Thanks, I did some research and I've decided to get a 939 with an
a64fx 3500+ in an asus a8n sli deluxe, I already have a 600w power
bestexpress supply, guess that will do the deal, I'll stick with my
old nvidia graphic card till I get money to get a new board (probably
pci-e), I guess all my
Daniel da Veiga wrote:
Thanks, I did some research and I've decided to get a 939 with an
a64fx 3500+ in an asus a8n sli deluxe,
I have 3200+ with a8n-sli deluxe, and I'm a little dissapointed
with that motherboard:
- terrible bios!
e.g.: you set memory frequency (ddr400), then change
Volker Armin Hemmann wrote:
On Sunday 17 July 2005 00:55, Zac Medico wrote:
Volker Armin Hemmann wrote:
but there is enough stuff out there, that does not work with ntpl.
So recommending ntplonly is irresponsible.
No problems here. I'd expect people to do their own research
Zac Medico wrote:
Dave S wrote:
Hi all,
gphoto2 used to work well with my Kodak DX6340 camera. I recently did a
emerge -uDv and loads of version numbers have been bumped since I last
did an upgrade, some 8ish months ago.
Anyhow having sorted the access permission problem It appears that
Hi all,
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only happens when unlocking
On Sunday 17 July 2005 09:38, Jarry wrote:
Just my 2 cents. I have been using asus-products for about 7 years,
but I think asus is not the hardware-producer it used to be. Asus
still makes excelent mobo's for Intel, but its mobo's for AMD64
are... well, imho only average. Nothing more,
On Sunday 17 July 2005 10:49, Richard Fish wrote:
Volker Armin Hemmann wrote:
On Sunday 17 July 2005 00:55, Zac Medico wrote:
Volker Armin Hemmann wrote:
but there is enough stuff out there, that does not work with ntpl.
So recommending ntplonly is irresponsible.
No problems here. I'd
I just emerged KDE, changing from the monolytic packages to the split
ones.
Now windows redrawing is painfully (and cas-ca-ding) slow.
The problem seems to be the same as in
http://forums.gentoo.org/viewtopic-t-344889-highlight-kde+slow+redraw.html
(but no answer there...)
Any idea?
--
Jorge
Hello all,
My scanner was working OK till I did a 'emerge -uDv world'. xsane now
picks up my logitech webcam instead of my scanner and does not see my
scanner.
In root xsane sees both devices, asks me which one to use and all is OK,
so its a permissions problem.
vanda_comp dave # lsusb
Bus
During the shutdown Gentoo brings down my eth0
connection, but my computer is connected to a router
that uses xDSL for connection, so my questions is:
Can I remove this, this way I won't have to reconnect
my xDSL connection? Or this shouldn't interfer in my
connection I I'm having to reconnect
Hello!
I'd looking for a way to resize my reiser4 filesystems.
Best would be an online option (ie. one, that does
not require an unmount of the fs).
In older packages, I found a man page for a resize_reiser4
tool (not sure about the name). Even this manpage is gone
in sys-fs/reiser4progs-1.0.4,
E. Pereira schreef:
During the shutdown Gentoo brings down my eth0
connection, but my computer is connected to a router
that uses xDSL for connection, so my questions is:
Can I remove this, this way I won't have to reconnect
my xDSL connection? Or this shouldn't interfer in my
connection I
On 00:03 Sat 16 Jul , Richard Fish wrote:
Bill Roberts wrote:
Richard
I tried all of your suggestions, without success. See inline comments:
Note device and monitor section of xorg.conf at end:
I've had one further idea. I have a 4-port kvm switch (Cybex), it has
never
Hi all, Ie been looking at thee gentoo wiki and internet to find out
what my problem is but can't find it any where.
I installed splash_utils and make the right kernel options and when I
try to run splash_util -c on I got this error message
FBIOSPLASH_SETSTATE failed, error code 22. Does someone
On Sun, 17 Jul 2005 11:12:13 -0300 (ART)
E. Pereira [EMAIL PROTECTED] wrote:
During the shutdown Gentoo brings down my eth0
connection, but my computer is connected to a router
that uses xDSL for connection, so my questions is:
Can I remove this, this way I won't have to reconnect
my xDSL
Hi,
I run a dual-boot linux system. One is kernel 2.4 (in order to use
Win4Lin 4) and the other is kernel 2.6
I have an emerge problem with my 2.4 kernel. After emerge sync, when I
perform an emerge -up world, I do not see any packages requiring update.
