Hello everyone,
I booted with acpi disabled, it worked.
BUT
I checked with HP, they had bios upgrdae,
I upgraded my bios and guess what??
It boots normal, and works fine,
i donot need to do any additional configuration,the acpi is supported and
the tempreture
message has gone after bios
Marwan Sultan wrote:
Well, i have HP laptop dv5178us model.
i installed freebsd 6.1, after installation is complete, it will ask you
to remove any cd and reboot
till here is fine
after i reboot, it hangs!!
nothing happens! nothing moves!! just blank black dead screen!!
I installed fbsd
hello,
Well, I did what im doing since 7 years on desktops! just inserted the cd,
startedup the laptop
and asked for installation, then the normal procedures, you know?
partitioning..etc..
when the installation done, i removed the cd and restarted, but the laptop
freeze..on a black screen,
Marwan Sultan wrote:
Well, I did what im doing since 7 years on desktops! just inserted the
cd, startedup the laptop
and asked for installation, then the normal procedures, you know?
partitioning..etc..
when the installation done, i removed the cd and restarted, but the
laptop freeze..on a
Marwan Sultan wrote:
hello,
Well, I did what im doing since 7 years on desktops! just inserted the
cd, startedup the laptop
and asked for installation, then the normal procedures, you know?
partitioning..etc..
when the installation done, i removed the cd and restarted, but the
laptop
Check your BIOS that you don't have protection of the boot block enabled.
If you do, remove that protection and reinstall.
Some laptops can get stuck, and you have to pull the battery and AC power
then restore the AC power to get them to restart.
-Derek
At 05:35 PM 7/18/2006,
hey guys!
thanks for all of you, it was the fbsd boot loader, as eric suggested.
now its booting,
BUT :(
during booting it givis the following error
Warning: System tempreture too high shutting down soon!
acpi_tz1: Warning current tempreture (0.0c) exceeds safe limits
and it shuts down
Marwan Sultan wrote:
hey guys!
thanks for all of you, it was the fbsd boot loader, as eric suggested.
now its booting,
BUT :(
during booting it givis the following error
Warning: System tempreture too high shutting down soon!
acpi_tz1: Warning current tempreture (0.0c) exceeds safe
Well, i have HP laptop dv5178us model.
i installed freebsd 6.1, after installation is complete, it will ask you to
remove any cd and reboot
till here is fine
after i reboot, it hangs!!
nothing happens! nothing moves!! just blank black dead screen!!
I installed fbsd again, and the