Hi again
Sometimes sending message to list puts brainwork and luck to the new level.
problem was in /etc/fonts/ From some time there should be conf file named
local.conf and my mistake was to left old fonts.conf there.
thanx to e17 (just emerged), console and opera combination that allowed me
Le 06 août à 07:30:12 Jean Magnan de Bornier [EMAIL PROTECTED] écrit
notamment:
| Le 06 août à 02:59:19 Bob Sanders [EMAIL PROTECTED] écrit notamment:
|
| | Have you added your username to /etc/group, disk?
| yes, without any change!
|
Well I found what was missing:
Looking at the two
Hi
has anyone managed to play the go-open movies
(http://www.go-opensource.org/) with sound?
I can't seem to get sound on them. what USE flag do I have to enable?
these are the use flags I'm using now:
[ebuild R ] media-video/mplayer-1.0_pre6-r4 -3dfx -3dnow -3dnowext
+X +aalib +alsa
Hi
I'm looking for an non-php alternative to irm (http://irm.sf.net). it is
a very nice application to manage hardware/software/etc.. but I just
don't like php, and I don't want to install it on my production server.
thanx
--
Haim
signature.asc
Description: This is a digitally signed message
I'm trying to emerge pciutils normally, and it's downloaded, checked,
and unpacked all of the sources correctly, but it hangs up on Updating
pci.ids. Any ideas why/if it will fix itself/how to fix it?-- Jesse (JB) Hannah
On Saturday 06 August 2005 09.03, Haim Ashkenazi wrote:
Hi
has anyone managed to play the go-open movies
(http://www.go-opensource.org/) with sound?
Try starting mplayer from a console and see what output you get when it loads
the movie. That should give you a hint. Look for this:
Clip
Jesse Hannah [EMAIL PROTECTED] writes:
I'm trying to emerge pciutils normally, and it's downloaded, checked, and
unpacked all of the
sources correctly, but it hangs up on Updating pci.ids. Any ideas why/if it
will fix itself/how
to fix it?
Essentially, Updating pci.ids is doing a `wget'
On Sat, 2005-08-06 at 11:12 +0300, Haim Ashkenazi wrote:
On Sat, 2005-08-06 at 09:44 +0200, Andreas Karlsson wrote:
On Saturday 06 August 2005 09.03, Haim Ashkenazi wrote:
Hi
has anyone managed to play the go-open movies
(http://www.go-opensource.org/) with sound?
Try starting
Ah, that makes sense. I've been working on a stage 1 install, and my
internet connection's been kinda shaky on my all evening. wgets
haven't been working for me very well, so I guess I could try getting
the package from elsewhere (the packages CD, maybe).
Thank you very much :)
--
Jesse (JB)
On Friday 05 August 2005 14.37, Holly Bostick wrote:
Dan Johansson schreef:
Not without knowing at what point the boot fails.
What is the error you're getting, and at what point after selecting the
Gentoo entry?
root (hd1,2)
Filesystem type is ext2fs partition type 0x83
kernel
Hi!
Whenever someone has Grub problems it'd be a good idea to not only post
grub.conf but more importantly infos about the disk layouts (and fstab
to round it up).
In your case there seems to be a couple of things to verify.
I assume that Grub didn't come up with its initial dialog? That
Don't work doom3 nor ut2004 due to errors of loading OpenGL library.
* media-video/nvidia-kernel
Latest version available: 1.0.7667
Latest version installed: 1.0.7667
* media-video/nvidia-glx
Latest version available: 1.0.7667
Latest version installed: 1.0.7667
$
On Saturday 06 August 2005 11.10, Ryan Viljoen wrote:
You are all going to hate me for this but I had no luck in Linux, you
need to get the AAC codec working which I wasnt successfull at doing.
If you have access to a windows machine than download VLC media
player, its the only player that I
On Saturday 06 August 2005 12.12, Andreas Karlsson wrote:
Well, I´m recompiling xine-lib now with acc support to see if that helps,
as I go curious about the movies and downloaded them :)
Okay, the recompile is done. Now Xine doesn´t complain about not being able to
decode the audio stream,
I have just installed the cisco vpn client and cant figure how it
accesses the .pcf configs under gentoo. Can someone in the know tell me
how to specify a .pcf when issuing a /etc/init.d/vpnclient start ?
