Title: Snmp trap
It
wouldnt be hard to write your own script to either a) plug in as a
module to execute sending a trap on failure or b) monitor the log file and do
the same.
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Yoram Baruchian
Sent:
Rejecting request 86445 due to lack of any response from
home server
What could be causing this, tell me what to post and I will,
I just didnt want to spam the list with all my confs and radiusd X,
though Ive looked through debug and nothing makes sense as to what is
causing this.
:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Anson Rinesmith
Sent: Tuesday, 15 March 2005 2:30
PM
To:
freeradius-users@lists.freeradius.org
Subject: Rejecting Request
Rejecting request 86445 due to lack
of any response from home server
What could be causing this, tell me
what to post
Xmit is the Upload, and Data-Rate is the Download rates.
Just remember, those are given from the Ascend Equipments point of view.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Marendra Nutriaji
Sent: Monday, January 10, 2005 8:28 PM
I had a similar problem, when I didn't install MySQL before installing FR.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of vamsikv
Sent: Wednesday, December 08, 2004 1:20 AM
To: [EMAIL PROTECTED]
Subject: Freeradius installation problem
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Nurul Faizal M.Shukeri
Sent: Tuesday, December 07, 2004 4:52 PM
To: [EMAIL PROTECTED]
Subject: Check Multiple Calling-Station-Id in mysql
Hi to all,
I'm using freeradius 1.0.1. I'm
I have it running in a production environment as both actual RADIUS and a
PROXY server. 10,000 users and I see no difference from when I had it in a
test environment with 10 users. P3 667 w/256Mb RAM.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On
Well, as everyone could have guessed, they talk aboout fields.
A summary of the RADIUS data format is shown below. The fields
are transmitted from left to right.
They then switch to calling them attributes, for no good reason.
If you were REALLY comprehending the document, then
I particularly like this one (at end of 4.3):
Attributes
The Attribute field is variable in length, and contains a list
of zero or more Attributes.
!!! Yeah. Are they trying to make a pastiche comedy sketch takeoff of
themselves?
Section 4 is clearly describing PACKETS, a
If you feel so strongly about changes needing to be made, then why not make
an official comment to the RFC and try to make things better? An RFC is, by
the way, a Request For Clarification.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Peter T.
Breuer
I would love to see a feature for logging by either realm, client, or even
by CLID. Does the newer FR (.9) having where radius.log can be sent to a DB
instead?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Saturday, November 27, 2004
I have 1,736,884 in my current MySQL table.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alexander Serkin
Sent: Monday, November 22, 2004 1:11 PM
To: [EMAIL PROTECTED]
Subject: how many records in radacct
Hello,
how many records
= 2.2.2.2:1646
secret = donttellanyone
}
realm isp3 {
type= radius
authhost= 3.3.3.3:1645
accthost= 3.3.3.3:1646
secret = youdontknow
nostrip
}
Anson Rinesmith
-
List info/subscribe/unsubscribe? See
Most likely, the user did not enter a password to be sent. Thus no
User-Password attribute.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Edgars
Sent: Wednesday, October 13, 2004 8:08 AM
To: [EMAIL PROTECTED]
Subject: radius.log
You can't make the radius server just guess when to perform an action or
what information to use. If the client isn't sending a accounting
information to the server, then I would start there and try to figure out
how to get your client sending accounting information, not just
authentication
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Tuesday, October 12, 2004 10:12 AM
To: [EMAIL PROTECTED]
Subject: Re: realm + accounting
marek cervenka [EMAIL PROTECTED] wrote:
i need store acct data on two places
Im using a central freeradius/MySQL setup to do
proxying for 3 ISPs. I keep accounting records for each ISP. The problem
is that every record has the Realm set as DEFAULT. I would like to have the
realm reflect the realm it was proxied to.
