I'm finding it especially interesting that /etc/make.conf,
which to judge from its location is part of the base, depends
on a setting from something in the /usr/ports tree.
Well, actually it doesn't. What gives you this impression?
Paul Schmehl reported where LOCALBASE is
Hello. I have a Xeon system with 2 CPU's installed (dual-cores). Under
FreeBSD 6.2, a systat reported 4 CPUs in use and so did dmesg.
Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, but systat is only
reporting 2 CPUs (CPU 0 and CPU 2).
How do I enabled the second cores on the CPU's or are
Tigger wrote:
Hello. I have a Xeon system with 2 CPU's installed (dual-cores). Under
FreeBSD 6.2, a systat reported 4 CPUs in use and so did dmesg.
Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, but systat is only
reporting 2 CPUs (CPU 0 and CPU 2).
How do I enabled the second cores on
That's a new revision of the C3 which supports SSE: 'c3-2' is a better
CPUTYPE for it.
*sighs* Oh well. Guess its time to rebuild world again. =)
Thanks for the info Bruce.
___
freebsd-questions@freebsd.org mailing list
Yes. Not many use VIA cpu's, so I think it would help a lot if you'd do a
send-pr. Include a full dmesg so the CPU flags can be seen. The default on
FreeBSD is to compile with -O2 now, so either cc should disable the
specific
optimization for which there is no matching CPU instruction
On Sun, 24 Feb 2008 12:46:23 +0100
Dominic Fandrey [EMAIL PROTECTED] wrote:
Tigger wrote:
Hello. I have a Xeon system with 2 CPU's installed (dual-cores).
Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did
dmesg.
Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, but systat
Hey guys, i'm running 6.3-R with (i think) userland ppp to connect to my
ADSL provider over PPPoE.
I build a number of graphs(mrtg) for system stats and i am noticing that
under heavy load on my ppp connection, that is sustained 150KB/s for an
hour or so my cpu usage, based on my graph, hovers
I expected RELENG_7 to have newer files than RELENG_7_0 as the latter
tracks a release whilst the former tracks CURRENT/STABLE whichever it
currently is.
However I noticed 2 things.
1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE whilst RELENG_7 shows PRERELEASE.
2 - RELENG_7_0 has higher version
On Sun, Feb 24, 2008 at 01:16:04PM +, Chris wrote:
I expected RELENG_7 to have newer files than RELENG_7_0 as the latter
tracks a release whilst the former tracks CURRENT/STABLE whichever it
currently is.
However I noticed 2 things.
1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Daniel Gerzo wrote:
| Hello people,
|
| I'm trying to set up a gmirror on two slices, but I am stuck
| somewhere. I am unable to find out what is wrong. Here's what I have
| done so far:
|
| I have 2 disks in the box. I have created 2 slices on
Hello,
I am unable to boot (and much less install) FreeBSD on a Dell Dimension3100
computer, apparently due to some usb problems.
here's the error message
snip
sio0: configured irq 4 not in bitmap of probed irqs
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs
Hi,
I've updated and upgraded the ports tree to the . branch
but serveral of ports doesn't compile or are completly absent
on the repositories.
What can I do?, I need the system working.
I'm using 6.3-STABLE.
-8--8--8--8--8-
pkg_create: make_dist: tar
Hello, i am trying to connect to the vpn at university from home.
I have made a new kernel with what i think (thought) was needed for ipsec
from reading the handbook, my kernel file looks like:
include GENERIC
ident
Tigger wrote:
On Sun, 24 Feb 2008 12:46:23 +0100
Dominic Fandrey [EMAIL PROTECTED] wrote:
Tigger wrote:
Hello. I have a Xeon system with 2 CPU's installed (dual-cores).
Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did
dmesg.
Under FreeBSD 6.3, dmesg is reporting the 4 CPUs,
Hi all,
I have a FreeBSD 4.11 (I know its outdated but I don't have an
option) box which is behaving very weirdly. After about a day and a half it
starts to drop packets - about 6-10% of pings at least, and tcp traffic
becomes unreliable etc.
I have swapped out the network cards, the
Okay, so here goes:
SYNOPSIS
Wireless network gets detected, but has no carrier. So I can't connect.
PROMPT
All prompts are indicated as $ to avoid confusion with #-comment lines, but
in reality most things are done by root.
