PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Thanks Ted,
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing and its detected the card fine. I've appied an IP address,
cvsup/install a few ports
[EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Wednesday, July 05, 2006 11:26 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Thanks Ted,
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing
04, 2006 2:47 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ted,
Apoligises for being difficult, I must be suffering from my super
early mornings and information overload.
Thank you for explaining it, my dealer has picked up on the fact that
I'll require the PT instead of MT card that I
to /usr/src/sys/dev/em/ and recompile
the kernel.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Tuesday, July 04, 2006 2:47 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
On 6/07/2006 4:26 PM, William wrote:
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing and its detected the card fine. I've appied an IP address,
cvsup/install a few ports without any issues..
dmesg
, July 03, 2006 10:56 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William
PROTECTED];
freebsd-questions@freebsd.org
Sent: Monday, July 03, 2006 11:05 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ok, I think its best I just order a Intel MT card with the low profile
PCI-X adapter instead of flapping about with these riser cards and
then just use 6-stable. All
.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Monday, July 03, 2006 11:05 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ok, I think its best I just order a Intel MT
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
Antony,
I've got an Intel card in production already on a homebrew
@freebsd.org; Ted Mittelstaedt
[EMAIL PROTECTED]
Sent: Monday, July 03, 2006 10:56 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
Antony,
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
- Original Message -
From: Antony Mawer [EMAIL PROTECTED]
To: William [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED]; Ted Mittelstaedt
[EMAIL PROTECTED]; freebsd-questions@freebsd.org
Sent: Thursday, June 29, 2006 11:07 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
On 30/06
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Will i get the updated driver by just cvsup'ing to stable once I
install -STABLE from CD?
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box
How will you cvsup without a network connection?
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Antony Mawer [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Friday, June 30, 2006 12:51 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Will i get the updated
, 2006 1:45 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Bloody good point.
On 01/07/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
How will you cvsup without a network connection?
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Antony Mawer [EMAIL PROTECTED
Thanks for the email Antony, I'm awaiting delivery of the server so I
might have to order an intel card sharpish. What can I do the
server+fbsd 6.x to prove the lock up?
Regards,
Will
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 23/06/2006 6:24 PM, Ted Mittelstaedt wrote:
Out of the
On 30/06/2006 3:53 PM, William wrote:
Thanks for the email Antony, I'm awaiting delivery of the server so I
might have to order an intel card sharpish. What can I do the
server+fbsd 6.x to prove the lock up?
Regards,
Will
Configure the network card (bge0) and then do something to pass traffic
Antony,
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 30/06/2006 3:53 PM, William wrote:
Thanks for the
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
The adapter you mentioned is a PCI-X adapter, which won't work unless
you
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
Antony,
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
That is a PRO/1000 MT card, which is a PCI-X
Will i get the updated driver by just cvsup'ing to stable once I
install -STABLE from CD?
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is
On 23/06/2006 6:24 PM, Ted Mittelstaedt wrote:
Out of the box the DL 320 G4 ships with a riser card that has 2 pci express
slots. At least that is what they are supposed to be, we haven't tried
them.
...
If you only do the pci express then the adapter you want is the Intel
Pro 1000 PT either
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hello again,
Sorry to dig this up again. I'm in the position to order the server
now and the DL320 is within our price range. Is everyone still having
an enjoyable experience running FreeBSD on the DL3XX G4 range?
Regards,
William
On 05/05/06
.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Wednesday, June 21, 2006 1:16 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hello again,
Sorry to dig this up again. I'm in the position
PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Friday, June 23, 2006 1:08 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Wow thats a total pain in the arse, I'll put it through some stress
testing before it gets shipped.
Can you reccomend a card
, for some reason the first nic locks the system up when you try to
bring it up.
Ted
-Original Message-
From: William [mailto:[EMAIL PROTECTED]
Sent: Friday, May 05, 2006 2:39 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hi Ted
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Wednesday, May 03, 2006 1:41 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small
Yes, for some reason the first nic locks the system up when you try to
bring it up.
