s m gmail.com> writes:
> ...
> subnet 192.0.0.0 netmask 255.0.0.0 {
> range 192.0.0.1 192.255.255.255;
The 'range' denotes IP addresses that can be allocated to clients.
The IP 192.255.255.255 is a reserved broadcast address for the network.
jb
_
hello all,
i have a question about dhcpd in freebsd8.2 . when i define my network like
below in dhcpd.conf file, server doesn't run correctly and return core
dump
this is my dhcpd.conf file:
ddns-update-style none;
log-facility local7;
subnet 192.0.0.0 netmask 255.0.0.0 {
range 192.0.0.1 1
On 23/07/2013 13:35, j.mcke...@ru.ac.za wrote:
Quoting Frank Leonhardt :
There are two common ways of defining a subnet mask - one is a dotted
quad (e.g. 255.255.255.0) and the other is with a slash and the
number of low-order bits - e.g. 192.168.1.0/8. Eight bits here means
you get 2^8 add
broadcast too. is it not true? if
> yes, why dhcp server works correctly?
> please help me to clear my mind.
> regards,
> SAM
Regarding subnets:
192.168.0.0 netmask 255.255.0.0
is equivalent to
192.168.0.0/16
which splits it into a network id 192.168. and host id .0.0
Another example:
1
Quoting Frank Leonhardt :
There are two common ways of defining a subnet mask - one is a
dotted quad (e.g. 255.255.255.0) and the other is with a slash and
the number of low-order bits - e.g. 192.168.1.0/8. Eight bits here
means you get 2^8 addresses (i.e. 256). Don't use the first and la
ddresses are allocated to real hosts on the wider internet,
although IIRC some of the lower ones are reserved for use in documentation
(like example.com) - is that where the idea came from?!? :-)
Regards, Frank.
thanks Frank,
192 is just a sample. if i want to define 125.0.0.0 netmask 255.0.0.0, d
thanks Frank,
192 is just a sample. if i want to define 125.0.0.0 netmask 255.0.0.0, dhcp
server core dump either. you're right, it is better to use just some
limited addresses to avoid possible troubles. but i want to run my dhcp
server for all possible networks.
now my question is: if i d
On 23/07/2013 09:03, jb wrote:
s m gmail.com> writes:
...
subnet 192.0.0.0 netmask 255.0.0.0 {
range 192.0.0.1 192.255.255.255;
The 'range' denotes IP addresses that can be allocated to clients.
The IP 192.255.255.255 is a reserved broadcast address for the network.
jb
It's definitel
Then again, one can alway use "dhcpd -t" to test the configuration file.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org
On Tue, 18 Oct 2011, n dhert wrote:
isc-dhcp31-server was removes from the ports. The Freebsd Handbook still
refers to it...
Now fixed. Thanks for mentioning that!
Can a /usr/local/etc/dhcpd.conf configuration file from isc-dhcp31-server,
without changealso be used in isc-dhcp42-4.2.2 ?
F
On 10/18/2011 9:08 AM, Erik Nørgaard wrote:
On 18/10/2011 08:38, n dhert wrote:
isc-dhcp31-server was removes from the ports. The Freebsd Handbook still
refers to it...
Can a /usr/local/etc/dhcpd.conf configuration file from
isc-dhcp31-server,
without changealso be used in isc-dhcp42-4.2.2 ?
I
On 18/10/2011 08:38, n dhert wrote:
isc-dhcp31-server was removes from the ports. The Freebsd Handbook still
refers to it...
Can a /usr/local/etc/dhcpd.conf configuration file from isc-dhcp31-server,
without changealso be used in isc-dhcp42-4.2.2 ?
I think so, I use dhcp 4.1 and didn't change m
isc-dhcp31-server was removes from the ports. The Freebsd Handbook still
refers to it...
Can a /usr/local/etc/dhcpd.conf configuration file from isc-dhcp31-server,
without changealso be used in isc-dhcp42-4.2.2 ?
