence of inetd via top. It existed!! 5) Under user victor there's a .rhosts file containing: uffbsd.myd.prv victor (user victor exists on the box uffbsd and uffbsd.myd.prv is also present in the box NbBSD in /etc/hosts: I can ping it!) 6) I reciprocate the same configuring steps on the other machine uffbsd. Well in the end: # rsh uffbsd uffbsd.myd.prv: Connection refused Please help Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: R: Re: rsh fails: [WAS] pvm connection problems
Alle 15:19, mercoledì 30 novembre 2005, Matthew D. Fuller ha scritto: On Wed, Nov 30, 2005 at 04:01:06PM +0100 I heard the voice of Vittorio, and lo! it spake thus: 6) I reciprocate the same configuring steps on the other machine uffbsd. Well in the end: # rsh uffbsd uffbsd.myd.prv: Connection refused rsh with no arguments uses rlogind, not the rshd. Thanks to the suggestions in this mailing-list, after enabling rlogind in inetd.conf and restarting the service now rsh works! $ rsh uffbsd Password: Last login: Wed Nov 30 16:02:31 on ttyp0 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE (SERVER3) #0: Mon Nov 7 18:07:20 CET 2005 Welcome in FreeBSD! uffbsd victor# exit rlogin: connection closed BUT.. pvm goes on complaining as at the very beginning of this thread that: victor$ pvm pvm add NbBSD add NbBSD 0 successful HOST DTID NbBSD Duplicate host pvm add uffbsd add uffbsd 0 successful HOST DTID uffbsd Can't start pvmd Auto-Diagnosing Failed Hosts... uffbsd... Verifying Local Path to rsh... Rsh found in /usr/bin/rsh - O.K. Testing Rsh/Rhosts Access to Host uffbsd... Rsh/Rhosts Access FAILED - rshd: Login incorrect. Make sure host uffbsd is up and connected to a network and check its DNS / IP address. Also verify that NbBSD.myd.prv is allowed rsh access on uffbsd Add this line to the $HOME/.rhosts on uffbsd: NbBSD.myd.prv victor ... . Now user victor on the uffbsd box had been defined via adduser as a normal user with password.Thinking the the problem was the password, I deleted it and recreated this user as passwordless but rsh fails asking for a password all the same and pvm fails with identical diagnostic. Please help again Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Accessing samba shares without password prompts
Use /etc/nsmb.conf. Here it is a simple procedure (it works flawlessly for me!) supposing that the windows user is called 'myuser', the password 'pass' and the windows share //winserver/data: As root and once and for all: 1) On your freebsd box create a user called 'myuser' with adduser etc..; 2) issue smbpasswd myuser, when prompted for the password type pass; 3) edit the /etc/nsmb.conf file adding these few lines: ### # First, define a workgroup. [default] workgroup=Myworkgroup [WINSERVER] addr=winserver.yourdomain # or IP address [WINSERVER:MYUSER] password=pass ## 4) restart samba '/usr/local/etc/rc.d/samba.sh restart' 5) issue,e.g.: mount_smbfs -I winserver //[EMAIL PROTECTED]/data /home/myuser/smb Ciao Vittorio Alle 01:36, martedì 22 novembre 2005, Robert Fitzpatrick ha scritto: Can someone point me to info on how to access shares on the netowrk without having to provide the password. I am logged in to my FreeBSD 6.0 workstation with the user name and password equal to that of a user on the other samba servers and Windows. -- Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: bacula: install problem
Sorry friends but ... It was a more general problem of my freebsd box. I had in some unknown way corrupted the /etc/master.passwd. It has been enough to use vipw once to put everything right. Now bacula is installed. Ciao sorry again Vittorio Alle 23:03, venerdì 18 novembre 2005, vittorio ha scritto: Context: pentium 4, Freebsd 6.0, latest ports with portsnap Compiling bacula from the ports /usr/ports/sysutils/bacula-server issuing a make install the installation stops with the following error I'm unable to find in the internet: ... .. if [ -f /usr/local/etc/rc.d/bacula.sh ]; then /bin/mv /usr/local/etc/rc.d/bacula.sh /usr/local/etc/rc.d/z-bacula.sh; fi if [ -f /usr/local/etc/rc.d/bacula.sh.sample ]; then /bin/mv /usr/local/etc/rc.d/bacula.sh.sample /usr/local/etc/rc.d/z-bacula.sh.sample; fi bacula:*:910: You already have a group bacula, so I will use it. pw: user 'bacula' already exists Adding user bacula failed... *** Error code 1 Stop in /usr/ports/sysutils/bacula-server. ... ... Please help Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
bacula: install problem
Context: pentium 4, Freebsd 6.0, latest ports with portsnap Compiling bacula from the ports /usr/ports/sysutils/bacula-server issuing a make install the installation stops with the following error I'm unable to find in the internet: . if [ -f /usr/local/etc/rc.d/bacula.sh ]; then /bin/mv /usr/local/etc/rc.d/bacula.sh /usr/local/etc/rc.d/z-bacula.sh; fi if [ -f /usr/local/etc/rc.d/bacula.sh.sample ]; then /bin/mv /usr/local/etc/rc.d/bacula.sh.sample /usr/local/etc/rc.d/z-bacula.sh.sample; fi bacula:*:910: You already have a group bacula, so I will use it. pw: user 'bacula' already exists Adding user bacula failed... *** Error code 1 Stop in /usr/ports/sysutils/bacula-server. .. Please help Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R: Re: [R] RODBC fails to build
