I have BOTH "ad0" (IDE HDD) AND "da0" (SCSI device #0). I posted detailed BIOS
settings and install steps in previous emails. I've attached the BIOS and SCSI
BIOS settings (with footnotes).
I have installed FreeBSD on da0 multiple times, each time creating a single
slice/partition on da0, and s
> Will someone please explain in detail how to run the FreeBSD fdisk util
> outside of the freebsd installer? Please provide detailed steps.
You just type fdisk devname where devname is the disk device.
There are a number of flags and parameters you may need to use.
Have you read the fdisk
Will someone please explain in detail how to run the FreeBSD fdisk util outside
of the freebsd installer? Please provide detailed steps.
What would the experts do next in this situation? I've checked and
double-checked BIOS (current version is same as what I have -- 1013, so did not
re-flash),
On Tue, Apr 10, 2007 at 07:48:07PM -0700, L Goodwin wrote:
> Is there a way to run the "FDISK" tool outside of the freebds installer?
> How do I change the disk configuration without reinstalling freebsd
> every @[EMAIL PROTECTED] time?
Yes, all sysinstall does is collect the information and ru
Is there a way to run the "FDISK" tool outside of the freebds installer? How do
I change the disk configuration without reinstalling freebsd every @[EMAIL
PROTECTED] time?
I really want to set up a FreeBSD server and appreciate the learning
experience, but it's way past the point where I should
it looks as if you've an IDE Interface onboard, too. Is it possible
that there are two ATA disks installed? Because the SCSI BIOS is only
installed when there are less then two ATA *disks* installed. Having
one Disk and one CD ROM should be fine, though.
Either try removing the ATA disks, or chec
At 08:14 PM 4/9/2007, L Goodwin wrote:
Derek Ragona said:
> Go into the SCSI BIOS and reset the SCSI to default values.
> If it still gives the same error on bootup, I would go into the SCSI
BIOS and
> low-level format that first drive, and reinstall FreeBSD.
> On the reinstall, I would just d
Derek Ragona said:
> Go into the SCSI BIOS and reset the SCSI to default values.
> If it still gives the same error on bootup, I would go into the SCSI BIOS and
> low-level format that first drive, and reinstall FreeBSD.
> On the reinstall, I would just do the partioning for that drive, and t
Derek, Boot Virus Protection is Disabled in the BIOS.
How to I make sure my SCSI BIOS is set to be bootable and has the correct disk
set for booting from? Please see my SCSI BIOS settings below and advise...
(I don't think this is the problem, as this machine was booting Windows 2000
Server from
At 12:56 AM 4/9/2007, L Goodwin wrote:
Hello. I tried posting this issue a few hours ago, but it did not appear
in my inbox, so I'm
trying once more. I've included details of the install in case it matters
(sorry about length).
I'm having trouble getting FreeBSD 6.2 to boot after installation.
L Goodwin wrote:
> Hello. I tried posting this issue a few hours ago, but it did not appear in
> my inbox, so I'm
> trying once more. I've included details of the install in case it matters
> (sorry about length).
>
> I'm having trouble getting FreeBSD 6.2 to boot after installation. After a
>
Hello. I tried posting this issue a few hours ago, but it did not appear in my
inbox, so I'm
trying once more. I've included details of the install in case it matters
(sorry about length).
I'm having trouble getting FreeBSD 6.2 to boot after installation. After a
"successful" install,
(re-)boot
12 matches
Mail list logo