On 01/25/11 10:41, Da Rock wrote:
On 01/25/11 18:46, Bruce Ferrell wrote:
On 01/24/2011 11:13 PM, Da Rock wrote:
I have been trying to get some pointers on my asterisk issues and I've
only been hearing crickets chirping (Asterisk list and here). I need a
pointer or two so I can fix this
On 01/25/11 18:46, Bruce Ferrell wrote:
On 01/24/2011 11:13 PM, Da Rock wrote:
I have been trying to get some pointers on my asterisk issues and I've
only been hearing crickets chirping (Asterisk list and here). I need a
pointer or two so I can fix this issue, so I'll try ano
On 01/24/2011 11:13 PM, Da Rock wrote:
> I have been trying to get some pointers on my asterisk issues and I've
> only been hearing crickets chirping (Asterisk list and here). I need a
> pointer or two so I can fix this issue, so I'll try another angle.
>
> How do I tr
On 01/25/11 07:13, Da Rock wrote:
I have been trying to get some pointers on my asterisk issues and I've
only been hearing crickets chirping (Asterisk list and here). I need a
pointer or two so I can fix this issue, so I'll try another angle.
How do I trace IP packets across the n
I have been trying to get some pointers on my asterisk issues and I've
only been hearing crickets chirping (Asterisk list and here). I need a
pointer or two so I can fix this issue, so I'll try another angle.
How do I trace IP packets across the network (pf firewall included)? And
w
I have a FreeBSD 8.1 pf firewall, and a FreeBSD 8.1 system running
Asterisk 1.8. I have been hammering at this for a few weeks now with
little forward progress. I'm about to go nuts trying to figure out what
the hell is going on.
I have set up asterisk to trunk to my provider, and origi
# kldunload -f zaptel
kldunload: can't unload file: Device busy
=
Dec 20 14:21:39 freebsd kernel: kldunload: attempt to unload file that
was loaded by the kernel
=
What is the right way to upgrade Zaptel, without rebooting the host?
please stop asterisk first to be ab
On Sat, 20 Dec 2008 14:25:28 +0100, Gilles
wrote:
>Since the Ports collection showed that there were more recent versions
>of Asterisk and Zaptel, I tried to compile/install Zaptel, but it
>fails, even after stopping Zaptel cleanly, and even after stopping
>Asterisk itself:
After
Hello
Since the Ports collection showed that there were more recent versions
of Asterisk and Zaptel, I tried to compile/install Zaptel, but it
fails, even after stopping Zaptel cleanly, and even after stopping
Asterisk itself:
=
# kldstat
Id Refs AddressSize Name
1 14
Hi,
I found that the update for Asterisk update is broken after run the latest CVS
update and portupgrade. The system is not able to find the correct files from
the sources. Please check on that.
Thank you
Kenneth
___
freebsd-questions@freebsd.org
OS: FreeBSD 7.0-RELEASE-p5 (i386)
Asterisk: 1.4.21.2_5
I dont wanna install old version asterisk ( /usr/ports/net/asterisk12).
##
# pwd
/usr/ports/net/asterisk
# make
===> Vulnerability check disabled, database not found
===> Found
At 11:02 AM 6/26/2008, Michael Fleming wrote:
Can anybody point me in the right direction to open TCP port
2000 for cisco-sccp.
I've installed Asterisk Ok but the phones can't make a
connection on that port, plus trying to connect localhost has
the same affect "connection refuse
Can anybody point me in the right direction to open TCP port
2000 for cisco-sccp.
how you mean open?
I've installed Asterisk Ok but the phones can't make a
connection on that port, plus trying to connect localhost has
the same affect "connection refused".
I know if I want
Can anybody point me in the right direction to open TCP port
2000 for cisco-sccp.
I've installed Asterisk Ok but the phones can't make a
connection on that port, plus trying to connect localhost has
the same affect "connection refused".
I know if I want a well known servi
Can anybody point me in the right direction to open TCP port
2000 for cisco-sccp.
