On Mon, 2008-04-14 at 14:43 +0800, Ruel Luchavez wrote:
> Hello,
>
> I hope some one will me on my problem.
> My friends has and existing DHCP server and squid proxy server running both
> in freebsd.We purchased a new desktop PC, we gave it a permanent IP using
> the DHCP server and we edit the c
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
but freeze on begin chanel tunin...
How to test tuner and drivers works or not.
--
With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED]
How to reload the dhcpd? what would be the command fo it?
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar <
[EMAIL PROTECTED]> wrote:
> add this at the bottom
> >
> > host test {
> > hardware ethernet 00:1d:27:64:e1:af; [this is the physical address of
> > new
> > PC]
> > fixe
How to reload the dhcpd? what would be the command fo it?
/usr/local/etc/rc.d/isc-dhcpd restart
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar <
[EMAIL PROTECTED]> wrote:
add this at the bottom
host test {
hardware ethernet 00:1d:27:64:e1:af; [this is the physical addres
>How to reload the dhcpd? what would be the command fo it?
>Best regards..
On the freebsd server use:
/usr/local/etc/rc.d/isc-dhcpd restart
On a windows box do :
Start --> run
Type cmd klik ok
Then you'll get a dos box
ipconfig /release
This releases the ip adres
ipconfig /renew
try to
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
> Hi, All.
>
> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
> but freeze on begin chanel tunin...
>
> How to test tuner and drivers works or n
On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote:
> Erich Dollansky writes:
>
> > this is an English speaking list.
>
>
> Says who?
>
The handbook.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/free
Hallo,
How to restart the squid proxy server in freebsd?
Thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thanks Johan & Puchar, your advise is very effective.
again thank you..
On Mon, Apr 14, 2008 at 3:36 PM, Johan Hendriks <[EMAIL PROTECTED]> wrote:
>
>
> >How to reload the dhcpd? what would be the command fo it?
>
> >Best regards..
>
> On the freebsd server use:
> /usr/local/etc/rc.d/isc-dhcpd
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
Ruel Luchavez wrote:
> Hi,
>
> I have BIND DNS Server in my freebsd, i keep on searching in google on how
> to restart it?
> is there a command to restart it like the squid and dhcp? or there is no
> command for it?
That is somewhat different to
>Hallo,
>How to restart the squid proxy server in freebsd?
>Thanks...
Use the following command
/usr/local/etc/rc.d/squid restart
Regards,
Johan Hendriks
Double L Automatisering
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.o
> I have BIND DNS Server in my freebsd, i keep on searching in google on
> how
> to restart it?
> is there a command to restart it like the squid and dhcp? or there is
> no
> command for it?
You might like to try
# rndc reload
Cheers
> Thanks in advanced..
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Andy
> Christianson
> Sent: Thursday, April 10, 2008 6:35 AM
> To: freebsd-questions@freebsd.org
> Subject: Poweredge 1950 IPMI
>
>
> A while back I posted about reading the CPU temperature on a Dell
>
On Monday 14 April 2008 11:02:43 Ruel Luchavez wrote:
> I have BIND DNS Server in my freebsd, i keep on searching in google on how
> to restart it?
> is there a command to restart it like the squid and dhcp? or there is no
> command for it?
If you start reading here:
http://www.freebsd.org/doc/en
Hi,
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
is there a command to restart it like the squid and dhcp? or there is no
command for it?
Thanks in advanced..
___
freebsd-questions@freebsd.org mailing list
ht
lysergius2001 wrote:
Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
ath0 and echi0. Never saw this on 6.3??? Any suggestions?
Just another contribution to the collection of interrupt storms may
On 14.04.2008, Da Rock wrote:
> On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
>> Hi, All.
>>
>> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
>> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
>> but freeze on begin chanel tunin...
>>
>> Ho
> Subject: Re: Interrupt storm with 7.0
> On Sunday 13 April 2008 14:41:51 lysergius2001 wrote:
>
> > Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
> > now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
> > ath0 and echi0. Never saw this on 6.3?
On Monday 14 April 2008 11:36:43 Jan Henrik Sylvester wrote:
> lysergius2001 wrote:
> > Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
> > now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
> > ath0 and echi0. Never saw this on 6.3??? Any suggestio
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
/etc/rc.d/named restart
is there a command to restart it like the squid and dhcp? or there is no
command for it?
