I'm using the modeline from this link:
http://www.sput.nl/hardware/tv-x.html
and my xorg.conf looks like this:
Section Monitor
Identifier monitor1
Modeline 736x485i 14.16 736 760 824 904 485 491 496 525
interlace -hsync -vsync
EndSection
[...]
When I try to open an
Cláudio Henrique wrote:
I didn't get what your problem is, but at home, after emerge -e world,
GDM decided not to work. upon further investigation, nvidia did not
load. so I had to recompile my kernel and then recompile
nvidia-drivers to make it work again.
I hope it helps.
regards
Same
Mick wrote:
On Wednesday 13 September 2006 05:27, Dale wrote:
Cool. I need to mark this one important so I can find it again. Do you
notice anything missing like in OOo, Mozilla/Seamonkey or anything like
that??
Nothing that is apparent from the small exposure that I have had to the
I have a new 2006.1 installation on a notebook.
Now i'm try to install xorg
I'm using the new profile "default-linux/x86/2006.1/desktop"
My make.conf
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="radeon fglrx vesa"
running "emerge xorg-x11"
I got the following error, also at the end of it
Hi,
I'd like to keep several configurations.
Is it possible to setup additional sets like MyWorld,...
in addition to world and say emerge MyWorld ?
This for a hint,
Helmut Jarausch
Lehrstuhl fuer Numerische Mathematik
RWTH - Aachen University
D 52056 Aachen, Germany
--
how about a emerge --info and a copy of your Xorg.log, so we can
provide you better clues.
On 9/13/06, Michael W. Holdeman [EMAIL PROTECTED] wrote:
After finally upgrading to xorg-7.1 cause I finally decided nvidia-drivers
were working well enough, now my kde-3.5.4 that was already installed
Hi,
On Thu, 14 Sep 2006 13:44:22 +0200 (CEST) Helmut Jarausch
[EMAIL PROTECTED] wrote:
I'd like to keep several configurations.
Is it possible to setup additional sets like MyWorld,...
in addition to world and say emerge MyWorld ?
you can create a (meta-)ebuild that doesn't install anything
Hi guys,
I have a client that needs traffic that comes down a satillite connection
to be routed onto a LAN where their multicast app will pick itup to handle
the stream.
The machine has a sat car and lan card.
The idea is to recieve IP data on the sat and route it onto the lan
I have some
Hello,
whenever I run emerge it aborts with the following error message:
localhost # emerge --sync
Performing Global Updates: /usr/portage/profiles/updates/3Q-2006
(Could take a couple of minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
Try this:
rm /usr/portage/metadata/timestamp.chk
emerge --sync
Frank Baumeister wrote:
Hello,
whenever I run emerge it aborts with the following error message:
localhost # emerge --sync
Performing Global Updates: /usr/portage/profiles/updates/3Q-2006
(Could take a couple of minutes if
Hi,
On Thu, 14 Sep 2006 14:30:06 +0200 (SAST) [EMAIL PROTECTED] wrote:
mrouted doens't work with 2.4 (according to docs)
What docs? Well, I see it being written in the ebuild, but given that
mrouted-3.9-beta3 is existing since June 1999, I don't think it is
actually true. Did you try compiling
Hi,
On Thu, 14 Sep 2006 14:30:06 +0200 (SAST) [EMAIL PROTECTED] wrote:
mrouted doens't work with 2.4 (according to docs)
What docs? Well, I see it being written in the ebuild, but given that
mrouted-3.9-beta3 is existing since June 1999, I don't think it is
actually true. Did you try
Mark Knecht wrote:
Hi,
I'm just wondering how one goes about creating higher/lower
priority Ethernet traffic on a home network. Is it possible?
Difficult?
When I'm in my office working on my Gentoo box I have two main
things I'm doing across a wireless network:
1) Watching MythTV.
Moin,
how can I add binaries to the initramfs image with genkernel? Is it possible?
