Hi
Is it possible to change IEASYMxx via operator reply at IPL ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
for a given job.
Not clear in the IXGBRWSE the SEARCH keyword really speeds up the
retrieve or just don't give back the control for the
superfluous records
On 01.06.2012 18:33, John Eells wrote:
Miklos Szigetvari wrote:
Hi
Any fast way to access the SMF log stream ?
Intend to collect, in the SMF
Hi
If you issue a REXX readdir, in the optional stem2 you got the fstat
structure
I'm using from this the st_ctime and st_mtime and convert via the
gmtime function
On 01.06.2012 21:54, Roger Wasley wrote:
Afternoon
I have been attempting to use SYSCALL READDIR and the fstat according to
Hi
Any fast way to access the SMF log stream ?
Intend to collect, in the SMF log stream, the performance records (30,14,15)
for the actual day.
Have an assembler program to browse the log stream from the required date/time,
but it is still very slow
Tried with dump(IFASMFDL) and with
Hi
I think the best you can do to get some LLA fetch statistic and put the
heavily used modules from SCEERUN2 to LPA
(We are using here MXI to get this statistic)
We heavily use here the C++ compiler, so the compiler modules are in the
dynamic LPA.
On 22.05.2012 16:13, Mark Jacobs
Hi
Do you have the chance to compare the speed of the two codes ?
David,
On 2012-05-16 08:23, David Crayford wrote:
Robert,
I'm no expert but I have read that newer hardware models (Z10 and
above) are
essentially RISC processors that run complex instructions in millicode.
In
Hi
Searching for a tool to trace SVC 99(i.e. see the text units)
(I had this several years ago, SLIP or GTF ?, unbale to find now)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi
Is it possible to find the actual EXCP count value in the address spac ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Hi
Thank you foe everybody I will use this
On 5/15/2012 11:37 AM, Rob Scott wrote:
Look at ASCBIOSX and ASCBIOSC in the ASCB (IHAASCB)
ASCBIOSX DSD - I/O service measure extended. @0AC
* This is like ASCBIOSC but it is @0AA
*
Hi
Thank you Ed, it is in DB2, but I will try to SLIP on the allocation error
message, and if not works I wil try the IF trap.
On 5/15/2012 11:26 AM, Miklos Szigetvari wrote:
Searching for a tool to trace SVC 99(i.e. see the text units)
(I had this several years ago, SLIP or GTF ?, unbale
Hi
Any simple tool, to monitor the storage usage of an address space ?
I'm using now the MXI from Rob Scott, and it is very good, but I would
need something like a function call to get this
in a program or in REXX
--
For
, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: 04 May 2012 11:35
To: IBM-MAIN@bama.ua.edu
Subject: Any simple tool
On 03.05.2012 14:22, Tom Marchant wrote:
On Wed, 2 May 2012 13:06:56 +0200, Miklos Szigetvari wrote:
O.k now, but how can I copy an FMID from one target to another ?
BUILDMCS
Hi
Thank you
--
For IBM-MAIN subscribe
Hi
I have received the UA59435 JES2 toleration PTF , but for the APPLY
check I got
GIM37903E ** APPLY PROCESSING FAILED FOR SYSMOD UA59435 BECAUSE IT HAS NO
APPLICABLE ++VER MCS.
Maybe somebody has seen this ?
--
Hi
Thank you, it was not in the selected target, but in another.
O.k now, but how can I copy an FMID from one target to another ?
On 02.05.2012 11:16, Walter Marguccio wrote:
- Original Message -
From: Miklos Szigetvarimiklos.szigetv...@isis-papyrus.com
GIM37903E ** APPLY
Hi
On 02.05.2012 14:59, Walter Marguccio wrote:
- Original Message -
From: Miklos Szigetvarimiklos.szigetv...@isis-papyrus.com
O.k now, but how can I copy an FMID from one target to another ?
Miklos,
what do you want to accomplish, exactly ? Why would you want to copy
an FMID from
Hi
Thank you for the reply.
We have HJE7770 , but for some reason several target zones, and the
FMID is not in the traget zone, I tought to be the active one.
I think it was a missunderstanding between me and the guy from the IBM
who installed z/OS 1.12.