Thanks in advanced..
___
freebsd-questions@fr
On Mon, 2008-04-14 at 02:07 -0700, Ted Mittelstaedt wrote:
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of Andy
> > Christianson
> > Sent: Thursday, April 10, 2008 6:35 AM
> > To: freebsd-questions@freebsd.org
> > Subject: Poweredge 1950 IPMI
>
I used the patches and documents from qmail.jms1.net and built my own
qmail, and it works well. I think a port that tracks qmail + jms1's
current combined patch set would be well received.
BTW, I copied the maintainer of the qmail port on my earlier message,
and it eventually bounced:
[EMA
Hi all,
(This may actually be a question for the dtach people).
I've recently been using dtach (basically the detach function of
screen) over SSH to instruct my freeBSD machine to perform long tasks
even after I disconnect from it. It's worked great: I run SSH and
connect to my box, execute dtac
Written by Gaëtan Podevijn on 04/13/08 08:14>>
> Hello,
>
> I'm trying to configure my Acer Aspire 5024wmli wireless card (pciconf
> -lv told me device: BCM43XX Broadcom 802.11b/g) but without any success.
>
> I use ndis with windows drivers and it is correctly loaded:
>
> kldstat
>
> Id Refs A
Edward Ruggeri wrote:
Hi all,
(This may actually be a question for the dtach people).
I've recently been using dtach (basically the detach function of
screen) over SSH to instruct my freeBSD machine to perform long tasks
even after I disconnect from it. It's worked great: I run SSH and
connect
Jeff Dickens wrote:
> I used the patches and documents from qmail.jms1.net and built my own
> qmail, and it works well. I think a port that tracks qmail + jms1's
> current combined patch set would be well received.
>
For what is worth the mail/qmail-tls port says it supports smtp-auth. I
dont us
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine, and
have been relying on a (non-computer-literate) colleague with
access to its console server to try and help.
Af
At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine, and
have been relying on a (non-computer-literate) colleague with
On Mon, Apr 14, 2008 at 08:29:43AM -0400, Andy Christianson wrote:
> > > So, any ideas on how to read the CPU temperature from this machine?
> > > Thanks in advance for any advice.
> > >
> >
> > My experience is that it's more important to be able to read
> > fan rpm on the CPU heatsink. If fan
On Sun, Apr 13, 2008 at 01:02:45PM -0600, Eric wrote:
> hello,
>
> does anyone know what I can do to fix the following problem? Every time
> my FreeBSd 6.2 machine reboots, none of the scripts in the
> /usr/local/etc/rc.d directory launch the various programs i have defined
> in my rc.conf fi
I have Freebsd 7 Release installed on my laptop and the dhcp client works
unstably with WIRELESS connection. It does not get ip unless the dhcp server
on the router is restarted. I am kind of sure this is the problem with
freebsd as I installed ubuntu and windows xp on the same laptop with no
probl
Jerry McAllister wrote:
to rc.conf i see things getting evaluated, but nothing is launched. this
forces someone to log in locally to the machine and start openssh so i
can get to the box.
Are there startup scripts for these things in rc.d?
Putting something in rc.conf is only setting a flag or
2008/4/14, Seth Brundle <[EMAIL PROTECTED]>:
> 2008/4/14, Christian Walther <[EMAIL PROTECTED]>:
>
> > On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote:
> > > Erich Dollansky writes:
> > >
> > > > this is an English speaking list.
> > >
> > >
> > > Says who?
> > >
> >
>
On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote:
> At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
>
> >I've recently installed FreeBSD 7.0 on a new server. I seem to
> >be unable to log in as root in any way, and I'm not sure why.
> >Furthermore I'm now physically separate from the ma
On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
>
> Edward Ruggeri wrote:
> > Recently, I figured to do this with portupgrade. Now, I don't allow
> > root login, so I log in as a user in the wheel group and use su. Now,
> > as root, I run: dtach -A portupgrade -a. It st
2008/4/14, Christian Walther <[EMAIL PROTECTED]>:
> On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote:
> > Erich Dollansky writes:
> >
> > > this is an English speaking list.
> >
> >
> > Says who?
> >
>
> The handbook.