Dear All, Thanks to the suggestion of Prof Ripley I progressively solved the many libraries problems connected to the installation of the R package RODBC under FreeBSD 5.4. *** As far as this OS is concerned *** please take notice that the sentence in the README file:. Use the configure options --with-odbc-include and --with-odbc-lib or environment variables ODBC_INCLUDE and ODBC_LIBS to set the include and library paths as needed doesn't give a complete piece of info. As a matter of fact, as well as setting $ODBC_INCLUDE=/usr/local/include and $ODBC_LIBS=/usr/local/lib I had also to put ** $LIBS=- L/usr/local/lib ** which wasn't in the README (and wasn't that intuitive, was it?). In so doing I solved the sql.h, sqlext.h headers problem and a successive problem with the SQLTables libraries. This set things straight and RODBC was compiled flawlessly. I think it would be worth your while adding this piece of information in the README file. Ciao Vittorio Messaggio originale Da: [EMAIL PROTECTED] Data: 8-nov-2005 11.45 PM A: r-help@stat.math.ethz.ch Ogg: Re: [R] RODBC fails to build yes, I read it. Nevertheless I can't make head or tail of it. Can anyone out there help me with a step by step explanation? Ciao Vittorio Alle 17:34, martedì 08 novembre 2005, Prof Brian Ripley ha scritto: Did you read the package's README? It contains two ways to set these paths. On Tue, 8 Nov 2005, Vittorio wrote: Context:Pentium 4, FreeBSD 5.4, R 2.2.0 I updated the extra packages I had downloaded but the upgrading of RODBC failed complaining: checking for unistd.h... yes checking sql.h usability... no checking sql.h presence... no checking for sql.h... no checking sqlext.h usability... no checking sqlext.h presence... no checking for sqlext.h... no configure: error: ODBC headers sql.h and sqlext.h not found ERROR: configuration failed for package 'RODBC' The two header files are present in my box under /usr/local/include; I tried to symlink them to /usr/include and to /usr/local/lib/R/include to no avail. Please help. Vittorio __ [EMAIL PROTECTED] ch mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide! http://www.R-project.org/posting-guide.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem installing ROracle package under R
Context: Pentium 4 with FreeBSD 5.4 and R 2.2.0 I'm trying to install the package ROracle under R. To start with I installed the oracle8- client from the ports and referred to it via the variable $HOME_ORACLE as /usr/local/oracle8-client. Then I started R. After issuing install. packages(ROracle) R downloaded the needed package and started to compile it but complained: ... downloaded 138Kb * Installing *source* package 'ROracle' ... creating cache . /config.cache checking how to run the C preprocessor... cc -E ROracle configuration warning: Oracle pre-compiler proc not in /usr/local/oracle8-client/bin/proc you may not be able to compile ROracle /tmp/oraLibs2442.mk, line 2: Could not find /usr/local/oracle8-client/precomp/lib/env_precomp.mk make: fatal errors encountered -- cannot continue updating cache ./config.cache creating . /config.status creating src/Makevars creating src/Makefile ** libs R CMD COMPILE RS-DBI.c cc -I/usr/local/lib/R/include - I/usr/local/include -D__NO_MATH_INLINES -fPIC -O -pipe - march=pentium4 -c RS-DBI.c -o RS-DBI.o proc CODE=ANSI_C MODE=ORACLE INCLUDE=/usr/local/lib/R/include PARSE=NONE LINES=false RS-Oracle.pc proc: not found *** Error code 127 Stop in /tmp/R.INSTALL. C0fZy6/ROracle/src. ERROR: compilation failed for package 'ROracle' ** Removing '/usr/local/lib/R/library/ROracle' The downloaded packages are in /tmp/RtmpRLVjrq/downloaded_packages Warning message: installation of package 'ROracle' had non-zero exit status in: install. packages(ROracle) ... So various directories and relating programs are missing! What else should I install to make ROracle work? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Compaq Evo 510 PC DMA
Some time ago I had posted a problem I was suffering trying to install freebsd 5.4 on a Compaq evo 510 PC. The boot immediatedly stopped with weird indications on the causes. Freesbie also failed. Surfing the net I understood that the problem with that specific PC was already known and no real solution was proposed. Today I came across http://www. czaplinski.net/FreeBSD/hpi386.html in which it was suggested that EVO 510 CPU: 2.8 GHz P4; 1024MB RAM; i810 Intel integrated NIC (recognized as EEPro100); i845 Intel integrated video...FreeBSD 5.1 loads, but only after DMA is disabled in BIOS. In fact, disabling the bios dma I was able to start both freesbie and the 5.4 installation CD! Not being a PC expert but knowing that dma is useful to significantly reduce the load of the CPU when I/O operations are in progress and my question is: Having disabled the bios dma, Is dma (re-)enabled all the same in some way by freebsd 5.4 when it boots OR will I have a crippled system at my disposal? Take into account that the pc will work as a postgresql server. Suggestions? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Editor for C C++ language
