I had the same problem. I ended up rebinding the mplayer
keys using the mplayer input.conf file to match the freevo
bindings. This ways, the keys always work the same regardless
of whether or not a video is playing.
Jim
"Pferdekaemper, Thorsten" <[EMAIL PROTECTED]> wrote in message
news:<[EMAI
I figured out what my problem was. I fat-fingered the fstab file.
Instead of /dev/dvd, I had /dev/dev. Works fine now that I
fixed fstab.
Jim
"Jim Duda" <[EMAIL PROTECTED]> wrote in message news:<[EMAIL PROTECTED]>...
> Second posting, new information.
>
> Using freevo 1.4.1
>
> My linux com
I've had the same on pal. My sollution was to change the res e.g. 720x576.
So try some res's. If someone had a good sollution for this i'd like it too,
800x600 is a bit better in the menu's for vid's it's not better since pal
doesn't do 800x600 as far as i know.
Also does anyone knows what's the b
Magnus, thanks for sharing your experience.
Magnus Einarsson wrote:
> I have the same problems as you, but i can not seem to find a directfb
> and libsdl combination that works for freevo.
On my epia M10K SDL CVS with DirectFB CVS (both from Jan 4) work like a
charm together. These problems
I have the same problems as you, but i can not seem to find a directfb
and libsdl combination that works for freevo.
With lidsdl 1.2.6 i get unsupported pixelformat, with a cvs copy from
november i get crashes in pygame.
The latest cvs snapshot of sdl does not configure for me, the autogen.sh
s
and freevo using the dxr3 output happily put's things right up to the edge
of the video. the clock and other things including the idlebar needs to be
moved in and down significantly. I.E. it's easier to simply make them
positionable.. and allow overscan setting to move them in or out + or - 20
per
>Thanks, I will give this a try. I am a little confused though.
>Everything I have been reading says that with a Composite connection you
>can only achieve 640x480i resolution. Also that PAL and NTSC can only
>do about 15 khz. From your configuration, it looks like you are
>achieving 800x600 an
For everyone, this is an important read: http://scanline.ca/overscan/
Mark Benson wrote:
If you are going to use overscan, then the interface should be designed to
take into account the TV Safe area.
Freevo does take into account the safe action area and overscan area
(referring to the area outs
Hi Dirk!
Sorry to bother you but could you give me a small hint how I can map the
Shutdown Event to the Power button?
I tried to add the following line " POWER= Event('SHUTDOWN') " to
freevo without success!
Thanks in advance
> -Original Message-
> From: [EMAIL PROTECTED]
> [mai
this sounds like a unterminated video problem. if you are handy with a
soldering iron and made your own cable, put a 75 ohm resistor across the
video signal pin (center of the RCA cable) to ground. Or modify a RCA cable
to have a 75 ohm resistor across the center and outside.. this will either
cor
> how close is the freevo output to a cable tv or sattelite box output?
VERY washed out. There is a noticeable difference when I tune my VCR or
cable box to a channel (both of which look about the same) and switch to
the Freevo. This is particularly noticeable in dark scenes (where the
freevo
If you are going to use overscan, then the interface should be designed to
take into account the TV Safe area.
I think there needs to be overscan specific version.
- Original Message -
From: "Gray, Tim" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 16, 2004 1:39 PM
Su
Hi,
the two messages do not mean anything harmful. The first is only an information. The
second just tells you that your remote control won't work (if you have one...).
You also do not need a TV card to make freevo work.
Freevo always writes some log files. On my system, they can be found in /tm
yes I have, and I also need to make the GUI image smaller somehow.
overscan settings will not take negative numbers so those are useless (I
want a -20 setting!)
I am using the runtime + 1.4 (1.4.1 has a bug that will not let it run
outside the home directory) on a slackware 9.1 install.
so yes i
I've installed Freevo onto a Slackware 9 system compiling all dependent libs without
any problems. Starting freevo gives me a flash of the system before exiting with the
message:
ROM_DRIVES: Auto-detected and added "('/mnt/cdrom', '/dev/cdrom', 'CD-1')"
WARNING: PyLirc not found, lirc remote con
Note: those "calibration" discs are only to set your TV to the DVD's output.
your dvd player is very likely not putting out a perfect NTSC/PAL signal and
can only be measured with a video waveform monitor.
I mention this as I have 2 DVD players, one of which is darker than the
other, and both are
Hi,
I have come across a problem I could not track down yet. It seems like mplayer does
not really run in slave mode when playing movies, bit it does when playing music.
Normally when playing a movie with freevo, I could use the "+" and "-" keys on the
numpad to increase or decrease the volume.
"Frederik" wrote:
> Hi!
>
> I just resend my questions as nobody replied! Is my question so stupid or
> does nobody knows the answer!
>
> Can anyone explain to me what the Button "F2 - Power" Button which is
>
> mentioned in the help is doing?
>
> On my box not much is happening!
It's no mapped to
Barnowl wrote:
> Tim-
> Have you got Xine working freevo on your dxr3? Mine keeps quitely
> failing in freevo though it works if I run it in X, fbxine fails on
> the console with dxr3. Also did you figure out how to adjust the
> scan setting on the dxr3? I need to make the image smaller to fit on
On Thu, 15 Jan 2004, Cameron Vetter wrote:
> Ok, I think I'm closing in on getting this install but once again rpm
> and its useless man page are getting underfoot. So I carefully
> downloaded and installed like 20 different dependancies until the freevo
> rpm would finally install. Then I type
Hi,
I have just encountered some problems when trying to download files with the freevo
webserver.
When clicking on the download link, it did load about the first 64k, but not further.
In the webserver log file (/tmp/freevo/webserver-1001.log) I found
...Warning! request.finish called tw
21 matches
Mail list logo