___
freebsd-questions@freebsd.org mailing
ed, 27 Jul 2011 10:49:42 +0800
>>> dave jones wrote:
>>>
>>>> Hi,
>>>>
>>>> I cat get an IP address from dhcp server by adding the line
>>>> in /etc/rc.conf:
>>>>
>>>> ifconfig_em0="DHCP"
>
t;>
>>> I cat get an IP address from dhcp server by adding the line
>>> in /etc/rc.conf:
>>>
>>> ifconfig_em0="DHCP"
>>>
>>> If I move my laptop to another place, I have to manually run
>>> "dhclient em0" to get an
Hi Christopher,
Thanks for your solution. It does help a lot, but there's one problem.
For example, DHCP server is not started for some reason and my computer's
ethernet cable is plugged. Once dhcp server started, I can't get the IP unless
I unplug and then plug the ethernet cab
On Wed, 27 Jul 2011 10:49:42 +0800
dave jones wrote:
> Hi,
>
> I cat get an IP address from dhcp server by adding the line
> in /etc/rc.conf:
>
> ifconfig_em0="DHCP"
>
> If I move my laptop to another place, I have to manually run
> "dhclient em0&qu
2011/7/26, dave jones :
> Hi,
>
> I cat get an IP address from dhcp server by adding the line in /etc/rc.conf:
>
> ifconfig_em0="DHCP"
>
> If I move my laptop to another place, I have to manually run "dhclient em0"
> to get an IP. Otherwise, it won
On Tue, Jul 26, 2011 at 9:49 PM, dave jones wrote:
> I cat get an IP address from dhcp server by adding the line in
> /etc/rc.conf:
>
> ifconfig_em0="DHCP"
>
> If I move my laptop to another place, I have to manually run "dhclient em0"
> to get an IP. Ot
Hi,
I cat get an IP address from dhcp server by adding the line in /etc/rc.conf:
ifconfig_em0="DHCP"
If I move my laptop to another place, I have to manually run "dhclient em0"
to get an IP. Otherwise, it won't get an IP automatically.
My question is it
I'm trying to add some sort of DHCP server functionality to my router
box running FreeBSD 7.1. First, let me explain the current network.
This is how my rc.conf is currently configured, and everything is
running smoothly:
gateway_enable="YES"
hostname="speedy.i"
ifconfig
connects to the Windows-based DHCP server, it
> not only does the normal DHCP functions (i.e. gets an IP), it also
> sets the hostname on the Windows server for that IP.
>
> i.e. when windows.example.org connects to dhcpserver.example.org, the
> dhcp server assigns to it 192.168.1.1 AND
On Mon, May 10, 2010 at 1:41 PM, Aleksandr Miroslav
wrote:
> I'm running FreeBSD 8.0-RELEASE on my work PC.
>
> My organization runs largely Windows desktops with a sizable chunk of
> Mac OS X machines.
>
> Whenever a Windows/Mac connects to the Windows-based DHCP server,
I'm running FreeBSD 8.0-RELEASE on my work PC.
My organization runs largely Windows desktops with a sizable chunk of
Mac OS X machines.
Whenever a Windows/Mac connects to the Windows-based DHCP server, it
not only does the normal DHCP functions (i.e. gets an IP), it also
sets the hostname o
on attached networks
>
Are you sure you are using the correct command to start the DHCP
client?
I'm not familiar with Archlinux, but on Debian linux the command
you
need is dhclient. On the other hand, dhcpd starts the dhcp
*server*
Yes
emed to be
the correct DHCP client site program.
> On the other hand, dhcpd starts the dhcp
> *server*
Correct.
