I am using alsa-driver-1.0.10
You don't need the alsa-driver package, except you own very recent
hardware and teh kernel-built-in drivers don't support it yet.
What card do you want to drive?
Best regards
ce
--
gentoo-user@gentoo.org mailing list
Hi Walter,
My machine automatically connects during boot, and this works
great. When I shutdown the machine, I get an error that adsl
doesn't seem to run.
I have a combined ADSL modem/router that logs on and coverts ADSL
into ethernet. The only difference from ordinary LANs is that I
Christoph Eckert wrote:
thanks for the hint, but my ethernet card is directly connected to the
ADSL modem. Furthermore it worked perfectly until I did some emerge
--update world. I guess I haven't been carefully enough when running
etc-update :( .
Anyone some further hints?
Best
Yersterday I tried another video card, and everything went just fine.
It was really the card...
Regards!
On 12/28/05, Michael Kintzios [EMAIL PROTECTED] wrote:
-Original Message-
From: Cláudio Henrique [mailto:[EMAIL PROTECTED]
Sent: 28 December 2005 11:10
To:
2005/12/28, Marco Calviani [EMAIL PROTECTED]:
Hi list,
i would like to know if the x11-drm ebuild, as of now
(x11-drm-20051223), supports the r300 and r350 ATI video cards.
In particular what is the best open source configuration for such a
card and xorg (6.8.2)?
Best regards,
MC
As
On Wed, 28 Dec 2005 15:48:05 -0800, Grant wrote:
Hello, I'm trying to upgrade my server to the latest hardened-sources
kernel. I'm trying to mount my /dev/hda1 partition to /boot but I'm
getting the error:
mount: unknown filesystem type 'ext2'
It's true that I don't have ext2
Hi list,
maybe this question is a little bit related since it regards non
Gentoo-specific topics.
I would like to add a specific suffix to a list of files. For example
i have files of the type:
duck1.jpg
duck2.jpg
duck3.jpg
and i would like them to become:
donald_duck1.jpg
donald_duck2.jpg
fire-eyes wrote:
I drop[snip]
Okay this has been resolved. I have been using alsa kernel drivers, and
something along the way pulled in alsa-driver. Odd though, I can't
figure out what, equery d alsa-driver shows nothing..
Reinstalling the kernel did the trick.
Thanks for the reads and
On 14:24 Thu 29 Dec , Marco Calviani wrote:
i have files of the type:
duck1.jpg
duck2.jpg
duck3.jpg
and i would like them to become:
donald_duck1.jpg
donald_duck2.jpg
donald_duck3.jpg
for i in duck*.jpg ; do mv ${i} donald_${i} ; done
--
gentoo-user@gentoo.org mailing list
i have files of the type:
duck1.jpg
duck2.jpg
duck3.jpg
and i would like them to become:
donald_duck1.jpg
donald_duck2.jpg
donald_duck3.jpg
Does somebody knows a simple way to do this via shell?
for i in $(ls *.jpg); do mv $i donald_$i; done
Best regards
ce
--
On Thu, 29 Dec 2005 14:24:31 +0100 Marco Calviani
[EMAIL PROTECTED] wrote:
| duck1.jpg
| duck2.jpg
| duck3.jpg
|
| and i would like them to become:
|
| donald_duck1.jpg
| donald_duck2.jpg
| donald_duck3.jpg
|
| Does somebody knows a simple way to do this via shell?
rename '' 'donald_'
On Wed, Dec 28, 2005 at 09:22:58PM -0800, larry wrote
trying to emerge realplayer, received following error msg:
[...deletia...]
Unable to establish SSL connection.
Let me guess, you've emerged wget without ssl. wget is used by emerge
to get files. If the URL begins with https (note the
--
gentoo-user@gentoo.org mailing list
On Dec 29, 2005, at 9:14 AM, gentoo user mail list wrote:
okay... we're good, but we need a BIT more information than that. :)
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
Dear All,
I am a newbie here, and I wonder if I might ask you a few questions
about Gentoo. I've looked on the Gentoo website, but can't see answers
to all of these.