Ted
-Original Message-
From: William [mailto:[EMAIL PROTECTED]
Sent: Friday, May 05, 2006 2:39 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
You may get lucky and get a DL320 G4 that does not have the
specific Broadcom chip in it.
not sure, but maybe you can specify at least the chipset you
DON'T want in your order (hp should be able to figure it out
using the serial#, and this no. is on the boxes.
the order way would be: check
chipsets, and
this isn't in the FreeBSD driver.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Thursday, May 04, 2006 2:55 AM
To: 'William'
Cc: freebsd-questions@freebsd.org
Subject: RE: FreeBSD 6.0 compat with DL320
: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small! :(
On 03/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
I have a DL320 G4 in the rack and the thing panics under 6.1-RC1
when more than a few K
PROTECTED] Behalf Of William
Sent: Tuesday, May 02, 2006 3:10 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware
I have a DL320 G4 in the rack and the thing panics under 6.1-RC1
when more than a few K of data is sent over the bge interface. I
haven't tried 6.0-RELEASE on it. Just make sure you can return it
if it doesen't work.
did you ever try to install win2k/2k3 on it and apply all fw-patches
from
on it. Just make sure you can return it
if it doesen't work.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Tuesday, May 02, 2006 3:10 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
What was your
PROTECTED]@mgEDV.net
Sent: Tuesday, May 02, 2006 7:25 AM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0 compat with DL320 G4
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some
Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Tuesday, May 02, 2006 7:25 AM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0 compat with DL320 G4
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
giving the same error message.
Read the PR's cited, it's all there.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Wednesday, May 03, 2006 1:47 AM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Wednesday, May 03, 2006 1:41 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small! :(
On 03/05/06, Ted
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware for once :)
On 30/04/06, [EMAIL PROTECTED]@mgEDV.net [EMAIL PROTECTED] wrote:
just for info: our dl320 g4 also has bge interfaces, and
they
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware for once :)
we didn't really run 6.0-RELEASE on the system, as the 6.1-BETAs had
been out when we bought the server. therefore not really man
Sent: Sunday, April 30, 2006 7:58 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 6.0 compat with DL320 G4
just for info: our dl320 g4 also has bge interfaces, and
they work very well under 6.1-RC1 (even BETA4 was ok).
but our server has been bought 2 months ago
just for info: our dl320 g4 also has bge interfaces, and
they work very well under 6.1-RC1 (even BETA4 was ok).
but our server has been bought 2 months ago, maybe there's
a newer/different chipset in it.
we also have a dl320 g2 being heavily used as lan switches
monitor, this server also has bge
:[EMAIL PROTECTED] Behalf Of William
Sent: Friday, April 28, 2006 12:05 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Will this stop me using the drives without RAID?
Regards,
William
On 28/04/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
RAID support
this is the case.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Saturday, April 29, 2006 4:27 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ted,
Is that the same with FreeBSD 6.0-RELEASE?
Cheers
:27 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ted,
Is that the same with FreeBSD 6.0-RELEASE?
Cheers,
Will
On 28/04/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
No, but you must make sure to turn OFF raid in the BIOS
settings or FreeBSD 6.1
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hi Ted,
Thanks for the information regarding the Ethernet chipset, does the
same thing happen if you configure the interface via rc.conf/ifconfig
once the system is up and running
RAID support on the DL320 G4 is broken. HP uses Adaptec
firmware and Adaptec has not provided Soren programming info
on their metadata format, as he requested.
hi,
we're using 6.1-RC1 on a DL320 G4 with raidctl, which perfectly
fit's our needs. the metadata being written by the bios-fw of
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Thursday, April 27, 2006 5:38 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 6.0 compat with DL320 G4
Our vendor preference is HP
@freebsd.org
Cc: [EMAIL PROTECTED]; 'Ted Mittelstaedt'
Subject: RE: FreeBSD 6.0 compat with DL320 G4
RAID support on the DL320 G4 is broken. HP uses Adaptec
firmware and Adaptec has not provided Soren programming info
on their metadata format, as he requested.
hi,
we're using 6.1-RC1
format, as he requested.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Thursday, April 27, 2006 5:38 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 6.0 compat with DL320 G4
Our vendor preference is HP, if anyone could share their experience
with the following products (in regards of network/sata support and
anything else mentioning):
HP DL140 G2
HP DL145 G2
HP DL320 G4
HP DL360 G4
we tried dl320 g2, g3, g4, dl380 g3 with sata/ciss drives,
1-4gb ram,
Thanks for your email,
I'm really happy to hear about the support, I'm looking at using the
sata disks! I'm not sure else to ask you have covered pretty much
everything.
Regards,
William
On 27/04/06, [EMAIL PROTECTED]@mgEDV.net [EMAIL PROTECTED] wrote:
Our vendor preference is HP, if anyone
, April 27, 2006 5:38 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 6.0 compat with DL320 G4
Our vendor preference is HP, if anyone could share their experience
with the following products (in regards of network/sata support and
anything else mentioning):
HP
53 matches
Mail list logo