Where I work has given me a couple of different configs depending where
I access from, but
I was chatting to a friend on IRC and he got them to play in mplayer
by editing the mplayer ebuild:
[12:58] afv-13 [ebuild R ] media-video/mplayer-1.0_pre7 -3dfx
-3dnow -3dnowext +X +aac -aalib +alsa (-altivec) -arts -bidi -bl
-cdparanoia -cpudetection -custom-cflags -debug -dga -directfb
[EMAIL PROTECTED] wrote:
Don't work doom3 nor ut2004 due to errors of loading OpenGL library.
* media-video/nvidia-kernel
Latest version available: 1.0.7667
Latest version installed: 1.0.7667
* media-video/nvidia-glx
Latest version available: 1.0.7667
Latest version
Hi,
On Sat, 06 Aug 2005 18:26:57 +0800
W.Kenworthy [EMAIL PROTECTED] wrote:
I have just installed the cisco vpn client and cant figure how it
accesses the .pcf configs under gentoo. Can someone in the know tell me
how to specify a .pcf when issuing a /etc/init.d/vpnclient start ?
There
Thanks, this is info I have not been able to find elsewhere. I will
look at vpnc.
The configs are supplied by work, but being a weekend, its hard to ask
for directions.
BillK
On Sat, 2005-08-06 at 14:15 +0200, Hans-Werner Hilse wrote:
Hi,
On Sat, 06 Aug 2005 18:26:57 +0800
W.Kenworthy
On Sat, 2005-08-06 at 13:03 +0200, Ryan Viljoen wrote:
I was chatting to a friend on IRC and he got them to play in mplayer
by editing the mplayer ebuild:
[12:58] afv-13 [ebuild R ] media-video/mplayer-1.0_pre7 -3dfx
-3dnow -3dnowext +X +aac -aalib +alsa (-altivec) -arts -bidi -bl
On Sat, 6 Aug 2005 01:32:38 -0400 (EDT), Ian K wrote:
I am getting an Error 15
when grub loads. I booted in with a Gentoo Live CD
and got the file, and am including it. I think the
error 15 code is a syntax error, right? Here is
the file. Let me know if you see a problem.
Error 15 is file
On Fri, 5 Aug 2005 20:29:43 +1000, Robert S wrote:
Is this file automatically created or is it user-defined? I don't
remember ever creating it or editing it. Should I put my own
environment variables in here or should I use /etc/profile?
Put them in here, then env-update will add them to
On Thu, 4 Aug 2005 14:14:47 -0400, Sean Higgins wrote:
dd would be a good choice if the partitions are the same size. I do
not think it works as well of you are changing the sizes of the
partitions.
dd is fine, if very slow, when the target partition is larger than the
source. You will need
I started emerge -Nave yesterday, but used the so I could close out
my ssh session w/o interrupting the program. It's still compiling (of
course), but I want to be able to see the output (I know it's still
running from gnome-system-monitor, pktstat). Is there any way to
recapture the output to
err, it wasn't emerge -Nave, it was emerge -ve world.
On 8/6/05, Mark Shields [EMAIL PROTECTED] wrote:
I started emerge -Nave yesterday, but used the so I could close out
my ssh session w/o interrupting the program. It's still compiling (of
course), but I want to be able to see the output (I
On 8/5/05, Andreas Fredriksson [EMAIL PROTECTED] wrote:
A better option is to use . (dot) a the directory. Also adding -p topreserve permissions is essential when backing up a whole system:tar cfp - . | (cd /target/path tar xvfp -)
try to use find to get all files?
-- riverfor's
Note that there's a more elegant solution with vpnc (also in
portage), if it fits for you (still hasn't some functions of Cisco's
client, but it's free and you don't have to use a binary proprietary
kernel module).