Basically, I've now used Mandrake/Mandriva for the last 4 years, and
become fairly proficient with it, but am considering that it
On Thu, 29 Dec 2005 23:14:41 +0800 gentoo user mail list
[EMAIL PROTECTED] wrote:
|
Cut the blue wire first, then the green wire within the next five
seconds. Whatever you do, don't touch the red wire!
--
Ciaran McCreesh : Gentoo Developer (King of all Londinium)
Mail: ciaranm at
On Thursday 29 December 2005 17:36, Ciaran McCreesh wrote:
On Thu, 29 Dec 2005 23:14:41 +0800 gentoo user mail list
[EMAIL PROTECTED] wrote:
Cut the blue wire first, then the green wire within the next five
seconds. Whatever you do, don't touch the red wire!
sometimes they fool with
On Thu, 29 Dec 2005 15:24:58 +
Richard Neill [EMAIL PROTECTED] wrote:
1)My main machine is a laptop, so it doesn't really have either the disk
space for sources or CPU power to compile everything
kernel,X,kde,openoffice ...). Is there a way to do a binary install that
will get me a fully
On Wed, 2005-12-28 at 21:22 -0800, larry wrote:
i tried using the suggested option:
`--no-check-certificate'
emerge didn't like it. anyone run into this?
thanks-
In /etc/make.conf
~line 187
look at FETCHCOMMAND, and RESUMECOMMAND. Uncomment them and add
--no-check-certificate in
On 29 December 2005 17:24, Richard Neill wrote:
1)My main machine is a laptop, so it doesn't really have either the disk
space for sources or CPU power to compile everything
kernel,X,kde,openoffice ...). Is there a way to do a binary install that
will get me a fully working system within a
On 29 December 2005 17:15, John Jolet wrote:
On Dec 29, 2005, at 9:14 AM, gentoo user mail list wrote:
okay... we're good, but we need a BIT more information than that. :)
Reminds me on something Matthias Ettrich once said when kwm was still KDE's
window manager: Alright, folks, next I will
You cannot really stay current on binaries but you can gradually
convert your
binary installation to a self-compiled one. You said above that
your *main*
machine was a laptop with insufficient harddisk space and CPU
power. That
implies you do have at least one other box. You could keep the
Thanks for the input. For reference if anyone stumbles across this
thread looking for the same information, I found the following
extremely helpful:
http://forums.gentoo.org/viewtopic.php?t=56633
Cheers,
--
Ant...
--
gentoo-user@gentoo.org mailing list
My personal account (michael) cannot offload pictures from my usb
digital camera - only root can do it. michael is in the usb group.
There used to be a file called /etc/security/console.perms which allowed
the michael user to offload pictures, but it's gone now. How can I make
it where I don't
Anthony Roy schrieb:
Hi all,
The short question (for those of you who can't be bothered to read the
detail!):
What is a good IMAP server to set up on Gentoo?
Any. I like dovecot. Easy to install and full of features.
How can I automatically move email from several pop servers into an
$(ls *.jpg)
ick!
(incidentally, http://www.ruhr.de/home/smallo/award.html#ls)
I forgot to clarify that the CPU of my notebook usually is bored and
waits until I move my mouse, so some ls processes can make it a bit
busy :) .
Best regards
ce
--
gentoo-user@gentoo.org mailing list
Hi Michael,
My personal account (michael) cannot offload pictures from my usb
digital camera - only root can do it. michael is in the usb group.
There used to be a file called /etc/security/console.perms which
allowed the michael user to offload pictures, but it's gone now. How
can I make
Hello, I'd like to ssh into my network over the internet. Do I need
to set up VPN for that? Can anyone point me in the right direction?
- Grant
no, you just type:
ssh my.network.com
Depending on your setup you will probably need to set your
firewall/router to forward port 22 to
Hello, I'm trying to upgrade my server to the latest hardened-sources
kernel. I'm trying to mount my /dev/hda1 partition to /boot but I'm
getting the error:
mount: unknown filesystem type 'ext2'
It's true that I don't have ext2 support compiled into my kernel, but
I never
2005/12/29, David Morgan [EMAIL PROTECTED]:
for i in duck*.jpg ; do mv ${i} donald_${i} ; done
Well! Thank you very much David. That solved my problem!
