On 08/04/13 17:22, Gary Aitken wrote:
Ok, so now I see that my cpu temperature shoots up pretty dang fast when a
build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS M4A89TD PRO / USB3 motherboard.
The system works fine unless I start a cpu-intensive
temperature issues (was Re: hardware monitor)
You can also try shutting down (obviously), then removing the heat sink, put
some thermal paste on the processor and reinstall the heat sink. Sometimes
there isn't much (any) thermal paste there and the processor can't get the
heat into the heat sink
On 05/08/2013 06:05, Gary Aitken wrote:
On 08/04/13 21:39, Frank Leonhardt wrote:
This suggests it's not the ACPI in FreeBSD shutting you down, but
something on the motherboard.
That was my guess as well.
big snip
As it's probably not FreeBSD you're now asking on the wrong list, and
other
Gary Aitken vagab...@blackfoot.net wrote:
Air ducting shouldn't be a problem; I've got the side of the case off...
This just might be part of the problem. Air plumbing
is not as forgiving as it was in the old days.
___
freebsd-questions@freebsd.org
On Mon, 5 Aug 2013 10:33:55 +0400
Eugene wrote:
Hello Gary,
Also make sure there is no packed dirt on the heatsink -- I don't
know about AMDs, but older Intel heatsinks often tend to accumulate a
paper-like layer of dirt on the 'top' of heatsink grid, blocking the
airflow. I once had
On Sun, 04 Aug 2013 14:48:56 -0600, Gary Aitken wrote:
Can anyone suggest a hardware monitor app in the ports tree?
I've got an amd64 which may have a temperature issue,
but I can't see it to tell...
If it's primarily about temperature... amdtemp (kernel
module), healthd (system service),
On 04/08/2013 21:48, Gary Aitken wrote:
Can anyone suggest a hardware monitor app in the ports tree?
I've got an amd64 which may have a temperature issue,
but I can't see it to tell...
Try sysctl hw.acpi.thermal
For more information see man acpi and man acpi_thermal. If you're
lucky it
Ok, so now I see that my cpu temperature shoots up pretty dang fast when a
build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS M4A89TD PRO / USB3 motherboard.
The system works fine unless I start a cpu-intensive build.
If I leave it unattended, after some
On 08/04/13 17:22, Gary Aitken wrote:
Ok, so now I see that my cpu temperature shoots up pretty dang fast when a
build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS M4A89TD PRO / USB3 motherboard.
The system works fine unless I start a cpu-intensive
On 8/4/2013 6:29 PM, Gary Aitken wrote:
On 08/04/13 17:22, Gary Aitken wrote:
Ok, so now I see that my cpu temperature shoots up pretty dang fast when a
build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS M4A89TD PRO / USB3 motherboard.
The system works
On 05/08/2013 00:29, Gary Aitken wrote:
On 08/04/13 17:22, Gary Aitken wrote:
Ok, so now I see that my cpu temperature shoots up pretty dang fast when a
build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS M4A89TD PRO / USB3 motherboard.
The system works
On 08/04/13 18:30, Frank Leonhardt wrote:
On 05/08/2013 00:29, Gary Aitken wrote:
On 08/04/13 17:22, Gary Aitken wrote:
Ok, so now I see that my cpu temperature shoots up pretty dang
fast when a build is going on.
I'm running an AMD Phenom II X4 with the AMD-supplied fan in an
ASUS
On 05/08/2013 03:01, Gary Aitken wrote:
50C isn't crazy.
Actually, the 50C figure is just where it shoots to for starters.
Mfg specs say 62C max, so I stall the process when it gets around 59
and still climbing steeply.
The manufactures specs I found when I looked that range of CPUs up was
On 08/04/13 21:39, Frank Leonhardt wrote:
On 05/08/2013 03:01, Gary Aitken wrote:
50C isn't crazy.
Actually, the 50C figure is just where it shoots to for starters.
Mfg specs say 62C max, so I stall the process when it gets around
59 and still climbing steeply.
The manufactures specs I
You can also try shutting down (obviously), then removing the heat sink, put
some thermal paste on the processor and reinstall the heat sink. Sometimes
there isn't much (any) thermal paste there and the processor can't get the heat
into the heat sink.
On 2013, Aug 4, at 15:22, Gary Aitken
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Capozzoli
Sent: Saturday, June 23, 2007 11:22 AM
To: freebsd-questions@freebsd.org
Subject: Re: Hardware monitor needed
On 6/21/07, Eduardo Viruena Silva [EMAIL PROTECTED] wrote:
On Thu, 21
On 6/21/07, Eduardo Viruena Silva [EMAIL PROTECTED] wrote:
On Thu, 21 Jun 2007, Laszlo Nagy wrote:
Hi,
My FreeBSD 6.2 server restarts suddenly once or twice a day. I believe it is
because the processor is overheated, but I'm not sure. Is there a way to
check this from software? I would
Laszlo Nagy wrote:
Hi,
My FreeBSD 6.2 server restarts suddenly once or twice a day. I believe
it is because the processor is overheated, but I'm not sure. Is there
a way to check this from software? I would like to install a hardware
monitor program that can log out processor temperature
Check out healthd or mbmon. One or other has worked OK for me on
other Asus boards, and both are in ports (sysutils/ I think).
If you have ACPI and your board supports thermal zones, then you can
check those.
sysctl -a | egrep 'acpi.*therm'
or
sysctl -a | egrep 'acpi.*tz'
one or
On Thu, 21 Jun 2007, Laszlo Nagy wrote:
Hi,
My FreeBSD 6.2 server restarts suddenly once or twice a day. I believe it is
because the processor is overheated, but I'm not sure. Is there a way to
check this from software? I would like to install a hardware monitor program
that can log out
Laszlo Nagy wrote:
Check out healthd or mbmon. One or other has worked OK for me on
other Asus boards, and both are in ports (sysutils/ I think).
If you have ACPI and your board supports thermal zones, then you can
check those.
sysctl -a | egrep 'acpi.*therm'
or
sysctl -a | egrep
Hello,
Laszlo Nagy wrote:
This server is an X terminal server and the users connect to it with 'X
-query ip'. Can I do something to reduce the load on the CPU?
gnome-volume-manage uses 99% of the CPU, constantly - why?
--Alex
You can try to trace them, what they are doing, what functions
Gary,
You're right.
I could recompile the kernel now, however lmmon is not returning
any value, neither healthd is.
The relevant part of dmesg is:
ichsmb0: Intel 82801BA (ICH2) SMBus controller port 0xefa0-0xefaf irq 17
at device 31.3 on pci0
smbus0: System Management
[EMAIL PROTECTED] writes:
|device ichsmb
|
|
|I get this error messages:
|
|In file included from /usr/src/sys/dev/ichsmb/ichsmb.c:64:
|/usr/src/sys/dev/ichsmb/ichsmb_var.h:44:22: smbus_if.h: No such file or
Looks like you forgot to read the ichsmb manpage or the conf/NOTES
file
24 matches
Mail list logo