After applying in the correct
If the NETVIEW doesn't logs this, I don't know how to find .
It was issued from NETVIEW
You will not find via SMF.
On 24.04.2012 10:47, Ravi Gaur wrote:
job got S222 from type30 however that doesn't give answer to me who did it..
Nothing in netlog..
Hi
Is there something important in SDSF JES $JOURNAL and $INTTEXT ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Hi
For HFS I would not try with DESERV, but with readdir
On 4/20/2012 2:58 AM, Charles Mills wrote:
I need to be able to process for input all members of a PDS, PDSE, or HFS
folder. I need to process them individually - the order does not matter -
and not as one big concatenated file.
Hi
Can't find the JOBID field on the SDSF PS panel (nor via REXX) .
Do I lost it or I need to customize ?
(z/OS 1.12 missing but I have it on 1.13)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: Friday, April 20, 2012 6:38 AM
To: IBM-MAIN@bama.ua.edu
Subject: Jobid on SDSF PS panel ?
Hi
Can't find the JOBID field on the SDSF PS panel (nor via REXX) .
Do I lost it or I need to customize ?
(z/OS 1.12
(publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Miklos Szigetvari
Skickat: den 20 april 2012 13:11
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: Jobid on SDSF PS panel ?
Hi
Thank you Bob, with ARRANGE ? I don't see it at all, but I don't
[mailto:IBM-MAIN@bama.ua.edu] För
Miklos Szigetvari
Skickat: den 20 april 2012 13:26
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: Jobid on SDSF PS panel ?
Yes , with ARRANGE ? but no JOBID
As far as I can remember it is a default SDSF setup
On 4/20/2012 1:17 PM, Thomas Berg wrote:
Have You tried
to the Unix files.
I think via FTP API the FTP would be also possible
Regards,
Uriel
From: IBM Mainframe Discussion List [IBM-MAIN@bama.ua.edu] on behalf of Miklos
Szigetvari [miklos.szigetv...@isis-papyrus.com]
Sent: Wednesday, April 11, 2012 10:17 AM
Hi
We try to modernize our code here, with relative instructions, long
displacements , immediate s etc etc
What about the control program ?
Just got some REXX IRXINIT dumps, and seems to me the code is not very
modern.
Hi
I appreciate your answer, and understand your point
I have just seen the REXX (System REXX etc ? ) IRXINIT dump, and looked
into the SYS1.SHASSRC.
On 4/12/2012 4:49 PM, John Eells wrote:
Miklos Szigetvari wrote:
Hi
We try to modernize our code here, with relative instructions, long
Hi
Not the same as your case, but we have here HSM exits, to use HFS (Unix)
dataset in the place of ML2
So with this exit we migrate/recall everything from/ to HFS (Unix) .
On 4/11/2012 3:41 PM, Uriel Carrasquilla wrote:
My company is in the process of sun setting our MF.
We have about 40
John I can send the source but it is C++ (and some assembler )
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Miklos Szigetvari
Sent: Wednesday, April 11, 2012 9:17 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: HSM to open systems
Hi
Probably no exact your case
We had a C++ application main program (LE enclave), we got some errors
as tried to call from COBOL LE
We inserted a small LE conform assembler routine between the COBOL and
C++, it issued a BPX1SDD DUB process and
an ATTACH to attach the C++ main program .
Hi
I would look into the LE callable services
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/CEEA31B0/CCONTENTS?SHELF=CEE2BKB1DN=SA22-7562-12DT=20100625181724
On 3/27/2012 11:19 AM, Arye Shemer wrote:
Hello distinguished forummers,
I need help in finding a method of converssion
On 3/27/2012 11:19 AM, Arye Shemer wrote:
Hello distinguished forummers,
I need help in finding a method of converssion Epoch (Unix) time to
printable format in an Assembler program,
Any clue how to achieve this ?
Thank you,
Arye Shemer.
Hi
Any end of the story ?
On 3/21/2012 4:38 PM, Tim Brown wrote:
What can be done to prevent REXXX programs from being so CPU intensive
Thanks,
Tim Brown
Systems Specialist - Project Leader
Central Hudson Gas Electric
284 South Ave
Poughkeepsie, NY 12601
Email:
The CPU usage of the compiled REXX code was here, about 1/10 of the
interpreted REXX code.