I'm sorry, I ignored the fact that I sent my initial email
Edward Ruggeri wrote:
On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
Edward Ruggeri wrote:
Recently, I figured to do this with portupgrade. Now, I don't allow
root login, so I log in as a user in the wheel group and use su. Now,
as root, I run: dtach -A portupgrade
On Mon, Apr 14, 2008 at 12:41 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> No. Unless dtach is doing something bizarre I cannot think of a reason
> this would be happening.
>
> Kris
Maybe I simply over-sentimentalized the old days of updating the portsdb.
Sincerely,
-- Ned Ruggeri
_
Em Dom, 2008-04-13 às 04:14 +0300, Giorgos Keramidas escreveu:
> On Sat, 12 Apr 2008 17:20:17 +0200, Michaël Le Barbier <[EMAIL PROTECTED]>
> wrote:
> > Hi folks,
> >
> > a few years ago, I tried to use FreeBSD's make under GNU/Linux, and
> > thanks to `jpd' on c.u.b.f.misc, I managed to build F
On Mon, Apr 14, 2008 at 12:01:22PM -0500, Derek Ragona wrote:
> Jesse Sheidlower wrote:
> >My helper did successfully log in as root over the console,
> >and rebooted the server. However, all of my above problems are
> >still the case: I cannot log in as root over ssh (OK, you
> >addressed this), o
I am trying to build the neccesary files for the stevens/rago APUE.2e book on
FreeBSD 7.0
as instructed i get the source from here: http://www.apuebook.com/src.tar.gz
unzip & untar to:
/home/seamus/apue.2e
cd /home/seamus/apue.2e
amend "Make.defines.freebsd" as instructed so:
"WKDIR=/home/sea
On Mon, Apr 14, 2008 at 10:35:03AM -0400, Jesse Sheidlower wrote:
>
> I've recently installed FreeBSD 7.0 on a new server. I seem to
> be unable to log in as root in any way, and I'm not sure why.
> Furthermore I'm now physically separate from the machine, and
> have been relying on a (non-comput
On Sun, Apr 13, 2008 at 07:18:52PM -0600, Eric wrote:
>
> tomasz dereszynski wrote:
> >Eric wrote:
> >>hello,
> >>
> >>does anyone know what I can do to fix the following problem? Every
> >>time my FreeBSd 6.2 machine reboots, none of the scripts in the
> >>/usr/local/etc/rc.d directory launch t
At 11:30 AM 4/14/2008, Jesse Sheidlower wrote:
On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote:
> At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
>
> >I've recently installed FreeBSD 7.0 on a new server. I seem to
> >be unable to log in as root in any way, and I'm not sure why.
> >Fur
Hello
I came across your details and hope you will not see this as junk mail; if
so, please do accept my apologies.
We at www.uktradestreet.com can offer you a complimentary service in that
we have genuine customers - both commercial and domestic who would need your
services and as such w
On Mon, Apr 14, 2008 at 01:16:45PM -0400, Jerry McAllister wrote:
>
> Well, the two things I would guess are: there is a syntax error in
> adding your regular id to the wheel group and you are typing in the
> root password incorrectly.
In ancient times I had IRIX lock out a user because there wa
Jeremy Messenger <[EMAIL PROTECTED]> wrote: On Sun, 13 Apr 2008 15:56:11 -0500,
Dino Vliet
wrote:
>
>
> Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47
> -0500, Dino Vliet
> wrote:
>
>> Folks,
>>
>> I've tried to upgrade my ports and get the following error from
>> gnome-applets ever
Jeremy Messenger <[EMAIL PROTECTED]> wrote: On Sun, 13 Apr 2008 15:56:11 -0500,
Dino Vliet
wrote:
>
>
> Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47
> -0500, Dino Vliet
> wrote:
>
>> Folks,
>>
>> I've tried to upgrade my ports and get the following error from
>> gnome-applets ever
On Monday 14 April 2008 18:48:58 Brother Seamus wrote:
> I am trying to build the neccesary files for the stevens/rago APUE.2e book
> on FreeBSD 7.0
> I get the following error:
> +
> pracct.c ../lib/libapue.a
> pracct.c: In function 'main':
> pracct.c:3
just a note: same source code makes fine on solaris installation.
I would appreciate if somebody else running freebsd 7.0 could download source
and see if it makes fine on their installation.