Best regards,
MC
--
gentoo-user@gentoo.org mailing list
On Thursday 29 December 2005 18:28, Christoph Eckert wrote:
Hi Michael,
My personal account (michael) cannot offload pictures from my usb
digital camera - only root can do it. michael is in the usb group.
There used to be a file called /etc/security/console.perms which
allowed the
It's been over an hour since I sent this in to the list and my log files
say that it was sent, but I haven't gotten it back from the list yet.
I'm sending it again...
Forwarded Message
From: Michael Sullivan [EMAIL PROTECTED]
To: gentoo-user gentoo-user@lists.gentoo.org
Subject:
On Thu, 2005-12-29 at 23:14 +0800, gentoo user mail list wrote:
I need somebody, HELP, not just anybody, Help.
When I was younger so much younger then today...
--
Lares Moreau [EMAIL PROTECTED] | LRU: 400755 http://counter.li.org
lares/irc.freenode.net |
Gentoo x86 Arch Tester
On Thu, 29 Dec 2005 09:37:49 -0800, Grant wrote:
# mount /dev/hda1 /boot
mount: unknown filesystem type 'ext2'
OK. I see now. By specifying the device and mount point, you bypass fstab.
Default will be what mount THINKS it is, which is like doing mount -t auto...
If you just did mount
Earlier today, I did an emerge --sync and proceeded to update world,
including portage (now 2.0.53). I have an amd64 system running mostly
stable, with a bunch of ~amd64 packages listed in my package.keywords
and a small portage tree overlay that is not of relevance here.
Now. For some reason,
On Thu, Dec 29, 2005 at 10:58:11AM -0700, Lares Moreau wrote:
On Thu, 2005-12-29 at 23:14 +0800, gentoo user mail list wrote:
I need somebody, HELP, not just anybody, Help.
When I was younger so much younger then today...
I never needed anybody's help in any way...
pgp1k89Olw7ex.pgp
somebody knows a program that let me see what others are doing on
their consoles?
i.e.: I'm root and with 'w' command i see that 'foo' user is running
'vi index.php' but i need to see what is he typing so i can have
control of what is he doing.
Thanks in advance,
Santiago del Castillo
--
I've only used xfce4 on my Gentoo system and I've decided to give kde
a try. I love the minimalist approach of xfce, but it would be nice
to have more features. We'll see.
I use -* in make.conf and I've carefully added only the local and
global flags I know I'll use for the packages about to be
I've only used xfce4 on my Gentoo system and I've decided to give kde
a try. I love the minimalist approach of xfce, but it would be nice
to have more features. We'll see.
I use -* in make.conf and I've carefully added only the local and
global flags I know I'll use for the packages about
My kmail is broken and remerging kdepim hasn't fixed it, so I figured that I
should rebuild arts kdelibs, kdeaddond and then kdepim. (I arrived at this from
reading messages while kdepim was running.) At this point, I'm stuck on
kdeaddons which fails with the message below. I've remerged acl and
# mount /dev/hda1 /boot
mount: unknown filesystem type 'ext2'
OK. I see now. By specifying the device and mount point, you bypass fstab.
Default will be what mount THINKS it is, which is like doing mount -t auto...
If you just did mount /boot it would be fine.
OK, so mount only refers
I've only used xfce4 on my Gentoo system and I've decided to give kde a
try. I love the minimalist approach of xfce, but it would be nice to
have more features. We'll see.
I use -* in make.conf and I've carefully added only the local and global
flags I know I'll use for the packages
On 12/28/05, Marco Calviani [EMAIL PROTECTED] wrote:
Hi list,
i would like to know if the x11-drm ebuild, as of now
(x11-drm-20051223), supports the r300 and r350 ATI video cards.
I tried to get the r300 driver working on my system a few weeks ago.
Unfortunately my PCIe Mobility X600 is
On 12/29/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
My kmail is broken and remerging kdepim hasn't fixed it, so I figured that I
should rebuild arts kdelibs, kdeaddond and then kdepim. (I arrived at this
from
reading messages while kdepim was running.) At this point, I'm stuck on
On Thu, 29 Dec 2005 11:19:26 -0800, Grant wrote:
Why not just run it from livecd? Save yourself the hassle. Why on earth
do you use -* in make.conf? for KEYWORDS? don;t do that!