My SQL statement, in sql.conf looks like this:
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Graeme Hinchliffe
Sent: Monday, August 02, 2004 3:21 AM
To: FreeRADIUS list
Subject: RE: A suggestion
On Fri, 2004-07-30 at 17:53, Anson Rinesmith wrote:
That would be okay, if each
I dont understand your problem. If
it is reporting 192.168.10.5 as the NAS IP, and you are running NTRadPing from
that same server, then it sounds like it is behaving properly. What is the
problem, what are you trying to accomplish?
-Original Message-
From: [EMAIL PROTECTED]
:19:26 2004 : Info: rlm_sql_mysql: Starting connect to MySQL
server for #0
This record has one less field before the actual message is given, than the
previous record given.
Just a thought for the future, if something unique, like | was used.
Anson Rinesmith
-
List info/subscribe/unsubscribe
.
Anson Rinesmith
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
.
Anson Rinesmith
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
:41 AM
To: FreeRADIUS list
Subject: Re: A suggestion
On Fri, 2004-07-30 at 15:42, Anson Rinesmith wrote:
Fri Jul 30 09:19:26 2004 : Info: rlm_sql (sql): Attempting to connect to
[EMAIL PROTECTED]:/radius
could you not use RegEx to match each portion of the logfile?
you could use
Nothing is showing up in the logs. That's why I want to know if it's a
freeRadius issue, not working right, or if the RAS isn't getting the request
to me. NTRadping allows me to quickly isolate the issue.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED]
Thanks.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Friday, July 30, 2004 12:18 PM
To: [EMAIL PROTECTED]
Subject: Re: Linux type NTRadPing?
Anson Rinesmith [EMAIL PROTECTED] wrote:
Nothing is showing up
For me, in radcheck, I had to use == as my
op
And in radreply I had to use :=
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Barry Murphy
Sent: Tuesday, July 27, 2004 6:04
AM
To:
[EMAIL PROTECTED]
Subject: radreply mysql
Hi,
Anywhere I can find some good screen shots along with functionality of
dialup admin?
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Rick Smith
Sent: Friday, July 23, 2004 8:18 AM
To: [EMAIL PROTECTED]
Subject: RE: New Opensource
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Thursday, July 22, 2004 10:38 AM
To: [EMAIL PROTECTED]
Subject: Re: Is there a ChangeLog
Anson Rinesmith [EMAIL PROTECTED] wrote:
That's my problem, I DON'T know how
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Kostas Kalevras
Sent: Thursday, July 22, 2004 11:26 AM
To: [EMAIL PROTECTED]
Subject: RE: Is there a ChangeLog
On Thu, 22 Jul 2004, Anson Rinesmith wrote:
-Original Message
: Is there a ChangeLog
Anson Rinesmith wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Wednesday, July 21, 2004 1:23 PM
To: [EMAIL PROTECTED]
Subject: Re: Is there a ChangeLog
Anson Rinesmith [EMAIL PROTECTED
I would like to find out what new features have been added since my
version of FreeRADIUS. I looked but this was the best I found: It is a significant leap in functionality over
0.9.3, and contains too many bug fixes and feature enhancements to list in
detail.
Im looking specifically for
If you can radtest directly to the server, then you need to setup the PIX to
do its VPN authentication against the server.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alhagie Puye
Sent: Wednesday, July 21, 2004 8:24 AM
To: [EMAIL
To be sure, just add column headers to your excel sheet before you export
it. Just make your headers match your field names.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of sarky
Sent: Wednesday, July 21, 2004 11:43 AM
To: [EMAIL
-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Wednesday, July 21, 2004 1:02 PM
To: [EMAIL PROTECTED]
Subject: Re: Is there a ChangeLog
Anson Rinesmith [EMAIL PROTECTED] wrote:
Can the /var/log/radiusd.log file be sent to a database instead?
Not currently. But you can write a script
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Wednesday, July 21, 2004 1:23 PM
To: [EMAIL PROTECTED]
Subject: Re: Is there a ChangeLog
Anson Rinesmith [EMAIL PROTECTED] wrote:
My biggest issue is that I want
the data exported to a DB and
file for
redundancy, should not be too difficult.
For now I will try to find the pipe based stuff, and see what I can do
with it.