Alle 02:34, domenica 23 ottobre 2005, Giorgos Keramidas ha scritto: On 2005-10-22 22:07, vittorio [EMAIL PROTECTED] wrote: Working usually under kde I'm looking for something similar to the llc-win32 program under ms-windows - that is a development environment where you can edit your c++ program, compile it, debug it step by step, and finally run it in a suitable window. I tried the nice editor kate which allows to compile the file only. No debugging, no running. Is there anything of the kind of llc-win32? I'm using Emacs as my IDE for years now. It's not exactly what someone who is used to windowing environments would call a GUI IDE, but it can do the following: - Edit the source code (with syntax highlighting if need be) - Compile (with the hit of a single key, once configured) - Parse compiler output and move to the file/line of an error, then to the next error, etc. - Interactively debug C, C++, Perl, Python, or LISP programs, line by line -- working as a control program for GNU gdb and that's only a minor subset of the features it has. Well, as a matter of fact I'm obliged at wok to use windows but my pet OS are both BSDs. In my freebsd portable I have xemacs that is sensitive to many environments (I use it for the statiscal program R and for pdflatex) among which C++ . In fact the C++ program I edit triggers a C++ menu and many options among which there are also debug and compile. This latter unfortunately calls a make -k command while I'd like to run g++ prog.c -g -o prog as usual. Could someone explain what shoujld I do to modify xemacs as I want? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Editor for C C++ language
Working usually under kde I'm looking for something similar to the llc-win32 program under ms-windows - that is a development environment where you can edit your c++ program, compile it, debug it step by step, and finally run it in a suitable window. I tried the nice editor kate which allows to compile the file only. No debugging, no running. Is there anything of the kind of llc-win32? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Is dump different?
I have a new desktop with netbsd 2.0.2 and a portable with freebsd 5.4 (my pet OS but it didn't boot on the compaq evo 510 box; therefore netbsd!). Now, I had dumped my previous old desktop with freebsd 5.4 to a samba share and then tried to restore some files interactively with restore -i -f mydumfile ont the new box but restore (under netbsd) complained that there was no root directory and i couldn't restore anything (e.g. ls didn't show anything). My question is: the dump programs in netbsd in freebsd are different in some way, I mean structurally different therefore somewhat incompatible in the two OSs? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Weird incompatibility of compaq evo 510 PCs
Alle 14:22, mercoledì 12 ottobre 2005, Lowell Gilbert ha scritto: Vittorio [EMAIL PROTECTED] writes: At office I have an old compaq 450 (p3, 450MHz,128MB) working as a postgresql 8.03 server under freebsd 5.4. Now having the chance of substituting it with a newer Compaq Evo 510 (p4,2,8 GHz, 512MB) to be on the safe side I tested this new pc trying to run freesbie 1.1 on it from a CD. Unfortunately after showing the usual line with [EMAIL PROTECTED]'amico etc.. a cryptic message of fatal error popped up saying something like: int=000d err= efl=00030246 eip=3034 eax=205d ebx=0004 etc, etc. Furthermore, identical diagnostics popped up trying to boot FreeBSD from the primary hd of the old pc mounted on this new one. Thinking that there was something wrong with that specific box only I tried: a) to boot freesbie on other compaq evo 510 in my office but all of them failed to boot with the same (or similar??) diagnostics; b) the freesbie cd is ok having tested it on other boxes; b) using a cd for the installation of M$ windows on the evo 510 it all works like a charm and everything is installed. My questions are: 1) Is this a known incompatibility of the Compaq evo 510 PCs ( a search in the internet didn't shed any light on it!); 2) Is there any way to overcome the problem and how? Try to install FreeBSD 6.0 on one of these machines. It's more likely to work, and if it doesn't, it is likely to give more information about what is wrong. The information you gave definitely isn't enough to go on. I had a go at freebsd 6.0-beta5 on the same compaq evo 510 to no avail. Same results. A total failure with the same diagnostics. Nothing more . Whilst both netbsd and openbsd work flawlessly. I'll switch to one of them. Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Weird incompatibility of compaq evo 510 PCs