On 3/21/2012 4:38 PM, Tim Brown wrote:
What can be done to prevent REXXX programs from being so CPU intensive
Thanks,
Tim Brown
Systems Specialist - Project Leader
Central Hudson Gas Electric
Hi
We are now in 2012 and thing are occurring in mill or nanosecond
intervals, but some functions still working in seconds range.
Disturb me ,:
- the JES job-log time stamps are in seconds
- LOGREC IFCEREP query in seconds
If someone has an idea to overcome this
Hi
(As it is Friday)
We have customers complaining (and they have right) about a CPU usage
for an idle STC about 0.04 CPU second/hour.
On 3/15/2012 8:24 PM, Gibney, Dave wrote:
Between little and none :) IMHO
Dave Gibney
Information Technology Services
Washington State University
Hi
I see 7 backupcopies, but 6 datasets.
(I have here 2 backupcopies and 2 datasets)
Cant happen that the D0003982 has gone ?
On 3/15/2012 2:28 PM, George Rodriguez wrote:
Hi Paolo,
Every single one looks like this:
Data Set Name . . . . : DFHSM.MCDS.BACKUP.D0003983
General Data
of Palm Beach County
3348 Forest Hill Blvd.
Room B-241
West Palm Beach, FL. 33406-5869
Florida's Only A-Rated Urban District For Seven Consecutive Years
- Original Message -
From: Miklos Szigetvari [mailto:miklos.szigetv...@isis-papyrus.com]
Sent: Thursday, March 15, 2012 09:39 AM
To: IBM
Hi Dana
For me this script:
/* REXX */ .
say 'Content-type: text/html' .
say '' .
say 'PRE' .
say 'test jes interface' .
say '' .
rc=isfcalls('ON') .
.
/*/ .
/* Issue the WHO command */ .
/*/ .
Address SDSF ISFEXEC WHO .
.
On 3/2/2012 2:23 PM, Dana Mitchell wrote:
Thanks Miklos,
Perhaps since we are different releases:
MVS=z/OS 01.11.00
JES=z/OS1.11
SDSF=HQX7760
explains the different behaivor. But I have worked around this issue. My
remaining issue is that I cannot get the REXX to successfully read a
Hi
There is a rxenv.sh in the samples, it would print out the envars ,
and I have
_BPX_USERID=esa
REMOTE_USER=esa
so just to see if it is running under the correct USER
On 2/29/2012 6:08 PM, Dana Mitchell wrote:
On Wed, 29 Feb 2012 16:16:41 +0100, Miklos
SMF70ONT
Rob Scott
Lead Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent
: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: 01 March 2012 09:40
To: IBM-MAIN@bama.ua.edu
Subject: Re: Processor usage
Hi
One important point :
We would like
Hi
My colleagues would like to know the processor usage for every processor
on the machine or on the current LPAR .
Any way to find out something like this: CPU1 was busy 50% in the last
1 minute and CPU2 was busy in 10%
Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: 29 February 2012 09:18
To: IBM-MAIN
On 2/29/2012 10:34 AM, Vernooij, CP - SPLXM wrote:
Out of curiosity, are your colleagues going to use this to
schedule/attach work, probably to processors? If you are trying to be
smarter than WLM, PR/SM, Hiperdispatch and all the other CPU management,
you will hit your nose hard.
Hope they
: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: 29 February 2012 10:26
To: IBM-MAIN@bama.ua.edu
Subject: Re: Processor usage
Hi
Just looking into the SMF 70 records.
Till now don't see the processor usage (or see , just don't understand
On 2/29/2012 3:27 PM, Dana Mitchell wrote:
I'm working on a simple REXX/SDSF/CGI exec to display output from selected
STC's via browser and HTTP server on z/OS 1.11. I can get it to partially
work, but there seems to be some inconsistencies in the way userid's are
handled.
If I run a REXX
Hi
Thank you Kirk
It is completely new for me also(i.e. REST), but about the performance.
Are you sure that it is faster as SDSF/REXX ?
I mean, I have never seen something slower as zOSMF.(We are in z/OS 1.12)
On 2/29/2012 4:10 PM, Kirk Wolf wrote:
Have you looked at the new z/OS Jobs
Hi
Can I find out the actual LPAR CPU usage from a program , without RMF .