Anson Rinesmith wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf
Run radius in debug mode (radiusd -X) and see if you can figure out what is
happening.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Maqbool Hashim
Sent: Wednesday, June 30, 2004 11:24 AM
To: [EMAIL PROTECTED]
Subject: problems with
It would be very easy in the sql.conf what table is looked at, and what
the field names are that contain the information you want.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kirti
S. Bajwa
Sent: Saturday, June 05, 2004 11:06 AM
To: [EMAIL PROTECTED];
Maybe your OP needs to be :=
Just something you could try, before an educated answer happens by.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Stefan Grünbaum
Sent: Monday, May 24, 2004 4:21 PM
To: [EMAIL PROTECTED]
Subject: Problem
It isn't really that hard, the work isn't in the MAX or the FR server. All
you have to do is have a group for nopay users. Assign them out of a
different IP pool, possibly even a private subnet. Then in the Next hop
router, you would have to reroute all web traffic from that subnet to your
webpage
I have two radius servers, one stores them in /usr/local/var/log and the
other in /var/log
Just depends on what version of FR you are using and/or how you set it up in
radiusd.conf
Try doing a find / -name radius.log that should help you find your log file.
-Original Message-
From:
You probably need to add the extentions .html .htm to your configuration
so that apache knows to try and process those as PHP.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Evan Stenmark
Sent: Friday, May 14, 2004 1:47 PM
To: [EMAIL
If you have it setup in radiusd.conf to
look for @ to determine realms, then all you need to do is add that information
to users and acct_users.
[EMAIL PROTECTED]
you would set up
realm domain.com {
type = radius
authhost = ipaddressHere:1645
accthost = ipaddressHere:1645
From a previous solution:
About freeRADIUS:
1. We suppose that you MySQL installs under /home/mysql
2. ./configure --prefix = /home/radius --with-rlm-sql_mysql-include-dir =
/home/mysql/include/myql 3. make make install 4. mkdir /home/radius/src
5. cp
An Ascend MAX2000 will handle 1 T1, and has been a very reliable NAS for me
in the past.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, April 29, 2004 2:17 AM
To: [EMAIL PROTECTED]
Subject: any NAS with
Im using freeRadius with MySQL
In radgroupreply, GroupName, Attribute, op, Value,
prio
I have multiple ISPs logging into one RAS. First ISP
needs to class Cs, pools 1 and 2. Second ISP needs 3 Class Cs,
pools 3, 4 5. etc..
Therefore I cannot use isp1, X-Ascend-Assign-IP-Pool, :=, 0
The NAS reports from ITs point of
view, so Output, would be what it sends to the remote client. Input would be
what it received from the remote client.
So Output, would be what the PC downloaded
and vice versa.
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL
Yes, its 8(octal) bits, or 1 byte.
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Raymond
Sent: Thursday, February 26, 2004
1:03 AM
To:
[EMAIL PROTECTED]
Subject: What the unit of
AcctInputOctets, AcctOutputOctets
Hi
Would anyone
something Ill have to live with?
Anson Rinesmith
PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Monday, February 23, 2004 12:38 PM
To: [EMAIL PROTECTED]
Subject: Re: Multiple realms
Anson Rinesmith [EMAIL PROTECTED] wrote:
I would like the SQL database field realm to properly reflect what
realm it is actually
Sent: Monday, February 23, 2004 2:46 PM
To: [EMAIL PROTECTED]
Subject: Re: Multiple realms
Anson Rinesmith [EMAIL PROTECTED] wrote:
DEFAULT Called-Station-Id == 2345678901, Realm := isp1.net
In both users and acct_users
And I still get DEFAULT put in the realm field in my database
radiusproxy port 6 cli ) );
Wed Feb 18 03:03:20 2004 : Auth: Login incorrect: [billiem/)]
(from client radiusproxy port 6 cli ) );
Wed Feb 18 03:02:31 2004 : Auth: Login incorrect: [billiem/\355]
(from client radiusproxy port 6 cli ) );
Anson Rinesmith
Internet
To: [EMAIL PROTECTED]
Subject: Re: radius.log rotate?