When I start checking individual
Hi,
what happens with the command
emerge --deep --update --newuse world
and what's in your world file? (/var/lib/portage/world)
Cheers,
Mark
On 7/17/05, Jeff Cranmer [EMAIL PROTECTED] wrote:
Hi,
I run a dual-boot linux system. One is kernel 2.4 (in order to use
Win4Lin 4) and the
Allan Spagnol Comar schreef:
Hi all, Ie been looking at thee gentoo wiki and internet to find out
what my problem is but can't find it any where.
I installed splash_utils and make the right kernel options and when I
try to run splash_util -c on I got this error message
FBIOSPLASH_SETSTATE
I am using splashutils 1.1.9.7 and livecd-2005.1, and genkernel 3.2.5
works very well with all the stuff. So I think you can find the
solution inside the genkernel scripts.
--
Yuan MEI
--
gentoo-user@gentoo.org mailing list
Hi,
I would like to generate the documentation from the alsa-drivers.
While trying to generate it, openjade tells me this:
openjade:E: cannot open /usr/share/sgml/CATALOG.docbook_4 (Datei
oder Verzeichnis nicht gefunden)
I googled around but I found it only with rpm-distributions like Suse
Jorge Almeida wrote:
I just emerged KDE, changing from the monolytic packages to the split
ones.
Now windows redrawing is painfully (and cas-ca-ding) slow.
The problem seems to be the same as in
http://forums.gentoo.org/viewtopic-t-344889-highlight-kde+slow+redraw.html
(but no answer there...)
Robert Cernansky wrote:
RF
RF For a complete list of packages that should be rebuilt, you can run:
RF
RF equery belongs `ldd /usr/sbin/smbd | grep ' /' | awk '{print $3}'` |
RF sort | uniq
RF
RF This will print the name of every package that contains a library that
RF smbd depends upon.
RF
Dave S wrote:
Hello all,
My scanner was working OK till I did a 'emerge -uDv world'. xsane now
picks up my logitech webcam instead of my scanner and does not see my
scanner.
In root xsane sees both devices, asks me which one to use and all is OK,
so its a permissions problem.
vanda_comp
Alexander Kirillov wrote:
Hi all,
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This
Zac Medico wrote:
Linuxthreads are the *old* linux threading library and nplt
is the *new* linux threading library. I've been using
nptlonly for a couple months now with no noticeable problems.
AFAICT it's a drop in replacement for linuxthreads and it
supposed to give superior
Allan Spagnol Comar wrote:
Hi, I am using kernel 2.6.12-r4 ans splashutils 1.1.9.7, I had tried
emergence and livecd-2005.0 themes and none had worked :(
Check your kernel config and see if you've used vesafb-tng. Also, set
the resolution for vesafb-tng the same as the resolution of your
On Sun, 17 Jul 2005 10:45:00 -0700 Zac Medico [EMAIL PROTECTED] wrote:
ZM Robert Cernansky wrote:
ZM So I decide to downgrade glibc first, but it did not help. Then I
downgrade
ZM linux-headers and re-emerge (downgraded) glibc and samba (for sure). Again
ZM without success. :-( I removed
I tried to use bouth vesafb and vesafb-tng, in tng I used the same
resolution as the theme agian neather one of then worked
On 7/17/05, Mrugesh Karnik [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Hi, I am using kernel 2.6.12-r4 ans splashutils 1.1.9.7, I had tried
emergence and
As I told before my system gives me
WARNING **: oss_open(): Failed to open audio device
(/dev/sound/dsp): No such file or directory
when I try to play audio.
So I took a peek in my system and discovered, while
trying to install alsa-driver, that ALSA is already
compiled into my kernel. So what
Robert Cernansky wrote:
Great idea with this livecd. I just replaced /usr/lib64/gconv/IBM852.so
with that one from livecd and it works! When I'll have more time I'll try
to rebuild toolchain as you suggested. Thank You.
Robert.
