22 сентября 2017 г., 02:35, "Keith Hellman"
написал:
> On Wed, Sep 20, 2017 at 11:06:11PM +, freebsd-stable List wrote:
>
>> Sometimes it even can boot, but in few minutes will hang with same errors.
>>
>> Hardware: Supermicro X8DTN+-F / 6xWD1502FYPS-02W3B0
Hello,
After updating to 11.1 my home server can't boot with errors like
(ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 50 29 10 40 6c 00 0c 00
(ada0:ata2:0:0:0): CAM status: Command timeout
(ada0:ata2:0:0:0): Retrying command
for all 6 sata hdd(stripe from 2 raidz)
ACB different from boot to boot
.
--
Andrei
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
to use svn over portsnap would be that you can do a port
downgrade if needed. Before we had ports-mgmt/portdowngrade for this but
that relies on CVS which is no longer supported. Maybe there's another
way that I'm missing.
--
Andrei
___
freebsd
/installworld as in handbook.
You can see also http://forums.freebsd.org/showthread.php?t=2930
Regards,
Andrei Brezan
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
-STABLE, world and kernel compiled fine, and booting from mirrored
pool v15 was also fine.
...booting from RAIDZ2 pool v15 was bad... :(
---
Best regards, Andrei Lavreniyuk.
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman
Hi!
Just tried to rebuild FreeNAS 7 from svn with FreeBSD 8.1p2 and after
iso image rebuild I tried to start it in VMware Player 3.1.3.
--
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address =
2010/11/29 Xin LI delp...@delphij.net:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 11/28/10 23:28, Andrei Kolu wrote:
Hi,
trouble with rebooting on Intel Atom motherboard D525MWV.
--
...
All buffers synced.
Uptime 4m 27s
here: ftp://ftp10.freebsd.org/pub/FreeBSD/snapshots/201009/
Andrei Kolu
Raidon Raalid OÜ
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr
2010/9/15 Zara Kanaeva zara.kana...@ggi.uni-tuebingen.de
Hi all,
vor 2 hours i made a very stupid mistake: i have deleted (as root
naturally) a part of /usr-directory. I have definitely deleted .snap and
presumably 100-150 files in /usr/bin. If my attempt with backup-restore
failed, can i
Hi!
I am testing FreeBSD 8.1-RC2 amd64 networking stuff and notice one
strange DSCP message with wireshark:
Internet Protocol, Src: 192.168.1.111 (192.168.1.111), Dst:
192.168.1.101 (192.168.1.101)
Differentiated Services Field: 0x10 (DSCP 0x04: Unknown DSCP;
2010/7/12 Kevin Oberman ober...@es.net:
From: Andrei Kolu an...@bsd.ee
Date: Mon, 12 Jul 2010 15:31:58 +0300
Sender: owner-freebsd-sta...@freebsd.org
Hi!
I am testing FreeBSD 8.1-RC2 amd64 networking stuff and notice one
strange DSCP message with wireshark
are extremely unstable with ECC enabled.
Finally I replaced my Kingston ECC DDR2 with no-ECC memory on Asus
board and bought Intel s3210shlx server board for my workstation.
Andrei Kolu
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org
LinkedIn
Andrei Antoukh requested to add you as a connection on LinkedIn:
--
Valeriy,
I'd like to add you to my professional network on LinkedIn.
- Andrei
Accept invitation from Andrei Antoukh
http://www.linkedin.com/e
and hw.cardbus.cis_debug=1 is
here -
http://pastebin.com/m63175351
i am ready to give shell access if anyone need it
wbr
Andrei
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
Lars Eggert wrote:
On 2009-4-7, at 14:21, Julian Stacey wrote:
Perhaps some SOC student might like to develop some extension to
fetch, or a new tool to intelligently save net bandwidth human
time (if not this year if SOC bids are in, then next) :
Intelligently automatically sniff fetch
Garance A Drosihn wrote:
Some friends of mine are looking at the new DroboPro, which makes a
lot of disk space available via iSCSI (in addition to firewire 800),
and they were wondering how well iSCSI works with FreeBSD. I haven't
paid attention to iSCSI support. Is there anyone using it
2009/4/4 Alex alexz...@mail.ru
Hi,
I have small home file server running FreeBSD 7.0 and 4x500 GBytes ZFS
volume. Currently I have Samba 3.0.34 from ports working fine. When I
install latest Samba 3.3.2 from ports any access to shares residing on ZFS
volume cause panic in samba. Access to
Ivan Voras wrote:
Andrei Kolu wrote:
Ivan Voras wrote:
2009/3/25 Barry Pederson b...@barryp.org:
Is there any reason not to skip labeling/partitioning and use da1
directly?
