trcmp(encrypted,"ab.h7fshjf89f")) {
printf("Fail\n");
} else {
printf("OK\n");
}
}
$ gcc -o xout x.c -lcrypt
$ ./xout
Running test
The same code runs fine on my desktop.
Any suggestions what
On 06/22/2016 12:31 PM, Neil Bothwick wrote:
> On Wed, 22 Jun 2016 08:39:59 -0500, Dan Douglas wrote:
>> --keep-going is in EMERGE_DEFAULT_OPTS so the problem is only when
>> that fails for whatever reason, --resume (with or without
>> --skip-first) always fails too.
> On 0
On Tue, Jun 21, 2016 at 10:04 AM, Neil Bothwick <n...@digimed.co.uk> wrote:
> On Tue, 21 Jun 2016 09:39:42 -0500, Dan Douglas wrote:
>
>> Is something misconfigured on my end or is this just a long-standing
>> bug? I at least need a way to either recover the list of packa
Hi. I don't believe I've ever seen portage's --resume --skipfirst
option work correctly without saying "invalid resume list". I know
this is incorrect because I've manually checked that all deps are
satisfied and it even occurs if a custom package I'm working on with
nothing depending upon it
---8<-
(in /usr/portage/distfiles/ there is a Nagios-Object-0.21.20.tar.gz file).
How can I convince g-cpan to use the 0.21.20 version and not '47'?
Or make g-cpan NOT to clean its temporarily created ebuild (so I can
modify it by hand)?
On 26.03.2016 17:37, Alan McKinnon wrote:
> On 26/03/2016 17:46, Dan Johansson wrote:
>> On my Raspberry Pi2 (running Gentoo of cause) I have a problem with
>> portage, or rather with emerge. When emerging something I get some error
>> messages about "shell-init:.
, but surprise surprise, just
before the error messages shows there is a "set +x" in the output, hence
I can not see which command it is that "produces" the error message and
I can also not see the path/file that is the culprit.
Any
I'm installing gentoo hardened on several machines all with btrfs root
filesystems, the simplest of which is a single gpt partitioned disk.
This is my current partitioning scheme (based on numerous conflicting
explainations on the wiki and handbook):
# gdisk /dev/sda -l
GPT fdisk (gdisk) version
On 25.03.2016 13:35, Dan Johansson wrote:
> I have setup one of my VM's to do cross-compiling for my Raspberry PI 2.
> Now some packages (e.g. app-editors/vim and its dependencies) emerges
> fine while other (e.g. net-misc/wget or rather one of its dependencies
> dev-libs/libpcre-
t is wrong)?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
smime.p7s
Description: S/MIME Cryptographic Signature
On 07.02.2016 00:13, Sam Jorna wrote:
> On 07/02/16 08:17, Dan Johansson wrote:
>> According to the news item from 2016-01-27 Apache 2.4 is soon about
>> to be "stabilized". In portage we have to versions, 2.4.16 &
>> 2.4.18, of Apache 2.4 available. Can so
t to
unmask that version on my development server to do some tests.
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
smime.p7s
Des
correct?
If it was just these error-messages I would not be that worried, but I
have started to get a lot of "hangers" on this rig when compiling larger
packages. Could there be a relation to the error-messages?
KR,
--
Dan Johansson, <http
On 2015-11-28 11:38, Alexander Kapshuk wrote:
On Sat, Nov 28, 2015 at 12:01 PM, Dan Johansson <dan.johans...@dmj.nu>
wrote:
I have started noticing the following messages in the dmesg output
(and in
the log-files) on my Gentoo rig:
I have been running memtest for some time (~100h) an
On 28.10.2015 20:48, J. Roeleveld wrote:
>
> The problem is that webapp-config now has the '-d' option as mandatory.
> This means installing into the webroot is not easy. (-d "" worked for me, but
> is annoying)
Yes, using -d "" did it, and yes it is annoying bu
On 26.10.2015 21:56, Mick wrote:
> On Monday 26 Oct 2015 20:38:18 Dan Johansson wrote:
>> The other day I noticed that the behavior of webapp-config has changed.