Great! Actually, I meant to say stage3 instead of livecd.
E. Pereira wrote:
As I told before my system gives me
WARNING **: oss_open(): Failed to open audio device
(/dev/sound/dsp): No such file or directory
when I try to play audio.
So I took a peek in my system and discovered, while
trying to install alsa-driver, that ALSA is already
compiled
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only happens when unlocking a
Alexander Kirillov wrote:
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only happens when unlocking a
On Sat, 16 Jul 2005, Walter Willis wrote:
# ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.3.1/K2.6.12-gentoo (netkey)
Checking for IPsec support in kernel
Alexander Skwar wrote:
Hello!
I'd looking for a way to resize my reiser4 filesystems.
Best would be an online option (ie. one, that does
not require an unmount of the fs).
In older packages, I found a man page for a resize_reiser4
tool (not sure about the name). Even this manpage is gone
in
Alexander Kirillov wrote:
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only
Hi there,
When I emerged libraw1394 it tells me there is no /dev/raw1394 device:
Required /dev/raw1394 device file not found.
Run 'make dev' to create it.
which is correct:
[EMAIL PROTECTED] ~ $ ls
On Sunday 17 July 2005 22:35, Mark Knecht wrote:
which would have made the device. Is the fact that the device isn't
created a problem with the ebuild? Even if it was, how should this
really be created for a udev system? A rule somewhere in some
udev.conf file?
Dynamic dev filesystems (devfs
Mike Williams wrote:
On Sunday 17 July 2005 22:35, Mark Knecht wrote:
which would have made the device. Is the fact that the device isn't
created a problem with the ebuild? Even if it was, how should this
really be created for a udev system? A rule somewhere in some
udev.conf file?
Dynamic
Hi,
Mark Knecht wrote:
which would have made the device. Is the fact that the device isn't
created a problem with the ebuild? Even if it was, how should this
really be created for a udev system? A rule somewhere in some
udev.conf file?
Its a kernel bug which is fixed in 2.6.12. If you
Zac Mike,
Thanks for the responses. I am getting a device /dev/raw/raw1394
created when I load the module and removed when I rmmod the module:
godzilla ~ # ls -la /dev/raw
ls: /dev/raw: No such file or directory
godzilla ~ # modprobe raw1394
godzilla ~ # ls -la /dev/raw
total 0
drwxr-xr-x 2
Daniel,
See my other post on this thread but as for the kernel it is updated:
[EMAIL PROTECTED] ~ $ uname -a
Linux godzilla 2.6.12-gentoo-r4 #1 Sat Jul 16 09:29:59 PDT 2005 i686
AMD Athlon(TM) XP1600+ AuthenticAMD GNU/Linux
[EMAIL PROTECTED] ~ $
Thanks,
Mark
On 7/17/05, Daniel Drake [EMAIL
Kb layout switch in session unlock screen
doesn't work for me after upgrade to kde 3.4
When kde session locks on timeout
and the keyboard happens to be left in non-english layout
I can't switch it back to en and have to kill X
to get things back to normal.
This only happens when unlocking a
On 7/17/05, Daniel Drake [EMAIL PROTECTED] wrote:
Hi,
Mark Knecht wrote:
which would have made the device. Is the fact that the device isn't
created a problem with the ebuild? Even if it was, how should this
really be created for a udev system? A rule somewhere in some
udev.conf file?
Mark Knecht wrote:
What's throwing me is that the libraw1394 emerge makes this limited complaint:
Required /dev/raw1394 device file not found.
Run 'make dev' to create it.
This is more suited for the
AFAIK, and according to the README in the reiser4progs, Reiser Co have
not gotten around to implementing the resizer for reiser4.
So, for an 'offline' option, backup, resize, reformat, restore
Since practically all my partitions are LVM, not being able to resize
really takes reiserfs4
Hi all,
Here in Australia the internet access plan I have is capped at 12GB
downloads/month during peak hours and then an additional 24GB/month during
offpeak hours, ie 2am - 9am. Rather than sit up until 2am to kick off a
download, I was wondering if it was possible to somehow throttle a
Checkout the QOS modules in the kernel and the iproute package. There's
plenty of examples on the net as well as mailing lists and bundled
scripts that will serve as a base for what you want to do.
