For example, I have been trying to install the vmware3 port - and I find
all kinds of tidbits all over the web about little things that need to
be done to get it to work. The information sometimes covers version
2.0, sometimes 3.2, and sometimes 4.5. If someone just goes in to
Hi,
I am tryin to setup my Firewall on my server, so far i have the following.
===
oif=bge0
fwcmd=ipfw
$fwcmd -f flush
$fwcmd add check-state
$fwcmd add allow ip from any to any via lo0
$fwcmd add deny ip from any to 127.0.0.0/8
$fwcmd
Good day!
I've already installed the binary package of wine
for freebsd which i've downloaded from winehq. My
problem is that, no matter how hard I read the
configuration section of their documentation, I can't
figure out how the software works...
I've already copied the example config file I
hi
my freebsd machine is 192.168.1.34 with one jail running on
192.168.1.35 (dc0_alias), and i have one more separate win2k box:
192.168.1.33, i want to filter that jail with ipf, so that it cannot
access anything running on that win2k machine and anything bind to the
primary fbsd IP, but i want
I have a broken fs dump I need to fix. Is there a diagnostic/repair tool I can
use? I know about restore -N.
No I didn't verify, and yes that was a mistake
Dump was taken on 4.10. Restoring on 5.3BETA, although I can change that.
Content is our Samba server home directories. I need to extract
hi,guys
I installed fetchyahoo and when I run fetchyahoo
It told me
Logging in securely via SSL as
Failed: Couldn't get challenge to log in, Try again
later,
any comments on this?
Thanks in advance!!!
Whatluo
__
Do you Yahoo!?
allright, nevermind, this solved it:
pass in quick on lo0 proto tcp from 192.168.1.34 to 192.168.1.35 port
= 22 flags S keep state
block out quick on lo0 proto tcp/udp from 192.168.1.35 to 192.168.1.34
keep state keep frags
___
[EMAIL PROTECTED] mailing
Hi,
I wan't to access my pc at work from home through
freebsd's sshd. Is it possible?, knowing that it
doesn't have a public ip address? That workstation of
mine is only gaining internet access through LAN
servers and routers. Will it help if I know the
gateway ip where my workstation passes
as the default instalation of openssh becomes deprecated, I don't know
which of the ports should I use, openssh or openssh-portable ?
what are the differences between them (besides the version number,
openssh-portable being the latest version, while openssh is only 3.6) ?
thanks in advance,
I believe that openssh is openBSD's while portable is meant to be
installed on other OSes. Portable is your choice here.
Cristi
Petre Bandac wrote:
as the default instalation of openssh becomes deprecated, I don't know
which of the ports should I use,
so what is the difference between 2?i think , ule is not so good as they told me ,so
slow.
==
263___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Thu, 30 Sep 2004 02:54:58 -0700 (PDT)
Mark Jayson Alvarez [EMAIL PROTECTED] wrote:
Hi,
I wan't to access my pc at work from home through
freebsd's sshd. Is it possible?, knowing that it
doesn't have a public ip address? That workstation of
mine is only gaining internet access through
Thank you both very much. This did indeed resolve my issues and I am
now
getting FreeBSD 5.3-BETA6 configured on my problem system.
Ben
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gavin Atkinson
Sent: Wednesday, September 29, 2004 12:50 PM
To:
My question is in the subject.
If you search in port collection you will see: sendmail and sendmail-sasl.
sendmail-sasl contains only Makefile, I supouse that it compile the
sendmail port with SASL paramether and others.
But why I must install sendmail port if I see that Sendmail is up and
running
On 9/29/2004 at 11:27 PM [EMAIL PROTECTED] wrote:
|I'll post some numbers after trying it. But its pretty frightening to
|think that one release has such major changes. Sounds like (yet another)
|crapshoot. ...
=
If you had taken the time to read and understand the release notes
Why do you no use pkg_add instead port collection?
Remember that one are binary and the other is maded from the source, but
it is more simple.
Regards
--
Gustavo Ariel Kullak
e-mail:[EMAIL PROTECTED]
--
Gustavo Ariel Kullak
e-mail:[EMAIL PROTECTED]
TE particular: (011) 4966-1246
TE
I recompiled my kernel, including the options EXT2FS option line. No
problem. After rebooting, I was able to successfully mount my linux
drive thusly:
mount -t ext2fs /dev/ad0s1 /linux
I transferred some files and was very happy.
Now here's the frustrating bit. Time has passed and the
Hi everybody,
Here is my (weird) problem ...