>> I have USE=vhost enabled and I have a directory structure where each
>> "app" is installed i
ew
0987654321 0 0 /var/www/app-1.int.dmj.nu/htdocs/.
Any suggestions on how to make the "new" webapp-config behave like the
"old" one (short of downgrading of cause)?
KR
--
Dan Johansson
***
This message is printed on 100% recycled electrons!
***
/amavisd start'.
OpenRC thinks that the service is running, since it doesn't really close
out normally, so the zap command resets it to a stopped state, allowing
you to start it normally after updating your rules files.
Hope that helps!
-Dan O.
signature.asc
Description: OpenPGP digital signature
/amd64/13.0/desktop/kde profile.
Any suggestions...
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
smime.p7s
Description: S/MIME
-plugins has it).
It works really well nowadays, it used to crash a lot in the past.
Highly recommended.
Em dom, 8 de mar de 2015 às 11:43, Dan Johansson dan.johans...@dmj.nu
escreveu:
Great, thanks for the tip - this works great.
I can now watch Videos without problem at FB and YT.
--
Dan
the BIOS shows) and some of the values that do show are wrong ,
some temp-sensor shows as negative (and my room is not THAT cold).
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons
On 01/08/2015 09:37 PM, Dale wrote:
Jc García wrote:
2015-01-08 11:02 GMT-06:00 behrouz khosravi bz.khosr...@gmail.com:
Hi. I was wondering that is it predictable that when qt5 and plasma 5 will
be unmasked?
Keep an eye on the bug-tracker for the unmasking of qt5[1] or hang
around the
On 01/09/2015 02:20 PM, behrouz khosravi wrote:
There is definitely a ton to unmask, and if you want kde4 alongside
there are some USE flags to mess around with. I don't really remember
which anymore, but portage should give some hints.
I don't use SDDM, it looked nice, but I like LightDM
On 01/09/2015 01:15 PM, behrouz khosravi wrote:
I couldn't stop myself anymore! Right now I am trying to get Plasma 5 on
my machine.
This is not easy though. I just hope I wont break anything critical!
I am trying to install SDDM for the fisrt step.
There is definitely a ton to unmask,
a user-made tool. If you look at code
examples for this call, it's not terribly difficult to use at all.
Actually, I wonder if the tool this user is using pulls the wrong
field and calls it 'year'.
--
Dan Oriani
redchops.com
(Website perpetually under construction)
signature.asc
Description: Digital
On Wed, Jul 16, 2014 at 12:02:16PM +1000, Paul Colquhoun wrote:
On Tue, 15 Jul 2014 10:02:18 Dan Oriani wrote:
On Mon, Jul 14, 2014 at 10:04:36PM +0100, Stroller wrote:
On Mon, 14 July 2014, at 6:54 pm, meino.cra...@gmx.de wrote:
I am running Gentoo Linux, which I update on a ~daily
On Thu, Jul 10, 2014 at 09:55:53PM +0200, J. Roeleveld wrote:
On 9 July 2014 07:18:27 CEST, Dan O. d...@redchops.com wrote:
I don't believe you pasted everything you meant to. That paste doesn't
show what packages would need to be emerged.
Please do not top post.
--
Sent from my Android
I don't believe you pasted everything you meant to. That paste doesn't
show what packages would need to be emerged.
--
Dan Oriani
redchops.com
(Website forever under construction)
On Wed, 9 Jul 2014, List Reader wrote:
Hello again kind friends, I'm not sure how to resolve the requirements
Hi List,
I am considering buying a new Notebook and found that a LENOVO IdeaPad
Z510 would fit into my budget and seems quite OK.
Does anyone here on the list have any experience with the Z510 running
dual-boot (Win8.x and Gentoo) that would like to share their experience?
Regards,
--
Dan
it exists (even when superseded by new toys, i.e. older
IDE/ATA/ATAPI options vs newer PATA options).