I've installed Asterisk Ok but the p
Can anybody point me in the right direction to open TCP port
2000 for cisco-sccp.
I've installed Asterisk Ok but the p
works. thank you very much!
On Sat, 14 Jun 2008, Sahil Tandon wrote:
Wojciech Puchar <[EMAIL PROTECTED]> wrote:
undefined reference to `__sync_fetch_and_add_4'
anyone know where these __sync_* functions are?
Do you set CPUTYPE in /etc/make.conf? There has been some discussion about
this
Wojciech Puchar <[EMAIL PROTECTED]> wrote:
> undefined reference to `__sync_fetch_and_add_4'
>
> anyone know where these __sync_* functions are?
Do you set CPUTYPE in /etc/make.conf? There has been some discussion about
this before; check the archives for some commonly suggested solutions.
--
ends with this at linking:
__sync_sub_and_fetch_4'
manager.o(.text+0x1c09): In function `accept_thread':
/usr2/ports/net/asterisk/work/asterisk-1.4.20.1/include/asterisk/lock.h:1118:
undefined reference to `__sync_fetch_and_add_4'
manager.o(.text+0x4b5c): In function `action_wa
ssary.
But the pkgtools are useful. Start with pkg_info(1) and read on from
there. Most work with ports too.
One file you will have to edit is rc.conf(5)
>
> 2.) We are also big into VoIP and just realized that FreeBSD 7.0 will
> not build asterisk-addons on our home/production serve
is this it?)
2.) We are also big into VoIP and just realized that FreeBSD 7.0 will
not build asterisk-addons on our home/production servers. So after
losing a ton of sleep we are now having to revert back to FreeBSD 6.2.
In short, can anyone fill us in to which FreeBSD distribution is
"
On Mon, 3 Sep 2007 10:22:22 -0400
Dantavious <[EMAIL PROTECTED]> wrote:
> Hi,
> I am having problems compiling this port. Here is the output.
> Can you assist me with this issue.
>
> ===> Building for asterisk-addons-1.4.2
> gmake[1]: Entering directory
Hi,
I am having problems compiling this port. Here is the output.
Can you assist me with this issue.
===> Building for asterisk-addons-1.4.2
gmake[1]: Entering directory
`/usr/ports/net/asterisk-addons/work/asterisk-addons-1.4.2'
gmake[2]: Entering directory
`/usr/ports/net/
On 6/5/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
On Tue, 5 Jun 2007, perikillo wrote:
> Hi people.
>
> Im trying to setup my first PBX system with asterisk from ports, my
ports
> are updated, i install asterisk 1.4.4, gastaman, zaptel driver, but went
i
> try to in
On Tue, 5 Jun 2007, perikillo wrote:
Hi people.
Im trying to setup my first PBX system with asterisk from ports, my ports
are updated, i install asterisk 1.4.4, gastaman, zaptel driver, but went i
try to install asterisk-addons i receive this error:
asteriskbsd# make install clean
Hi people.
Im trying to setup my first PBX system with asterisk from ports, my ports
are updated, i install asterisk 1.4.4, gastaman, zaptel driver, but went i
try to install asterisk-addons i receive this error:
asteriskbsd# make install clean
===> Vulnerability check disabled, datab
Hi There,
Is there anybody who installed asterisk on freebsd
4.11 release ?
I was not succesful. please guide me.
I updated the ports and I installed the lib using
ports but when I try to install zaptel it says cannot
load it for release before than 5
I couldn't install the asterisk from
On 23 August 2006, at 17:43, Mansour Safaie wrote:
dedi513# cd /usr/ports/misc/zaptel/
dedi513# make install clean
===> zaptel-1.0 does not build on FreeBSD \< 5.x.
This is obvious - it says it doesn't build on FBSD that is lower than
version 5.
dedi513# make install clean
"Makefile", l
Hi There,
Is there anybody who installed asterisk on freebsd 4.11 release ?