--
Polytropon
>From Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
___
free
On Friday 24 October 2008, Svein Halvor Halvorsen wrote:
> Hi,
>
> I'm not sure if this is an issue with my dhcp server or the
client,
> but since I seem to get troubles with two different clients,
I'm
> thinki
On Behalf Of Svein Halvor Halvorsen
>Daniel Bye wrote:
>> On Fri, Oct 24, 2008 at 11:43:32AM +0200, Svein Halvor Halvorsen
wrote:
>>> I'm not sure if this is an issue with my dhcp server or the client,
but
>>> since I seem to get troubles with two different client
Daniel Bye wrote:
On Fri, Oct 24, 2008 at 11:43:32AM +0200, Svein Halvor Halvorsen wrote:
Hi,
I'm not sure if this is an issue with my dhcp server or the client, but
since I seem to get troubles with two different clients, I'm thinking it
might be the server:
I've got a
Wojciech Puchar wrote:
a lease, this happens:
[EMAIL PROTECTED]:~]$ dhcpcd -n eth0
eth0: dhcpcd 4.0.2 starting
eth0: broadcasting for a lease
eth0: offered 10.0.0.176 from 10.0.1.1 `mirrorball'
>
what's your netmask?
if /24 your d
a lease, this happens:
[EMAIL PROTECTED]:~]$ dhcpcd -n eth0
eth0: dhcpcd 4.0.2 starting
eth0: broadcasting for a lease
eth0: offered 10.0.0.176 from 10.0.1.1 `mirrorball'
what's your netmask?
if /24 your dhcp server is mis
On Fri, Oct 24, 2008 at 11:43:32AM +0200, Svein Halvor Halvorsen wrote:
> Hi,
>
> I'm not sure if this is an issue with my dhcp server or the client, but
> since I seem to get troubles with two different clients, I'm thinking it
> might be the server:
>
>
>
Hi,
I'm not sure if this is an issue with my dhcp server or the client, but
since I seem to get troubles with two different clients, I'm thinking it
might be the server:
I've got a FreeBSD 7.0-p4 machine running isc-dhcp3-server-3.0.5_2
serving my home network. When my L
Quoting Luke Dean <[EMAIL PROTECTED]>:
Will the DHCP server be this trouble-free if I switch my whole
network to dynamic IPs?
When the DHCP server goes offline, then comes back online, what happens?
M0n0wall does it (http://m0n0.ch). I run M0n0 on my 4801 (I'm not
using any
I'm running FreeBSD on a Soekris net4801. It boots from a read-only flash
card, and has no permanent writable storage media - only memory disks. It
runs several critical network services for me like DNS, and a firewall.
One important service that it does not currently run is a DHCP s
RX bytes:64499323 (61.5 MiB) TX bytes:8111327 (7.7 MiB)
Interrupt:23 Base address:0x2000
2. However, the FreeBSD server, stubbornly insists towards the
255.255.255.0 subnet
Both clients boot against the same DHCP server.
Any thoughts?
- thanks in advance.