Matthias
--
gentoo-user@gentoo.org mailing list
On Thursday 14 September 2006 07:03, Richard Fish wrote:
2. Remove ~amd64 from keywords, and basically follow the gcc upgrade
guide, since you probably need to udpate to gcc 4.1 anyway.
Advantages:
- It's relatively easy to see what things are going to be downgraded,
so you can decide what
[EMAIL PROTECTED] writes:
Printing failed as expected but nothing was produced in /tmp.
Adding #!/bin/bash -x
to the smbspool script and I don't see any output when running
lp file
I'm not sure the output would be visible from -x in my tty but I'm
guessing smbspool is not being called.
On 9/14/06, Daniel Iliev [EMAIL PROTECTED] wrote:
Mark Knecht wrote:
Hi,
I'm just wondering how one goes about creating higher/lower
priority Ethernet traffic on a home network. Is it possible?
Difficult?
SNIP
This could be accomplished by using a traffic shaper.
The package iproute2
Hi,
On Thu, 14 Sep 2006 15:01:01 +0200 (SAST) [EMAIL PROTECTED] wrote:
mrouted doens't work with 2.4 (according to docs)
What docs? Well, I see it being written in the ebuild, but given
that mrouted-3.9-beta3 is existing since June 1999, I don't think
it is actually true. Did you try
From: Richard Fish [EMAIL PROTECTED]
Subject: Re: [gentoo-user] Problem with compiling OpenOffice 2.0.3
Date: Wed, 13 Sep 2006 12:13:26 -0700
On 9/13/06, Meino Christian Cramer [EMAIL PROTECTED] wrote:
Same here
...and...does shortening the PORTAGE_TMPDIR path help?
-Richard
Nope.
mcc
On Thursday 14 September 2006 14:48, Daniel Iliev wrote:
Try this:
rm /usr/portage/metadata/timestamp.chk
emerge --sync
Unfortunately that didn't fix the problem.
Regards
Frank
--
gentoo-user@gentoo.org mailing list
Hi,
I decided I wanted to sell my Mac Mini as it's turned out to be
nothing but a glorified print server. (No one uses it including me.)
Anyway, I'm trying to move my HP printer from the Mac to my Gentoo box
using the Gentoo Printing Guide:
http://www.gentoo.org/doc/en/printing-howto.xml
On Thursday 14 September 2006 14:34, Frank Baumeister wrote:
whenever I run emerge it aborts with the following error message:
[SNIP]
pTraceback (most recent call last):
File /usr/bin/emerge, line 4049, in ?
emerge_main()
File /usr/bin/emerge, line 3770, in emerge_main
On 9/14/06, Frank Baumeister [EMAIL PROTECTED] wrote:
On Thursday 14 September 2006 14:48, Daniel Iliev wrote:
Try this:
rm /usr/portage/metadata/timestamp.chk
emerge --sync
Unfortunately that didn't fix the problem.
Regards
Frank
--
gentoo-user@gentoo.org mailing list
Hi Frank,
I went through the gcc upgrade and discovered that ssp no longer works
(suppose it was documented somewhere - but I missed it)
So I'm trying to reverse the upgrade process (this time using using a
hardened profile) and glibc won't allow me to downgrade.
How do I get around this, please?
On Thursday 14 September 2006 18:17, Drew wrote:
Hi Frank,
Daniel's solution was one suggested in an earlier thread. The other
was to delete your portage tree and reinstall it via web-rsync
followed by a regular sync. The problem has been documented and the
patch is supposed to work it's
Today I did the mistake of re-emerging
(emerge --update --deep --verbose --newuse world --pretend
) x11-base/xorg-x11-6.8.2-r8 as a result of a changed USE-flag
(GAPING_SECURITY_HOLE). Now when I try to do a new
emerge --update --deep --verbose --newuse world --pretend
I am getting a lot of
Hi,
When I logout of gnome it no longer asks me if I wish to save the
session and as a result I lose all my session data each time I logout.
