Hi,
On Saturday 16 April 2011 14:42:43 Erik Trulsson wrote:
> On Sat, Apr 16, 2011 at 09:42:38AM +0700, Erich Dollansky wrote:
> > >
> > > # kldload snd_driver
> >
> > this will never work.
>
> Yes, it will. 'snd_driver' is a meta-module which depends on, and
> therefore will pull in, all the
On Sat, Apr 16, 2011 at 09:42:38AM +0700, Erich Dollansky wrote:
> Hi,
>
> did you really get no other answer?
>
> On Friday 15 April 2011 22:11:05 Zhang Weiwu, Beijing wrote:
> > Hello. I intend to use FreeBSD instead of PC-BSD. The sound card doesn't
> > work on FreeBSD 8.2. I tried to follow
On Sat, 16 Apr 2011 09:42:38 +0700 Erich Dollansky wrote:
> On Friday 15 April 2011 22:11:05 Zhang Weiwu, Beijing wrote:
> > Hello. I intend to use FreeBSD instead of PC-BSD. The sound card doesn't
> > work on FreeBSD 8.2. I tried to follow the manual and loaded all sound
> > card drivers
> >
>
Hi,
On Saturday 16 April 2011 11:16:39 Zhang Weiwu, Beijing wrote:
> On 04/16/2011 10:42 AM, Erich Dollansky wrote:
> > On Friday 15 April 2011 22:11:05 Zhang Weiwu, Beijing wrote:
> >> # kldload snd_driver
> > this will never work.
> >
> > You must load the driver for your sound card. Something l
On 04/16/2011 10:42 AM, Erich Dollansky wrote:
On Friday 15 April 2011 22:11:05 Zhang Weiwu, Beijing wrote:
# kldload snd_driver
this will never work.
You must load the driver for your sound card. Something like
kldload snd_hda
I am confused, because the handbook says the opposite:
http://
Hi,
did you really get no other answer?
On Friday 15 April 2011 22:11:05 Zhang Weiwu, Beijing wrote:
> Hello. I intend to use FreeBSD instead of PC-BSD. The sound card doesn't
> work on FreeBSD 8.2. I tried to follow the manual and loaded all sound
> card drivers
>
> # kldload snd_driver
this
On Sat, 27 Sep 2008 09:44:07 +1000
jonathan michaels <[EMAIL PROTECTED]> wrote:
> i do not understand this .. i mean i do not understant how freebsd can
> take a drive with the cylinders/heads/sectors that produces xxx
> million sectors that muitiplied by 512 bytes producs 120 gb (real gb)
> solar
On Sat, 27 Sep 2008 09:44:07 +1000 jonathan michaels <[EMAIL PROTECTED]> wrote:
> On Fri, Sep 26, 2008 at 08:52:42AM +0200, Bernt Hansson wrote:
> > jonathan michaels:
> >
> > >
> > > Sep 26 13:26:46 hostid kernel: pci0: at device 4.3 (no driver
> > > attached)
> > > Sep 26 13:26:46 host
greetings, bernt,
thank you for the help ..
On Fri, Sep 26, 2008 at 08:52:42AM +0200, Bernt Hansson wrote:
> jonathan michaels:
>
> >
> > Sep 26 13:26:46 hostid kernel: pci0: at device 4.3 (no driver
> > attached)
> > Sep 26 13:26:46 hostid kernel: csa0:
> > mem 0xf410-0xf4100fff,0xf400
jonathan michaels wrote:
> greetings, freebsd-questions,
>
> i recently got a handme-down box, some sort of hp desktop machine ? not
> sure what it is called, the source was more or less vague about its
> name/configuration ??? i put in a freebsd v7 cd and these bit fell out,
>
> after pluging s
Thank you all for your replies. It was snd_ich.