On Wed, Mar 26, 2008 at 9:
Hello Erik,
Thanks for the response. I have followed your recommendation as follows:
1. In effect my dhcpd.conf now looks like this:
ddns-update-style interim;
ignore client-updates;
subnet 192.168.16.0 netmask 255.255.240.0 {
option routers 192.168.16.1;
opt
Hello all,
I wanted to check and test my PXE clients - where I have:
- Cent OS 5.1 - PXE/DHCP/TFTP/NFS server with the root-NFS-images
- client - FreeBSD 7:
uname -a
FreeBSD r02s01 7.0-RELEASE FreeBSD 7.0-RELEASE #1: Mon Mar 3 21:52:54
PST 2008 [EMAIL PROTECTED]:/usr/src/sys/amd64/compile/CU
> -Original Message-
> From: Wojciech Puchar [mailto:[EMAIL PROTECTED]
> Sent: 24 February 2008 08:56 PM
> To: Jaco le Roux
> Cc: freebsd-questions@freebsd.org
> Subject: Re: DHCP Server
>
> > BSD box, the other client is connected via a bridge on the first clie
BSD box, the other client is connected via a bridge on the first client. I
have a section in my /usr/local/etc/dhcpd.conf to assign a specific IP to
client #1:
host myhost {
hardware ethernet xx:xx:xx:xx:xx:xx;
fixed address 192.168.1.16;
}
The problem is, both client #1 and #2 get assigned th
Hi,
I am running dhcpd on my FreeBSD machine and have 2 clients that requests an
IP address. The one client is connected directly to the same network as the
BSD box, the other client is connected via a bridge on the first client. I
have a section in my /usr/local/etc/dhcpd.conf to assign a specifi
On Tue, Mar 06, 2007 at 07:03:35PM -0600, Martin McCormick wrote:
>
> I found some cook-book instructions for running dhcpd in
> a chroot environment. The article is 4 years old and appears to
> be set up for FreeBSD5x, but it isn't far off for FreeBSD6.2
> which is what I need dhcpd to run
/sbin/dhcpd. I haven't yet gotten it to launch as the
chroot'ed version. When one starts it, here is what happens:
chroot /usr/local/chroot/dhcpd /usr/local/sbin/dhcpd
Internet Systems Consortium DHCP Server V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights res
Darryl Hoar wrote:
Thanks Chuck. I do grok that rebooting is only really needed for new
kernel
installs. Just making network design decisions and want to avoid those
"Oh, crap" moments.
-Darryl
I haven't found too many mutually exclusive services on Unix. In
theory, if we did away with
> -Original Message-
> From: Chuck Swiger [mailto:[EMAIL PROTECTED]
> Sent: Thursday, January 18, 2007 2:28 PM
> To: [EMAIL PROTECTED]
> Cc: freebsd-questions@freebsd.org
> Subject: Re: DHCP server questions
>
>
> On Jan 18, 2007, at 11:59 AM, Darryl Hoar
On Jan 18, 2007, at 11:59 AM, Darryl Hoar wrote:
I am considering modifying my web/email server by adding DHCP server
duties to it. Any problems with this idea ? I can reboot the
server if
I need to without screwing up the clients that already have IP
assigned,
can't I ?
No, the
Greetings,
I am considering modifying my web/email server by adding DHCP server
duties to it. Any problems with this idea ? I can reboot the server if
I need to without screwing up the clients that already have IP assigned,
can't I ?
thanks,
D
On Mon, 6 Nov 2006 19:24:48 +0100 (CET)
"Gelsema, P \(Patrick\) - FreeBSD" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I would like to install a DHCP server in a jail. Is this possible? I
> am not sure as the DHCP server should be listening to broadcasts on
> the
Hi,
I would like to install a DHCP server in a jail. Is this possible? I am
not sure as the DHCP server should be listening to broadcasts on the
network with a certain content (DHCP_DISCOVER if I am not mistaken). I am
currently running 5.4 but will be upgrading to 6.2 if released.
Furthermore
Hi,
I would like to install a DHCP server in a jail. Is this possible? I am not
sure as the DHCP server should be listening to broadcasts on the network
with a certain content (DHCP_DISCOVER if I am not mistaken). I am currently
running 5.4 but will be upgrading to 6.2 if released.
Furthermore
Hi,
I would like to install a DHCP server in a jail. Is this possible? I am not
sure as the DHCP server should be listening to broadcasts on the network
with a certain content (DHCP_DISCOVER if I am not mistaken). I am currently
running 5.4 but will be upgrading to 6.2 if released.
Furthermore
the DHCPD box is also your nameserver
}
###END DHCPD.CONF
--- BSD Mail <[EMAIL PROTECTED]> wrote:
> Hello everyone,
>
> I'm configuring a gateway machine with 3 network
> interfaces
> int_ext (rl0) will obtained a real static IP from a
> public
Hello everyone,
I'm configuring a gateway machine with 3 network interfaces
int_ext (rl0) will obtained a real static IP from a public dhcp server.
int_dmz (fxp0) 10.0.1.1/24 <http://10.0.1.1/24>
> both internal networks will need a dhcp server to assign them the right
subne
-questions@freebsd.org
Subject: Re: DHCP Server Offline.