But if you press 1 in the example above you will jump directly to
the menu item. Clue -- (1)
Regards,
--
Dan Johansson
***
This message is printed
On 13.11.2013 06:22, Linlin Yan (颜林林) wrote:
On Sun, Nov 10, 2013 at 6:00 PM, Dan Johansson dan.johans...@dmj.nu wrote:
On 10.11.2013 09:20, Linlin Yan (颜林林) wrote:
Is it possible to set dynamic service run-level (rc-update) according to
different kernel version.
There are different kernel
not have in the default
level). Then I have added softlevel=kde to the parameters for the kernel.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons
not in
the position to extend / to engulf all the data in /usr.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
0x2FB894AD.asc
Description: application
On 30.09.2013 20:09, Mark David Dumlao wrote:
Peeps using LVM:
If, right now, you were forced to boot into /, without /usr, would you
be able to manually assemble your usr using pv/vg/lv tools - without
the assistance of udev?
Sure can!!!
--
Dan Johansson, http://www.dmj.nu
: NPObject proxy 0x7f33d3c27de0 is no
longer valid!
(The last line just keeps repeating)
Any suggestions what my problem could be and how to solve it?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons
a year in an overlay, and then it took more than two years to
make it an official alternative to OpenRC. The /usr merge will take a
similar amount of time, if not longer.
And when we are at it, why not rename '/' to 'C:\' ?
--
Dan Johansson, http://www.dmj.nu
the CFLAGS to -mtune=native and recompile the affected SW (or world).
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
0x2FB894AD.asc
Description: application
of the warnings went away when I changed the version string in
syslog-ng.conf to @version: 3.4.
Just my 2 cents (€)
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons
a link to some good documentation on how to upgrade a
3.2 configuration to 3.4?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
0x2FB894AD.asc
to have a stable SAN infrastructure is the
servers on it (Multipathing, partition alignment, queue depth, ...)
according to the storage vendors recommendation.
LUN expansion/shrink is storage vendor specific, some can not (netapp
apparently) but others can.
Just my 2 cents.
Regards,
--
Dan
Hello List,
What is the status of using mdev (instead the ever growing udev) together
with lvm2?
Reason for my question is that at https://wiki.gentoo.org/wiki/Mdev it says
One beta tester reports getting close with lvm2, but it's not there yet..
Regards,
--
Dan Johansson, http://www.dmj.nu
On Sunday 07 April 2013 13.47:55 Alan Mackenzie wrote:
Hi, Dan.
On Sun, Apr 07, 2013 at 02:34:16PM +0200, Dan Johansson wrote:
Hello List,
What is the status of using mdev (instead the ever growing udev)
together with lvm2? Reason for my question is that at
https://wiki.gentoo.org
, but portage still wants to pull in virtual/modutils and sys-apps/kmod (and
I have nothing depending on either of those two).
At the moment I am looking into mdev instead of udev for these servers.
If you open a bug please post the bug# here.
--
Dan Johansson, http://www.dmj.nu
On Saturday 23 March 2013 15.06:05 Mike Gilbert wrote:
On Sat, Mar 23, 2013 at 1:42 PM, Dan Johansson dan.johans...@dmj.nu wrote:
Hello,
Some of my servers are running with a kernel without module-support.
On these servers something has started to pull in sys-apps/kmod, which when
/modutils
* These packages depend on virtual/modutils:
Can someone explain to me why these two are getting re-emerged (nothing seems
to depend on them and I have previously unmerged them)?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message
On Saturday 16 March 2013 12.08:23 Canek Peláez Valdés wrote:
On Sat, Mar 16, 2013 at 11:03 AM, Dan Johansson dan.johans...@dmj.nu wrote:
On Saturday 16 March 2013 09.39:17 Jonathan Callen wrote:
Hello,
Today I upgraded udev on one of my boxes (after hesitating a long
time). Even
tables and
firewall rules).
Any suggestion how to keep my old names and order?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***80-net-
(sshd, ntpd, ...) that is using
the network I get a lot of complains that eth0 and eth1 is not started (and can
not be started) and the service wont start.
