get that to work. Otherwise it will probably be another nail in the
coffin of Roscoe.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Mark Zelden
Sent: Tuesday, March 11, 2014 4:31 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: CA-Roscoe
Roscoe is no longer in use here but I do have an exit.
It depends on two facility classes being defined in RACF.
ROSCMD to allow access to issuing commands
ROSCON to allow access to viewing the console
This is similar to having tables of users defined in the exit but this way the
RACF admin
Jousma, David wrote:
CA does provide a very simple exit to allow for authority checks, but is very
rudimentary, and uses a hardcoded ID table.
Hardcoded table Horrible! Thats so ancient... ;-)
What I am looking for is if someone has already written code to do appropriate
SAF checks on
be nothing
to do in any exits
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Elardus Engelbrecht
Sent: Tuesday, March 11, 2014 9:28 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: CA-Roscoe shops around?
Jousma, David wrote:
CA does
Jousma, David wrote:
Thanks. I have plenty of examples of that. Not a problem. I appreciate
that offer though. These will all be 3rd party calls.
Ok. That is Ok.
To really complete a job that CA has not done, I am going to have to do a
couple of SAF calls. Will need a call for
It's been a few years, but we tried to do this and could never get it to work
properly. We finally just disabled the console command completely from within
Roscoe - and we eventually got rid of Roscoe as well.
Todd Burrell, PMP, ITIL Expert, CISSPĀ | Project Manager | ITSO AHB | Centers
for
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Elardus Engelbrecht
Sent: Tuesday, March 11, 2014 10:26 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: CA-Roscoe shops around?
Jousma, David wrote:
Thanks. I have plenty of examples of that. Not a problem. I appreciate
Do you have TSO/ISPF and SDSF? Or CA Sysview? Or any other tool
to use for sysprogs / operations so you can just leave Roscoe as is
with read only console access to those you chose to let use the
command at all? Or you could just use CONSOLE under TSO, that
isn't much worse than the Roscoe