(Via RMF and SMF 70 records we can get this, but we would need a direct,
non authorized call to query this value)
--
For IBM-MAIN subscribe / signoff
Hi
I used to say : With the SDSF REXX interface you can process the
output in the next STEP, but lately we have tested this again, and got
some
error codes during processing the own job. (i.e sfmsg is:JCT NOT
AVAILABLE )
Anyhow if you submit a job to process the JES output from the
,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Miklos Szigetvari
Skickat: den 27 februari 2012 15:52
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV
Hi
We generated GDG's from a job. ,
The problem is with EMPTY GDG , for DISK , the dataset exists , for tape
no new generation
Can we handle this from JCL ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
. -The Chesapeake Life Insurance
Company(r), Mid-West National Life Insurance Company of TennesseeSM and The
MEGA Life and Health Insurance Company.SM
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Miklos Szigetvari
Sent: Tuesday, February 21
On 2/22/2012 3:15 AM, Phil Smith wrote:
Anyone have an example of an ENF listener that works? We're having a devil of a
time getting one going (ENF Event Code 37, SMF listener). We can get it loaded
in CSA but it never gets woken up!
Thanks,
Hi
Off-list I can send you my one
Hi
Thank you, Hope not so dangerous, they refer I think something like
JOBLOG or SYSLOG or JESMSGLG , but they are using this phrase.
We will ask
On 2/20/2012 10:08 AM, Michael Klaeschen wrote:
sysbinlog was an SQL table created by StuxNET worm/virus/malicious code.
Part of the virus code
Hi
One of our customer is speaking about SysBinLog in z/OS
Maybe somebody knows what is this.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO
Hi
Try to search in the archive/and got server errors
for /http://bama.ua.edu//archives///ibm/-/main
/
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message:
Hi
Wit the ISPF Dialog Test you can trace/debug the dialogs
On 2/16/2012 9:00 AM, Alvaro Guirao Lopez wrote:
Hi List,
I'm installing a product in a client and when I invoked the primary panel
of the installation, one of the selections don't do anything when I select
it with an 's'.
I have
Hi
Hi
With the REXX SDSF interface you can access the SYSOUT etc .
What do you mean about last CICS JOBS on SYSOUT ?
If the CICS is ending you can insert maybe a STEP to do this save/edit
etc actions you need .
On 2/15/2012 12:59 PM, Sérgio Lima Costa wrote:
Hello List,
We need all days
EXECUTION SYSA SYSA
CICSP1 STC06488 USRCICP 1 PRINT HOLD
The file, that I need look, is the Jobid STC03526, Position 3278.
Regards.
Sergio
-Mensagem original-
De: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] Em nome de
Miklos
Hi
On 2/7/2012 7:28 PM, Itschak Mugzach wrote:
Hi Avram,
The program does not operate in any way under IMS. The only reason I
mentioned IMS was that is is an alternative to LE...
If you can tell, in which environment this program works ?
How and who starts 10 times /second ?
ITschak
On
Hi
Tested with 1.11 no problem like this .
Did you get ERBPPUT panel ?
Something with SUBMIT ?
You could see maybe with Edit generated JCL YES
On 2/8/2012 2:36 PM, Dansinthecarolinas wrote:
We are running z/OS v1r11. Using the RMF panels, option 1 for postprocessor I
get an IKJ56231I FILE
On 2/8/2012 7:38 AM, Brian Westerman wrote:
He wants to be able to access the OUTPUT statement fields from inside his
program. I think he wants to be able to pass information, or act on the
information contained there. He said he spent weeks trying on his own, and I
looked around, but
On 2/3/2012 12:04 PM, Itschak Mugzach wrote:
I have a C program that is called intensively more then 10 times per
second. As it runs under LE, it requires LE to re-create the language
execution environment which is a huge overhead for a small and short
running program. I want to eliminate LE to
Hi
Anyhow are you sure the LE environment creation is the overhead ?
I mean maybe the program load/delete can be also a problem .
With the LE RUNTIME options , STACK HEAP allocation also you can
increase the performance, but it would be not bad to see
there is the problem, before do
Hi
I also wanted to get the JESJCLIN a while ago, asked here the newsgroup,
and the suggestion was to use SDSB.