Why not use -* for KEYWORDS? I always do a pretend emerge before a real
one and I research each new USE flag I
Michael Kjorling wrote:
Now. For some reason, even after updating everything else, emerge
-auDv world still wants to pull in sys-apps/busybox-1.00-r4. I have
had sys-apps/busybox in my package.mask file ever since it getting
pulled in as a dependency to something severely crippled my system,
On 12/29/05, Grant [EMAIL PROTECTED] wrote:
OK, so mount only refers to fstab for fs info if the device isn't
specified. What is the logic behind that? If that behavior was
recently implemented, it would explain why I'm only now getting the
error. I've always mounted as above.
From the
Hi Richard,
first of all for your reply.
1. Run lspci to identify the slot of your adapter:
03:00.0 VGA compatible controller: ATI Tech...
2. Run lspci -n -s slot to get the vendor and card ID:
carcharias rjf # lspci -n -s 03:00.0
03:00.0 0300: 1002:3150
From the above, the vendor
On Thu, 29 Dec 2005 11:05:00 -0800, Grant wrote:
# mount /dev/hda1 /boot
mount: unknown filesystem type 'ext2'
OK. I see now. By specifying the device and mount point, you bypass
fstab. Default will be what mount THINKS it is, which is like doing
mount -t auto...
If you just did
On 29 Dec 2005, at 17:28, Grant wrote:
... you just type:
ssh my.network.com
Depending on your setup you will probably need to set your
firewall/router to forward port 22 to the machine you want to log
into.
Also make sure your ssh server is set up securely.
I really don't have any idea
On 2005-12-29 21:05 +0200, [EMAIL PROTECTED] wrote:
$ grep busybox /usr/portage/profiles/default-linux/packages
*sys-apps/busybox
Since I don't need this (if my system breaks, I have several live-CDs
available that are much more likely to be bootable to begin with), and
had so much trouble with
Jeff schrieb:
app-text/poppler-0.4.3-r1 is already installed, so why would xpdf come
out to be a blocker as well as try to install 2 instances of itself,
emerge -C poppler xpdf ; emerge -vat poppler
Alexander Skwar
--
gentoo-user@gentoo.org mailing list
Ok...
emerge -uDNp world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[blocks B ] app-text/xpdf-3.01-r4 (is blocking
app-text/poppler-0.4.3-r1)
[ebuild N] x11-libs/motif-config-0.9
[ebuild N] x11-libs/openmotif-2.2.3-r8
[ebuild N
On Thursday 29 December 2005 19:39, Delca wrote:
somebody knows a program that let me see what others are doing on
their consoles?
i.e.: I'm root and with 'w' command i see that 'foo' user is running
'vi index.php' but i need to see what is he typing so i can have
control of what is he
Delca wrote:
somebody knows a program that let me see what others are doing on
their consoles?
i.e.: I'm root and with 'w' command i see that 'foo' user is running
'vi index.php' but i need to see what is he typing so i can have
control of what is he doing.
Thanks in advance,
Santiago del
one called poke and peekworks on all unixes i've found so
far. pretty inexpensive, but not free. peek allows you to watch,
and the poke part lets you take over. or you can use vnc with a
particular argument to share the :0 display.
On Dec 29, 2005, at 2:57 PM, Etaoin Shrdlu wrote:
If you are looking to reach your gentoo computer, consider sshd. You
can search the gentoo wiki for help docs for setup and usuage.
http://www.gentoo-wiki.com
On 12/29/05, Stroller [EMAIL PROTECTED] wrote:
On 29 Dec 2005, at 17:28, Grant wrote:
... you just type:
ssh my.network.com
On Thursday 29 December 2005 21:04, Jeff wrote:
Calculating world dependencies ...done!
[blocks B ] app-text/xpdf-3.01-r4 (is blocking
app-text/poppler-0.4.3-r1)
[ebuild N] app-text/xpdf-3.01-r3
app-text/poppler-0.4.3-r1 is already installed, so why would xpdf come
out to be a
Ran that yesterday and after some remerging and unmerging, got it to run
successfully. I was still having kmail problems, so I tried remerging kdepim.