THE NETWORK
SSID: SpeedTouch1EC5E8
radio type: 11g
security type:
Hardware issues come to mind. Do you have a dmesg?
SC
On Sun, Feb 24, 2008 at 9:27 AM, Dave Raven [EMAIL PROTECTED] wrote:
Hi all,
I have a FreeBSD 4.11 (I know its outdated but I don't have an
option) box which is behaving very weirdly. After about a day and a half it
starts to
Download sources for software you need, and compile it manualy.
but firstly i`d try to delete ports directory, and fetch ports again.
Daniel Molina Wegener пишет:
Hi,
I've updated and upgraded the ports tree to the . branch
but serveral of ports doesn't compile or are completly absent
on the
Hi,
Its interesting you'd say that I'd virtually ruled it out given that
it takes over a day to start? What I do see sometimes is a message warning
me that its limiting open port RST responses - the unit is under a
reasonable amount of load though (but not overloaded). The strange thing is
Redirect - freebsd-mobile, cc Ben
Ref:
http://lists.freebsd.org/pipermail/freebsd-current/2007-November/080653.html
On Sunday 24 February 2008 16:50:47 Alphons Fonz van Werven wrote:
Okay, so here goes:
SYNOPSIS
Wireless network gets detected, but has no carrier. So I can't connect.
All:
There was a patch to libdisk in late 2005 that added geom(4) support to
libdisk. I'm noticing that Disk_Names() doesn't grab contact/ or mirror/
volumes, though. It still depends on kern.disks.
Should I add my gmirror/gconcat probing code to /usr.sbin/
sysinstall/devices.c directly,
Hello,
After having problems with DMA errors on my old PATA 200GB disks
because of a faulty harddisk, I switched to SATA 500GB disks. I used
fdisk to create slices and newfs them, then copied everything using
dump restore to my new harddisks.
Now I have problems running into the next
Hi,
I am running dhcpd on my FreeBSD machine and have 2 clients that requests an
IP address. The one client is connected directly to the same network as the
BSD box, the other client is connected via a bridge on the first client. I
have a section in my /usr/local/etc/dhcpd.conf to assign a
BSD box, the other client is connected via a bridge on the first client. I
have a section in my /usr/local/etc/dhcpd.conf to assign a specific IP to
client #1:
host myhost {
hardware ethernet xx:xx:xx:xx:xx:xx;
fixed address 192.168.1.16;
}
The problem is, both client #1 and #2 get assigned
-Original Message-
From: Wojciech Puchar [mailto:[EMAIL PROTECTED]
Sent: 24 February 2008 08:56 PM
To: Jaco le Roux
Cc: freebsd-questions@freebsd.org
Subject: Re: DHCP Server
BSD box, the other client is connected via a bridge on the first client.
I
have a section in my
1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE whilst RELENG_7 shows
PRERELEASE.
Yes, it is supposed to be that way. RELENG_7 will continue to show
-PRERELEASE until after 7.0-RELEASE is out, at which point it will switch to
show -STABLE.
That is my point the 7.0 branch is marked as
On Fri, 2008-02-22 at 08:25 -0500, Robert Huff wrote:
Da Rock writes:
Mercedes? :)
Fits the first, dunno about the third. Certainly not the second --
Benz are some of the best-engineered and built cars in existence.
Maybe BMW, aka Bunch-a Money Wasted or Bite My
After having a few problems with Fbsd 6.3 stable I decided to try 7.0
which impressed me right away because I noticed right away that it
performed better on my computer. Now I decided to build my own custom
kernel and after running the first command:
%buildkernel KERNCONF=mykernel
I get
On Sat, Feb 23, 2008 at 01:34:54PM +0100, Andrea Venturoli wrote:
This used to work fine with 6.2, with the default route set up by the
DHCP servers.
After I upgraded to 6.3, I get no default route anymore. This is the
relevant part of my logfile:
As of FreeBSD 6.3 dhclient supports
On Mon, 25 Feb 2008 00:00:40 +0100
Erik Trulsson [EMAIL PROTECTED] wrote:
On Sun, Feb 24, 2008 at 05:34:20PM -0500, E. J. Cerejo wrote:
After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which
impressed me right away because I noticed right away that it performed
add device scbus or remove vpo
On Sun, 24 Feb 2008, E. J. Cerejo wrote:
After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which
impressed me right away because I noticed right away that it performed better
on my computer. Now I decided to build my own custom kernel and
On Sun, Feb 24, 2008 at 05:34:20PM -0500, E. J. Cerejo wrote:
After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which
impressed me right away because I noticed right away that it performed
better on my computer. Now I decided to build my own custom kernel and
after
Do we have the following perl modules in ports?