Anyone know where this went? Is this an upstream Gnome issue or am I
missing some magical USE flag?
--
Alex, homepage: http://www.bennee.com/~alex/
Rumen Yotov wrote:
Hi,
On Wed, 13 Sep 2006 12:36:45 + (UTC)
James [EMAIL PROTECTED] wrote:
Ryan Tandy tarpman at gmail.com writes:
Michael Crute wrote:
USE=-* hardened pic ncurses ssl crypt berkdb tcpd pam perl
python readline
You could omit pic here IIRC (on
Hi,
I have been experiencing very slow https communication in both of my
~amd64 home Gentoo systems. No matter what browser I use (Opera,
firefox, firefox-bin, nautilus, konqueror) attempting to access a
secure site takes a very, very long time.
I do have ssl in my USE flags, maybe there is
TOA wrote:
[...HTML...]
Do not send HTML messages to this list, or any list. Please
configure your Thunderbird to produce plaintext mails.
Also, do not provide too much information. Just a bunch of lines
before the error message are usually enough for those who know this
stuff. Something
Hi,Do you use 'emerge xorg-x11' ?On 9/14/06, Benno Schulenberg [EMAIL PROTECTED]
wrote:TOA wrote:[...HTML...]Do not send HTML messages to this list, or any list.Please
configure your Thunderbird to produce plaintext mails.Also, do not provide too much information.Just a bunch of linesbefore the
On Thursday 14 September 2006 05:21, Dale wrote:
Cláudio Henrique wrote:
I didn't get what your problem is, but at home, after emerge -e world,
GDM decided not to work. upon further investigation, nvidia did not
load. so I had to recompile my kernel and then recompile
nvidia-drivers to
Helmut Jarausch jarausch at igpm.rwth-aachen.de writes:
GenToo (at least the 2006.1 livedvd) is driving me nuts.
I have tried several installations (more than 6) and they all
fail by e.g.
So, what can I do?
Hello Helmut,
It's a good thing I'm very stubborn, as I too have had troubles
On 9/14/06, A. R. [EMAIL PROTECTED] wrote:
Hi,I have been experiencing very slow https communication in both of my~amd64 home Gentoo systems. No matter what browser I use (Opera,firefox, firefox-bin, nautilus, konqueror) attempting to access asecure site takes a very, very long time.
I do have ssl
Hello,
We have several assembler/C programmers who currently use windows to develop
embedded software for microprocessors. I'd like to migrate those folks
to using Eclipse (or whatever) on Gentoo.
It'd be really wonderful if there was a BOOK showing C programmers (not
JAVA or any other OO
quoth the Mark Knecht:
and this
#Port 631
Port localhost:631
or this
Port 631
#Port localhost:631
Which of these do you have in your file? I found just yesterday that
Port 631
will work while:
Port localhost:631
does not...
HTH
-d
--
darren kirby :: Part of the problem since 1976
Hi!
When I logout of Gnome in Ubuntu (to start Gentoo *G*), I get the
following dialog: http://www.myimg.de/?img=gnomelogoutc2e.gif
That dialog has a lot more options than the dialog shown in Gentoo.
In Gentoo, I do not have Ruhezustand (Hibernate) and the dialog
looks a lot simpler.
What do I
Cron is sending out an email for jobs run as user root, but not for cron jobs run as my normal user? Yet the funny thing is, when cron runs jobs as normal user, it still actually sends the mail to root (see /etc/crontab). And on the command line, I see the same thing either way:
Sep 14 14:43:01
I think I've answered my own question:
On my system, gzip is the only package that contains the pic USE flag.
Looking at the ebuild, the pic USE flag is used to tell the system not
to use the assembler code optimizations.
Presumably, assembler code can't be relocated.
