Re: DFDSS QUESTION - SYNTAX ERROR

Try swapping the OPT(4) positions with the OUTDD statement and and add one more ) after your **. Should be 'DUMP DATASET(INCLUDE(**)) -' -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of esmie moo Sent: Tuesday, September 27, 2011 1:50

Re: IBM JES2 Manual

Here are some commands that I will use to offload the entire spool. You may want to look at the IBM JES2 manual listed here for more information: http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/HAS2A2A0/CCONTENTS?SHELF=has2bka0DN=SA22-7526-11DT=20100628130528 Sorry for the long lines

Re: Question about wiping a DS8100

I believe New Era has a product that you may use, lease for not too much money that will do the trick. We did three writes across everything with different patterns when we collapsed one a couple of years ago, old DOD standards. That is the basic deed, three write patterns to erase, cover the old

Re: Duplicate Volser

Check your IODF definition and see if the volumes are defined as 'Shared' and set to come online at IPL time. If so, when you vary them offline before an IPL, they will come online at IPL time. You may need to search for DASD volumes that are only accessible from the LPAR you wish them to be on.

Question on 'Welcome to IBM Service Request'

Did any of you get an email from a donotreply address at IBM for this new service? Just curious if it was legit. Regards, Claude -- For IBM-MAIN subscribe / signoff / archive access instructions, send

OT: Found an old IBM Year 2000 manual.

I was cleaning out my office today and found an old IBM manual from February 1998: The Year 2000 and 2-Digit Dates: A Guide for Planning and Implementation GC28-1251-08 What a nice trip down memory lane. BTW, anyone else out there have this manual with the cool picture on the front?

Make DASD index larger.

All, What is the best way to enlarge a DASD - INDEX on a volume? I have a 3390-9 volume with a 900 track VTOC and a 30 track index. The VTOC is okay, but the index is full, getting full. If I extend the VTOC and rebuild the index, that does not gain any index space, just re-orgs it

Re: Make DASD index larger.

and is in the location desired. Alan -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Richbourg, Claude Sent: Wednesday, May 19, 2010 09:30 To: IBM-MAIN@bama.ua.edu Subject: Make DASD index larger. All, What is the best way to enlarge a DASD - INDEX

Re: ZFS

Those are the reasons we have stayed with the HFS file type until we are forced to move to the zFS file structure. VSAM... Regards, Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Bruce Burgdoff Sent: Tuesday, April 27, 2010

Re: DSNDIST 91% CPU

Check to see if you have a Workload Manager Service Class definition for the DDF work,(distributed). You may want to throttle that back some. Hope that helps, Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Jorge Arueira Campos

Old assembler modules.

I was looking around and found an old library that contained these modules; IEV00 IEV10 IEV20 IEV50 IEV60 IEV80 IEV90 Was there ever an IEV30, IEV40 or IEV70? Just curious and wondered if someone made multiple copies... Regards, Claude

Re: Old assembler modules.

@bama.ua.edu Subject: Re: Old assembler modules. On Thu, 2010-02-11 at 14:46 -0500, Richbourg, Claude wrote: I was looking around and found an old library that contained these modules; Those were all associated with Assembler H; perhaps that is an old library with the SLAC mods applied? I'd lose 'em

SMP/E holddata via FTP.

All, Has the website/process changed to get enhanced SMP/E holddata via FTP? I have been trying to get this for the last couple of days and the job just hangs. This is the last message I get and I can also ping the site from the FTP system either by DNS or IP; Connecting to:

Re: SMP/E holddata via FTP.

run every day and I am NOT having any problems. The job runs at 3am and the FTP portion takes less than 10 seconds. Bob -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Richbourg, Claude Sent: Tuesday, January 12, 2010 1:35 PM To: IBM-MAIN

Re: TSSO and z/OS 1.11.

Hello Brian, Many thanks on the fix. This worked great and now we are in business with 1.11. Regards, Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Brian Westerman Sent: Tuesday, January 05, 2010 2:11 AM To: IBM-MAIN@bama.ua.edu

Re: TSSO and z/OS 1.11.