I Found out the Problem,
The /var partation is full.
How do i find out where is taking up all the space?
Thanks
>From: Ean Kingston <[EMAIL PROTECTED]>
>To: freebsd-questions@freebsd.org
>CC: [EMAIL PROTECTED]
>Subject: Re: DHC
where is taking up all the space?
>
>
> Thanks
>
>>From: Ean Kingston <[EMAIL PROTECTED]>
>>To: freebsd-questions@freebsd.org
>>CC: [EMAIL PROTECTED]
>>Subject: Re: DHCP Server Offline.
>>Date: Fri, 15 Jul 2005 10:18:09 -0400
>>
>>On July 15, 20
I Found out the Problem,
The /var partation is full.
How do i find out where is taking up all the space?
Thanks
From: Ean Kingston <[EMAIL PROTECTED]>
To: freebsd-questions@freebsd.org
CC: [EMAIL PROTECTED]
Subject: Re: DHCP Server Offline.
Date: Fri, 15 Jul 2005 10:18:09 -0400
On J
On July 15, 2005 10:11 am, Stephan Weaver wrote:
> Hello folks,
>
> I have a Stand Alone FreeBSD Firewall / Nat / Dhcp Server.
> Everything seems to work fine, up until this morning.
> Users seem to complain they could not get on the network anymore.
>
> Further investigat
Hello folks,
I have a Stand Alone FreeBSD Firewall / Nat / Dhcp Server.
Everything seems to work fine, up until this morning.
Users seem to complain they could not get on the network anymore.
Further investigation revealed the dhcp server could not be contacted.
Further more, only some of the
> Is there a way to test the DHCP server, without
> running dhclient and thus without losing my FreeBSD
> system's IP configuration?
Hi,
try dhcping from ports (net/dhcping).
Read carrefully man pages, the idea of operation was not clear
at first look (for me :-) but it
On 5/30/05, Rob <[EMAIL PROTECTED]> wrote:
> Is there a way to test the DHCP server, without
> running dhclient and thus without losing my FreeBSD
> system's IP configuration?
I'm just throwing a random idea out here, I have no clue if it'd
actually work, but what
server.
Although the gateway still functions as a gateway,
the DHCP server might not be handing out IP numbers
anymore (I suspect that the dhclients of the Windows
PCs are desperately hanging on to their old IP
numbers, although already expired).
I want to communicate with the DHCP server from my
On Mar 16, 2005, at 1:03 PM, Darryl Hoar wrote:
Should I dedicate an entire machine to being a DHCP server ? Or will
the load be minimal and I can put the DHCP server functionality on my
webserver ?
A DHCP server is very lightweight, and you can run one on a machine
used for other tasks just
>
> Greetings,
> I want to setup a DHCP server on my internal (private 192.168.1.X) network.
> I already have a Freebsd machine on the network as a webserver.
>
> Should I dedicate an entire machine to being a DHCP server ? Or will
> the load be minimal and I ca
Greetings,
I want to setup a DHCP server on my internal (private 192.168.1.X) network.
I already have a Freebsd machine on the network as a webserver.
Should I dedicate an entire machine to being a DHCP server ? Or will
the load be minimal and I can put the DHCP server functionality on my
Hi,
I have a question and how a can sovled my problem.
Installed form the Port:
- POPTOP
- DHCP Server
Now, i have a external connection with PPTP (poptop) in the freebsd i
see tun0 active, that very good.
But now send the end of the tunnel hardware (a AccessPoint whith dhcp
relay) DHCP Request
x neither gets an IP, singley they
work fine. Cabling is working, and i'm out of ideas as to what to try.
The subject implies that you are connecting both NICs to the same subnet. The
simple answer is that this won't work-- it's not useful.