Thanks,
Brian
Brian
First things first, what version of Gnome is your Ubuntu screenshot from, and which version of Gnome in Gentoo are you using?DavidOn 9/14/06, Alexander Skwar
[EMAIL PROTECTED] wrote:
Hi!When I logout of Gnome in Ubuntu (to start Gentoo *G*), I get thefollowing dialog:
On 9/14/06, James [EMAIL PROTECTED] wrote:
Hello,We have several assembler/C programmers who currently use windows to developembedded software for microprocessors. I'd like to migrate those folksto using Eclipse (or whatever) on Gentoo.
Why? It'd be really wonderful if there was a BOOK showing C
The place you want to check is http://bugs.gentoo.orgOn 9/12/06, Meino Christian Cramer
[EMAIL PROTECTED] wrote:Hi, there are a few package, which do not compile after I did the step
to gcc-4.1.1. The third of those packages is: libdv-0.102 With -j3 set the output is: if /bin/sh ../libtool
On 9/10/06, Walter Dnes [EMAIL PROTECTED] wrote:
A few weeks ago, I got a new AMD machine, and I specified themotherboard that came with the Geforce 6150 video chip onboard.Iunderstand that hardware acceleration works with it.Separately, I also
ordered a PCHDTV card ( http://pchdtv.com ) and a PCI
How do you get power pitten to shutdown and power off Gentoo box
rob
--
gentoo-user@gentoo.org mailing list
I have had /home/gottlieb a symlink to /local/allan/gottlieb
for a while. Now I am having a problem because apache doenn't follow
symlinks by default (presumably due to some security concern).
As a test I did
rm /home/gottlieb
mkdir /home/gottlieb
mount --bind /local/allan/gottlieb
On Thu, 14 Sep 2006 14:43:30 -0700, David Grant wrote:
Cron is sending out an email for jobs run as user root, but not for cron
jobs run as my normal user? Yet the funny thing is, when cron runs jobs
as normal user, it still actually sends the mail to root
(see /etc/crontab).
You seem to be
On Thu, 14 Sep 2006 18:31:52 -0400, Allan Gottlieb wrote:
2. Assuming I want to go with mount --bind, how do I make it happen
during startup (I assume the mount is not preserved across
reboots). The man pages for fstab doesn't suggest that fstab is
the way to go. Do you put the
On 9/14/06, Neil Bothwick [EMAIL PROTECTED] wrote:
On Thu, 14 Sep 2006 14:43:30 -0700, David Grant wrote: Cron is sending out an email for jobs run as user root, but not for cron jobs run as my normal user? Yet the funny thing is, when cron runs jobs
as normal user, it still actually sends the
On 9/14/06, David Grant [EMAIL PROTECTED] wrote:
On 9/14/06, Neil Bothwick
[EMAIL PROTECTED] wrote:
On Thu, 14 Sep 2006 14:43:30 -0700, David Grant wrote: Cron is sending out an email for jobs run as user root, but not for cron jobs run as my normal user? Yet the funny thing is, when cron runs
Press and hold in for 3-5 seconds, that is a hard shutdown if it wont turn off
George
On 14/09/06, rob [EMAIL PROTECTED] wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
On 15/09/06, David Grant [EMAIL PROTECTED] wrote:
Is anyone else getting:
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients failed.
[EMAIL PROTECTED]
every time they send an email to [EMAIL PROTECTED]
--
David Grant
On Thu, 2006-09-14 at 18:17 -0400, rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
What happens now when you press the power button? What does your syslog
say?
First of all, you need an ATX motherboard. (Any motherboard newer than
about 7/8 or so years ago).
Michael Crute wrote:
Hmm... I seem to remember some problem with PHP only compiling if
threads was set to on. Maybe not, will have to test it to see if there
is any good reason that I still have that in my package.use. Thanks
for the tip.
-Mike
PHP and apache are not the same software.