At office I have an old compaq 450 (p3, 450MHz,128MB) working as a postgresql 8.03 server under freebsd 5.4. Now having the chance of substituting it with a newer Compaq Evo 510 (p4,2,8 GHz, 512MB) to be on the safe side I tested this new pc trying to run freesbie 1.1 on it from a CD. Unfortunately after showing the usual line with [EMAIL PROTECTED]'amico etc.. a cryptic message of fatal error popped up saying something like: int=000d err= efl=00030246 eip=3034 eax=205d ebx=0004 etc, etc. Furthermore, identical diagnostics popped up trying to boot FreeBSD from the primary hd of the old pc mounted on this new one. Thinking that there was something wrong with that specific box only I tried: a) to boot freesbie on other compaq evo 510 in my office but all of them failed to boot with the same (or similar??) diagnostics; b) the freesbie cd is ok having tested it on other boxes; b) using a cd for the installation of M$ windows on the evo 510 it all works like a charm and everything is installed. My questions are: 1) Is this a known incompatibility of the Compaq evo 510 PCs ( a search in the internet didn't shed any light on it!); 2) Is there any way to overcome the problem and how? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sftp connection problems
I've just sent a PR suggesting a fix to http://www.freebsd. org/cgi/query-pr.cgi?pr=86759 The problem is: Trying to connect with a client to an sshd server using sftpd the client fails connection invariably complaining: sftp-server: Command not found. Fatal: unable to initialise SFTP: could not connect Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
R: sftp connection problems
By the way, isn't it possible for the mantainers of sshd to fix /etc/ssh/sshd_config once and for all? I think that the correction is straightforward and doesn't impact with anything else. Again Ciao Vittorio Messaggio originale Da: [EMAIL PROTECTED] Data: 30-set-2005 5.11 PM A: freebsd-questions@freebsd.org Ogg: sftp connection problems I've just sent a PR suggesting a fix to http: //www.freebsd.org/cgi/query-pr.cgi?pr=86759 The problem is: Trying to connect with a client to an sshd server using sftpd the client fails connection invariably complaining: sftp-server: Command not found. Fatal: unable to initialise SFTP: could not connect Ciao Vittorio ___ freebsd- [EMAIL PROTECTED] mailing list http://lists.freebsd. org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Webcams and FreeBSD
Alle 12:05, domenica 25 settembre 2005, Ned Harrison ha scritto: I'm running FreeBSD 5.4 as a desktop operating system on my home computer. I would like to set up a webcam for physical security/nature observation while I'm away from the residence. Something simple, I just want to take periodic images and store them on an external hard drive. In the past couple of days researching this, I get the impression that it may be possible to do this but I have not found specific instructions on how to set it up. Even though I am a newbie, I have been able to get things working when I can find the right documentation. Does anybody know of an article which describes setting something like this up? Thanks Ned Even though it seems to me a poor solution, here it is the best answer to a thread of mine on a similar subject: http://www.freebsd.org/cgi/getmsg.cgi?fetch=74724+0+/usr/local/www/db/text/2005/freebsd-questions/20050911.freebsd-questions Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Java plugin konqueror: too many choices...
Well, I'm somewhat disorientated by the number of programs available under /usr/ports/java. What I simpy want is a java plugin for konqueror to be loaded when I surf the net with this browser (of course, I enabled the java support under the browser). The simpler, the better! What do you recommend for konqueror? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Updating freebsd without cvsup
Alle 18:27, venerdì 16 settembre 2005, Ashley Moran ha scritto: Vittorio wrote: Thanks. I've just compiled the portsnap sources and put the following in /usr/local/etc/portsnap.conf: # Defaults: WORKDIR=/usr/local/portsnap PORTSDIR=/usr/ports KEYPRINT=9b5feee6d69f170e3dd0a2c8e469ddbd64f13f978f2f3aede40c98633216c330 URL=http://portsnap.daemonology.net BUT # portsnap fetch Fetching public key... failed. What's wrong with the original key in the portsnap.conf.sample file? Thanks again Vittorio The key is fine. Perhaps you need to run portsnap as # HTTP_PROXY=your proxy portsnap fetch to get round your proxy Well, after thourough examination and a word with the network administrator I learnt that my FreeBSD 5.4 client cannot resolve the name (and the IP too) of portsnap.daemonology.net because it is behind a firewall and a proxy (which -by the way - I had already defined via both $HTTP_PROXY and $http_proxy; as I stated in so doing make install under a port works flawlessly downloading whatever is needed!). According to the admin (windows 2000 network) portsnap is not able to use the name resolution of the proxy as other programs like browsers can and relies on the nameservers in /etc/resolv.conf only. Any idea for this poor newbie? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
portsdb portsnap
I'm having a go at using portsnap on my fbsd 5.4 notebook instead of cvsup to update the ports. With the latter under the /usr/ports dir I issue make update and portsdb -uU and finally portupgrade -arR. Now, using portsnap it seems to me that after update the program itself refreshes the db. In fact if I issue portversion -l a list of upgradable packages pops up. Therefore I'm concluding that after portsnap fetch, update, there's no need for a portsdb -uU. Am I right or missing something (which is actually my feeling!)? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Updating freebsd without cvsup