Steven's "Advance Programming in the Unix Environment" Source code:
http://www.apuebook.com/src.tar.gz
Frank Shute wrote:
I spotted a couple of things with your rc.conf that could be causing
you trouble:
1) There are a lot of unquoted YES's for enabling services. I don't
know if that could screw thing's up but for form's sake, I'd try quoting
them and rebooting.
2) You seem to have set your sec
Seth Brundle wrote:
(That set aside: I'm deeply impressed by the fact that list members
translated my erraneous posting -- this is VERY friendly and shows the
BSD communities superiority, if I might say so. Thanks again! :)
w00t!!
That's Internet for "Thanks, Erich, and I concur with Seth's pr
On Mon, 14 Apr 2008 13:28:40 -0500, Dino Vliet <[EMAIL PROTECTED]>
wrote:
Ok thanks for the suggestions,
I've started with Yelp but am getting this error when doing a make
install distclean.
[EMAIL PROTECTED] /usr/ports/x11/yelp]# make install distclean
===> Building for yelp-2.22.1
gmak
Eric Zimmerman wrote:
Frank Shute wrote:
I spotted a couple of things with your rc.conf that could be causing
you trouble:
1) There are a lot of unquoted YES's for enabling services. I don't
know if that could screw thing's up but for form's sake, I'd try quoting
them and rebooting.
2) You se
I have a production server running FreeBSD 7.0-RELEASE, and it has
stability issues. The problem is that after a crash, it takes quite a
while to get back up and running. Most of the time is spent doing a file
system check on a 500GB USB drive with a single UFS partition. I noticed
that my var, roo
On Mon, 14 Apr 2008 13:36:18 -0500, Dino Vliet <[EMAIL PROTECTED]>
wrote:
I've continued with the seahorse problem. In /usr/ports/UPDATING I
couldn't find anything regarding seahorse!
The gnome-keyring-manager is in /usr/ports/MOVED for gnome-keyring-manager
-> seahorse. For some reason,
Andy Christianson wrote:
I have a production server running FreeBSD 7.0-RELEASE, and it has
stability issues. The problem is that after a crash, it takes quite a
while to get back up and running. Most of the time is spent doing a file
system check on a 500GB USB drive with a single UFS partition.
Hi Mel,
Thanks for your reply - very insightful - i have beendelving into the c library
files - which is after all why i am readingthis book, though still at the
beginning 8).
On the pracct.c source file I have found it sufficient just to change line 31
from
struct accta
On Fri, 2008-04-11 at 22:13 +0200, Mel wrote:
> On Friday 11 April 2008 16:42:57 Shelby Cain wrote:
> >
> > Why does "factory settings" not include scanning the built-in system
> > library path /usr/lib? From the man page, it would seem that if I truly
> > wanted to remove all runtime information
I'm using the FreeBSD SMB/CIFS layer for authentication to remote
Windows shared resources in a domain ( smbutil(1), mount_smbfs(8),
nsmb.conf(5) ). I've ran into the following situation:
1. Listing the password literally (in the clear) in nsmb.conf allows
me to authenticate against the Windows do
On Monday 14 April 2008 21:45:32 Andy Christianson wrote:
> Is there a way to have the file system
> check for the partition that resides on the USB drive follow this same
> behavior?
man tunefs, specifically, it needs to be ufs2 partitioned. Good telltale if it
is ufs2 is the precense of a .sna
On Mon, 14 Apr 2008 22:12:52 +0200
Mel <[EMAIL PROTECTED]> wrote:
> On Monday 14 April 2008 21:45:32 Andy Christianson wrote:
>
> > Is there a way to have the file system
> > check for the partition that resides on the USB drive follow this
> > same behavior?
>
> man tunefs, specifically, it nee
Hello,
I tried running the script suggested by mel and after that I was able to see
that some of those packages got registered as installed.
However some of the packages were not being found and as an example I saw
the following:
Restoring doodle-0.6.6_1
Failed: cannot find doodle-0.6.6_1 in /us
On Monday 14 April 2008 22:02:22 Brother Seamus wrote:
> Hi Mel,
>
> Thanks for your reply - very insightful - i have beendelving into the c
> library files - which is after all why i am readingthis book, though still
> at the beginning 8).
>
> On the pracct.c source file I have found it sufficient
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience & help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
server. It has 2 drives - one for the OS and the other for the FTP
storage. My question is about the storage drive in this case.