I like it.
allan
--
gentoo-user@gentoo.org mailing list
On 9/14/06, darren kirby [EMAIL PROTECTED] wrote:
quoth the Mark Knecht:
and this
#Port 631
Port localhost:631
or this
Port 631
#Port localhost:631
Which of these do you have in your file? I found just yesterday that
Port 631
Same as your working version:
lightning ~ # cat
At Thu, 14 Sep 2006 20:44:04 -0400 Allan Gottlieb [EMAIL PROTECTED] wrote:
I like it.
Sorry, I meant to send that to the author Ben Reubenstein not to the
list.
allan
--
gentoo-user@gentoo.org mailing list
quoth the David Grant:
Is anyone else getting:
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients failed.
[EMAIL PROTECTED]
every time they send an email to [EMAIL PROTECTED]
I am. Seems D Cagnetta should unsubscribe...
-d
--
On 9/14/06, David Grant [EMAIL PROTECTED]
wrote:
Hmm, it turns out that setting MAILTO=root in my own user's crontab makes it send mail. MAILTO=root is already in /etc/cron/crontab by the way so this is all very strange.
I tried setting MAILTO=david and that didn't work. I decided ssmtp might
On 9/14/06, darren kirby [EMAIL PROTECTED] wrote:
quoth the David Grant: Is anyone else getting: This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed.
[EMAIL PROTECTED] every time they send an email to gentoo-user@gentoo.org?I am. Seems D
rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
# emerge sys-power/acpid
# rc-update add acpid default
# /etc/init.d/acpid start
and you're done! The default configuration for acpid includes a handler
for the power button event.
HTH.
--
On 9/14/06, Iain Buchanan [EMAIL PROTECTED] wrote:
On Thu, 2006-09-14 at 18:35 -0700, David Grant wrote: On 9/14/06, darren kirby [EMAIL PROTECTED] wrote: quoth the David Grant:
Is anyone else getting: This is an automatically generated Delivery Status Notification. Delivery to the following
Iain Buchanan wrote:
On Thu, 2006-09-14 at 18:17 -0400, rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
What happens now when you press the power button? What does your syslog
say?
First of all, you need an ATX motherboard. (Any motherboard newer
On 9/14/06, darren kirby [EMAIL PROTECTED] wrote:
SNIP
OK, I just tried lpq on my system (on a local terminal) and it works fine.
As it did on mine before I took down the Mac. I may as well try
turning the MAc on again this evening and see if this problem really
changes when it's on the
On Thu, 2006-09-14 at 18:53 -0700, David Grant wrote:
On 9/14/06, Iain Buchanan [EMAIL PROTECTED] wrote:
On Thu, 2006-09-14 at 18:35 -0700, David Grant wrote:
It seems the list should be set up in such a way that every
user
doesn't get one of those in
Hi folks,
Gentoo amd64
Gnome-light
What DVD/CD burning packages will you recommend to emerge on Gentoo
other than Gnomebaker and K3b. TIA
B.R.
SL
--
gentoo-user@gentoo.org mailing list
Hi,
For my new gentoo system I switched to the latest greatest profile -
2006.1. During the initial installation emerge told me glibc 2.4 is
nptlonly - so I turned on the nptl and nptlonly USE flags in make.conf.
Now my old linux system (profile 2006.0) tells me the same.
Sooo - i guess I would
My mail queue is chock full of messages that appear to be
error-reports from MAILER_DAEMON to the effect that some piece of mail
is undeliverable. The form of the messages is baffling to me, and I
cannot figure out what the original message was or where it came from.
All of the addresses seem
· David Grant [EMAIL PROTECTED]:
First things first, what version of Gnome is your Ubuntu screenshot from,
2.14.x
and which version of Gnome in Gentoo are you using?
2.14.x
Alexander Skwar
--
Can't open /usr/share/games/fortunes/fortunes.dat.
--
gentoo-user@gentoo.org mailing list
68 matches
Mail list logo