I opened /etc/spwd.db with ee and exited (which was actually a very bad
idea, even if I did not modified anything). At this time, everything was
still ok.
Then, a few minutes later, I tried to su ... Impossible : I get some
weird error message
Grégory Nou wrote:
May sound as a stupid question, but did you actually logged as root, or
su before performing this command ?
[EMAIL PROTECTED] wrote:
Have you tried to mount the drive as root?
Heh. Yes indeed, first thing I tried. I've also tried mounting the drive
as virtually every other
How I response to a question?
--
Gustavo Ariel Kullak
e-mail:[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
How I response to a question?
--
Gustavo Ariel Kullak
e-mail:[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
How I response to a question?
--
Gustavo Ariel Kullak
e-mail:[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
sysctl -a | grep securelevel ?
Regards
S.
On Thu, 30 Sep 2004 08:52:06 -0500, Damon Butler [EMAIL PROTECTED] wrote:
Grégory Nou wrote:
May sound as a stupid question, but did you actually logged as root, or
su before performing this command ?
[EMAIL PROTECTED] wrote:
Have you tried to
[EMAIL PROTECTED] wrote:
Hi everybody,
Here is my (weird) problem ...
I opened /etc/spwd.db with ee and exited (which was actually
a very bad
idea, even if I did not modified anything). At this time, everything
was still ok.
Then, a few minutes later, I tried to su ... Impossible : I get
On Thu, 30 Sep 2004 15:44:32 +0200, Grégory Nou [EMAIL PROTECTED] wrote:
Hi everybody,
Hello,
Here is my (weird) problem ...
I opened /etc/spwd.db with ee and exited (which was actually a very bad
idea, even if I did not modified anything). At this time, everything was
still ok.
Indeed a
When I add
$fwcmd add allow ip from any to any established
The messages go away, but when I remove it they come back, I ran a tcpdump
it seems most of the packet just have ACK set?
Im not to sure whats going on?
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.com
On Thu, 30 Sep 2004 22:32:16 +1000, Steven Adams [EMAIL PROTECTED] wrote:
When I add
$fwcmd add allow ip from any to any established
The messages go away, but when I remove it they come back, I ran a tcpdump
it seems most of the packet just have ACK set?
If this works for you then the
On Thu, 30 Sep 2004 02:03:15 -0400, bsdfsse [EMAIL PROTECTED] wrote:
For example, I have been trying to install the vmware3 port - and I find
all kinds of tidbits all over the web about little things that need to
be done to get it to work. The information sometimes covers version
2.0,
On Thu, Sep 30, 2004 at 08:39:16AM -0500, Damon Butler wrote:
I recompiled my kernel, including the options EXT2FS option line. No
problem. After rebooting, I was able to successfully mount my linux
drive thusly:
mount -t ext2fs /dev/ad0s1 /linux
I transferred some files and was
Hello all,
Is there an easy way to install mod_php5 so that it
has GD and MySQL support? There used to be a graphical
menu that came up for these options, but it is no
longer there.
Any help is appreciated.
Thanks,
Ron Clark
__
Do
On Thu, Sep 30, 2004 at 10:12:19AM -0300, [EMAIL PROTECTED] wrote:
My question is in the subject.
If you search in port collection you will see: sendmail and sendmail-sasl.
sendmail-sasl contains only Makefile, I supouse that it compile the
sendmail port with SASL paramether and others.
How I response to a question?
If you mean how do you respond to a question that has been posted to
the FreeBSD questions, just reply to the question.
Do a group reply or reply to all or something that makes your
reply go back to the list ([EMAIL PROTECTED]) as well as the
original poster.
As
On Thu, Sep 30, 2004 at 07:46:11AM -0700, Ronnie Clark wrote:
Is there an easy way to install mod_php5 so that it
has GD and MySQL support? There used to be a graphical
menu that came up for these options, but it is no
longer there.
Any help is appreciated.
Yet another person who has
Ronnie Clark wrote:
Hello all,
Is there an easy way to install mod_php5 so that it
has GD and MySQL support? There used to be a graphical
menu that came up for these options, but it is no
longer there.
Any help is appreciated.
Thanks,
Ron Clark
__
Do you
It was said:
I wan't to access my pc at work from home through
freebsd's sshd. Is it possible?, knowing that it
doesn't have a public ip address? That workstation of
mine is only gaining internet access through LAN
servers and routers. Will it help if I know the
gateway ip where my workstation
I've managed to get the source and kernel out of sync (I blame a
confusion between make world and make buildworld). Now in trying to
install a port, I get Segmentation Fault - Core dumped when it gets
to the install process.