Just newfs it and mount it. I've done this with a couple large Areca
arrays with no ill effect so
Ivan Voras wrote:
2009/3/25 Barry Pederson b...@barryp.org:
Is there any reason not to skip labeling/partitioning and use da1 directly?
Just newfs it and mount it. I've done this with a couple large Areca
arrays with no ill effect so far.
Nope, no practical reason. Skip the
Hi,
I have trouble to create FreeBSD 7.1 i386 partition/slice to 3Ware 8port
raid kontroller with 8x500GB drives attached to it. Raid 5 massive is
3,1TB in size and during sysinstall installation I select whole
available space but after restart I can access only 1,2TB from it. What
is the
Ivan Voras wrote:
Andrei Kolu wrote:
Hi,
I have trouble to create FreeBSD 7.1 i386 partition/slice to 3Ware 8port
raid kontroller with 8x500GB drives attached to it. Raid 5 massive is
3,1TB in size and during sysinstall installation I select whole
available space but after restart I can
Hello!
As long time FreeBSD user I am concerned about RELEASE and STABLE
configuration files inconsistency. No big deal but really annoying if
you want to upgrade systems occassionally. The problem is that there is
huge amount of old files between RELEASE and STABLE config files- more
Doug Barton wrote:
On Thu, 12 Mar 2009, Andrei Kolu wrote:
Hello!
As long time FreeBSD user I am concerned about RELEASE and STABLE
configuration files inconsistency.
This topic was covered recently, you might want to check the archives.
-# $FreeBSD: src/etc/rc.d/network_ipv6,v 1.37.18.1
Daisuke Aoyama wrote:
I am interested in giving this a try, though not immediately as I
am away from the office at the moment. Do I need to apply a patch
to iscontrol to make it work though ? I can't work it out from your
statement above.
Yes, you need.
Than ks. Is the intent to integrate
I configured iscsi-target on FreeBSD 7.1 and after I mounted target from
VMware ESXi I got this following error message:
---
Jan 23 14:26:35 srv6 iscsi-target: pid 11892:disk.c:956:
Martin wrote:
Am Sat, 17 Jan 2009 21:23:09 +1100
schrieb Tony Maher tonyma...@optusnet.com.au:
Hello,
I have been running FreeBSD 7 from around 2008-10-20 and experienced
the occasional problems with usb mouse and keyboard. The mouse
pointer slowly drift to a corner of the screen and not
mergemaster -p
make installworld | tee /root/make-installworld-090108.out
make delete-old (forgot to do tee redirect)
mergemaster -i (did not do tee redirect)
shutdown -r now
Oliver Fromme wrote:
Greg Byshenk wrote:
Andrei Kolu wrote:
Mike Lempriere wrote:
Hi folks -- sorry to be a nag
Mike Lempriere wrote:
Hi folks -- sorry to be a nag, but my main production system is barely
limping along on an old kernel with mismatched libraries. I have no
idea what else to do -- please help!
---
I'm upgrading 5-stable (was at 5.5) to 6-stable, in preparation for
6-stable to 7-stable.
Mike Lempriere wrote:
upgrading 5-stable (was at 5.5) to 6-stable, in preparation for
6-stable to 7-stable.
No problems with cvsup, make buildworld, make buildkernel, mergemaster
-p.
make installkernel, boot to single user, then mergemaster -- blammo:
config
Jeremy Chadwick wrote:
On Mon, Oct 06, 2008 at 09:02:33AM +0200, Bartosz Stec wrote:
Alfred Perlstein wrote:
* Bartosz Stec [EMAIL PROTECTED] [081003 07:23] wrote:
Hello again :)
With POLLING enabled I experience about 10%-25% performance drop when
copying files over
Clifton Royston wrote:
On Mon, Oct 06, 2008 at 10:29:35AM +0300, Andrei Kolu wrote:
...
I remember when on FreeBSD 4.x I was able to copy files from samba and
to samba up to 12MB/s on 100Mbit lan.
This part seems unlikely, particularly as bit rates are measured in
decimal millions
it to second- leaving more important features
to first one.
Andrei Kolu
IT-Juht
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello.