What have I missed???
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message
On 02/23/13 17:07, Dale wrote:
Volker Armin Hemmann wrote:
Am 23.02.2013 10:28, schrieb Dan Hunter:
no
Double no. Next he will try the unsubscribe in the subject line angle
with little success there either. Then someone will post the nice long
reply about the unsubscribe kit and all its
into the
kernel? shorewall-init.log does not indicate any problems and I have
LOG_VERBOSITY=2 in shorewall.conf which is the maximum.
I hade the same problem. Using shorewall trace restart I could figure
out which chain/target/match that was missing.
Regards.
--
Dan Johansson, http://www.dmj.nu
?
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
of the icons/widgets.
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
On Sunday 18 November 2012 10.55:01 Dan Johansson wrote:
Hi,
Yesterday I
something like this.
I still have /usr in fstab (with the noauto option) just for reference.
The only thing (that I have noticed yet) is that the /etc/init.d/lvm fails due
to the fact that LVM is already started (in initramfs).
--
Dan Johansson, http://www.dmj.nu
like I want it).
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
On Saturday 14 April 2012 12.01:13 Dan Johansson wrote:
Yesterday I did the upgrade of KDE (4.7.4 - 4.8.1) on my stable
workstation.
Now the new tab button in Konsole opens a new tab with the _default_
profile instead of opeing a new tab with the _current_ profile like it did
before
ectrons!
***
On Thursday 05 April 2012 00.36:33 Neil Bothwick wrote:
On Wed, 04 Apr 2012 18:58:38 +0200, Dan Johansson wrote:
I have a similar thing on my ~x86, but the difference is that I know
why I get it. I have successfully be able
issues are solved I'm going to let my system update udev.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
dropped 20 overruns 0 frame 0
TX packets 143 bytes 24546 (23.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
And my wireless connection works!
Anny suggestions what's wrong?
Regards,
--
Dan Johansson, http://www.dmj.nu
On Sunday 26 February 2012 10.52:58 Willie WY Wong wrote:
On Sun, Feb 26, 2012 at 11:34:01AM +0200, Penguin Lover Alan McKinnon
squawked:
On Sun, 26 Feb 2012 10:19:56 +0100
Dan Johansson dan.johans...@dmj.nu wrote:
After running an update yesterday (about 50 packages) on my ~x86
/netmount
I am not sure how it got into the default run level, since I don't use
any network file systems on my netbook.
And on my laptop the culprit seems to be /etc/init.d/sshd
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100
On Sunday 26 February 2012 17.52:13 Dan Johansson wrote:
On Sunday 26 February 2012 15.19:54 Willie WY Wong wrote:
On Sun, Feb 26, 2012 at 10:35:35AM +0100, Penguin Lover Willie WY Wong
squawked:
Can someone help me figure out how to find the offending initscript
On Sunday 26 February 2012 13.43:13 Dan Johansson wrote:
On Sunday 26 February 2012 10.52:58 Willie WY Wong wrote:
On Sun, Feb 26, 2012 at 11:34:01AM +0200, Penguin Lover Alan McKinnon
squawked:
On Sun, 26 Feb 2012 10:19:56 +0100
Dan Johansson dan.johans...@dmj.nu wrote:
After
choose (which is more up to date). I am mainly
using NFSv4.
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
Alright, so...
I haven't mentioned it up until now because I didn't feel it would have any
bearing on the problem, but the installation in question is a VirtualBox
guest operating system running on a Windows host.
Since I didn't have any particular attachment to the installation, I
decided to
On Wed, Jan 4, 2012 at 3:17 AM, YoYo Siska y...@gl.ksp.sk wrote:
On Tue, Jan 03, 2012 at 08:31:08PM -0800, Dan Cowsill wrote:
Hey list,
A little while after I compiled Gnome and got things running, I lost the
ability to add scripts to the default runlevel. I can run rc-update add
xdm
Hey list,
A little while after I compiled Gnome and got things running, I lost the
ability to add scripts to the default runlevel. I can run rc-update add
xdm default, for example, and the xdm symlink will appear in
/etc/runlevels/default, and that symlink will indeed point to
/etc/init.d/xdm,
On Sun, Dec 25, 2011 at 11:08 AM, CJoeB colleen.bea...@gmail.com wrote:
Happy Holidays, Everyone,
To lead into the problem I am experiencing, I will let you know about an
issue I've been having with my desktop (writing this from my laptop).