You
At 03:27 PM 4/14/2008, Dharma Wolford wrote:
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience & help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
server. It has 2 drives - one for the OS and the other for the FTP
storage. My question
On Mon, Apr 14, 2008 at 01:27:24PM -0700, Dharma Wolford wrote:
> Hi folks,
>
> (I'm a relative newcomer to all this... thanks for your patience & help.)
>
> I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
> server. It has 2 drives - one for the OS and the other for
This platform is returning a bogus value for the main temperature sensor
using the ipmi(4) module in 6.3/amd64:
# ipmitool -V
ipmitool version 1.8.8
# ipmitool sdr
Temp | -54 degrees C | cr
Planar Temp | 30 degrees C | ok
That value should probably be an absolute v
Peter Boosten <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] wrote:
> > I am looking for a driver for the VIA VNT6656G6A40 54 MBps Wireless USB
> > Module to run on FreeBSD 7.0 i386. This is a daughterboard built around the
> > VIA 6656 chipset. Two VIA drivers are listed in /boot/defaults/loader.
On Monday 14 April 2008 18:36:30 Derek Ragona wrote:
> At 03:27 PM 4/14/2008, Dharma Wolford wrote:
> >Hi folks,
> >
> >(I'm a relative newcomer to all this... thanks for your patience & help.)
> >
> >I've installed FreeBSD 6.2 on a system that will be primarily used as an
> > FTP server. It has 2
On 0, Manolis Kiagias <[EMAIL PROTECTED]> wrote:
> Patsy wrote:
>>
>> I do not wish to take my website down and so I was hoping somebody would
>> be able to tell me if it is possible to throttle apache's upload speed. It
>> seems that this would provide a good solution - people will need to wai
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it - doesn't seem to be in my default libc,
however on 7.0-amd64?
Thanks,
Steve
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/list
On Tuesday 15 April 2008 00:15:45 David Kaye wrote:
> Just as a side note for anyone S'ing the FA's, when I ran:
>
> #pkg_add -r mod_cband
>
> it pulled down a version of mod_cband compiled for Apache 2.0, with Apache
> 2.0 therefore being a dependancy, it was pulled down as well. After I
> remove
On Tuesday 15 April 2008 00:43:24 Steve Franks wrote:
> I'm getting an undefined reference to strndup, so clearly there's a
> header somewhere with it - doesn't seem to be in my default libc,
> however on 7.0-amd64?
as BUF_strndup.
And no, there's no strndup.
--
Mel
Problem with today's modu
On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]> wrote:
> I'm getting an undefined reference to strndup, so clearly there's a
> header somewhere with it - doesn't seem to be in my default libc,
> however on 7.0-amd64?
I don't see an strndup() function in our libc.
[EMAIL PRO
On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo <[EMAIL PROTECTED]> wrote:
>
> If you issue the command:
>
> fdisk -I /dev/da1
>
> -I Initialize sector 0 slice table for one FreeBSD slice covering
> the entire disk.
>
> and then: ls /dev/da1*
>
> you'll get:
>
> /dev/da1
> /dev/d
Hi,
I need to work on some files and directories that have spaces in them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the file/directory name will be
missing and therefore lead to error.
What should I do to put escape key in there to include
On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote:
> On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]>
wrote:
> > I'm getting an undefined reference to strndup, so clearly there's a
> > header somewhere with it - doesn't seem to be in my default libc,
> > however on 7.
> While it seems like a cool function name, what's the point of having it?
> If you know how much you want to copy, it's trivial to allocate a buffer
> large enough and strlcpy() into it. If you don't know how much you want
> to copy, then strdup() is ok anyway :)
Granted. It's just one more
Simon Gao wrote:
> I need to work on some files and directories that have spaces in them like:
>
> interesting story\2008 March\{story one,story two}.
>
> When using find with -exec, part of the file/directory name will be missing
> and therefore lead to error.
>
> What should I do to put escap
On Monday 14 April 2008 12:25:14 Victor M. Blood wrote:
> On 14.04.2008, Da Rock wrote:
> > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
> >> Hi, All.