Hello Brian, I downloaded TSSO from the UPDATES section and it assembled fine. When TSSO traps a message on the syslog and fires off a command, I now get this from TSSO: TSSA305E TSSO COMMANDS MAY NOT BE ISSUED FROM THIS ENVIRONMENT Any ideas on what I may have missed or need to do? I do not

TSSO and z/OS 1.11.

Good morning all, I am uploading the 'new' TSSO that I pulled down from the CBT updates page. Does anyone know if it Is ready to go for z/OS 1.11? Thanks up front . Regards, Claude -- For IBM-MAIN

Re: Jes2 Converter abend d37

Put these in your TSO logon proc and you will be okay. //ISPCTL0 DD DISP=NEW,UNIT=VIO,SPACE=(CYL,(50,5)), //DCB=(LRECL=80,BLKSIZE=800,RECFM=FB) //ISPCTL1 DD DISP=NEW,UNIT=VIO,SPACE=(CYL,(50,5)), //DCB=(LRECL=80,BLKSIZE=800,RECFM=FB) //ISPCTL2 DD

Job opening in Sunny North Florida.

Just to let anyone know about this that may be interested. Position is in Tallahassee, Florida and it is a state job. Watch the wrap; https://jobs.myflorida.com/joblist.html?dispmode=27.-5ERFormID=newjobli stERFormCode=3.502021613167675 Click on 'Computer and Electronics', then look

Re: Secret Service plans IT reboot

It does not happen too much anymore on the mainframe, at least not too noticeable. But we always called it 'Storage Creep'. It just keeps on creeping up until IPL time, if you didn't catch it in time... - Original Message- From: IBM Mainframe Discussion List

Re: SYS1.VTAMLST Full - Production

Just run an IEBCOPY job to compress the PDS dataset. This will usually get you back a lot of space since this file is updated a lot. This is very easy to do with no issues that result from it. Let us know how it goes. Regards, Claude -Original Message- From: IBM Mainframe Discussion

Re: Enterprise COBOL for z/OS V4

I know, for us at a 125 MSU shop it is 381 dollars more per month. We checked with our IBM rep for the exact amount when we order 1.11 later this year. Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of McKown, John Sent: Friday,

Re: IBMLINK -- AGAIN?

Works for me just fine. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Jim Chappell Sent: Tuesday, May 19, 2009 9:43 AM To: IBM-MAIN@bama.ua.edu Subject: IBMLINK -- AGAIN? Anybody else? . 504 Gateway Time-out James (Jim) Chappell

FW: AST notification for OA26789 - CL

Looks like the HIPERDISPATCH fix is now available for those who want it. Claude Richbourg Florida Department of Corrections z Systems Programmer Office (850) 921-1383 APAR/PTF Reason -- OA26789 CL To view this document, please go to:

Re: AST notification for OA26789 - CL

Oops, I missed the part about it being ready around 4-24. My bad -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Richbourg, Claude Sent: Wednesday, April 08, 2009 10:03 AM To: IBM-MAIN@bama.ua.edu Subject: FW: AST notification

DFHSM hang condition on z/OS 1.9.

Has anyone noticed an occasional 'hung condition' on DFHSM lately? Where the task is just stuck and doing nothing? This has happened about 2-3 times over the past few months and at different times/conditions. I am going to prowl IBMLINK, but wanted to ask here as well. I may open an ETR later

Re: DFHSM hang condition on z/OS 1.9.

Thanks for the reply Allan, At the time(s) it seemed that DFHSM was finishing recycle processing and would not respond to commands or not come down with a purge command. There was no CDS backup running at the time(s). But next time it happens, I'll issue the below commands and look at the

Re: Is it me, or is IBMLINK having problems?

No trouble for me and snappy response for a change. Claude snip I keep getting errors trying to access IBMLINK. So I do not think it is you - it is THEM. Lizette snip Title says it all. Message I'm getting (this is after I had been logged in for a while): - Error

DFHSM primary volumes.

