Reinhold wrote:
So, upon connection, there was a bandwidth of 64000bps, but upon
closing that session, the b/w is 9600bps.
I see the same things since I started logging the connection.
At the start I see this
mpd5: [B-3] Bundle: Status update: up 1 link, total bandwidth 64000 bps
and at the en
>
> So, upon connection, there was a bandwidth of 64000bps, but upon
> closing that session, the b/w is 9600bps.
>
I see the same things since I started logging the connection.
At the start I see this
mpd5: [B-3] Bundle: Status update: up 1 link, total bandwidth 64000 bps
and at the end its
mpd5:
On Mon, Jun 2, 2008 at 5:37 PM, Reinhold <[EMAIL PROTECTED]> wrote:
> For me mpd5 have been running perfectly when it comes to bandwidth. But
> then again I'm using adsl here.
>
> I'm using mpd5 to connect to 2 adsl lines and then allow pptp in on one of
> them. So far I had almost no problems with
For me mpd5 have been running perfectly when it comes to bandwidth. But
then again I'm using adsl here.
I'm using mpd5 to connect to 2 adsl lines and then allow pptp in on one of
them. So far I had almost no problems with it at all.
send me the config, I have to warn you that its a bit hard to te
I have both mpd4 and mpd5 able to work on my box! The only thing I
hate in the logs is that mpd5 appears to allocate lower connection
bandwidth than mpd4. I don't know if this makes sense, but because of
that, I default to using mpd4. V5 is just there for playing with, and
answering others like you
Nope I only had
mpd_enable="YES"
in it before and that used to work perfectly.
That's why I was stumped at what was the cause to the problem.
I have another server that accepts pptp connections and I only have
mpd_enable in the rc.conf file and its working like a dream.
Very weird.
Reinhold
On
I thought you already had that entry in rc.conf?
That's why I didn't even look that side.
Anyway it's great to hear you're fine now.
On 6/2/08, Reinhold <[EMAIL PROTECTED]> wrote:
> Hi
>
> Thanks for the help
> Its working again \o/
>
> All I did was enabled logging like you suggested and made a
Hi
Thanks for the help
Its working again \o/
All I did was enabled logging like you suggested and made a change in
/etc/rc.conf.
I've added this
mpd_flags="-b -s mpd5"
Then restarted mpd5 and bang it worked.
Thanks again.
Reinhold
On Mon, June 2, 2008 11:01, Odhiambo Washington wrote:
> On Mo
On Mon, Jun 2, 2008 at 10:45 AM, Reinhold <[EMAIL PROTECTED]> wrote:
> Hi.
>
> I'm still struggling with this problem, is there anyone out there that can
> offer me some help please
What I've done most of the times is to log all communications with mpd
by adding a logging entry into /etc/syslog.co
On Mon, Jun 2, 2008 at 10:45 AM, Reinhold <[EMAIL PROTECTED]> wrote:
> Hi.
>
> I'm still struggling with this problem, is there anyone out there that can
> offer me some help please
I have tested your changes on my mpd5 as well.
(a) I assigned 10.1.10.1 as alias IP:
ifconfig xl0 inet 10.1.10.1 al
Hi.
I'm still struggling with this problem, is there anyone out there that can
offer me some help please
Thanks
Reinhold
On Thu, May 29, 2008 11:13, Reinhold wrote:
> Hi
>
>
> I'm using mpd5 for pptp connections and last night I had to change our
> subnet from 192.168.1.0/24 to 10.1.10.0/24 afte
Hi
I'm using mpd5 for pptp connections and last night I had to change our
subnet from 192.168.1.0/24 to 10.1.10.0/24 after I've made all the changes
to all the config files I rebooted and everything is working except for
pptp.
I'm using mpd5 for 2 x adsl pppoe and pptp.
Here is the pptp section
p
12 matches
Mail list logo