I could understand ps core dumping, but install? That's practically
I have been running a IPFW firewall on FreeBSD 4.10 for a few weeks
now. For some reason a few connection attempts are showing up on the
console rather than going to the log file. I can't seem to figure out
why. Any ideas?
I have tried adding the 'log' key word to every deny statement in my
IPFW
stheg olloydson wrote:
It was said:
I wan't to access my pc at work from home through
freebsd's sshd. Is it possible?, knowing that it
doesn't have a public ip address? That workstation of
mine is only gaining internet access through LAN
servers and routers. Will it help if I know the
gateway ip
On Thu, 30 Sep 2004 06:15 pm, ict technician wrote:
I have a broken fs dump I need to fix. Is there a diagnostic/repair tool I
can use? I know about restore -N.
No I didn't verify, and yes that was a mistake
Dump was taken on 4.10. Restoring on 5.3BETA, although I can change that.
A
Does anybody knows to compile FreeBSD with HAVE_INT64_TIMESTAMP?
Thank you
-
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
___
[EMAIL PROTECTED] mailing list
In a message dated 9/30/04 12:03:05 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Perhaps at this point you should go and do that, and avoid yourself
any further embarrassment.
I have read it, and I don't equate might be some regressions in performance
to
mean more than twice as slow. I
Norm Vilmer wrote:
I have been running a IPFW firewall on FreeBSD 4.10 for a few weeks
now. For some reason a few connection attempts are showing up on the
console rather than going to the log file. I can't seem to figure out
why. Any ideas?
I have tried adding the 'log' key word to every deny
It was said:
Obviously, if you can ssh in, so can anyone else. Be sure you use a
_very_ good password.
Would using a public/private key not be better? Any password would
still
be guessable.
Jim Mozley
Hello,
Most certainly! I was taking into account the OP's relative newness to
the unix
Hi
i just updated from FreeBSD 5.3-BETA3 to BETA6 unfortunately I'm having
some problems now, during boot I see this:
Sep 30 17:04:00 cakebox mountd[357]: can't register UDP RPCMNT_VER1 service
Sep 30 17:04:00 cakebox mountd[357]: can't register UDP RPCMNT_VER3 service
Sep 30 17:04:00 cakebox
[please honour Mail-Followup-To:, not subscribed]
Hi,
For some unknow cause my 5.3-BETA6 workstation (calvin) cannot lock
files over my NFS mounts to my 4.10 server (grummit). I've been all
afternoon trying to sort it out with no luck.
Portmapper and rpc.lockd are running on the server:
[EMAIL
Michael G. Goodell wrote:
Which release of FreeBSD is best for a production environment? I am aware of
the different branches of development: CURRENT, STABLE, RELEASE and I
*think* I understand the meaning of each from what I have read. Perhaps not
since I am writing this question! But, what I
On Thu, Sep 30, 2004 at 01:08:16PM -0400, [EMAIL PROTECTED] wrote:
In a message dated 9/30/04 12:03:05 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Perhaps at this point you should go and do that, and avoid yourself
any further embarrassment.
I have read it, and I don't equate might
On Thu, Sep 30, 2004 at 09:31:27AM -0700, D S wrote:
Does anybody knows to compile FreeBSD with HAVE_INT64_TIMESTAMP?
What on earth is that? :)
Kris
pgpT0ljJVPKCg.pgp
Description: PGP signature
Well... you can't get much newer to BSD than me. So, most likely I have no
place in this thread at all (please be gentle). And I certainly do not
want to get in the middle of something that appears to be on the virge of
becoming personal...
But
I was experiencing very VERY poor
On Thu, Sep 30, 2004 at 01:55:29PM -0500, Eric Schuele wrote:
Well... you can't get much newer to BSD than me. So, most likely I have no
place in this thread at all (please be gentle). And I certainly do not
want to get in the middle of something that appears to be on the virge of
Hi,
I'm counting traffic with ipfw and shell scripts. Is there a way to use
more than 32-bit numbers in shell arithmetic?