There are primary volume(s) I would like to remove from DFHSM as they are small volumes. We are at z/Os 1.9. I have nine volumes defined in the ADDVOL section as primary volumes. I would like to 'phase out' three of them. Without losing and data, what is the best method to get DFHSM to move

Re: when Alias was Created

Never delete, just rename In case you really do need it. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Arturo Sent: Wednesday, February 18, 2009 2:12 PM To: IBM-MAIN@bama.ua.edu Subject: Re: when Alias was Created The only

Re: Couple DS

For starters: D XCF,COUPLE Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Mark Steely Sent: Friday, February 13, 2009 10:26 AM To: IBM-MAIN@bama.ua.edu Subject: Couple DS We are z/OS V1R9. How can I displayed the SYSPLEX (XCF)

Re: z890 and Projectcpu

We did this with our old z/890 before the z/10 and it picked up the work that would go to a ZIIP or ZAAP. We were at z/OS 1.9 at the time also. Claude -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Wednesday,

z10 and HiperDispatch question.

Hello all, I would like to know if any of you have this feature turned on and what benefits have you noticed from it. We are switching to a z10BC U03 this weekend from a z/890 370 and I am interested in what experiences any of you have had. Our WLM policy is okay and I may need to tweak a few

Re: WLM Service Class

If you can suffer the consequences and it is only ONE job, stick it in SYSSTC. Your mileage may vary on this one But monitor EVERYTHING else closely... Claude -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Vernooy, C.P. -

SMS managed storage volumes.

I have a pool of several SMS managed storage volumes that are out of, or soon will be, DSCB's. The ones that are 'USE ATTRIB of PRIV', I can move dsns and extend the VTOC in place via batch job. The ones that are 'USE ATTRIB of STOR', I cannot work with as I get this message, 'ICK31025I VOLUME NOT

Re: SMS managed storage volumes.

Thanks to all who responded. I mounted them PRIVATE and expanded the VTOC as much as I could. Life is now good/better. Regards, Claude Claude Richbourg Florida Department of Corrections z Systems Programmer 850-921-1383 -- For

8 Gig memory in a z9.

We are going to upgrade from a z/890-370 to a z9 BC-X03 soon and of course I'd like to add more memory to it if I can. Does anyone know what an 8 Gig chunk would cost? Ballpark not exact figures unless you know. Thanks up front, Claude Claude Richbourg Florida Department of Corrections Systems

IEANUC0Z module in SYS1.NUCLEUS.

Anybody know what this module does? We are at z/OS 1.9. I was looking around and saw this but cannot find any doc on it. Regards, Claude Claude Richbourg Florida Department of Corrections Systems Programmer 850-921-1383 -- For

TCBD call error.

All, Our test lpar is now on z/OS 1.9 since Tuesday and all is well except for the 'tape processing'. We have a 3494 ATL and a B10 virtual environment. All parts of it are fine except for the VOLCAT. When you start OAM, it cannot communicate with the volcat. Also, when I try to list volumes

Disappearing Master Catalog entries.

This is a strange one and I just opened a PMR with IBM. Scenario: I have a three lpars, one at z/OS 1.9 and two at z/OS 1.7. The 1.9 system is our sandbox area and I am starting the clone of the test lpar to be at 1.9. The driving system has been the sandbox 1.9, which the new master cat is

Re: Disappearing Master Catalog entries.

: Disappearing Master Catalog entries. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Richbourg, Claude Sent: Thursday, June 12, 2008 12:10 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Disappearing Master Catalog entries. This is a strange one

XMITIP and z/OS 1.9

Question on: XMITIP Application level: 4.86. Has anyone tried this on z/OS 1.9? I will be moving 1.9 from our sandbox lpar to test lpar next week and I was curious. I had almost forgotten about this part. Please let me know and I greatly appreciate it. Regards, Claude

SMP/E question on merging DDDEF entries.

Good morning all, The system is z/OS 1.9 and my old nemesis SMP/E. I am trying to build a new TARGET zone. What I want to do is copy ALL the DDDEF information from one TARGET zone to another new TARGET zone. At this point all I want is the DDDEF information, including the volser. I have tried

Re: SMP/E question on merging DDDEF entries.

John, Thank you very much as it worked great. My nemesis grows weaker.. Regards, Claude -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of McKown, John Sent: Wednesday, May 21, 2008 11:34 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: SMP/E

Re: Very poor FTP transfer rate to : testcase.boulder.ibm.com 207.25.253.31 ?

Nope, I had this around 09:00 this morning. EZA1485I 7741440 bytes transferred - 10 second interval rate 222.90 KB/sec. Regards, Claude Claude Richbourg Florida Department of Corrections Systems Programmer 850-921-1383 -Original Message- From: IBM Mainframe Discussion List

IPS default member on z/Os 1.9.

