VTOC V(SMS013) SP
IKJ56500I COMMAND VTOC NOT FOUND
***
On Thu, Feb 21, 2008 at 1:01 PM, willie bunter [EMAIL PROTECTED]
wrote:
Mark,
Allow me to add my 2 bits. Try the following:
A)TSO OPTION 6
B) Enter command :VTOC V(XX) SPxx=volser
C) In the STATUS it will post SMS
VTOC V(SMS013) SP
IKJ56500I COMMAND VTOC NOT FOUND
***
VTOC is not a standard IBM-Supplied command.
The original poster of this, may not know that.
But, I googled it and found this link:
www.jaymoseley.com/hercules/cbtware/vtoc.htm
-
Too busy driving to stop for gas!
Subject: Re: SMS managed volume
VTOC V(SMS013) SP
IKJ56500I COMMAND VTOC NOT FOUND
***
VTOC is not a standard IBM-Supplied command.
The original poster of this, may not know that.
But, I googled it and found this link:
www.jaymoseley.com/hercules/cbtware/vtoc.htm
-
Too busy driving to stop for gas
Mark,
So many great options. Thanks very much.
I did find a problem with using D SMS,VOL=(volser) It reports a volume
as
not defined
CBR1064I Command rejected. Volume serial number
SMS013 undefined.
But IEHLIST shows that it SMS managed.
So I obviously have some issues from my
mark,,
The Not defined can mean:
Not defined means that the storage group or volume (specified on this
command) is specified in the SMS configuration as not being connected
to this MVS system. If the storage group or volume is not defined in
the active configuration, a
Mark,
H. could you try PRTVTOC instead of VTOC?
Maybe this could be in IN-HOUSE command. I'll look around.
Mark Pace [EMAIL PROTECTED] wrote:
VTOC V(SMS013) SP
IKJ56500I COMMAND VTOC NOT FOUND
***
On Thu, Feb 21, 2008 at 1:01 PM, willie bunter
wrote:
Mark,
Allow me to
In a message dated 2/22/2008 7:29:35 A.M. Central Standard Time,
[EMAIL PROTECTED] writes:
You can find a current version at the cbt site.
Right. _www.cbttape.org_ (http://www.cbttape.org) IIRC this function is also
available via PDS command on file182. From long ago and far away Linea
On Wed, 20 Feb 2008 10:05:06 -0500, Mark Pace [EMAIL PROTECTED]
wrote:
Is there an easy way to tell if a DASD volume is SMS managed or not?
--
Mark Pace
Mainline Information Systems
--
For IBM-MAIN subscribe / signoff /
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS managed volume
So many great options. Thanks very much.
I did find a problem with using D SMS,VOL=(volser) It reports a volume
as
not defined
CBR1064I Command rejected. Volume serial number
SMS013 undefined.
But IEHLIST shows that it SMS managed.
So
So many great options. Thanks very much.
I did find a problem with using D SMS,VOL=(volser) It reports a volume as
not defined
CBR1064I Command rejected. Volume serial number
SMS013 undefined.
But IEHLIST shows that it SMS managed.
So I obviously have some issues from my migration from 1.7
Mark Pace [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
So many great options. Thanks very much.
I did find a problem with using D SMS,VOL=(volser) It reports a
volume as
not defined
CBR1064I Command rejected. Volume serial number
SMS013 undefined.
But IEHLIST shows
Mark,
Allow me to add my 2 bits. Try the following:
A)TSO OPTION 6
B) Enter command :VTOC V(XX) SPxx=volser
C) In the STATUS it will post SMS if the pack is under SMS.
P.S. You can enter VTOC V(X) SP which will give you all dasd starting with
X.
Good
On Wed, 2008-02-20 at 10:05 -0500, Mark Pace wrote:
Is there an easy way to tell if a DASD volume is SMS managed or not?
IEHLIST will tell you in a LISTVTOC.
--
David Andrews
A. Duda and Sons, Inc.
[EMAIL PROTECTED]
--
For
Mark Pace [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
Is there an easy way to tell if a DASD volume is SMS managed or not?
--
Mark Pace
Yes, ask SMS:
D SMS,VOL(volser)
Kees.
**
For information, services
Mark Pace wrote:
Is there an easy way to tell if a DASD volume is SMS managed or not?
ISMF 2.1.1
--
Radoslaw Skorupka
Lodz, Poland
--
BRE Bank SA
ul. Senatorska 18
00-950 Warszawa
www.brebank.pl
Sd Rejonowy dla m. st. Warszawy
XII Wydzia Gospodarczy Krajowego Rejestru Sdowego,
nr
If you have QuickRef it will tell you.
Lizette
-Original Message-
From: Mark Pace [EMAIL PROTECTED]
Sent: Feb 20, 2008 10:05 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: SMS managed volume
Is there an easy way to tell if a DASD volume is SMS managed or not?
--
Mark Pace
Mainline Information
If you have TASID, UCB under option 5 (Miscellaneous displays) would provide
that indicator.
I think even SHOWZOS (SHOWMVS) provides that information. I do not have it
installed here to ascertain this claim.
-Gani
Mark Pace wrote:
Is there an easy way to tell if a DASD volume is SMS managed or
FDR Report will tell you. Just ask for the VLSMSTAT field in the report.
It will display Managed if the volume is SMS managed and NONE if it is
not.
Tom Moulder
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Mark Pace
Sent: Wednesday,
-Original Message-
From: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Pace
Sent: Wednesday, February 20, 2008 9:05 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: SMS managed volume
Is there an easy way to tell if a DASD volume is SMS managed or not?
--
Mark,
There were lots of good answers to your question. I'll add MXI to the
list of tools.
But for my money, Kees reply was not only the first; it is the easiest
for one volume. What I did not like, however, is that the error message
text of CBR1064I that accompanies the D SMS command does
, Terry
Sent: Wednesday, February 20, 2008 12:52 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS managed volume
QuickRef will tell you whether the volume belongs to an SMS storage
group, but will not tell you whether the volume is SMS managed.
Because, it does not indicate whether the STORAGEGROUP has been
-Original Message-
From: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] On Behalf Of Tom Moulder
Sent: Thursday, 21 February 2008 6:37 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS managed volume
FDR Report addresses both issues to give an accurate picture
and will also
22 matches
Mail list logo