I have problems using USB to RS232 converter under FreeBSD 6.3-STABLE when
connecting to any Cisco gear over serial link. I connect my adapter to
notebook and dmesg output looks like this one:
ucom0: Prolific Technology Inc. USB-Serial Controller D, rev 1.10/4.00, addr 2
I have also
On Saturday 05 April 2008 23:48:59 you wrote:
On Sat, 5 Apr 2008, Andrei Kolu wrote:
I have problems using USB to RS232 converter under FreeBSD 6.3-STABLE
when connecting to any Cisco gear over serial link. I connect my adapter
to notebook and dmesg output looks like this one:
ucom0
On Sunday 06 April 2008 00:24:38 Andrei Kolu wrote:
On Saturday 05 April 2008 23:48:59 you wrote:
On Sat, 5 Apr 2008, Andrei Kolu wrote:
I have problems using USB to RS232 converter under FreeBSD 6.3-STABLE
when connecting to any Cisco gear over serial link. I connect my
adapter
into base tree for more than a year?
Andrei
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Sunday 06 April 2008 01:12:53 Andrei Kolu wrote:
On Sunday 06 April 2008 00:32:17 Alec Kloss wrote:
The the attached patch, also available at
http://setfilepointer.com/pub/src:sys:dev:usb:uplcom.c.patch
might help. I've needed it to make uplcom stuff work.
This patch works just
On Monday 31 March 2008 12:31:49 한원희 wrote:
I installed FreeBSD 7.0 on HP DL 380.
This is a mptable result.
# mptable
Processors: APIC ID Version State Family Model Step
Flags 0 0x14BSP, usable 6 2 1 0x0381 6
0x14AP, usable
On Tuesday 25 March 2008 14:39:01 Andrei Kolu wrote:
Anyone notice anything strange here? Why ohci (usb) got so huge number of
interrupts? Even if I have no usb devices connected to this box.
39.6%Sys 37.9%Intr 0.0%User 0.0%Nice 22.5%Idle
# systat -vm
Interrupts
101k total
96514 ohci0
Anyone notice anything strange here? Why ohci (usb) got so huge number of
interrupts? Even if I have no usb devices connected to this box.
39.6%Sys 37.9%Intr 0.0%User 0.0%Nice 22.5%Idle
# systat -vm
Interrupts
101k total
96514 ohci0 ohci
ata0 irq14
587 twa0 irq16
em1 irq25
2000 cpu0: time
can stop it by enabling it in rc.conf but
what the point? Same problem when I want to start some service without
appropriate line in rc.conf. I'd prefer to see somekind of warning about
misconfigured rc.conf or at least information about what's going on in
reality.
Andrei
Wednesday 28 November 2007 21:55:44 kirjutas Trond Endrestøl:
On Wed, 28 Nov 2007 20:37+0100, Milan Obuch wrote:
On Wednesday 28 November 2007 20:16:51 Andrei Kolu wrote:
1) Disable powerd in rc.conf- comment it out.
# enable_powerd=YES
2) Stop powerd
# /etc/rc.d/powerd stop
Sunday 18 November 2007 21:01:59 kirjutas Dmitry Karasik:
Hello,
My 6.2-STABLE crashed today, and when I rebooted it, a very strange effect
appeared: from the second the kernel took over, immediately after loading
all .ko files, no text was printed in the console. The system booted
though,
Sunday 04 November 2007 18:04:55 kirjutas Ladislav Bodnar:
On Sunday 04 November 2007, Ken Smith wrote:
The 7.0-BETA2 builds have completed and are on many of the FreeBSD
mirror sites. If you want to update an existing machine using cvsup use
RELENG_7 as the branch tag. Instructions on
not use that usefully?).
I am positive I was able to use emergency shell and livecd function on CURRENT
september snapsot just fine (i386 version though).
Andrei
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
Monday 05 November 2007 11:22:30 kirjutas Stefan Lambrev:
Hi,
Andrei Kolu wrote:
After some experimenting with BETA1/1.5 or whatever it is I encountered
serious problems:
1. Emergency shell on tty3 is useless- not a single command is available.
This is install CD not fixit CD
Friday 24 August 2007 23:04:37 kirjutas Matthew Dillon:
A friend of mine once told me that the only worthwhile RAID systems are
the ones that email you a detailed message when something goes south.
-Matt
According to Theo de Raadth http://marc.info/?l=openbsd-miscm=118296441702631
latest Intel Core 2 Duo processors are buggy as hell. What counter-measures
are taken within FreeBSD community?
___
freebsd-stable@freebsd.org mailing list
LIBICONV
#optionsCD9660_ICONV
#optionsMSDOSFS_ICONV
#optionsNTFS_ICONV
#optionsUDF_ICONV
then make complete.