And sorry for the double post to the list. Despite having the list
option "Receive your own posts to the list" set, it seems when I send
messages to [EMAIL PROTECTED] I don't get my own copy. I reread the
mailing list info on the freebsd.org page
Joey,
More than likely snd_ich but best bet is to:
kldunload snd_driver
kldload snd_ich
dmesg
if pcm0 doesn't load then:
kldload snd_hda
Jeff
Hi,
I'm trying to determine what sound card a notebook has. There are
three relevant dmesg lines below, but looking at freebsd's hardware
notes, I can't
Joey Mingrone wrote:
Hi,
I'm trying to determine what sound card a notebook has. There are
three relevant dmesg lines below, but looking at freebsd's hardware
notes, I can't tell whether I should use the snd_ich(4) driver for an
Intel ICH4 card, the snd_hda(4) driver for an 82801 card or a si
On Thu 2008-06-12 12:28:06 UTC-0300, Joey Mingrone ([EMAIL PROTECTED]) wrote:
> I'm trying to determine what sound card a notebook has. There are
> three relevant dmesg lines below, but looking at freebsd's hardware
> notes, I can't tell whether I should use the snd_ich(4) driver for an
> Intel I
Hi,
I don't really ge an anwser to my own question, but I get a solution
to have my sound card working: use OSS and it's automatically
detected. My steps:
- Remove envy24ht from loader.conf
- Install oss (src required)
- Enable oss un rc.conf at boot time
dsp* devices are created, my sound card i
[EMAIL PROTECTED] írta:
dell 4300s with XP
Reinstalled xp, no sound from integrated sound device.
Do you mean Windows XP? It is a mailing list for FreeBSD. Anyway, it
took about 3 minutes to find this with google:
http://members.driverguide.com/driver/detail.php?driverid=123410
(Yes, you n
On 04/04/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
dell 4300s with XP
Reinstalled xp, no sound from integrated sound device.
You're kidding, right?
Why do you think you'll get help for WinXP issues on this list?
Thanks for assistance's
___
Derrick Edwards wrote:
> All,
> I upgraded to the lastest version of RELENG_6 and now my onboard sound does
> not work. It worked on earlier versions of RELENG_6(3 Months Ago). Did
> something change that I should be aware of. I rebuilt system again just to
> verify. I am using an SOYO SY-
Derrick
For most of the sound problems, I have got fixed reading the handbook
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-setup.html
may give you enough insigt to fix most problems
Best regards
DAk
On 1/13/07, Garrett Cooper <[EMAIL PROTECTED]> wrote:
-BEGIN PGP SIG
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Derrick Edwards wrote:
> All,
> I upgraded to the lastest version of RELENG_6 and now my onboard sound does
> not work. It worked on earlier versions of RELENG_6(3 Months Ago). Did
> something change that I should be aware of. I rebuilt system
Allen D. Tate wrote:
> Hello All,
>
> I have a PC with a built in SoundMax audio card that I have disabled in
> the BIOS because everything I have read to date is that they just don't
> work with FreeBSD. For those of you who have working sound cards, would
> you mind sharing the brand name and le
Andrew P. wrote this in December 2004:
> I grepped sysctl list and found hw.snd.pcm0.spdif_enabled
> switch, but when I change it 0->1, the sound disappears
> (both analog and digital outputs are silent). I tried
> to play with other hw.snd switches, changed mixer levels
> and recsrc, searched the
Vulpes Velox wrote:
On Wed, 27 Jul 2005 17:03:53 -0700
Julian Elischer <[EMAIL PROTECTED]> wrote:
I need to buy 30 soundcards that can be accessed from FreeBSD
does someone know of a currently available basic sound card
(an original soundblaster would do if I could still get them) that
has
On Thu, May 12, 2005 at 03:06:12AM -0400, Ionel wrote:
>
> Hello,
> I have an Yamaha OPL3SA2 sound card, isa-pnp.
> I had last year installed FreeBSD 5.2.1, and my sound card was supported, I
> had to add "device pcm" in the kernel configuration file.