Regards,
Andrew P.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
I am trying to install a all in one lexmark printer onto my computer,
everything is correctly plugged in but the computer just cannot detect it. I know
that it is not a problem with the installation disk or printer. Ithink that it
may be a problem with my computer system.
thanks Ieshia
On Thursday, September 30, 2004
stheg olloydson [EMAIL PROTECTED]
spoke as if he was talking about me.
snip
Most certainly! I was taking into account the OP's relative newness to
the unix world. While it may seem condescending, I find newer users
tend to get overwhelmed when more
Kris Kennaway [EMAIL PROTECTED] wrote:
On Thu, Sep 30, 2004 at 01:55:29PM -0500, Eric Schuele wrote:
Well... you can't get much newer to BSD than me. So, most likely I have no
place in this thread at all (please be gentle). And I certainly do not
want to get in the middle of something
At 9:31 AM -0700 9/30/04, D S wrote:
Does anybody knows to compile FreeBSD with HAVE_INT64_TIMESTAMP?
Well, the simple answer would be Yes, it is easy to compile FreeBSD
with that variable defined.
However, the more useful answer would be to point out There is
nothing in the system which
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 30 September 2004 08:03, bsdfsse wrote:
For example, I have been trying to install the vmware3 port - and I find
all kinds of tidbits all over the web about little things that need to
be done to get it to work. The information
In the last episode (Sep 30), Andrew said:
I'm counting traffic with ipfw and shell scripts. Is there a way to
use more than 32-bit numbers in shell arithmetic?
POSIX only requires signed long support in the shell, but FreeBSD's
expr command has a -e flag that will let it do 64-bit math:
$
I'm new to FreeBSD, maybe I am missing something obvious?
You probably missed the pkg-message display. In your terminal session, simply
scroll back a view lines after the install target has been completed or type
'cat /usr/ports/emulators/vmware3/pkg-message' to view it again.
Indeed, I was
I'm a newbie who is trying to install a recent release of firefox under
version 4.9 of FreeBSD. I downloaded the installer (for linux since
there doesn't appear to be a FreeBSD version, yet) from Mozilla, but
when I try to execute it, I get the message error while loading shared
libraries:
Huajian Luo wrote:
hi,guys
I installed fetchyahoo and when I run fetchyahoo
It told me
Logging in securely via SSL as
Failed: Couldn't get challenge to log in, Try again
later,
any comments on this?
Thanks in advance!!!
I remember to have read that they changed their login
I'm a newbie who is trying to install a recent release of firefox
under
version 4.9 of FreeBSD. I downloaded the installer (for linux since
there doesn't appear to be a FreeBSD version, yet) from Mozilla, but
when I try to execute it, I get the message error while loading
shared
libraries:
-Original Message-
From: Bill Schmitt (SW) [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 30, 2004 2:53 PM
To: [EMAIL PROTECTED]
Subject: firefox help
I'm a newbie who is trying to install a recent release of
firefox under
version 4.9 of FreeBSD. I downloaded the
Dan Nelson wrote:
In the last episode (Sep 30), Andrew said:
I'm counting traffic with ipfw and shell scripts. Is there a way to
use more than 32-bit numbers in shell arithmetic?
POSIX only requires signed long support in the shell, but FreeBSD's
expr command has a -e flag that will let it
pid 19543 (cc1), uid 0: exited on signal 4 (core dumped)
pid 20066 (cc1), uid 0: exited on signal 4 (core dumped)
pid 21680 (cc1), uid 0: exited on signal 4 (core dumped)
hello, suddently on my system happens that any running program
crashes with signal 4 or signal 10 and dumps a core.
This
On Thursday 30 September 2004 21:51, bsdfsse wrote:
I'm new to FreeBSD, maybe I am missing something obvious?
You probably missed the pkg-message display. In your terminal session,
simply scroll back a view lines after the install target has been
completed or type 'cat
Hello,
I am trying to get Liveice up and running on a FBSD 5.2.1 machine.
So far everything went well but I ran into a script that uses wishx.
I googled it and found it's part of the Tk toolkit for TCL, so I
installed that (tk-8.2.3_2 and tk-8.3.5_2) but still no wishx.
I have installed wish8.3
Hi all...I'm having a conceptual problem I can't get around and
was hoping someone can change my focus here. I've been backing up
roughly 6-8 million small files (roughly 2-4k each) using dump, but
restores take forever due to the huge number of files and directories.
Luckily, I haven't had
I really believe the choose would depend on your requirements and your
experience. If you are new to open source Unix-like environment then you
should not use either in version in a production environment unless you can
afford the cost associated with learning a new system. Do not under
In the last episode (Oct 01), Andrew said:
Thanks! I haven't thought about using expr.
How come that my expr(1) manpage has nothing to say about -e option?