I was not succesful. please guide me.
I updated the ports and I installed the lib using ports but when I try to
install zaptel it says cannot load it for release before than 5
I couldn't install the asterisk from
On Jun 3, 2006, at 12:32 PM, Jason Lixfeld wrote:
I don't like the idea of having to run Linux because their system
tools just don't compare to FreeBSD, but I have had bad experience
in the past with FreeBSD + Asterisk using software timing. This
time around, I have a TDM400P w
I don't like the idea of having to run Linux because their system
tools just don't compare to FreeBSD, but I have had bad experience in
the past with FreeBSD + Asterisk using software timing. This time
around, I have a TDM400P with an FXO for timing, but I'm not sure
Hello Gavin,
Wednesday, January 25, 2006, 1:16:42 PM, you wrote:
GC> Add the following to /etc/make.conf
Why not "make config"?
GC> WITHOUT_H323=yes # asterisk
If disable this one (i disabled it in menu), all Ok.
GC> WITHOUT_ZAPTEL=yes
with zaptel all compiled good
Add the following to /etc/make.conf
WITHOUT_H323=yes # asterisk
WITHOUT_ZAPTEL=yes
WITHOUT_ODBC=yes
WITHOUT_FAX=yes
and try again... I hit this very issue last night.
Gavin
On 1/25/06, Playnet <[EMAIL PROTECTED]> wrote:
>
> Hello freebsd-questions,
>
> sstand# make cle
Hello freebsd-questions,
sstand# make clean;make
asterisk-1.4: "/usr/ports/devel/pwlib:build" non-existent -- dependency list
incomplete
asterisk-1.4: "/usr/ports/net/openh323:build" non-existent -- dependency list
incomplete
===> asterisk-1.4 depends on file: /
Webster, Andrew wrote:
I have Asterisk 1.0.8-BRIstuffed-0.2.0-RC8h running on 5.4-p6 without
any problems.
Well..I already switched to a Gentoo Linux-2.16.x box..
runs prefectly even with spandsp fax reception...
best regards
rick
___
freebsd
I have Asterisk 1.0.8-BRIstuffed-0.2.0-RC8h running on 5.4-p6 without
any problems.
Regards,
Andrew
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Richard
Klingler
Sent: Wednesday, January 04, 2006 08:09
To: freebsd-questions@freebsd.org
Subject
Hello...
Still trying to resolve some crash issues and unknown
log messages on asterisk-1.0.8 from fbsd 5.4 ports..
What versions are other people using here?
- Better to move to fbsd 6.0?
- compile latest asterisk-1.2.1 from sources?
I'm getting shitloads of:
Jan 5 15:47:43 WARNING[
http://www.voip-info.org/wiki-Asterisk+FreeBSD May give you some help.
Check the Installation section where it reccomends setting "noload =>
pbx_wilcalu.so" in the modules.conf. I just found it while I was
setting one up myself. I am not sure if it applies for you or not. Let
Hello..
Is anyone using Asterisk from /usr/ports under
FBSD 5.4 or 6.0?
After a while the CPU load goes to 99% without
any information in message logs...
I know that FBSD is a bad platform for asterisk (o;
thanx in advance
rick
___
freebsd
Kiffin Gish wrote:
Has anyone had any experience running Asterisk on FreeBSD 5.x ?
If so, then which drivers are required and what is the best way to install
the system?
Thanks a lot in advance.
Successfully running asterisk (with sip functionality only) on
FreeBSD-6.0 RELEASE
stop) part of the script and no more panics.
For merely starting asterisk with zaptel loaded causes a panic. For
details see:
<http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/89107>
Cheers,
--
Mark A. R. Knight finger: [EMAIL PROTECTE
Igor Robul wrote:
On Sat, Nov 19, 2005 at 02:01:39PM -0500, Bill Moran wrote:
I don't have first hand experience with the analog drivers, but the
rumor mill has it that the recent versions work very well.