As far as I can remember you always have a JES token via SAPI, and with
this token and SDSB you can allocate the JESJCLIN.
On 1/23/2012 3:22 PM, ESHEL Jonathan wrote:
Hello,
Hi
Now-days you can change (almost) everything without IPL.
Can you change the SDUMP post exit without IPL ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the
Any idea to speed up the SDSF REXX interface ?
Til now:
- we put the ISFLINK to LPA
- using compiled REXX
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message:
On 12/22/2011 11:48 AM, Sérgio Lima Costa wrote:
I wish you all a Merry Christmas and a prosperous new year.
Greetings from Sao Paulo.
Sergio Lima Costa
São Paulo - Brazil
Atenção: Esta mensagem foi enviada para uso exclusivo do(s) destinatários(s)
Hi
RC4 encryption type supported on Kerberos z/OS ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
On 12/13/2011 1:51 PM, Paul Gilmartin wrote:
I'd like to be able to write a portable script (or EXEC) which
uses the jar command. I find:
On OS X:
507 $ type java jar
java is /usr/bin/java
jar is /usr/bin/jar
On Solaris:
133$ type java jar
java is /usr/java/bin/java
On 11/28/2011 4:01 PM, Betsy Jeffery wrote:
Can the SWA for TSU jobclass be 'ABOVE'? I seem to remember back in the dark
ages it used to be restricted to 'BELOW' but the manuals don't specify. I'm
guessing it can be either due to no specifications in the JOBCLASS(TSU) doc.
Thanks,
Betsy
Hi
I would need the IEFU85 exit , to get control during the write of 92
(USS File Activity) records.
Can I use here USS calls ?
Would like to send the record to an IPC message queue.
--
For IBM-MAIN subscribe / signoff /
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.617.614.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Miklos Szigetvari
Sent: 18 November 2011 11:34
To: IBM-MAIN
Company(r), Mid-West National Life Insurance Company of TennesseeSM and The
MEGA Life and Health Insurance Company.SM
-Original Message-
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Miklos Szigetvari
Sent: Friday, November 18, 2011 8:26 AM
To: IBM-MAIN
Hi
I'm asking for the last state to get notification at file updates.
My colleagues planning an application, would run on all possible
platforms, and would get notification, if a file has
changed/renamed/scratched in a file system.
In z/OS it would be enough to deal with a DSN qualifier
, there is an equal and opposite criticism.
Systems Programming: Guilty, until proven innocent John Norgauer 2004
-Original Message-
From: Miklos Szigetvari [mailto:mik...szi...@isicom]
Sent: October 10, 2011 05:25
Subject: Web page , link to all (most) z/OS messages
Searching something like
Hi
The EPERM(139) error number can occur during the call of several kernel
functions.
I think you need to know in which function you got this EPERM(139) error.
Maybe the simplest way to modify the code, end extend this rc= -1
errno1 139 with some trace-back, dump .
RACF setting, USS
Hi
Searching something like Lookat, which would contain all (or most) of
the z/OS messages.
In the Lookat there is no DB2, CICS, MQ etc etc
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi
It was me, not Radoslav, who put this disputed question .
The idea not from the z/OS side, but we have a client/server object
oriented product, run in several platforms, and it has a
feature to display the CPU utilization, disk-load, network-load etc. etc.
So maybe the client user has no
Hi
Would like to see the CPU utilization /CPU engine.
Any simple way to get this ?
We use currently the RMCT and CCT (RM CPU Management Control Table) to
get CPU utilization quickly.
--
For IBM-MAIN subscribe / signoff /
On 10/4/2011 4:57 PM, R.S. wrote:
W dniu 2011-10-04 16:06, Miklos Szigetvari pisze:
Hi
Would like to see the CPU utilization /CPU engine.
Any simple way to get this ?
IMHO quick and simple way is to use HMC.
Hi
I would need in a program
Hi
If you mean about the TGNUM the JES TrackGroupNumber, the job is writing
into the SPOOL.
This output has any significance ?
Maybe if you set the OUTLIM and/or the CPU limit you could get a DUMP
Not a COBOL expert at all, but maybe the FLOW LE runtime option ?