> Now I installed FreeBSD 5.4, and I can't ma
>>>(uuu) pwd
>>>/usr/src
>>>(uuu) grep ALC658 sys/dev/sound/pcm/ac97.c
>>>{ 0x414c4780, 0x0f, 0, "ALC658",0 },
>>>
>>>so, besides I do not know about deep thinks you
>>>detailed below, it seems there is some hope...
>>
>>Yep, thanks for advice! my ALC658 soundcard worked
>>great on Free
On Thu, 09 Dec 2004 13:22:31 +0300, Andrew <[EMAIL PROTECTED]> wrote:
>
> I need a nice soundcard with a fully functional S/PDIF >coaxial and optical
> outputs, that can send unencoded >44.1kHz, 48kHz and encoded AC3 and DTS
You can look here:
http://www.freebsd.org/releases/5.3R/hardware-amd64
On Fri, 29 Oct 2004 12:14:45 -0600
Jason Sheets <[EMAIL PROTECTED]> wrote:
> Hello everyone,
>
> I'm having trouble controlling the sound level of my sound card,
> specifically volume adjustments using mixer and other volume control
> tools don't change the actual volume.
>
> For example when
I have 4 vchans, but this won't help. Both Enemy Territory and teamSpeak
will put dsp0(.x*) in playback/recording, and this isn't possible. I need
either a dsp1 device or a way to make enemy territory launch in playback
only.
Is there a way to create the dsp1 device?
Regards
> On Sat, 3 Jul 200
On Sat, Jul 03, 2004 at 11:48:24PM -, Hugo Silva wrote:
> Hi,
>
> I need to create a dsp1 device. I'm running FreeBSD 5.2.1-RELEASE-p9
>
> I've tried:
> [EMAIL PROTECTED]:/dev]# mknod /dev/dsp1 c 30 0x0013
> mknod: /dev/dsp1: No such file or directory
>
> but no luck.. I need this device
On Sat, 3 Jul 2004 23:48:24 - (GMT), Hugo Silva <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I need to create a dsp1 device. I'm running FreeBSD 5.2.1-RELEASE-p9
>
> I've tried:
> [EMAIL PROTECTED]:/dev]# mknod /dev/dsp1 c 30 0x0013
> mknod: /dev/dsp1: No such file or directory
>
> but no luck..
On 06/10/04 06:29 PM, Bob Johnson sat at the `puter and typed:
> > Message: 8
> > Date: Wed, 9 Jun 2004 21:55:14 -0400
> > From: Louis LeBlanc <[EMAIL PROTECTED]>
> > Subject: FreeBSD 4.10 RELEASE questions
> > To: FreeBSD Questions <[EMAIL PROTECTED]>
> > Message-ID: <[EMAIL PROTECTED]>
> >
> > H
Message: 8
Date: Wed, 9 Jun 2004 21:55:14 -0400
From: Louis LeBlanc <[EMAIL PROTECTED]>
Subject: FreeBSD 4.10 RELEASE questions
To: FreeBSD Questions <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Hey everyone. I have a confusing situation here with the new kernel.
I just upgraded to 4.10, an
I can tell you that audigy cards only work in current. I don't know if
the sony phillips digital interface (or whatever) works in freebsd or
not. I've never tried. The opensound commercial drivers may support
it.
On May 20, 2004, at 9:36 PM, Andy Miller wrote:
Hello all. I"m in the market fo
Well, Finally i figure this out. By using Kde tool to setup the mixer volume
was not working. After loading the drivers i changed the vol from the "mixer
vol +60". It worked like charm. Everyone's help was appericiated.
thanks
On Friday 14 November 2003 08:33 am, [EMAIL PROTECTED] wrote:
> H
> > I don't see a sound card (or a not-recognized card) either.
> > Could you also try 'pnpinfo' (again as root)?
> Also this is on board sound card. That would explain why it is not
> showing up in pciconf, right?
It showed up on pnpinfo, so it was probably not wired on the PCI bus.