Analog drivers (misc/zaptel) worked fine with Intel 80537 based winmodem
on FreeBSD 5.4-
On Sat, Nov 19, 2005 at 02:01:39PM -0500, Bill Moran wrote:
> I don't have first hand experience with the analog drivers, but the
> rumor mill has it that the recent versions work very well.
Analog drivers (misc/zaptel) worked fine with Intel 80537 based winmodem
on FreeBSD 5.4-STABLE, but on 6.0 t
On 11/20/05 00:21 Kiffin Gish said the following:
Has anyone had any experience running Asterisk on FreeBSD 5.x ?
If so, then which drivers are required and what is the best way to install
the system?
you can build asterisk, libpri and zaptel from the ports and reports on the
asterisk-bsd
On Sat, 19 Nov 2005 17:21:03 +0100
"Kiffin Gish" <[EMAIL PROTECTED]> wrote:
> Has anyone had any experience running Asterisk on FreeBSD 5.x ?
>
> If so, then which drivers are required and what is the best way to install
> the system?
I've run * on my FreeBS
* Kiffin Gish [2005-11-19 17:21 +0100]
> Has anyone had any experience running Asterisk on FreeBSD 5.x ?
Yes!
> If so, then which drivers are required and what is the best way to install
> the system?
I only use sip, so no drivers.
__
Has anyone had any experience running Asterisk on FreeBSD 5.x ?
If so, then which drivers are required and what is the best way to install
the system?
Thanks a lot in advance.
--
Kiffin Rex Gish
Gouda, The Netherlands
___
freebsd-questions
Owen Jeremiah <[EMAIL PROTECTED]> writes:
> I'm a newbie at FreeBSD, been using MS products all my life. Being an
> enlighten one (:P), trying to learn how to use FreeBSD.
> Got this problem when trying to install asterisk from ports:
>
> ===> asterisk-1.0.9_2
I'm a newbie at FreeBSD, been using MS products all my life. Being an
enlighten one (:P), trying to learn how to use FreeBSD.
Got this problem when trying to install asterisk from ports:
===> asterisk-1.0.9_2 depends on executable: mpg123 - found
===> asterisk-1.0.9_2 depe
On Sun, Oct 16, 2005 at 07:27:40PM +0200, Kiffin Gish wrote:
> I was just wondering which (free) soft-phones were available on FreeBSD
> I can use to play around with my asterisk setup.
I've had success with kphone and linphone. I prefered kphone, but I
could never get multiple sou
I was just wondering which (free) soft-phones were available on FreeBSD
I can use to play around with my asterisk setup.
--
Kiffin Gish
Gouda, The Netherlands
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
All,
Does anyone knows if modem generic - Ambient MD3200 - works with
asterisk in freebsd 5.3 ?
There is some special thing to do about it ?
Thanks a lot,
Giuliano
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
Hi,
i have installed the asterisk pbx port, does anyone know about
isdn hardware to work with ?
thanx thomas
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.799 / Virus Database: 543 - Release Date: 19.11.2004
On Wed, 2 Jun 2004 15:28:15 +0200
"Thomas May" <[EMAIL PROTECTED]> wrote:
> Can someone help me ?
>
> asterisk# make install
>
> ===> asterisk-0.9.0 depends on file: /usr/local/lib/mysql/libmysqlclient.a
> - found
>
> ===> asterisk-0
On Wed, Jun 02, 2004 at 03:28:15PM +0200, Thomas May wrote:
> Can someone help me ?
Did you read that URL? The software has a security vulnerability.
Talk to the software developers about its status.
Kris
pgpOsDoJ3FWmF.pgp
Description: PGP signature
Can someone help me ?
asterisk# make install
===> asterisk-0.9.0 depends on file: /usr/local/lib/mysql/libmysqlclient.a
- found
===> asterisk-0.9.0 depends on file: /nonexistent - not found
===>Verifying build for /nonexistent in /usr/ports/devel/pwlib
===> pwli
56 matches
Mail list logo