At office I have a freebsd 5.4 server to run postgresql. I'd like to update the ports in it from time to time but cvsup doesn't seem to work behind our proxy. In fact, in make.conf I have the following two lines: FETCH_ENV = HTTP_PROXY=http://user:[EMAIL PROTECTED]:8080 FETCH_ENV = FTP_PROXY=http://user:[EMAIL PROTECTED]:8080 which work smoothly when I compile a port via make install clean downloading the needed sources BUT they seem to be useless when cvsup is used. No way of reaching the cvsup server because unknown (is the same I use succesfully at home with an adsl connection!)! Is there another alternative way of defining the proxy OR any other way of getting a new source three to be copied to the server, e.g., by means of a cd burnt at home? Thanks Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Re: Updating freebsd without cvsup
Thanks. I've just compiled the portsnap sources and put the following in /usr/local/etc/portsnap.conf: # Defaults: WORKDIR=/usr/local/portsnap PORTSDIR=/usr/ports KEYPRINT=9b5feee6d69f170e3dd0a2c8e469ddbd64f13f978f2f3aede40c98633216c330 URL=http://portsnap.daemonology.net BUT # portsnap fetch Fetching public key... failed. What's wrong with the original key in the portsnap.conf.sample file? Thanks again Vittorio Messaggio originale Da: [EMAIL PROTECTED] Data: 16-set-2005 5.14 PM A: Vittorio[EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Ogg: Re: Updating freebsd without cvsup Vittorio wrote: Is there another alternative way of defining the proxy OR any other way of getting a new source three to be copied to the server, e.g., by means of a cd burnt at home? Have you considered using the sysutils/portsnap port? It's what I use to keep my servers up-to- date. It works over HTTP so it might be easier to work around your proxy. http://www.daemonology.net/portsnap/ Ashley ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Updating freebsd without cvsup
Alle 18:21, venerdì 16 settembre 2005, Colin Percival ha scritto: Vittorio wrote: # Defaults: WORKDIR=/usr/local/portsnap PORTSDIR=/usr/ports KEYPRINT=9b5feee6d69f170e3dd0a2c8e469ddbd64f13f978f2f3aede40c98633216c330 URL=http://portsnap.daemonology.net # portsnap fetch Fetching public key... failed. What's wrong with the original key in the portsnap.conf.sample file? That key is correct. Try running portsnap --debug fetch to work out what the problem is. Colin Percival Here it is : vicbsd# portsnap --debug fetch Fetching public key... fetch: http://portsnap.daemonology.net/pub.ssl: No address record failed. What's wrong with it? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Fwd: Re: C program to write to the com port - RESOLVED
As a C++ absolute beginner I'm trying to compile your testssc.c file with
g++ testssc.c -o testssc
(under freebsd 5.4, gcc version 3.4.2)
But...
I only get:
SerialPort.C: In function `int main(int, char*)':
SerialPort.C:62: error: invalid conversion from `unsigned char*' to `char*'
SerialPort.C:62: error: initializing argument 1 of `int snprintf(char*,
size_t, const char*, ...)'
SerialPort.C:66: error: `err' undeclared (first use this function)
SerialPort.C:66: error: (Each undeclared identifier is reported only once for
each function it appears in.)
SerialPort.C:69:3: warning: no newline at end of file
Could you please help to straighten things up?
Vittorio
-- Messaggio inoltrato --
Subject: Re: C program to write to the com port - RESOLVED
Date: 02:23, venerdì 09 settembre 2005
From: Paul Hamilton [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
.
/* Name: testssc.c
* compile with: gcc testssc.c -o testssc
*
* Your serial cable should be plugged into com port 1.
* You only need the pin 3 and pin 5 (DB9) plugged into the controller.
* The servo should be plugged into the first servo channel/port.
* This test program when run will move the servo from midrange,
* to position 01. This is for demonstrational use only.
* Tested with FreeBSD 5.4
* Paul Hamilton 8th Aug 2005
*/
#include sys/time.h
#include sys/ioctl.h
#include errno.h
#include fcntl.h
#include termios.h /*Originally it was termio.h*/
#include stdio.h
#include unistd.h
// Use serial port 0 (com port 1)
static char *opt_comport=/dev/cuaa0;
int main(int argc, char **argv)
{
int fd;
struct termios options;
unsigned char buf[4];
// ok, lets try opening the com port
printf(Opening Com port: %s\n\n, opt_comport);
if((fd = open(opt_comport, O_RDWR | O_NOCTTY )) 0)
{
printf(Problems opening %s\n, opt_comport);
return (-1);
}
// set the required com port parrameters
options.c_cflag = ~CSIZE; /* Mask the character size bits */
options.c_cflag |= CS8; /* Select 8 data bits */
options.c_cflag = ~PARENB; // set no parity
options.c_cflag = ~CSTOPB; // set 1 stop bit
options.c_oflag = ~OPOST; // Raw output
tcgetattr(fd, options);
/*
* Set the baud rates to 9600...
*/
cfsetispeed(options, B9600);
cfsetospeed(options, B9600);
/*
* Enable the receiver and set local mode...
*/
options.c_cflag |= (CLOCAL | CREAD);
/*
* Set the new options for the port...