Since it's a
> b# pnpinfo
> Checking for Plug-n-Play devices...
>
> Card assigned CSN #1
> Vendor ID CSC6835 (0x3568630e), Serial Number 0x
> PnP Version 1.0, Vendor Version 1
> Device Description: CS4236B
>
> Logical Device ID: CSC 0x630e #0
> Device Description: WSS/SB
Okay, that's a sound
Also this is on board sound card. That would explain why it is not showing up
in pciconf, right?
On Friday 14 November 2003 11:29 am, Cordula's Web wrote:
> > I have not complied the kernel but here is the picconf. Should i complie
> > the kernel and then do picconf? I do not see the sound card i
Here is the output from pnpinfo. How do i complie kldload?
fb# kldstat
Id Refs AddressSize Name
13 0xc010 5877a4 kernel
21 0xc0688000 4a30cacpi.ko
b# pnpinfo
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CSC6835 (0x3568630e), Serial Number 0x
> I have not complied the kernel but here is the picconf. Should i complie the
> kernel and then do picconf? I do not see the sound card in here. thanks for
> the quick reply.
I don't see a sound card (or a not-recognized card) either.
Could you also try 'pnpinfo' (again as root)?
What was the
On Friday 14 November 2003 10:43 am, Cordula's Web wrote:
> > > Can someone point me to enabling sound on FreeBsd 5.1. Also when i use
> > > to start my Xsession (startx) computer used to prompt with some message
> > > about sound. I have suppressed it. How do change the system to get that
> > > me
> > Can someone point me to enabling sound on FreeBsd 5.1. Also when i use to
> > start my Xsession (startx) computer used to prompt with some message about
> > sound. I have suppressed it. How do change the system to get that message
> > again.
>
> 1) your hardware (soundcard type - is it supp
Hi "List"!
In essence, it should work - it works on my machine.
Could you please give us more details about:
1) your hardware (soundcard type - is it supported?)
2) if it is supported, did you compile the module in the kernel?
3) if it is not not compiled in the kernel, did you load the module?
I got this error and no sound... I realize this
is probably something obvious...
Regards,
Jarek
> -Original Message-
> From: Eric F Crist [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, October 01, 2003 4:03 PM
> To: Jarosław Nozderko; [EMAIL PROTECTED]
> Subject: Re: Sou
-BEGIN PGP SIGNED MESSAGE-
Try doing this in your kernel config file:
device pcm
it's not an 'option'
Eric Crist
AdTech Integrated Systems, Inc
(952) 403-9000
On Wednesday 01 October 2003 03:35 am, Jarosław Nozderko wrote:
> OS: FreeBSD 5.1-RELEASE
>
> Hi,
>
> I have cheap, ISA soun
On 26 Sep 2003 13:59:23 +1000 Psyche101 <[EMAIL PROTECTED]> probably wrote:
> Hiya
>
> Tried splay, same result. Also ran xmms from an xterm, no errors or
> verbose output of any kind, all seemed smooth. I have found stacks of
> esound dirs on my setup, not sure which one I should be looking at,
Hiya
Tried splay, same result. Also ran xmms from an xterm, no errors or
verbose output of any kind, all seemed smooth. I have found stacks of
esound dirs on my setup, not sure which one I should be looking at,
couldn't see one attached to xmms, found and opened the artsd folder I
could find, but
Hiya
Thanks - a little messing around, and some very helpful information from
Sergey and Danny have got my sound card recognised. Only small problem
is that hissing sound that you get from"cat /dev/urandom>/dev/dsp" is
all I can get (at least it's a sound :~))when running xmms, kaboodle, or
jus
On Tue, 2003-09-23 at 21:44, Danny Pansters wrote:
> > [EMAIL PROTECTED]:11:0:class=0x03 card=0x
> > chip=0x88115333 rev=0x00 hdr=0x00
> > vendor = 'S3 Incorporated'
> > device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
> > class= display
> >
On Mon, 2003-09-22 at 21:43, Andy K wrote:
> Hi All
>
> Thanks C Ulrich, Ill give that a try - I have checked where the speakers
> are plugged in, all is good, I even tried the others just in case - can
> you recommend a good mixer program from the ports collection ?