On 9/19/2011 12:58 PM,
Hi
Mine nearly the same:
RESMGR ADD, *
TYPE=TASK,TCB=CURRENT, *
TOKEN=WORK_RMGR_TOKEN, *
ROUTINE=(BRANCH,(3)), *
Hi
I found a C++/assembler program from 1995.
(The assembler to READ VTOC)
It has read the CCW trace , and reported the DSN names and counts from
the VTOC.
On 9/14/2011 10:42 PM, Staller, Allan wrote:
I have a DASD volume with very high activity and will be running a CCW
trace to gather
Hi
Reading the ENF descriptions, seems to me, for the first , a
useful facility would be to listen to a number of ENF events,
and send some alerts if something wrong.
I mean SRM event or config change or SMF ended etc etc .
To this general alert contradict the ENF description in
On 9/9/2011 9:39 AM, Thomas Berg wrote:
I have a need to split loadmodules into separate modules.
E g: a load module, A, is consisting of three submodules, A, B and C. I want
to split it into three separate modules into a loadlibrary.
Is there a more convenient way to do this other than
Hi
Some BINDER options: NE (non editable) and/or STRIPSEC to decrease the
size of a load module
On 9/9/2011 2:19 PM, Thomas Berg wrote:
I'm not going to RUN these delinked modules!
They are just for the BIND MANAGER to read and search for whatever (contoken I
assume).
(They are just indata
Hi
Would like to send SMS from z/OS in case of an alert situation.
My mobile provider forwards Email's to mobile if the priority of the
Email is highest .
(other providers has other rules? )
How can I set the priority in an SMTP message ?
AM, Miklos Szigetvari
miklos.szigetv...@isis-papyrus.com wrote:
Hi
Would like to send SMS from z/OS in case of an alert situation.
My mobile provider forwards Email's to mobile if the priority of the Email
is highest .
(other providers has other rules? )
How can I set the priority in an SMTP
Hi
Thank you very much , at last with
X-PRIORITY: 1
worked (got the SMS)
On 9/4/2011 3:25 PM, Mike Schwab wrote:
http://docs.bvstools.com/home/mailtool/releasenotes
Try adding this line:
PRIORITY: URGENT
On Sun, Sep 4, 2011 at 7:40 AM, Miklos Szigetvari
miklos.szigetv...@isis-papyrus.com
On 9/1/2011 10:05 PM, Steve Warren wrote:
If you have z/OS BCPii installed on your system, you can code HWILIST
ListType=HWI_LIST_LOCALCPC in a simple authorized application to get the SNA
name of the CPC you are running on. To get a list of all CPCs that are
connected to your CPC, simply do
Hi
If someone can advice , how can I find the SNA name of the CPC
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at
Hi
Thank you
The HMC CPC details contains the SNA name , seems to me default is
IBM390PS.xxx ,there xxx is the CPC name
On 8/31/2011 9:08 AM, R.S. wrote:
W dniu 2011-08-31 08:36, Miklos Szigetvari pisze:
Hi
If someone can advice , how can I find the SNA name of the CPC
Some methods:
HMC
Hi
Would try with a SLIP trap with proper SDATA and JOBLIST options
On 8/31/2011 1:16 PM, Robin Atwood wrote:
Barbara -
First, thanks for the speedy response!
I assume by option 4 you mean the Dump Inventory (which is option 6
here). The LD command showed that only ASIDs 1 and 154 were
Hi
If someone has interest in zOS USS z9 etc. etc. in Austria , Vienna
maybe contact off list.
(it is necessary to be here)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi
Just curious
What do you expect to see in a monitoring dashboard ?
As we are a small test shop, I have limited ideas, what would be
important to see
On 8/26/2011 9:30 AM, Elardus Engelbrecht wrote:
To all,
Many many THANKS to all who replied to me on this list and also offline.
All
Hi
Any RACF privilege necessary to use SAPI (Sysout Programming Interface) ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the
Hi
Return Code Description Programmer Response
100 Catalog Management has detected an error while processing the request.
* Reason Code 4: at least one data set entry is returned with an error.
* Reason Code 8: at least one catalog entry is returned with an error.
1 - 100 of 543 matches
Mail list logo