It built without error. Still unable to send from kmail. (setup unchanged) I
did an # emerge -uDvt world, and emerge --depclean --pretend checked
I get the following error in my Xorg log when trying to start X. I
can't figure out what is happening.
Duplicate symbol __glXSingleTable in
/usr/X11R6/lib/modules/extensions/libglx.a:glxmodule.o
I've searched the internet for this problem, to no avail. I've
installed the ati-drivers, and I
I want to extract some video from a Shockwave Flash (.SWF) file a
little Googling reveals they're containers and that lots of other
content can be stored within them.
I see loads loads of demo or shareware decompilers for windows
which will allow the video c to be extracted from a
... you just type:
ssh my.network.com
Depending on your setup you will probably need to set your
firewall/router to forward port 22 to the machine you want to log
into.
Also make sure your ssh server is set up securely.
I really don't have any idea where to start here. Does
On 29 Dec 2005, at 22:30, Grant wrote:
How is your network connected to the internet?
http://www.google.com/search?ie=utf8oe=utf8q=port+forwarding
The first link looks fairly useful.
Stroller.
That helped a lot. I have a high-number port on the router forwarding
to one of my systems.
How is your network connected to the internet?
http://www.google.com/search?ie=utf8oe=utf8q=port+forwarding
The first link looks fairly useful.
Stroller.
That helped a lot. I have a high-number port on the router forwarding
to one of my systems. How can I access the
KISS - keep it short and simple.
Doesnt that also stand for keep it simple stupid!?
You can also use port knocking for additional security for SSH. I dont
know anything about VPN so I wont comment.
--
Ryan Viljoen Bsc(Eng) (Electrical)
When you say I wrote a program that crashed Windows,
How is your network connected to the internet?
http://www.google.com/search?ie=utf8oe=utf8q=port+forwarding
The first link looks fairly useful.
Stroller.
That helped a lot. I have a high-number port on the router forwarding
to one of my systems. How can I access the
On Friday 30 December 2005 00:14, Stroller wrote:
I want to extract some video from a Shockwave Flash (.SWF) file a
little Googling reveals they're containers and that lots of other
content can be stored within them.
I see loads loads of demo or shareware decompilers for windows
which
I have a AMD Athlon 2800+ processor running on a Asus A7N8X Deluxe
motherboard. This motherboard uses the Nvidia NForce2 chipset. It has
both an Nvidia and a 3Com 100 mbps network adapter integrated.
Initially I used the Nvidia network adapter but noticed a lot of Rx
errors. The errors and
You can get a hostname which will resolve to your dynamic IP at
http://dyndns.com - there are some free utilities which you can run
to do the updating.
There is also no-ip.com both no-ip and dyndns update clients are in
the portage tree so now worries there. Sorry for the repetitive mail.
--
On Thu, Dec 29, 2005 at 03:20:48PM -0600, John Jolet wrote:
one called poke and peekworks on all unixes I've found so
far. pretty inexpensive, but not free. peek allows you to watch,
and the poke part lets you take over. or you can use vnc with a
particular argument to share the
Worked as planned guys. Thanks much.
How I did it:
# emerge -C poppler xpdf ; emerge -vat poppler
Then, add app-text/xpdf to /etc/portage/package.keywords
Thanks much.
:-)
Daniel Heemann wrote:
On Thursday 29 December 2005 21:04, Jeff wrote:
Calculating world dependencies ...done!
On Friday 30 December 2005 06:43, Gerhard Hoogterp wrote:
I had something alike and found that the hotplug script was looking
for /var/run/console/console.lock to see who owned the console (and to use
this info to chown the usbfile)
You can easily check if you have the same problem:
--- larry [EMAIL PROTECTED] wrote:
trying to emerge realplayer, received following
error msg:
emerge (1 of 1)
media-video/realplayer-10.0.6 to /
Downloading
https://helixcommunity.org/download.php/1589/RealPlayer-10.0.6.776-20050915.i586.rpm
--21:17:33--
On 29 Dec 2005, at 23:18, Grant wrote:
Also, what should I do about securing ssh? I'm using a high port
number. Is there other special configuration I should be using? I'm
using the standard sshd_config except for the high port number
specification.