> (Ports rawk)
>
> Andrew Ko
Hi All
Thanks C Ulrich, Ill give that a try - I have checked where the speakers
are plugged in, all is good, I even tried the others just in case - can
you recommend a good mixer program from the ports collection ?
(Ports rawk)
Andrew Kozak
FreeBSD Rox My Sox !!
--- Begin Message ---
On Mon, 2
On Mon, 2003-09-22 at 20:25, Andy K wrote:
> Hi Everyone
>
> Seems that quite a few people are having sound probs !
>
> I am about to join in here - I also cannot get my sound card to
> operate.I have a P2 with a 20 gig Hdd and 128Mb RAM - the machine has
> onboard sound so I tried all the opti
On Tuesday 19 August 2003 02:21 am, Vlado Korcek wrote:
>Hi People,
>
>I've tried to set up the sound card on my machine but
> unsuccessfully
>
>:-(
>
>I'm running FreeBSD 5.0. The MB is Abit NF7-S based on nForce2
>chipset. The sound card is on board: AC 97 CODEC on board
>
+-- Abhijeet Sane [freebsd] [04-08-03 17:35 +0530]:
| hi all ,
| i want to know how to enable my sound card from freebsd . ( i am using
| freeBSD 5.0 and my sound card is yamaha ISA opl3sax) i have tried to load
| the sound modules . but the mpg123 or eswd daemon says that there is no
| /dev/dsp
> > I have the following problem with FreeBSD 4.7-STABLE (running XFree86
> > 4.2.0).
> >
> > Recently, my AGP graphics card (Matrox G200) stopped working (a hardware
> > defect), so I used a rather old PCI Mach64 card instead. I also have
> > a Soundblaster AWE 64 (ISA, using pcm) in my box.
> >
>
On Tue, 10 Jun 2003 10:17:29 +0200, Thomas Schuerger
<[EMAIL PROTECTED]> wrote:
Hi,
I have the following problem with FreeBSD 4.7-STABLE (running XFree86
4.2.0).
Recently, my AGP graphics card (Matrox G200) stopped working (a hardware
defect), so I used a rather old PCI Mach64 card instead. I al
Hi,
On Fri, Feb 21, 2003 at 09:00:29AM -0600, Brian Henning wrote:
> I noticed that is FBSD4.7 that when i am using the sound device in one process
> that the system blocks that device so no other processes can use the sound
> device until that process is killed. I know that in windows 2000 that i
On Tuesday 11 February 2003 19:40, Ian Barnes wrote:
> Hi,
>
> I have a sound blaster live value, with Cambride Soundworks 5.1 Surround
> Speakers. I am running FreeBSD 5.0 Rel, in my kernel config i have device
> pcm, my sound works fine. The only thing that is bothering me, is that it
> the surro
On Wed, 01 Jan 2003 18:36:05 -0500, Tom Parquette wrote:
>I'm starting to look at adding a basic sound card to my machine.
>I'm looking at Sound Blaster since it seems to be the least common
>denominator.
>
>The motherboard does not have any ISA slots. (PCI only).
>The man page on the web site i
> Is a PCI sound blaster card supported?
I've found that FreeBSD 4.7 so far has supported every odd sound card I've thrown its
way.
Even (especially!) those on-board sound things built into motherboards and laptops
these days. FreeBSD supports them all (and Windows usually doesn't without the
On Wed, 1 Jan 2003, Tom Parquette wrote:
> Date: Wed, 01 Jan 2003 18:36:05 -0500
> From: Tom Parquette <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Sound card question
>
> I'm starting to look at adding a basic sound card to my machine.
> I'm looking at Sound Blaster since it seems to b
60 matches
Mail list logo