Tk
Encode
Encode::Unicode (Not sure if this is seprate from the Encode module)
Encode::Guess
HTML::Parser
LWP::Simple
I'm trying to understand how gtk20 and other graphic ports
--On February 24, 2008 3:30:18 PM -0800 Gary Kline [EMAIL PROTECTED]
wrote:
Do we have the following perl modules in ports?
Tk
Encode
Encode::Unicode (Not sure if this is seprate from the Encode
module) Encode::Guess
HTML::Parser
Hi,
Both in 6.x and now in 7 I've had issues with the sound volume in Totem.
When I use vlc then nothing's wrong, but in Totem even with all the
different available volumes turned to the max, I get much less
volume/sound. Previously (6.x on a different machine) I could go into
mplayer and
On Sun, 24 Feb 2008 18:11:00 -0600
Paul Schmehl [EMAIL PROTECTED] wrote:
--On February 24, 2008 3:30:18 PM -0800 Gary Kline
[EMAIL PROTECTED] wrote:
Do we have the following perl modules in ports?
Tk
Encode
Encode::Unicode (Not sure if this is seprate
On 24/02/2008, Erik Trulsson [EMAIL PROTECTED] wrote:
I thought it over and understand what you saying now, they branched
off 7.0R at the start of the release process and from that point
development between that and the stable branch wont necessarily be
synched. My only wonder left now is that
Hi,
You just recieved an electronic card!
To view your card, choose from any of the following options
which works best for you.
Method 1
Just click on the following Internet address (if that doesn't work for
you, copy paste the address onto your
Hello,
something goes wrong while using adduser with bcrypt password hashes on FreeBSD
7.0-RC3:
user0:$2a$04$xYpywjtq..p1dnhRzopxTA03kej/n.6zzH1IPnFnq:1001:1001::0:0:User
:/home/user0:/bin/sh
user1:$2a$04$x8Oz2mIk..ic9QqpzeeBC/8UkJkon5pW5N5TfwDAG:1002:1002::0:0:User
ME ESTA FALLANDO EL CONTROLADOR DE DE LA RED INALAMBIRCA, NO LO TENGO COMO LO
PUEDO CONSEGUIR.
FCO
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.
On Sat, Feb 23, 2008 at 01:09:06PM -0600, W. D. wrote:
Compiled, built kernel, and world per:
http://www.f.csce.kyushu-u.ac.jp/~shigeaki/software/freebsd-nfe.html
Still getting timeout errors. Seems like more of them
with this nfe driver.
FreeBSD 6.2, Asus M2NPV-VM, nVidia
Hi,
If volume in mplayer is high, then can you give us what is the -ao you
are using ? probably that could be a clue ...
On Mon, 2008-02-25 at 01:12 +0100, Nikolaj Thygesen wrote:
Hi,
Both in 6.x and now in 7 I've had issues with the sound volume in Totem.
When I use vlc then nothing's
Hello, John Nielsen!
On Thu, Feb 21, 2008 at 10:56:59AM -0500
[EMAIL PROTECTED] wrote about Re: wi0 (4.11) = rum0 (7.0):
On Thursday 21 February 2008 02:46:09 am Lystopad Oleksandr wrote:
Hi!
I have two FreeBSD boxes. One with 4.11 and wi0 device, and another
with 7.0-PRE with rum0
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Predrag
Punosevac
Sent: Friday, February 22, 2008 1:09 AM
To: Ted Mittelstaedt; [EMAIL PROTECTED]
Subject: Re: DJ500 dead after = 16 years.
Ted Mittelstaedt wrote:
-Original Message-
On Mon, Feb 25, 2008 at 01:10:04AM +, Chris wrote:
On 24/02/2008, Erik Trulsson [EMAIL PROTECTED] wrote:
I thought it over and understand what you saying now, they branched
off 7.0R at the start of the release process and from that point
development between that and the stable branch
45 matches
Mail list logo