In fact my expr(1) does not accept it. I have FreeBSD 4.10. I've just
looked into a current manpage from www.freebsd.org, and it says
I would recommend setting up dual boot system with FreeBSD and Linux see which
system you like best or suites your needs the best. Get your feet wet first,
jump in when you feel comfortable. There are a couple ways of creating such a
system, buy a new hard drive or crate a partition on you
Brian McCann wrote:
Hi all...I'm having a conceptual problem I can't get around and
was hoping someone can change my focus here. I've been backing up
roughly 6-8 million small files (roughly 2-4k each) using dump, but
restores take forever due to the huge number of files and directories.
I'm having trouble installing firefox on freebsd-4.10. When i try to install it it
gives me this error:
/usr/libexec/elf/ld: cannot find -lXcursor
gmake[2]: *** [libgtkxtbin.so] Error 1
gmake[2]: Leaving Directory '/usr/ports/www/firefox/work/mozilla
/widget/src/gtkxtbin'
gmake[1]: *** [tier_9]
On Thu, Sep 30, 2004 at 04:45:02PM +0800, wrote:
so what is the difference between 2?i think , ule is not so good as
they told me ,so slow.
One's a scheduler, one's a thread system. Apples, oranges.
Kris
pgpNLJ2OnQq6a.pgp
Description: PGP signature
In a message dated 9/30/04 2:04:35 PM Eastern Daylight Time, [EMAIL PROTECTED]
writes:
Which release of FreeBSD is best for a production environment? I am aware of
the different branches of development: CURRENT, STABLE, RELEASE and I
*think* I understand the meaning of each from what I have
Stupid question maybe, but are there any plans on putting the comments back
into Lint? I realize that these may be documented within the online
handbook, however, for those of us, who at times are required to go to a
remote site, and the net link has failed, needing to recompile something
without
On Thu, Sep 30, 2004 at 04:22:27PM -0500, Micheal Patterson wrote:
Stupid question maybe, but are there any plans on putting the comments back
into Lint? I realize that these may be documented within the online
handbook, however, for those of us, who at times are required to go to a
remote
Hello freebsd-questions,
Problem
free.A --- catalist (with multy-vlan)
|
|
free.B
ping -S free.A -s 1468 free.B
All ok
ping -S free.A -s 1469 free.B
All ok
Packet droped ... as i found because mtu of tagged packet is smaller
ifconfig vlan10 mtu 1460 dose
From the handbook:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-confi
g.html
In FreeBSD 5.X and later versions you can still generate a buildable LINT
file by typing:
# cd /usr/src/sys/i386/conf make LINT
Kevin Glick
ITS Manager
[EMAIL PROTECTED]
Sterling Business
Mark Jayson Alvarez wrote:
Hi,
I wan't to access my pc at work from home through
freebsd's sshd. Is it possible?, knowing that it
doesn't have a public ip address? That workstation of
mine is only gaining internet access through LAN
servers and routers. Will it help if I know the
gateway
I installed FreeBSD 5.3 Beta 6 today on an Intel s875wp1-e server board. I
enabled RAID on the ICH5 SATA ports. Using its BIOS, I built a 2 drive
mirror.
FreeBSD saw both the native disks (ad4 and ad6). I installed to ad4.
I ran atacontrol create RAID1 ad4 ad6. It said ar0 was created.
Now I'm
- Original Message -
From: Kris Kennaway [EMAIL PROTECTED]
To: Micheal Patterson [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, September 30, 2004 4:25 PM
Subject: Re: FreeBSD 5.x and Lint
On Thu, Sep 30, 2004 at 04:22:27PM -0500, Micheal Patterson wrote:
Stupid question
- Original Message -
From: [EMAIL PROTECTED]
To: 'Kris Kennaway' [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, September 30, 2004 4:29 PM
Subject: RE: FreeBSD 5.x and Lint
From the handbook:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-confi
On Thu, Sep 30, 2004 at 04:58:29PM -0500, Micheal Patterson wrote:
- Original Message -
From: Kris Kennaway [EMAIL PROTECTED]
To: Micheal Patterson [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, September 30, 2004 4:25 PM
Subject: Re: FreeBSD 5.x and Lint
On Thu, Sep
That's the hard part. The Secondary MX'ing part is fairly easy. All
you do is get your friend to add an MX record to the DNS
'yourfriend.com' zone listing your server as a high numbered MXer:
$ORIGIN yourfriend.com.
@ INMX 0 smtp.yourfriend.com.