Good morning all, I am curious as to why IPS is still being referenced as a default entry in IEASYS00? Using Mark's IPLINFO utility on our 1.9 system, I see this entry: IPS=00,Default I thought the ICS and IPS went out of town once

Re: Question on *MASTER* address space.

Thank you Ed, Now I know. Regards, Claude Richbourg -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Edward Jaffe Sent: Friday, April 18, 2008 3:20 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Question on *MASTER* address space. Richbourg

Question on *MASTER* address space.

Okay, I've pondered this for awhile and now I would like to see why. Would any of you explain this about the MASTER address space? Question: When I look at the DA screen in our input/output viewer (IOF), it shows the *MASTER* system address space with an 'S00' task number. It has

Re: Moving DASD Volumes from Mod3 to Mod9

One thing that bit us was the size of the VTOC's. When you move a mod-3, 15 track VTOC to a mod-9 and use it within SMS or HSM, you will blow out the VTOC. Please make sure you check what the volume will be used for. Something I inherited...Been there done that. Just another FYI. Claude

SHOWZOS output.

Good morning all, This has been installed on our sandbox lpar running z/OS 1.9. After wrestling with it to get it working, I have run up against a wall. Would any of you who know this CBT utility take a gander at what is going on? I looked up the error code, but do not know what to change, or if

Re: SHOWZOS output.

@BAMA.UA.EDU Subject: Re: SHOWZOS output. Richbourg, Claude wrote: Good morning all, This has been installed on our sandbox lpar running z/OS 1.9. After wrestling with it to get it working, I have run up against a wall. Would any of you who know this CBT utility take a gander at what is going

Re: SHOWZOS output.

Mark, I downloaded file 492 from the CBT Updates section and brought it up to the 1.9 system. Showzos runs with zero return code, but gives the abend within the syslog. It produces output, but not as much as the older SHOWMVS. Thanks to all who have responded and I'll wait for a comment by

Re: SHOWZOS output.

Mmmm, I am at RSU0802 maintenance level and not sure about the other change you made with ISPF. Is the change you made needed in the install process, or is it something you had to do based on your shop? Regards, Claude Claude Richbourg Florida Department of Corrections Systems Programmer

Re: SHOWZOS output.

That is a strange thing, the assembly. The assembly step gets an 8 return code, but looking within the assembly step itself, it has a return code of zero and 'no statements flagged'. I have not been able to figure out why. Snippet from bottom of assembled output. No Statements Flagged in

Re: SHOWZOS output.

Roland, Thanks very much, it worked like a charm. When the assemble and link finished job finished, I ran SHOWZOS and it runs clean. Thank you again for providing this nice tool. And thanks to all who responded as well. Regards, Claude Claude Richbourg Florida Department of Corrections Systems

CBT - TSSO and z/OS 1.9.

Hello all, I have just installed TSSO,(file 404) from the CBT web site on our z/OS 1.9 system. I am having a little difficulty with the sub-system console piece. When I assembled all of the programs, I had this error from the TSSO assemble step: ASMA044E Undefined symbol - UCMMCENT So, I

Re: CBT - TSSO and z/OS 1.9.

. On Thu, 7 Feb 2008 15:59:58 -0500, Richbourg, Claude [EMAIL PROTECTED] wrote: Hello all, I have just installed TSSO,(file 404) from the CBT web site on our z/OS 1.9 system. I am having a little difficulty with the sub-system console piece. When I assembled all of the programs, I had this error from

Re: Data Erasure Products

, 2008 12:45 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Data Erasure Products Richbourg, Claude wrote: There is another one that we have used. It is by NEWERA software and it is, 'DASD FAST ERASE'. It works good as you can do as many passes over the data with different patterns as needed. HTH

Re: Data Erasure Products

There is another one that we have used. It is by NEWERA software and it is, 'DASD FAST ERASE'. It works good as you can do as many passes over the data with different patterns as needed. HTH. Regards, Claude Richbourg -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL

Re: A DADSM error while scratching a dsn.