Every once in a while, when the screensaver kicks
are adapted to very harsh cold climates.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
not set any
special parameters for these skipped folders. All my messages and folders
reside on a local IMAP-server (courier).
Any suggestion why some folders are skipped and where to look for a solution.
Regards,
--
Dan Johansson, http://www.dmj.nu
backend.
For me this workaround works.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
needs to be on /.
Just my 2 cents.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
be the correct way to resolve this issue?
I am a little bit afraid to start unmerging any of these packages as among
other things sys-boot/grub depends on some of them.
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100
-On Saturday 03 September 2011 12.31:01 Mick wrote:
On Saturday 03 Sep 2011 10:17:19 Dan Johansson wrote:
Since some time I am getting the following errors while doing update
world on my dektop machine (running amd64 stable):
-8
On Sunday 21 August 2011 20.26:40 Dan Johansson wrote:
Hi,
I need some help with writing udev-rules for capi.
After playing around some I decided to ask for help here as can't really
get it to work.
What I want ist the following:
/dev/capi20 68,0
/dev/capi/capi# 191,#
68,0 = Major
) tell my what I am doing wrong?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
it.
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
-sites open-iscsi seems dead, last update of web-site
2005 and latest release from July 2009.
iscsitarget does not look much better - latest release July 2010.
So, what are you using and are you happy with it?
Regards,
--
Dan Johansson, http://www.dmj.nu
)
/export/diskless/abba
abba.dmj.nu(rw,nohide,insecure,no_root_squash,no_subtree_check,sync)
I also have other FS exported like this e.g.:
torsson# grep dan /etc/fstab
/dev/vg00/lvol05/home/dan reiserfsnoatime 0 2
/home/dan/tmp /export/Queen/tmp none
Hey list,
I noticed a little while ago that virtualbox-bin came with an init script
and decided to try it out. Trouble is, the script starts a virtualbox VM
just fine, it just can't stop one. Check out /etc/conf.d/virtualbox.my-vm:
# Username to start vbox as, must be part of vboxusers group.
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
On Wed, Apr 20, 2011 at 10:19 PM, Michael Orlitzky mich...@orlitzky.comwrote:
On 04/20/2011 12:15 PM, Dan Cowsill wrote:
On Wed, Apr 20, 2011 at 8:55 AM, Michael Orlitzky mich...@orlitzky.com
mailto:mich...@orlitzky.com wrote:
On 04/20/2011 11:35 AM, Dan Cowsill wrote:
Hi list
Hi list,
I've been having a strange issue every so often. I'll do a world update
(emerge -uDNav, etc) and that will proceed nicely, installing new packages
and suchlike. I'll then do a little bit of the old emerge -pcv to check for
dangling packages and I will get the following:
!!! You have
On Wed, Apr 20, 2011 at 8:55 AM, Michael Orlitzky mich...@orlitzky.comwrote:
On 04/20/2011 11:35 AM, Dan Cowsill wrote:
Hi list,
I've been having a strange issue every so often. I'll do a world update
(emerge -uDNav, etc) and that will proceed nicely, installing new
packages
On Wed, Apr 20, 2011 at 9:15 AM, Dan Cowsill danthe...@gmail.com wrote:
On Wed, Apr 20, 2011 at 8:55 AM, Michael Orlitzky mich...@orlitzky.comwrote:
On 04/20/2011 11:35 AM, Dan Cowsill wrote:
Hi list,
I've been having a strange issue every so often. I'll do a world update
(emerge
On Wed, Apr 20, 2011 at 10:15 AM, Daniel Wagener st...@gmx.net wrote:
Have you ever looked at the size world or maybe even into it?