I look after it already month...
Best regards, Andrei V. Lavreniyuk.
___
freebsd-stable
Wednesday 13 June 2007 03:37:12 kirjutas John Walthall:
On Tuesday 12 June 2007 5:15:50 pm Lisa Besko wrote:
# Andrei Kolu wrote:
# Hello guys!
#
# I have strange problem enabling DRI on Intel 855GM graphics card.
Kernel
# I justrebuild world and I'm running FreeBSD 6.2-STABLE #4 now
Hello guys!
I have strange problem enabling DRI on Intel 855GM graphics card. Kernel shows
that everything is allright but why I enable DRI in xorg.conf and startx then
system freeze and reboot without any error message- /var/log/Xorg.log.0 file
was not updated with error or anything similar.
00 00
BTX halted
---
I tried with FreeBSD 6.1, 6.2, 6.2p4
same result. Linux and Windows XP booted from cd just fine so I am sure this
is not hardware problem.
Andrei
___
freebsd-stable
= ethernet
Best regards, Andrei V. Lavreniyuk.
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/mlxd0s1a
GEOM_ELI: Device mlxd0s1b.eli created.
GEOM_ELI: Encryption: AES-CBC 256
GEOM_ELI: Crypto: software
Best regards, Andrei V. Lavreniyuk
created.
GEOM_ELI: Encryption: AES-CBC 256
GEOM_ELI: Crypto: software
WARNING: /zip was not properly dismounted
--
Best regards, Andrei V. Lavreniyuk.
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org
that the DVD drive he has doesn't support a particular ATAPI
function (long reads comes to mind). ASC 0x24 ASCQ 0x00 is Illegal
field in CDB for most ATAPI operatons...
Kernel from March works normally...
Best regards, Andrei V. Lavreniyuk.
___
freebsd
hw.acpi.cpu.cx_lowest=C1
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
Best regards, Andrei V. Lavreniyuk.
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
in the device of reading/record. A start takes a
place normally.
Test 2:
To start k3b without a disk in the device of reading/record. At a start the
k3b system hangs up and overloaded.
PS: My pkg_list attached.
Best regards, Andrei V. Lavreniyuk.
GeoIP-1.4.2
On Thursday 19 April 2007 03:31, you wrote:
how in the werld did i manage to remove myself from wheel. i just
ran mergemaster -p
is there any documentation for that command that would explain
the complex nonsense ..
mergemaster -p can't mess with your system- it preserves necessary changes
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Thu Apr 19 21:04:38
On Wednesday 18 April 2007 09:26, KAYVEN RIESE wrote:
okay. i am getting a serious stomach ache. i am looking at this page:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
and my head is spinning. i don't feel good. i am halfway thru doing
something or other
On Saturday 14 April 2007 10:36, Daniel O'Connor wrote:
On Friday 13 April 2007 16:17, patrick wrote:
Unfortunately that makes it impossible to interrupt the loader to go
into single user mode (or whatever).
that is depending on the situation you are in. there are more ways to get
in
On Friday 06 April 2007 02:43, Kevin Oberman wrote:
I always run a 2000 line scrollback buffer. 200 won't make it to the
start of my boot. And, it's SC_HISTORY_SIZE. I'm unclear as to what you
refer to as 'slideshow like teleporting', though.
in case someone want colourful console
options
On Friday 16 March 2007 1:55 am, Deniss Lee wrote:
Nothing really has changed to my box (no new software, configuration
issues). I just like
rebuilding world/kernel to the latest -STABLE at least once in week. And
about two weeks
ago I started getting strange freezes. Since then I've tried
-=(oo)=(cvsup7.ru.freebsd.org)=-
Connected to 195.14.50.21
Updating collection ports-all/cvs
..
Change ports-supfile to standard-supfile if you want to update system source
from fastest cvs server. You can run this script from cron if you want.
Andrei
On Saturday 03 March 2007 19:04, Stefan 'Steve' Tell wrote:
Hi,
I still have this problem. Any hints?
* [EMAIL PROTECTED] (Stefan 'Steve' Tell) wrote:
I cannot get Enhanced Speedstep working on my new laptop (Medion
MD98000). Maybe you guys have an idea ...
, [ dmesg | grep est ]
On Monday 26 February 2007 13:45, Andrei Kolu wrote:
On Saturday 24 February 2007 7:51 pm, Andrei Kolu wrote:
FreeBSD 6.1-RELEASE-p11
Motherboard: Supermicro P8SCi
CPU: Pentium 4 640
I have HyperThreading enabled...