I agree, vpnc is the way to go. Free, and more control
On a
Perhaps I wasn't clear enough (I apologize, I was only waking up
then). I changed my make.conf file yesterday and starting recompiling
my entire system with emerge -ve world . I used the because I was
at work and didn't want the recompile process stopping if my ssh
session was terminated
On Fri, 05 Aug 2005 21:41:15 -0400
C.Beamer [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Now for the question. I need confirmation of my understanding. In
the make.conf file when setting up the USE flags, I include anything
that I want to have compiled into the
Hi all,
I have an customer that has a website hosted in a chrooted environment
and want a stats page (hits, origin, etc...) I have access to the apache
logs but I don't have a shell access, so I was thinking if there is any
php script that reads the log file and plots a nice web page with those
On Sat, 06 Aug 2005 08:57:41 +0200
Jean Magnan de Bornier [EMAIL PROTECTED] wrote:
Le 06 août à 07:30:12 Jean Magnan de Bornier [EMAIL PROTECTED] écrit
notamment:
Looking at the two necessary modules for kino:
/dev/raw/raw1394 is in group disk, while /dev/dv1394-0 is in group root;
(is
Hi
Could anyone tell me how I go about setting the default MTU of my
pppoe connection. I am using rp-pppoe to bring it up. It currently
sets it to 1432 and I need it to be 1352.
Thanks
Rav
--
When you play a Microsoft CD backwards you can hear demonic Voices...
that's nothing - when you play
Haim Ashkenazi wrote:
On Sat, 2005-08-06 at 15:37 +0300, Haim Ashkenazi wrote:
On Sat, 2005-08-06 at 13:03 +0200, Ryan Viljoen wrote:
I was chatting to a friend on IRC and he got them to play in mplayer
by editing the mplayer ebuild:
[12:58] afv-13 [ebuild R ]
Tried that it doesnt work I am afraid.
As you can see no change in the mtu...
ppp0 Link encap:Point-to-Point Protocol
inet addr:196.2.100.119 P-t-P:196.30.31.100 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1432 Metric:1
RX packets:316
Hi listers.
I'm in the process of installing gentoo for the first time and am now in
the process of going from stage 2 to stage 3. I am trying to do
emerge --emptytree system
It seems to be fine until it gets to installing openssl (14 of 186 apps
to be installed). The process stops and says
Dan Johansson wrote:
On Friday 05 August 2005 14.37, Holly Bostick wrote:
Dan Johansson schreef:
Not without knowing at what point the boot fails.
What is the error you're getting, and at what point after selecting the
Gentoo entry?
root (hd1,2)
Filesystem type is ext2fs
Jason Castonguay wrote:
Hi listers.
I'm in the process of installing gentoo for the first time and am now in
the process of going from stage 2 to stage 3. I am trying to do
emerge --emptytree system
It seems to be fine until it gets to installing openssl (14 of 186 apps
to be installed).
Mark Shields wrote:
Perhaps I wasn't clear enough (I apologize, I was only waking up
then). I changed my make.conf file yesterday and starting recompiling
my entire system with emerge -ve world . I used the because I was
at work and didn't want the recompile process stopping if my ssh
session
ok, so then try this
nano /etc/conf.d/local.start
and add
ifconfig ppp0 mtu 1352
on a new line
On 8/6/05, Ryan Viljoen [EMAIL PROTECTED] wrote:
Tried that it doesnt work I am afraid.
As you can see no change in the mtu...
ppp0 Link encap:Point-to-Point Protocol
inet
Could anyone tell me how I go about setting the default MTU of my
pppoe connection. I am using rp-pppoe to bring it up. It currently
sets it to 1432 and I need it to be 1352.
It's buried in the rp-pppoe config file (can't remember what the name
of the option is, but if you look for 1432, that
Heinz Sporn wrote:
Hi!
Whenever someone has Grub problems it'd be a good idea to not only post
grub.conf but more importantly infos about the disk layouts (and fstab
to round it up).
OK, well I have a dual boot with Windows happening here as you
probably can tell. Its all on the one hard
Raymond Lillard wrote:
Mark Shields wrote:
Perhaps I wasn't clear enough (I apologize, I was only waking up
then). I changed my make.conf file yesterday and starting recompiling
my entire system with emerge -ve world . I used the because I was
at work and didn't want the recompile process
Hey guys,
I was poking around, and saw that my boot simlink was wiped.
I thought that was the answer. But I now boot and get an
error 16. g.
Ian
Ian K wrote:
Heinz Sporn wrote:
Hi!
Whenever someone has Grub problems it'd be a good idea to not only post
grub.conf but more
Yeah I was hoping it wouldnt come to adding it in there paul. Looks
like I am going to.