*/
tcsetattr(fd, TCSANOW, options);
// ok, lets transmit our 3 bytes through com port 1
snprintf(buf,4,%c%c%c%c,0xff,0x00,0x01,0);
printf(buf=%x,%x,%x,%x\n, buf[0],buf[1],buf[2],buf[3]);
if (write(fd, buf, 3) != 3)
err(1, write);
close(fd);
};
Cheers,
Paul Hamilton
PS. I have three books on programming in C winging their way to Australia.
I have a lot to learn :-)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
---
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: video surveillance with freebsd
Alle 01:06, domenica 04 settembre 2005, nbco ha scritto: On Friday 03 June 2005 23:56, vittorio wrote: The aim: with up to 4 small cameras connected to a pci board in a freebsd 5.4 box, scattered suitably around to guard, surveille a seaside resort flat *** remotely ***. The open-source software I'm looking for should: 1) manage the pci board the cameras; 2) start,trigger a script for, e.g., a gsm connection to transmit images to a remote server via ppp OR start an alarm *** whener a motion is detected ***. Is there any software in the ports satisfying these requirements? Ciao Vittorio Hhmmm I used to have a landlord like that... .nbco Amusing but that isn't actually my purpose! Actually I was speaking of using some anti-burglar device for our little family house house at the seaside resort placing in the garden cameras sensitive to people moving in it when my family and I are absent, that is 10.5 months per year. Asking around for (anti-burglar) alarm systems they asked me a mere fortune. Having a spare old pentium and a much older would like to use it for the same purpose but a very cheap price. That's all! Any idea? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
video surveillance with freebsd
The aim: with up to 4 small cameras connected to a pci board in a freebsd 5.4 box, scattered suitably around to guard, surveille a seaside resort flat *** remotely ***. The open-source software I'm looking for should: 1) manage the pci board the cameras; 2) start,trigger a script for, e.g., a gsm connection to transmit images to a remote server via ppp OR start an alarm *** whener a motion is detected ***. Is there any software in the ports satisfying these requirements? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems withpcmcia smartmedia
When I insert my pccard (smartmedia adapter pcmcia - hama) freebsd 5.4 doesn't seem to recognize it as a storage device. In fact /var/log/messages says: .. Aug 18 19:33:03 vittorio kernel: pccard0: Allocation failed for cfe 0 Aug 18 19:33:03 vittorio kernel: ata2: at port 0x2050-0x205f irq 11 function 0 config 1 on pccard0 .. The same smartmedia inside the Olympus camera and connected via usb is instead happily seen as a scsi device. What should I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot connect to Internet...http proxy?
Alle 05:44, giovedì 11 agosto 2005, perikillo ha scritto: On 02 Aug 2005 09:35:31 -0400, Lowell Gilbert [EMAIL PROTECTED] wrote: perikillo [EMAIL PROTECTED] writes: In my work, we connect to the internet over one http proxy (squid) running on fedora, with windows(98/2k/xp) we dont have any problem to acces to the outside. I have my user and password, the proxy have the IP: 192.168.1.2 Port 3128 I need to access to the internet to update my system because i only download the mini-iso, and i need to update ports and kernel, i need to install some packages, but went the /stand/sysinstall ask me how i want to connect to the internet i chose HTTP Proxy, them he ask: Please enter the address of the http proxy in this format: hostname: port (the ':port' is optional, default is 3128 ) I give the IP of my proxy: 192.168.1.2, but he dont ask my user and password, and say: No Such directory: ftp://ftp4.freebsd.org/pub/FreeBSD /snapshots/i386/5.3-RELEASE please check URL and try again We use one DHCP server with windows that give the IP, i receive the IP, but still cannot connect my freebsd box to the internet, some docs say that if we receive our IP address from some DHCP we dont need to worry about the DNS. I dont have nothing on /etc/resolv.conf Our subnet is W.X.2.Z -- my IP is 192.168.2.22 I forget something?, i need to ask something more to the person is in charge of the Internet access? I really need to setup freebsd, because we need to test some software before next friday. Hope you could help me, thanks. Set the HTTP_PROXY environment variable. See man 3 fetch. Ok, i still have problems connecting my freebsd 5.3 to the outside, i read man 3 fetch and have