Hello freebsd-questions,
Problem
free.A --- catalist (with multy-vlan)
|
|
free.B
ping -S free.A -s 1468 free.B
All ok
ping -S free.A -s 1469 free.B
All ok
Packet droped ... as i found because mtu of tagged packet is smaller
ifconfig vlan10 mtu 1460 dose
As I understand the man pages, ukbd/ums/uscanner are
independant of uhid. Is this correct?
Robert Huff
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
While running an mpirun job on my dual-processor SMP system
(FreeBSD 4-STABLE from August 28), my program (initiated with the command
line 'mpirun -np 2 ../sphagr') periodically dies, leaving a process that I
can't kill -9. Here's the top:
216 root 2 0 166M 113M select 1
I've been trying all day to get pam_ldap to authenticate an ssh session
against Active Directory. I thought that I had found the perfect HOWTO
(read: one that didn't require nss_ldap), but its instructions didn't seem
to get it working on my system.
I've read that can authenticate to AD with
On Thu, 2004-09-30 at 13:59 -0700, Richard Lynch wrote:
If it's the latter, you could maybe get best performance from something
like Subversion (a CVS derivative).
Just a minor correction: Subversion is *not* a derivative of CVS. It
does not share code with CVS, it is not based on the same
On Thu, 30 Sep 2004 15:53:18 -0400
Bill Schmitt (SW) [EMAIL PROTECTED] wrote:
I'm a newbie who is trying to install a recent release of firefox
under version 4.9 of FreeBSD. I downloaded the installer (for linux
since there doesn't appear to be a FreeBSD version, yet) from
Mozilla, but when
I want to upgrade OpenSSH/OpenSSL and I only want to have to use the
ports tree to do this. What is the best way to do this? If possible
I would like to over write my existing base installations of those two
packages, or delete the base install ones if that's possible
(preferably not by hand).
Im running 4.10 right now and even since 4.9 and lower i have had this problem.
Im running 1.4.6 right now... the latest as of last night form ports. (9/29/2004)
Basicly what is happening is it downloads 1 email every 2 minutes and 10 seconds, just
an FYI im running 3Mbit cable and if i download
It was said (with broken MS formatting):
X-Mailer: Microsoft Outlook Express 6.00.2900.2180
Im running 4.10 right now and even since 4.9 and lower i have had this
=
problem.
Im running 1.4.6 right now... the latest as of last night form ports.
=
(9/29/2004)
Basicly what is happening is it
Hello all,
I have been trying for some time to update a system
via makeworld. The
system would always error out and not complete its
update. Someone from
the list suggested that I cvsup my system, which I did
multiple time to
no avail. This morning, I tried again. Still errors
out. I even went
In the last episode (Sep 30), Jason Barnes said:
While running an mpirun job on my dual-processor SMP system
(FreeBSD 4-STABLE from August 28), my program (initiated with the
command line 'mpirun -np 2 ../sphagr') periodically dies, leaving a
process that I can't kill -9. Here's the
--- Simon Barner [EMAIL PROTECTED] wrote:
Huajian Luo wrote:
hi,guys
I installed fetchyahoo and when I run fetchyahoo
It told me
Logging in securely via SSL as
Failed: Couldn't get challenge to log in, Try
again
later,
any comments on this?
Thanks in advance!!!
Hi everyone,
I'm experiencing some problems getting my digital camera (Sony Cybershot
DSC-T1) to
interface with the USB system under FreeBSD RELENG_5.
I've tried setting my camera into normal mode and tried to use it as a umass
device, but no /dev/da* device is created so there's nothing for me
Jason Barnes wrote:
While running an mpirun job on my dual-processor SMP system
(FreeBSD 4-STABLE from August 28), my program (initiated with the command
line 'mpirun -np 2 ../sphagr') periodically dies, leaving a process that I
can't kill -9. Here's the top:
The 550 process I
has anyone managed to test or use Intel® ICH5-R SATA controllers?
(RAID 0 and 1)??
i see they are unsupported, but do they work anyhow?
Intel® ICH5-R SATA controllers
--
/carmoda
/carmoda at gmail dot com
/carmoda at jabber dot org
/wuh wuh wuh carmoda dot com
Did you cvsup with src-all? If not then please do so. Also can we have
a look at /etc/make.conf?
On Thu, 30 Sep 2004 17:53:19 -0700 (PDT), Ronnie Clark
[EMAIL PROTECTED] wrote:
Hello all,
I have been trying for some time to update a system
via makeworld. The
system would always error out
1 - 100 of 107 matches
Mail list logo