Anson Rinesmith wrote:
Does the radius.log file rotate when it gets large?
If not, has anyone written a script to do this?
Thanks,
Anson
I have been meaning to look into having the log file dynamically named
Please post your results here, as I know I would be interested to know if
this works.
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Guy Fraser
Sent: Wednesday, February 11, 2004 1:35 PM
To: [EMAIL PROTECTED]
Subject: Re: Problem
I'm using a freeradius server to identify proxies to about 3 other RADIUS
servers.
One of them happens to be a freeradius server. When it puts the acct
information in the DB (on both the proxyied and proxying, it just puts in
DEFAULT as the realm, though it got proxyied via realm theisp.com.
the passwords into cleartext ( I dont think is possible
without knowing the key)?
Anson Rinesmith
would be entered in the interface, and what a dialup user would type
in.
In the DB, I would like Crypt-Password ==
fd6rkdObsV8yw
Sorry for the stupid first mail.
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anson Rinesmith
Sent: Friday
Alan,
Would you be willing to work with me some off the mailing list?
-Original Message-
From: [EMAIL PROTECTED] [mailto:freeradius-
[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Monday, January 26, 2004 1:17 PM
To: [EMAIL PROTECTED]
Subject: Re: radius.log
Anson Rinesmith
Can anyone tell me where the radius.log file is configured? I would
like to have a file for each realm.
Anson Rinesmith [EMAIL PROTECTED] wrote:
Can anyone tell me where the radius.log file is configured?
$ grep radius.log /etc/raddb/*
I know where the file is
I would like to have a file for each realm.
That is not currently supported.
Can you think of a way to pull certain
Anson Rinesmith [EMAIL PROTECTED] wrote:
I am trying to set up a scenario with an Ascend NAS. Using freeradius
0.7.0
You really should upgrade.
I agree, but when I used 0.9.3 I got the sql instantiation error.
I was thinking if I put a line in the files {} section of
radiusd.conf
FYI, I know everywhere on www.freeradius.org
it claims this is NOT freeradius fault, but I removed 0.9.2 and
installed 0.7 and it installed the rlm_sql_mysql.so file and runs sql
perfectly. Makes me think there IS something that needs to be looked at in
0.9.2
Just my thoughts.
Anson
works. Am
I on the right track? Where would I put such a command, or am I just missing
what I should change?
logdir = ${localstatedir}//%{Called-Station-ID}/radius.log
is the most logical think Ive tried.
Anson Rinesmith
-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anson Rinesmith
Sent: Friday, January 16, 2004
3:30 PM
To:
[EMAIL PROTECTED]
Subject: Mulitple radius.log files
I am trying to set up a scenario
with an Ascend NAS. Using freeradius 0.7.0 as a proxy on FreeBSD 5.2, I can
Our users file contains the following DEFAULT entry :
You have
DEFAUTL Auth-Type := Accept, Called-Station-Id == 1
DEFAULT Called-Station-ID == 9995551234, Auth-Type := Accept
Is Closer to what you need in your users file
-
List info/subscribe/unsubscribe? See
is
(empty username).
Any tips?
Thanks
On Wed, 14 Jan 2004, Anson Rinesmith wrote:
Our users file contains the following DEFAULT entry :
You have
DEFAUTL Auth-Type := Accept, Called-Station-Id == 1
DEFAULT Called-Station-ID == 9995551234, Auth-Type := Accept
Is Closer to what you need
How do I know where it's going?
I would LOVE for this to go to my MYSQL database.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, January 13, 2004 9:00 AM
To: [EMAIL PROTECTED]
Subject: Re: Error Messages
The point is...
Just set their Auth-Type := Reject, no need to change the password.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Devin
Atencio
Sent: Wednesday, January 07, 2004 12:11 PM
To: [EMAIL PROTECTED]
Subject: Disabling User
I was wondering if there was an
68 matches
Mail list logo