James I grep'd all the files in /etc/ppp/ for 1432 with out any success.
On 8/6/05, James Hiscock [EMAIL PROTECTED] wrote:
Could anyone tell me how I go about setting the default MTU of my
pppoe
Yeah I was hoping it wouldnt come to adding it in there paul. Looks
like I am going to.
The only problem with this is that if the connection drops than the
MTU will return to 1432.
--
When you play a Microsoft CD backwards you can hear demonic Voices...
that's nothing - when you play it
Le 06 août à 17:39:16 Bob Sanders [EMAIL PROTECTED] écrit notamment:
| I put /dev/dv1394-0 in the disk group as well and now everything seems to
| be ok, unless there might be some side effect(s)?
|
|
| It should be no problem. Technically, it would go into group - video.
|
| There is an
James I grep'd all the files in /etc/ppp/ for 1432 with out any success.
Sorry -- it's been a long time since I've fiddled with rp-pppoe. The
setting's actually buried and hard-coded in /usr/sbin/adsl-connect...
around line 223 (PPP_STD_OPTIONS)...
--
gentoo-user@gentoo.org mailing list
I just emerged a bunch of packed to bring my system up to date, one of the
updates was mozilla. After this, Galeon no longer knows how to deal with
flash. It acts like the flash plug-in is not installed.
I've re-emerged galeon and netscape-flash, but it didn't help.
Anyone know how to fix flash in
Hi all,
Ive got a font problem, apps like abiword gimp that use GTK fonts (I
think :-) ) have very small jaggerdy witting for their menus in KDE
fluxbox.
If I gnome-control-center select anti-aliasing the menus look
wonderful, smoother than my kde3.4 menus !
This is great until I log
whenever I send an email with mutt to a mailing list, (like I am now),
and I receive a copy of my own post, mutt displays the From: information
different for my emails
example:
421 F Aug06 To [EMAIL PROTECTED] test
I have set realname=myrealname set in my .muttrc
is this a feature ?
El Sáb 06 Ago 2005 22:40, Dave S escribió:
Hi all,
Ive got a font problem, apps like abiword gimp that use GTK fonts (I
think :-) ) have very small jaggerdy witting for their menus in KDE
fluxbox.
If I gnome-control-center select anti-aliasing the menus look
wonderful, smoother than my
Richard Fish wrote:
emerge --emptytree system
It seems to be fine until it gets to installing openssl (14 of 186 apps
to be installed). The process stops and says that perl 5 is required.
There is probably a circular dependancy here caused by USE flags.
You can try:
USE=minimal -*
Never mind I just updated /etc/conf.d/alsasound and noted it's new
setting:
# ENABLE_OSS_EMUL:
# Do you want to enable in-kernel oss emulation?
# no - Do not load oss emul drivers
# yes - Load oss emul drivers if they're found
ENABLE_OSS_EMUL=yes
On Sun, 2005-08-07 at 11:40 +1200, Nick Rout
050806 David H. Askew wrote:
whenever I send an email with mutt to a mailing list like I am now,
and I receive a copy of my own post,
Mutt displays the From: information different for my emails : eg
421 F Aug06 To [EMAIL PROTECTED] test
I have set realname=myrealname set in my .muttrc
alsaconf from alsa-utils-1.09a is setting up the
barest /etc/modules.d/alsa file:
[EMAIL PROTECTED] /etc/modules.d $ cat alsa
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
options snd device_mode=0666
alias snd-card-0 snd-via82xx
alias
i'm actually using nbsmtp, but I don't think its actually a header
problem, but rather a mutt display problem
... thanks for the suggestion anyway
--
gentoo-user@gentoo.org mailing list
Thanks, I will look at this get back to it this avo.
BillK
On Sat, 2005-08-06 at 10:22 -0400, David H. Askew wrote:
Note that there's a more elegant solution with vpnc (also in
portage), if it fits for you (still hasn't some functions of Cisco's
client, but it's free and you don't have
Ok strange one here , I got home tonight and somehow my ferrets got up on the
computer key board got logged in as su and managed to get into my runlevel
files and delete them. Not all but a good amount . Also in the process corrupt
my modules file as well . Got those back and can reload them
Yes... run /usr/libexec/gnome-settings-daemon as part of your KDE
startup (put a starter to it in your ~/.kde/Autostart folder).