Well, thanks to all that responded and yes, I deleted the dataset. The dataset in question was a duplicate of a cataloged dataset. I submitted the delete job after I had the user log off TSO. It worked well, dataset gone. Evidently I did not dig deep enough to reason out the codes. But, I won't

A DADSM error while scratching a dsn.

Sending again as I did not get a copy back from the list server. Hello all, This one stumps me for now and I need some help from the group. I am at z/OS 1.7 and in the process of cleaning up un-cataloged datasets on SMS managed volumes. This one that is holding tight is a non-vsam PO dataset.

A DADSM error while scratching a dsn.

Good morning all, This one stumps me for now and I need some help from the group. I am at z/OS 1.7 and in the process of cleaning up un-cataloged datasets on SMS managed volumes. This one that is holding tight is a non-vsam PO dataset. I usually run this JCL to delete them and it works fine:

Re: Delete DS Held by LLA and XCFAS

Here is the process I use with some explanation in my doc. For LLA: TO REMOVE THE LLA ENQUEUE FROM THE DATASET, YOU WOULD EITHER ISSUE AN F LLA,UPDATE=XX POINTING TO A CSVLLAXX PARMLIB MEMBER SPECIFYING REMOVE(CEE.SCEERUN) OR YOU WOULD STOP LLA BY ISSUING P LLA.

Re: Allocating Large SYS1.HASPACE

Use this JCL to allocate all of a 3390-9, or 99% of it. //DEFSPOOL EXEC PGM=IEFBR14 //SYSPRINT DD SYSOUT=* //ALLOCDD DSN=SYS1..HASPACE,DISP=(NEW,KEEP,KEEP), // SPACE=(CYL,9940),UNIT=3390,VOL=SER=XX,

Extend VTOC on a SMS managed volume.

Good morning all. I have four volumes that are 100% full and have no free DSCB's. I usually run an extend vtoc command via ICKDSF. Command follows: REFORMAT DDNAME(VOLDD) VERIFY(STG003) EXTVTOC(29) But since it is not mounted PRIVATE, it gives me a return code of 12. Any suggestions? Thanks

Re: VER Command from TSO for TCP/IP?

NETSTAT from 1.6 will tell you that and more. Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark S. House Sent: Friday, October 26, 2007 8:45 AM To:

Re: IOF QUESTION

Hello Ernie, Yes it is and here are the steps. 1) Select your output and then enter SD on the command line. It will open a panel you can override size and dsn name. Then press enter. 2) Now enter SNAP on the command line. 3) Then enter SNAPCLOS and it is done. Out to the dsn.. Play around

Re: tso racf

Hi William. On the last question you could easily do it this way. Just add the command 'LOGOFF' within thier TSO segment of RACF. Works every time. HTH Claude Richbourg -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Carroll, William Sent:

Re: Problem Deleting DSN

Two ways I have found to accomplish this rather easily. 1) Go to =3.4 and plug in the dasd volser and press enter. Then scroll down until you find your dsn in question. You will then rename it. There should be a prompt that comes up telling/asking you, do you really know what you are doing. As

Top Secret to RACF conversion.

Good afternoon all. We are looking into the possibility of converting from Top Secret to RACF for our security product on the mainframe, z/OS 1.7. I am interested in hearing from anyone who has made this conversion. What I would like to know from those that have are; timelines in getting it

Re: Recataloging IBM virtual tapes

Alan, If you are using a single volcat and shared by all the systems, you may need to sync the TMC on that system. If you have a single volcat per system, then yes, you would need to create entries for the virtual tape in question and treat them as foreign tapes. Hope that helps, Claude Claude

IBMLINK and missing ETR records.

Well, They have a new twist today within IBMLINK. As I logged in to list and update my ETR, low and behold it shows; 'No records were found'. But hey, at least I could log in... Sev 1 ticket # 15076082000 Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383

Re: Upgrading the processor

I used to work with an H50. The three models are: The Multiprise 3000 models H30, H50, and H70. Unless there is something new going on here? ;. Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 -Original Message- From: IBM Mainframe Discussion List

Re: ICC Console

We have ours defined as 3270-X in both places. Regards, Claude Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Lyon Sent: Thursday, July 26,

Re: MEMLIMIT again -- Consensus on Default Size?