Using a high port number isn't terribly
Hi,
Most of your questions have been answered by more knowledgeable people
on the list than I. However, I do I one comment:
Richard Neill wrote:
4)Does anyone know of a good resource for ex-mandriva users?
I can't say enough good things about Gentoo documentation:
I am trying out programmable completion following the tab completion
TIP at gentoo-wiki:
http://gentoo-wiki.com/TIP_TAB-completion
Things mostly work as expected.
I also turned on programmable completion for bash using
shopt -s progcomp
My question: how does the tab completion determine
Anyone here an ndiswrapper expert? I would most welcome some setup help...
I'm working with a COMPAQ R3320US which sports an internal wifi setup using
the broadcom BCM4306 chipset. Installing the ndiswrapper and the correct
windows drivers, the setup process seems to go without a hitch.
Here I go again. This never got to the list, which I assume is
because it had an attachment. So, this time it doesn't, I've inlined
the xorg log.
I get the following error in my Xorg log when trying to start X. I
can't figure out what is happening.
Duplicate symbol __glXSingleTable in
On Thursday 29 December 2005 08:24, Marco Calviani wrote:
Hi list,
maybe this question is a little bit related since it regards non
Gentoo-specific topics.
I would like to add a specific suffix to a list of files. For example
i have files of the type:
duck1.jpg
duck2.jpg
duck3.jpg
On Thu, 2005-12-29 at 11:53 -0600, Michael Sullivan wrote:
It's been over an hour since I sent this in to the list and my log files
say that it was sent, but I haven't gotten it back from the list yet.
I'm sending it again...
Forwarded Message
From: Michael Sullivan [EMAIL
On Wednesday 28 December 2005 09:22 pm, larry wrote:
trying to emerge realplayer, received following error msg:
emerge (1 of 1) media-video/realplayer-10.0.6 to /
Downloading
https://helixcommunity.org/download.php/1589/RealPlayer-10.0.6.776-20050915
.i586.rpm --21:17:33--
On Friday 30 December 2005 06:43, Gerhard Hoogterp wrote:
Interesting I can get it to work the first time it is connected. But after
disconnetcting or turning off the camera (a Kodak cx7330) it doesnt work
anymore. Neither as root or as user.
It looks liek every time I reconnect a usb device
Such a question shows the power of bash programming.
Method1 :
ls -1 *.jpg | while read file; do mv $file \
donald_$file; done
Method2 :
ls -1 *.jpg | awk '{ print mv $1 donald_$1; } | \
/bin/bash
Method3 :
find -name *.jpg -exec mv {} donald_{} ';'
On Fri, 30 Dec 2005 11:57 am, Jerry
On Friday 30 December 2005 16:09, Glenn Enright wrote:
On Friday 30 December 2005 06:43, Gerhard Hoogterp wrote:
Interesting I can get it to work the first time it is connected. But after
disconnetcting or turning off the camera (a Kodak cx7330) it doesnt work
anymore. Neither as root or as
I ran emerge sync earlier this evening and I got the following at the end of
the output:
Performing Global Updates: /usr/portage/profiles/updates/4Q-2005
(Could take a couple of minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db
-* are masked for all archs. This is experimental beyond ~*. Furthermore,
you should at least specify your particular arch, like x86, amd64, ppc.
Many applications don't even use a -* arch so you will be missing a whole
bunch of stuff.
A better way to handle this is to use the
On Friday 30 December 2005 14:27, Robert Persson wrote:
I ran emerge sync earlier this evening and I got the following at the end
of the output:
Performing Global Updates: /usr/portage/profiles/updates/4Q-2005
(Could take a couple of minutes if you have a lot of binary packages.)
.='update
On Friday 30 December 2005 01:47, Trenton Adams wrote:
Here I go again. This never got to the list, which I assume is
because it had an attachment. So, this time it doesn't, I've inlined
the xorg log.
It did, but gmail has the nasty habit to hide your posts AFAIK...
(II) LoadModule:
On December 29, 2005 10:31 pm Jason Stubbs was like:
One of your /etc/portage/package.* files contains an invalid atom. By the
look of the traceback, you have a line with just a * perhaps?
Jason Stubbs
That was it! Thanks!
I had a line reading * media-video/mpeg4ip in
89 matches
Mail list logo