-Original Message-
From: Dave S [mailto:[EMAIL PROTECTED]
Sent: Saturday, August 06, 2005 3:41 PM
To: Gentoo
Subject: [gentoo-user] GTK fonts
Hi all,
http://www.barnesbullets.com/faq_vlc_varminator.php
Heath E Miller wrote:
Ok strange one here , I got home tonight and somehow my ferrets got up on the computer key board got logged in as su and managed to get into my runlevel files and delete them. Not all but a good amount . Also in the
Does anyone on this list know of a good sw to transfer a dvd movie to a
cdrom? That is a tool that will compress a dvd down to about 700mb in
mpeg foramt.
TIA,
--
Qv6
--
gentoo-user@gentoo.org mailing list
ffmpeg, transcode or mencoder - these have plenty of options
a lot of GUIs are vailable on top of these too
At 06:54 2005.08.07., you wrote:
Does anyone on this list know of a good sw to transfer a dvd movie to a
cdrom? That is a tool that will compress a dvd down to about 700mb in
mpeg
On Sat, 6 Aug 2005 22:54:17 -0500
Qv6 [EMAIL PROTECTED] wrote:
Does anyone on this list know of a good sw to transfer a dvd movie to a
cdrom? That is a tool that will compress a dvd down to about 700mb in
mpeg foramt.
TIA,
--
Qv6
--
gentoo-user@gentoo.org mailing list
HA HA
On Sat, Aug 06, 2005 at 10:27:15PM -0400, Heath E Miller wrote:
Ok strange one here , I got home tonight and somehow my ferrets got up
on the computer key board got logged in as su and managed to get into my
runlevel files and delete them. Not all but a good amount . Also in the
process
050807 Moshe Kaminsky wrote:
This is controlled by the 'index_format' option.
You probably have an %F there.
You can change to %f or %n if you don't like it.
Yes, apparently I made 2 changes to the default. I have :
# set index_format=%4C %Z %{%b %d} %-15.15L (%4l) %s
set
... yep, you were right .. thanks
before
---
set index_format=%4C %Z %[%b%d] %-15.15F %s
after
---
set index_format=%4C %Z %[%b%d] %-15.15n %s
... i forgot how unbelievably flexible and customizable mutt was ... and
that behavior was bothering me ...
--
Subj.
scons: ***
[/var/tmp/portage/blender-2.37a/work/build/linux2/source/blender/readblenfile/intern/BLO_readblenfile.o]
Error 1
In file included from /usr/include/python2.3/Python.h:8,
from source/gameengine/Expressions/KX_Python.h:36,
from
On Sunday 07 August 2005 06:54, Qv6 wrote:
Does anyone on this list know of a good sw to transfer a dvd movie to a
cdrom? That is a tool that will compress a dvd down to about 700mb in
mpeg foramt.
TIA,
--
Qv6
mencoder
--
gentoo-user@gentoo.org mailing list
Hey all, I know somebody here has got to have info that may be of help.
If I'm totally missing something obvious here feel free to beat me to a
pulp - but anything is better than silence :) Since I didn't get any
responses last time I'll try one more time.
Original message:
Hello Everyone,
I
Heath E Miller wrote:
Ok strange one here , I got home tonight and somehow my ferrets got up on the computer key board got logged in as su and managed to get into my runlevel files and delete them. Not all but a good amount . Also in the process corrupt my modules file as well . Got those back
Ian K wrote:
Hey guys,
I was poking around, and saw that my boot simlink was wiped.
I thought that was the answer. But I now boot and get an
error 16. g.
Ian
Well, it turns out that when I replaced the symlink with a new one,
I replaced it wrong. It pointed to the wrong place.
Hey all,
Well, I went out and got a nice Logitech media keyboard, with some special
buttons on the top and all. Its a plain Logitech Multimedia Keyboard.
What Im wondering about is the back and forward buttons. These are
recognized, as with all but 2 of the buttons. What I am wondering is how I
Hi guys,
[disclaimer] I have a question, that could _potentially_ start a minor
flame war. [/disclaimer]
I personally, really like how Windows Media Player works. It is bloated,
yes, but I like how it
can play so much. It has radio, nice visuals, dvd, etc support. Much
like Xine. Im just
73 matches
Mail list logo