A more complex answer is that you could
Hello,
I've got a machine that i need to give two separate addresses to using
two nics, both of which are 3c905's, working fine under 5.2.1. I've got
lines in rc.conf set so they both get their addresses via dhcp, however this
isn't working. Having both cards in the box neither gets an IP, sing
Sent: Thursday, April 08, 2004 3:42 PM
To: [EMAIL PROTECTED]
Subject: configuring freebsd dhcp server/router to listen on device
Hello,
Im trying to move away from my linksys wireless router and move onto
an
old Pentium 200 Mhz I have. It will be the gateway between my modem
and
my network. I
Hello,
Im trying to move away from my linksys wireless router and move onto an
old Pentium 200 Mhz I have. It will be the gateway between my modem and
my network. I installed isc-dhcp3 on the box and took the sample dhcp.conf
file in the freebsd handbook. I edited this file to suite my needs but
[ It is intended for someone who might have a small home network and
wants to staticly assign IPs using DHCP on a FreeBSD host in a way that
closely resembles the network configuration one would get simply by
using the out-of-box network config using one of those Linksys
broadband router
So I would remove the "range" entry?
Thanks,
JP
--- Charles Swiger <[EMAIL PROTECTED]> wrote:
> > I have successfully set up my DHCP server on
> FreeBSD
> > 5.2 but have a question. I only want my DHCP
> server
> > to hand out IPs to known MAC addresses en
I have successfully set up my DHCP server on FreeBSD
5.2 but have a question. I only want my DHCP server
to hand out IPs to known MAC addresses entered into
dhcpd.conf how can I do this?
Create entries which look like this:
host linksys {
hardware ethernet 00:20:78:d2:03:05;
fixed-address
Hello All--
I have successfully set up my DHCP server on FreeBSD
5.2 but have a question. I only want my DHCP server
to hand out IPs to known MAC addresses entered into
dhcpd.conf how can I do this? I don't care of the
same IP is always handed out to the same card.
Thank
Hi list,
I've set up a DHCP server but I'd like to know
which address (from address pool) hasn't assigned
to any machine. Is there command line to accomplish
this.
PS. I use ISC-DHCP v.3 installed from po
Dragoncrest wrote:
I'm looking to take an old P120 with 128m of ram and turn it into a lan
DHCP server. The thing is, the guys who will be pulling DHCP addresses
are cream of the crop computer users who really know their way around.
So I plan to have all network services (minus DHCP of c
I'm looking to take an old P120 with 128m of ram and turn it into a lan
DHCP server. The thing is, the guys who will be pulling DHCP addresses
are cream of the crop computer users who really know their way around.
So I plan to have all network services (minus DHCP of course) turned off
On Tuesday 30 December 2003 09:17 am, stan wrote:
> I need to use a STABLE machine for a DHCP server.
>
> Man -k and looking in /etc/defaults/rc.conf don't seem to point me to the
> server side of this protocol.
>
> Do I need to add a port? If so what's the best one?
I need to use a STABLE machine for a DHCP server.
Man -k and looking in /etc/defaults/rc.conf don't seem to point me to the
server side of this protocol.
Do I need to add a port? If so what's the best one?
--
"They that would give up essential liberty for temporary safety
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Wednesday 26 November 2003 15:13, [EMAIL PROTECTED] wrote:
> Port: isc-dhcp3-3.0.1.r12
> Info: ISC Dynamic Host Configuration Protocol client and server code
I use this and it's fine; the configuration file is easy to understand, and it
i
[EMAIL PROTECTED] writes:
> I'm about to set up a DHCP-server. In the ports-coll I found these:
>
> Port: isc-dhcp3-3.0.1.r12
> Info: ISC Dynamic Host Configuration Protocol client and server code
>
> Port: wide-dhcp-1.4.0.6_2
> Info: Dynamic Host Co
Been using the ISC DHCP server for years now. No problems to report, and
not too onerous to set up.