Also rsync and wget have bandwidth limiting options that may be
easier/more suitable for what you
Hi guys, does anyone know any way to resize a ext3 partition? i'm trying
QTparted (parted) and i can't... when i try with qtparted it just does
not let me resize it, and with parted (text mode) it complains:
br ~ # parted /dev/hdb resize 1
Start? [32kB]?
On Sunday 17 July 2005 18:32, Bob Sanders wrote:
btw - my recommendation of PC Power Cooling power supplies is not
because there are no others as good, it's that I've had more fails and seen
more fails with other brands.
ok, I do not now PC Power Cooling, but I've had a couple of PSUs so
wget has a throttling option --limit-rate
how about :
1. keep a file containing the urls of the files you want to download.
(dllist)
2. start them at whatever time like:
wget --limit-rate=5k -i dllist
3. use at to run a script at 2.00 am which kills wget and restarts it
with no limit-rate
Bruno Gola wrote:
Hi guys, does anyone know any way to resize a ext3 partition? i'm trying
QTparted (parted) and i can't... when i try with qtparted it just does
not let me resize it, and with parted (text mode) it complains:
br ~ # parted /dev/hdb resize 1
Start? [32kB]?
Zac Medico wrote:
Bruno Gola wrote:
Hi guys, does anyone know any way to resize a ext3 partition? i'm trying
QTparted (parted) and i can't... when i try with qtparted it just does
not let me resize it, and with parted (text mode) it complains:
br ~ # parted /dev/hdb resize 1
Start?
Bruno Gola wrote:
About the cd-writer, ive tried with cdrecord (command line) but, it
stills stop.. i dont know what could it be.. any idea?
What output does cdrecord give before it stops? Does cdrecord actually exit or
does it just hang? Try it with the -v option.
Zac
--
Zac Medico wrote:
Bruno Gola wrote:
About the cd-writer, ive tried with cdrecord (command line) but, it
stills stop.. i dont know what could it be.. any idea?
What output does cdrecord give before it stops? Does cdrecord
actually exit or does it just hang? Try it with the -v option.
Bruno Gola wrote:
Zac Medico wrote:
Bruno Gola wrote:
About the cd-writer, ive tried with cdrecord (command line) but, it
stills stop.. i dont know what could it be.. any idea?
What output does cdrecord give before it stops? Does cdrecord
actually exit or does it just hang?
The emerge --deep command did throw up a few others.
[ebuild U ] sys-devel/binutils-config-1.8-r4 [1.8-r2]
[ebuild U ] media-sound/alsa-headers-1.0.9b [1.0.8]
[ebuild U ] media-sound/alsa-driver-1.0.9b [1.0.8]
[ebuild U ] media-libs/alsa-lib-1.0.9 [1.0.8]
[ebuild U ]
Okay, thanks, that helps clarify it. I got the printer working anyway --
my printers.conf needed manual editing -- it had two different lp0
printers in it somehow, one of them badly mangled.
++ kevin
On 7/15/05, Edward Catmur [EMAIL PROTECTED] wrote:
On Fri, 2005-07-15 at 08:30 -0700, Kevin
Enabling splash in the kernel causes text to start a 1/3 of the way over on the
screen and wraps around (after decompressing kernel). Hardly legible and no
splash image to be seen, nvidia module will not load (no screens found error)
and editing files is difficult due to this shifted display
Allan Spagnol Comar wrote:
I tried to use bouth vesafb and vesafb-tng, in tng I used the same
resolution as the theme agian neather one of then worked
Are you trying Gensplash or Bootsplash?
--
gentoo-user@gentoo.org mailing list
Sean Johnson wrote:
AFAIK, and according to the README in the reiser4progs, Reiser Co have
not gotten around to implementing the resizer for reiser4.
So, for an 'offline' option, backup, resize, reformat, restore
Since practically all my partitions are LVM, not being able to
[EMAIL PROTECTED] wrote:
Enabling splash in the kernel causes text to start a 1/3 of the way over on the
screen and wraps around (after decompressing kernel). Hardly legible and no
splash image to be seen, nvidia module will not load (no screens found error)
and editing files is difficult due
63 matches
Mail list logo