this examples: man 3 fetch EXAMPLES To access a proxy server on proxy.example.com port 8080, set the HTTP_PROXY environment variable in a manner similar to this: HTTP_PROXY=http://proxy.example.com:8080 If the proxy server requires authentication, there are two options avail- able for passing the authentication data. The first method is by using the proxy URL: HTTP_PROXY=http://user:pwd@proxy.example.com:8080 The second method is by using the HTTP_PROXY_AUTH environment variable: HTTP_PROXY=http://proxy.example.com:8080 HTTP_PROXY_AUTH=basic:*:user:pwd *** end man 3 fetch* Them i add this to my /root/.cshrc setenv HTTP_PROXY http://myusername:[EMAIL PROTECTED]:3128 setenv http_proxy http://myusername:[EMAIL PROTECTED]:3128 Where 192.168.1.2 is my internal proxy(squid), that let goes out side, that proxy is begin the firewall, all running on fedora on the same box, is my setup correct or i didnt understand well? I dont get it, it looks very easy, any tip there? Put FETCH_ENV= HTTP_PROXY=http://user:pwd@proxy.example.com:8080 FETCH_ENV= FTP_PROXY=http://user:pwd@proxy.example.com:8080 in file /etc/make.conf It works for me!! Ciao from Rome Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Encrypted filesystem cgd
I've been reading with interest in Dru Lavigne's BSD Hacks of an encrypted filesystem named cgd which at the time of her writing was included in NetBSD only. has cgd been ported in FreeBSD (doesn't seem to me)? OR Is there anything similar in FreeBSD? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problems with booting MBR
Alle 11:16, giovedì 28 luglio 2005, [EMAIL PROTECTED] ha scritto: In the first disk ad0 (master) of a computer at office I had installed linux to be used as a postgresql server. Later I installed FreeBSD 5.4 (just to have a go at it) on a partition of the second disk ad1 (slave) to be a postgrresql server too. Linux lilo was the boot loader, booting linux by default and freebsd. Now, convinced of the high quality of the latter I eliminated linux from the first disk unfortunately without modifying lilo, and reshuffled the FreeBSD filesystem as in my latest /etc/fstab using also the first disk: # DeviceMountpoint FStype Options Dump Pass# /dev/ad1s2b noneswapsw 0 0 /dev/ad1s2a / ufs rw 1 1 /dev/ad0s1a /usr/local ufs rw 0 0 /dev/ad0s1d /varufs rw 0 0 /dev/ad0s1e /tmpufs rw 0 0 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 Now, even though I read the booting procedure in the handbook and somewhere else in the internet, issuing the various fdisk -b B, disklabel -b .., boot0cfg .., I was completely unable to modify the MBR and make this FreeBSD only computer boot directly into this OS. What should I do with the configuration I have? A straightforward and step by step explanation is highly appreciated. P.S. Is it possible that some problems can arise by the fact that I used an a slice (ad0s1a)for mounting /usr/local and freebsd starts from ad1s1a? Friends, as suggested in the docs in the internet I tried both with # fdisk -B -b /boot/boot0 ad0 fdisk: cannot open disk /dev/ad0: No such file or directory and with # fdisk -B -b /boot/boot0 ad1 fdisk: cannot open disk /dev/ad1: No such file or directory WHILST my working /etc/fstab is, as I mentioned before: # DeviceMountpoint FStype Options DumpPass# /dev/ad1s2b noneswapsw 0 0 /dev/ad1s2a / ufs rw 1 1 /dev/ad0s1a /usr/local ufs rw 0 0 /dev/ad0s1d /varufs rw 0 0 /dev/ad0s1e /tmpufs rw 0 0 Why FreeBSD 5.4 cannot find /dev/ad0 and ad1? What should I do? A baffled and frustated Vittorio again ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: usb mass storage failure
Alle 18:11, mercoledì 20 luglio 2005, Dan Nelson ha scritto: In the last episode (Jul 20), [EMAIL PROTECTED] said: Context: freebsd 5.4 My brand-new usb mp3 reader, even though is seen as a flash disk by the OS, cannot be used because: umass0: vendor 0x10d6 USB 2.0(FS) FLASH DISK, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: USB2.0 (FS) FLASH DISK 1.00 Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 497MB (1019617 512 byte sectors: 64H 32S/T 497C) umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED Try the patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=81846 Dan, thank you very much for your valuable suggestion BUT being a real novice with freebsd (I have experience of linux) could you please explain straightforwardly HOW and WHERE I should apply the patch? Thanks again Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Whom to report a panic to?