World file contains a list of the packages I've installed. Nothing new
there. It's about 1.5kb in size.
Can someone send me the specific e-mail address to be de listed from the group?
Thanks.
Dan Blum
On Thursday 14 April 2011 03.12:34 Michael Orlitzky wrote:
On 04/13/2011 02:42 PM, Dan Johansson wrote:
I know this is Off-topic but I also know there are a lot of smart people
lurking on this list.
I have a PHP-script that does not run from a web-server but directly in a
shell. When I
at ~96MB. The host has
enough RAM (32GB) to support the script.
Any suggestions on how to solve the issue (short of rewriting the script in C
or C++)?
Regards,
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled
to 2.4.23?
--
Dan Johansson, http://www.dmj.nu
***
This message is printed on 100% recycled electrons!
***
On Sunday 20 February 2011 13.25:31 Dan Johansson wrote:
Today after updating openldap from 2.4.23 to 2.4.24, slapd will not start.
# /etc/init.d/slapd start
* Starting ldap-server
Nikos,
Thanks for the help. My system is looking for the i915 module. Would you know
where the module needs to be?
Thanks.
Dan
--- On Tue, 1/18/11, Nikos Chantziaras rea...@arcor.de wrote:
From: Nikos Chantziaras rea...@arcor.de
Subject: [gentoo-user] Re: xorg 1.9
To: gentoo-user
I upgraded my xorg from 1.76 to 1.9 yesterday, including downloading the most
recent drivers. When the new system did not work, I checked the xorg log
(attached) and I thought that the problem was the mode setting. So in the
kernel, I enabled the modesetting by default and now the card does not
On Sunday 05 December 2010 10.02:48 Mick wrote:
On Saturday 04 December 2010 19:27:57 Dan Johansson wrote:
Today I emerged mysql, apache, PHP5, phpmyadmin and joomla on a Laptop
(~x86) to be able to play a bit with Joomla. But I can not get phpmyadmin
or Joomla to work (both with the same
Segmentation
fault (11)
I've had a look at bugs.gentoo.org but could not find anything with php-5.3.3
or Apache-2.2.16 (just with older versions of php and Apache).
Any suggestions on where to start to search for a solution or still better a
solution?
--
Dan Johansson, http://www.dmj.nu
On Monday 08 November 2010 20.18:22 Sebastian Beßler wrote:
Am 08.11.2010 15:02, schrieb Dan Johansson:
Hi,
After updating from dev-lang/perl-5.8.8-r8 to dev-lang/perl-5.12.2-r2
I am no missing the suidperl binary. Some of my perl scripts _need_
this feature. Any suggestion on how
On Wednesday 10 November 2010 18.17:19 Stroller wrote:
On 8/11/2010, at 2:02pm, Dan Johansson wrote:
...
After updating from dev-lang/perl-5.8.8-r8 to dev-lang/perl-5.12.2-r2 I am
no missing the suidperl binary. Some of my perl scripts _need_ this
feature. Any suggestion on how
Hi,
After updating from dev-lang/perl-5.8.8-r8 to dev-lang/perl-5.12.2-r2 I am no
missing the suidperl binary. Some of my perl scripts _need_ this feature. Any
suggestion on how to be able to execute perl-scritps suid (except downgrade
to 5.8.8).
Regards,
--
Dan Johansson, http://www.dmj.nu
On 15/10/2010 10:47 AM, Mike Diehl wrote:
On Friday 15 October 2010 11:40:34 am Florian Philipp wrote:
Instead of your brute-force yes to all approach, newer kernels also
support `make localyesconfig` which takes all modules currently used in
the running kernel and compiles them into the new
On Sunday 10 October 2010 20.08:26 walt wrote:
On 10/10/2010 07:05 AM, Dan Johansson wrote:
I know this is of topic, but this is one of the few lists where you mostly
get a competent answer.
I have a small problem with libvirt / qemu. I have created a guest (also
gentoo) on a gentoo
101 - 200 of 1023 matches
Mail list logo