As we all know, JAVA and other apps can now be quite a consumer in storage consumption. I have set up a 16G default and we have had no trouble with JAVA so far But, we are going to be ramping up the amount of work done in JAVA, for web apps, so I'll wait and see how that goes. We are CICSTS31.

Re: Off Topic But Concept should be Known To All

Isn't that what they do today in the Windows world??? Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Staller, Allan Sent: Thursday, June 21, 2007 8:18

Re: CICS AEXZ abend outage for zOS 1.8/Top Secret 9.0 users.

Yes, We are one of the 'lucky' ones to experience this first hand. It took awhile to find out what the problem was, as we saw no TSSx messages pointing to the error, just an AEXZ abend. IBM gave us the direction towards CA. I spoke with the technical support manager for CA-Top Secret and he

Re: 3390-MOD's 9

Just a guess, but are you coding, 'DSNTYPE=LARGE'? Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Steely Sent: Thursday, May 31, 2007 3:19 PM To:

Job Vacancy at Florida Department of Corrections.

This posting has been approved by the list owner prior to sending. There is a current opening for a System Programmer III position here in Tallahassee, Florida. Duties include but not limited to: Top Secret, CICS, IMS and Networking. Please look for more information within the State of Florida's

DFHSM cleanup of orphaned MCC records.

Good afternoon all. Operating System is z/OS 1.7. We have an open ETR with IBM about deleting the orphaned records regarding error codes 40 41 within DFHSM. Part of ETR follows: For ERR 40 and ERR 41, audit found orphan MCC records (Backup Control Data Set Backup Version Records). To

Re: Renaming SYS1.VTAMLST

Just run an IEBCOPY with the compress option. It will shrink it back to size. If it needs to be renamed, you may have to bounce VTAM to pick up another new library; SYS1.VTAMLST.NEW. Hope that helps. Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383

Re: Why are they so full ? RE: When Does the New LOCAL Get Used? RE: ILR006E COMMON PAGE DATA SET FULL,...

If you go to =3.4 and put in SYS1.PAGE.*, it will use a wildcard mask and show you all the page datasets. Then press the pf11 key to shift right. You will see how big they are in TRACKS. Then divide each .DATA file by 15 and you will have each size in CYLS. Hope that helped. Claude Richbourg

Costs not to go to z/OS 1.7 by March 31, 2007.

All, For those who have not made the migration off z/OS 1.4 by March 31, 2007, it will become VERY expensive. We are cutting over the end of this month to z/OS 1.7, so we are okay. But, we have found out that if the cutover did not occur by March 31st, it would cost a good deal of money for

Re: Syncsort / DFSORT LPA

If you use Syncsort as your sort product and you have DB2 v8, you will need the DFSORT to make it work. IBM will let you use 'very limited' amount, just for DB2 v8 which requires it. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tim Hare

Re: Full SMF Datasets Not Clearing

The old SMFDUMP program will dump them all to whatever output dataset you choose. We still use it. Claude Richbourg -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Shmuel Metz (Seymour J.) Sent: Thursday, September 28, 2006 12:14 PM To:

JES2 List Server address

Good morning all, For JES2 related questions, what is the current JES2 List Serve address? Thanks much, Claude Richbourg Florida Department of Corrections Systems Programmer 850-921-1383 -- For IBM-MAIN

MPF messages now appearing.

Anyone seen these type messages before? We are at z/OS 1.7, Netview 5.2 and have TSSO from the CBT installed. However, searches of GOOGLE and ASK do not give any hits, nor does the IBM z/OS 1.7 website. Searched the TSSO lib's and no hits either. I am now scratching my head hard as to what has

Mod-9 or Mod-27 for JES2 spool dataset(s).

Good morning all, I am pondering the difference, (Performance-Disaster Recovery-More/Less volumes), for JES2 spool datasets. We are at z/OS 1.7 in one dev LPAR and I am starting the cloning/building process for our production LPAR. We are a mid-size shop with (4) mod-3s used for JES2

Re: Mod-9 or Mod-27 for JES2 spool dataset(s).

, 2006 10:37 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Mod-9 or Mod-27 for JES2 spool dataset(s). On Thu, 2006-09-07 at 08:59 -0400, Richbourg, Claude wrote: Since I can take advantage of the 'Large Dataset Support' for JES2 now, what are the pros/cons of having one mod-27 versus 2 mod'9s? How busy