My (daughter's) new mp3 usb device made my laptop with the latest freebsd 5.4 freeze and show a page of panic explaining (not to me) what went wrong. The same mp3 reader is smoothly seen as a usb mass memory from linux on the same laptop. My question is: 1)Whom should I report the freebsd panic to? To what list? 2)What should I report? 3) is there a way to record in a file the console panic report? Ciao Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
acpi randomly hangs my portable
On my laptop with the latest freebsd 5.4 when I work under a csh console acpi , from time to time, without any plausible reason, stops the system and freezes it as if it were idle for a long time while it wasn't actually. How can I deactivate this acpi option? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make builworld fails owing to libstdc++ problems
I tried but the same error stil pops up. What else should I do? Vittorio Alle 07:26, lunedì 27 giugno 2005, Vasil Dimov ha scritto: On Sun, Jun 26, 2005 at 09:33:19PM +0200, Vittorio De Martino wrote: uname -a FreeBSD fbsd.grtn 5.4-RELEASE-p2 FreeBSD 5.4-RELEASE-p2 #0: Sat Jun 25 17:40:47 CEST 2005 I have the following in in make.conf CPUTYPE=p4 CFLAGS= -O2 -pipe -funroll-loops COPTFLAGS= -O2 -pipe -funroll-loops in stable-supfile: *default release=cvs tag=RELENG_5_4 in ports-supfile: default release=cvs tag=. I've just run (I've been using 5.4 since the very beginning and updated it every month roughly) # 1. �`cd /usr/src' � � � (or to the directory containing your source tree). # 2. �`make update' # 3. �`make buildworld' BUT.. x_handler.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/guard.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_handl er.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_op.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opnt. cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opv.c c /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opvnt .cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/pure.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/tinfo.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/tinfo2.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vec.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vterminat e.cc In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_alloc. cc:37: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_aux_ru ntime.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_catch. cc:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_except ion.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_global s.cc:33: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_person ality.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_person ality.cc:38:23: unwind-pe.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_term_h andler.cc:30: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_termin ate.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_throw. cc:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_type.c c:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_unex_h andler.cc:30: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/pure.cc:3 1: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vec.cc:37 : /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cx x.h:41:20: unwind.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/gnu/lib/libstdc++. *** Error code 1 Stop in /usr/src/gnu/lib
make builworld fails owing to libstdc++ problems
uname -a FreeBSD fbsd.grtn 5.4-RELEASE-p2 FreeBSD 5.4-RELEASE-p2 #0: Sat Jun 25 17:40:47 CEST 2005 I have the following in in make.conf CPUTYPE=p4 CFLAGS= -O2 -pipe -funroll-loops COPTFLAGS= -O2 -pipe -funroll-loops in stable-supfile: *default release=cvs tag=RELENG_5_4 in ports-supfile: default release=cvs tag=. I've just run (I've been using 5.4 since the very beginning and updated it every month roughly) # 1. `cd /usr/src' (or to the directory containing your source tree). # 2. `make update' # 3. `make buildworld' BUT.. x_handler.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/guard.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_handler.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_op.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opnt.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opv.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/new_opvnt.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/pure.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/tinfo.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/tinfo2.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vec.cc /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vterminate.cc In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_alloc.cc:37: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_aux_runtime.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_catch.cc:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_exception.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_globals.cc:33: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_personality.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_personality.cc:38:23: unwind-pe.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_term_handler.cc:30: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_terminate.cc:34: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_throw.cc:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_type.cc:32: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/eh_unex_handler.cc:30: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/pure.cc:31: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory In file included from /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/vec.cc:37: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/gnu/lib/libstdc++. *** Error code 1 Stop in /usr/src/gnu/lib. *** Error code 1 What should I do? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with libcom_err_p.a
Having the following in in stable-supfile: *default release=cvs tag=RELENG_5_4 in ports-supfile: default release=cvs tag=. I've just run (I've been using 5.4 since the very beginning and updated it every month roughly) # 1. `cd /usr/src' (or to the directory containing your source tree). # 2. `make update' # 3. `make buildworld' # 4. `make buildkernel KERNCONF=LAPTOP5 # My own configuration working unchanged since 5.3 # 5. `make installkernel KERNCONF=LAPTOP5 # 6. `reboot'(in single user mode: boot -s from the loader prompt). # 7. `mergemaster -p' # 8. `make installworld' Now while executing the command 8 it all stops complaining : . install -C -o root -g wheel -m 444 /usr/src/include/rpc/auth.h /usr/src/include/rpc/auth_unix.h /usr/src/include/rpc/clnt.h /usr/src/include/rpc/clnt_soc.h /usr/src/include/rpc/clnt_stat.h /usr/src/include/rpc/nettype.h /usr/src/include/rpc/pmap_clnt.h /usr/src/include/rpc/pmap_prot.h /usr/src/include/rpc/pmap_rmt.h /usr/src/include/rpc/raw.h /usr/src/include/rpc/rpc.h /usr/src/include/rpc/rpc_msg.h /usr/src/include/rpc/rpcb_clnt.h /usr/src/include/rpc/rpcent.h /usr/src/include/rpc/rpc_com.h /usr/src/include/rpc/svc.h /usr/src/include/rpc/svc_auth.h /usr/src/include/rpc/svc_soc.h /usr/src/include/rpc/svc_dg.h /usr/src/include/rpc/types.h /usr/src/include/rpc/xdr.h /usr/src/include/rpc/auth_des.h /usr/src/include/rpc/des.h /usr/src/include/rpc/des_crypt.h /usr/src/include/rpc/auth_kerb.h /usr/src/include/rpc/rpcb_prot.x rpcb_prot.h /usr/include/rpc === lib === lib/csu/i386-elf install -o root -g wheel -m 444 crt1.o crti.o crtn.o gcrt1.o /usr/lib === lib/libcom_err install -C -o root -g wheel -m 444 libcom_err.a /usr/lib install -C -o root -g wheel -m 444 libcom_err_p.a /usr/lib install: libcom_err_p.a: No such file or directory *** Error code 71 Stop in /usr/src/lib/libcom_err. *** Error code 1 Stop in /usr/src/lib. *** Error code 1 ... A research in the internet has been of no avail. What should I do? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Oracle odbc
I need to connect my freebsd 5.4 box to an oracle 9 db to query it by means of perl or the statistical software R. How could I set up this odbc connection (I already installed unixODBC, but what next and how to set it up)? Have you any doc to suggest ( I was unable to find anything interesting googling!)? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