Also allows you to do dynamic updates to the ISC BIND port as well.
Jon
On Wed, 2003-11-26 at 15:13, [EMAIL PROTECTED] wrote:
> Hi,
>
> I'm about to set up a DHCP-server. In th
Hi,
I'm about to set up a DHCP-server. In the ports-coll I found these:
Port: isc-dhcp3-3.0.1.r12
Info: ISC Dynamic Host Configuration Protocol client and server code
Port: wide-dhcp-1.4.0.6_2
Info: Dynamic Host Configuration Protocol, WIDE Implementation
Any suggestions / exper
IAccounts <[EMAIL PROTECTED]> writes:
> > > Alternatively is there a way to dynamically tell BIND to get it's
> > > forwarders list from /etc/resolv.conf?
> >
> > This could be done pretty much the same way. I thought I'd done it on
> > my system, but as I look at named.conf, I don't seem to have
ted in any case if you wish to
> use named else it will write an /etc/resolv.conf containing the values
> given by the DHCP server. Something like this is all it takes to keep
> it from changing your resolv.conf:
>
> #!/bin/sh
> make_resolv_conf() {
> }
I know.
> Naturally
e an /etc/resolv.conf containing the values
given by the DHCP server. Something like this is all it takes to keep
it from changing your resolv.conf:
#!/bin/sh
make_resolv_conf() {
}
Naturally, one could expand my null'ed make_resolv_conf() to 1) verify
DNS servers have changed, and 2) write them
On Sat, 8 Mar 2003, IAccounts wrote:
> > > Alternatively is there a way to dynamically tell BIND to get it's
> > > forwarders list from /etc/resolv.conf?
Here is a shell script snippet that I use on my laptop. It gets
called from make_resolv_conf() in /etc/dhclient-enter-hooks, where I
make sure
> > Alternatively is there a way to dynamically tell BIND to get it's
> > forwarders list from /etc/resolv.conf?
>
> This could be done pretty much the same way. I thought I'd done it on
> my system, but as I look at named.conf, I don't seem to have ever
> finished the shell script to auto-generat
w I can setup a nameserver on the gateway and configure DHCP to send
> it's own IP as the nameserver to use, but I was wondering if there is a
> way to have the dhcp server get the name server values from say
> /etc/resolv.conf?
You should be able to do that by writing a dhclient hook
IP as the nameserver to use, but I was wondering if there is a
way to have the dhcp server get the name server values from say
/etc/resolv.conf?
Alternatively is there a way to dynamically tell BIND to get it's
forwarders list from /etc/resolv.conf?
thanks!
-philip
To Unsubscribe: send
On Wed, Nov 13, 2002 at 12:15:06AM -0800, Jonas Fornander wrote:
> I want to install a DHCP server on 4.7. In the Latest/packages I can only find the
>following packages that refers to dhcp:
>
> dhcpconf
> dhcpdump
> dchping (?)
>
> Is any of those the server? If n
I want to install a DHCP server on 4.7. In the Latest/packages I can only find the
following packages that refers to dhcp:
dhcpconf
dhcpdump
dchping (?)
Is any of those the server? If not, which package is the server?
Jonas Fornander
Netwood Communications,LLC
To Unsubscribe: send mail to
Bert Hiddink [Bendoo] wrote:
> Hello,
>
> I have a LAN which looks like this:
>
> Internet ---> Cablemodem---> Router with DHCP-service ---> 2 Winboxes, 1 Freebsd box
> I have 4.6.2. release installed on the FreeBSD box.
>
> The router has an DHCP service and IP's are dynamicly assigned to th
Hello,
I have a LAN which looks like this:
Internet ---> Cablemodem---> Router with DHCP-service ---> 2 Winboxes, 1 Freebsd box
I have 4.6.2. release installed on the FreeBSD box.
The router has an DHCP service and IP's are dynamicly assigned to the 3 machines
within my LAN.
However, when I
93 matches
Mail list logo