Enabling powerd gave me this error message:
est0: Enhanced
On Saturday 24 February 2007 7:51 pm, Andrei Kolu wrote:
FreeBSD 6.1-RELEASE-p11
Motherboard: Supermicro P8SCi
CPU: Pentium 4 640
I have HyperThreading enabled...
Enabling powerd gave me this error message:
est0: Enhanced SpeedStep Frequency Control on cpu0
est1: Enhanced SpeedStep
FreeBSD 6.1-RELEASE-p11
Motherboard: Supermicro P8SCi
CPU: Pentium 4 640
I have HyperThreading enabled...
Enabling powerd gave me this error message:
est0: Enhanced SpeedStep Frequency Control on cpu0
est1: Enhanced SpeedStep Frequency Control on cpu1
est: CPU supports Enhanced Speedstep, but
On Sunday 04 February 2007 08:45, S. M. Ibrahim (Lavlu) wrote:
i installed freebsd 6 on a old laptop, it's p3 600 mhz.
everthing goes fine, but after installation, my len is not working. It's
IBM 10/10 EtherJet CardBus Adapter and connected in pcmci . it's not
detected. Any idea ?
On Sunday, 14. January 2007 16:27, Pietro Cerutti wrote:
On 1/14/07, Peter Ankerstål [EMAIL PROTECTED] wrote:
ad0: FAILURE - READ_DMA timed out LBA=1000941
This kind of errors usually denote a hardware problem, either at the
disk or at the controller level.
Check sysutils/smartmontools in
On Wednesday, 10. January 2007 19:34, George Hartzell wrote:
I'm setting up a Dell Poweredge 750 1U server. A friend is loaning me
space in his rack and since his rack usage is limited by power I'd
like to be as thrifty as possible.
Any other suggestions to help economize?
edit
On Sunday, 7. January 2007 20:08, Peter Jeremy wrote:
On Sun, 2007-Jan-07 17:44:24 +0100, Christoph Illnar wrote:
I keep having troubles compiling either 6.1-RELEASE and 6.2-RC2.
I downloaded sources, extracted them with install.sh and did a cvsup.
My installed system is 6.1-RELEASE and I
On Thursday, 21. December 2006 17:33, Oliver Fromme wrote:
Suhail Choudhury [EMAIL PROTECTED] wrote:
What's the easiest way to add an IP such as 80.192.49.213 to block it?
Easiest way to block any activity is to use /etc/hosts.allow file.
Port: denyhosts-2.5
Path:
On Friday 10 November 2006 03:45, Robert Marella wrote:
Aloha All
One of my computers has an Asus A8N-VM motherboard. I have been running
i386 on it for nearly a year. I played around with AMD64 earlier stuck
with the i386.
Last week I set up a dual boot with i386 and AMD64. The i386 is on
On Monday 23 October 2006 5:42 pm, Alex Burke wrote:
Hi,
Just to say that this report may well seem a little sparse, but I
really don't know what exactly to look for so if anybody needs extra
information just shout and I will get it for you ASAP.
When I check the X.org log file, it says
Card reader won't recognize any CF card and smart card inserted- same reader
works just fine under XP (it automatically downloaded drivers from MS- I say
this because I am sure this device is in working condition)- don't know who
is manufacturer. Any other USB2 and USB1 flash card is working
--- dima [EMAIL PROTECTED] wrote:
1. if you edited GENERIC, not the copy of it, you
can download a copy from cvsweb.freebsd.org or cvs
it.
2. default /etc/make.conf should be empty.
3. you can get the security/errata patched sources
of 5.3-RELEASE (actually called 5.3-RELEASE-p5) by
give me some directions of where
to go. People tend not to like this long messages and
usually avoid them.
Best regards,
andrei
__
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
http://promotions.yahoo.com/new_mail
, because i've got a celeron tualatin) and
CFLAGS= -O -pipe.
andrei
__
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250
___
freebsd-stable
:
Timecounter i8254 frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.82-MHz 686-class CPU)
System version:
FreeBSD 4.10-STABLE #0: Mon Nov 8 06:50:54 PST 2004
I will glad to have help.
Thank you in advance.
--
Andrei Grudiy.
Ukraine
: Mon Nov 8 06:50:54 PST 2004
I will glad to have help.
Thank you in advance.
--
Andrei Grudiy.
Ukraine.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
83 matches
Mail list logo