> >>
> >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
> >> saa driver, devices saa0, sau0, cii0 is present in
On Mon, Apr 14, 2008 at 04:08:11PM -0700, Dharma Wolford wrote:
> On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo <[EMAIL PROTECTED]> wrote:
>
> >
> > If you issue the command:
> >
> > fdisk -I /dev/da1
> >
> > -I Initialize sector 0 slice table for one FreeBSD slice covering
> >
On Mon, Apr 14, 2008, Simon Gao wrote:
>Hi,
>
>I need to work on some files and directories that have spaces in them like:
>
>interesting story\2008 March\{story one,story two}.
>
>When using find with -exec, part of the file/directory name will be
>missing and therefore lead to error.
Generally
On Mon, 14 Apr 2008 16:27:42 -0700, "Steve Franks" <[EMAIL PROTECTED]> wrote:
>> While it seems like a cool function name, what's the point of having it?
>> If you know how much you want to copy, it's trivial to allocate a buffer
>> large enough and strlcpy() into it. If you don't know how much
On Tue, 15 Apr 2008 01:26:40 +0200, Mel <[EMAIL PROTECTED]> wrote:
> On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote:
>> On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]>
> wrote:
>> > I'm getting an undefined reference to strndup, so clearly there's a
>> > header so
gang,
there's just something about kmail/kontact that grabs me the
wrong way. on my ubuntu server where gnome is my wm, i use
BOTH KDE and GNome, and use evo[gnome is my default]
here on my primary computer i chose kde. i know the 2 are
i
I have two terminal programs - cutecom and minicom, both built from
ports with no tweaks. Minicom will fire up and hit the serial port
just fine, but cutecom can't open it except with sudo. I tried
tweaking devfs.conf (as well as a straight chmod on /dev/cuad0), and
it doesn't seem to rectify th
On Mon, Apr 14, 2008 at 8:22 PM, Gary Kline <[EMAIL PROTECTED]> wrote:
>
>gang,
>
>there's just something about kmail/kontact that grabs me the
>wrong way. on my ubuntu server where gnome is my wm, i use
>BOTH KDE and GNome, and use evo[gnome is my default]
Hi guys,
I'm trying to install skype on freebsd 7.0-stable, but I can't find out what I'm
missing. I found several procedures on the web, but none of them was really
efficient to get it working. I thnk I have know severa linux_base installation,
maybe it could be the problem, so how to fix it?
On Tue, 15 Apr 2008 01:35:48 +
Sébastien Morand <[EMAIL PROTECTED]> wrote:
> Hi guys,
>
> I'm trying to install skype on freebsd 7.0-stable, but I can't find out what
> I'm
> missing. I found several procedures on the web, but none of them was really
> efficient to get it working. I thnk I
On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote:
> On Monday 14 April 2008 12:25:14 Victor M. Blood wrote:
> > On 14.04.2008, Da Rock wrote:
> > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
> > >> Hi, All.
> > >>
> > >> Anyone run tuner on phillips chip 7133/7135 on freebsd,
On Mon, 14 Apr 2008 16:39:23 -0700
Bill Campbell <[EMAIL PROTECTED]> wrote:
> On Mon, Apr 14, 2008, Simon Gao wrote:
> >Hi,
> >
> >I need to work on some files and directories that have spaces in
> >them like:
> >
> >interesting story\2008 March\{story one,story two}.
> >
> >When using find with -
I've been using Diigo and thought you might like to try it out. Here's
an invitation to create an account and connect with me on Diigo.
[1]most wanted ([EMAIL PROTECTED]) is a member of Diigo and would
like to send you an invitation.
To accept this invitation and register for your
On Monday 14 April 2008, Eduardo Cerejo said:
> On Tue, 15 Apr 2008 01:35:48 +
>
> Sébastien Morand <[EMAIL PROTECTED]> wrote:
> > Hi guys,
> >
> > I'm trying to install skype on freebsd 7.0-stable, but I can't
> > find out what I'm missing. I found several procedures on the web,
> > but none o
On 15.04.2008, Da Rock wrote:
> On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote:
>> On Monday 14 April 2008 12:25:14 Victor M. Blood wrote:
>> > On 14.04.2008, Da Rock wrote:
>> > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
>> > >> Hi, All.
>> > >>
>> > >> Anyone run tuner o
On 15.04.2008, Da Rock wrote:
How I can test my tuner? I'm newbee to bsd and can't understan why
tuner do not works, than driver loaded without errors
--
With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED]
FTN: 2:5024/[EMAIL PROTECTED], ICQ#3567656
___
96 matches
Mail list logo
