Joseph Reichman wrote:
>I have been getting S0C4 pic 11 11 meaning not a translation error or a
>invalid address but that it wasn’t allocated
What is 'pic 11 11'? Just like the other wizards, I am also confused by what
you wrote.
Please post the full Abend message(s) and all the return and
Mr. Joseph Reichman tends to think his code is super sekrit and thus asks
for help supplying minimum detail rather than simply providing the code so
that we can figure it out.
On Wed, 13 Mar 2019 06:45:32 + Anthony Thompson
wrote:
:>I believe the OP is referring to the system trace table
I believe the OP is referring to the system trace table entries for a page
fault.
Ant.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Elardus Engelbrecht
Sent: Wednesday, 13 March 2019 4:02 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject:
Hi All,
i am planning to migrate the spool volumes using $MSPL command and i have
already completed spool migration on other plexes.
But here the scenario is different, we have 6 Mod-54 volumes and all the
volumes are not fully allocated and only 50% allocated, so i am planning to
migrate and
I am pleased to invite you to a GSE Large Systems Working Group event. The
event will be a virtual event via WebEx on the 28th March 2019 from 15:00 –
17:30 GMT.
The event will contain 2 sessions presented by Kelly Vogt from Compuware and
Stephen Warren from IBM.
* Introducing the
Mike Schwab wrote:
>PIC is Program Interuption Code. Printed page 72 of
>GA22-7000-4_370_Principles_Of_Operation_Sep75.pdf shows this to be page
>translation error. That means the logical page references is not in CORE
>(RAM). The operating system need to read in the logical memory from
I am trying to use the TAPEMAP utility downloaded from the web .cbttape.org
and
I want to use it on some cartridges that have several files in "standard label"
(SL) format
but I do not know the DSN of them.
I would like to be able to obtain a TAPEMAP report with the content of the
files in
The problem I have is that I do not know how many files there are in cartridges
that have been
recorded as SL.
I am trying to use the TAPEMAP program of the CBTTAPE.
My jcl has the following format:
// STEP0010 EXEC PGM=TAPEMAP
// STEPLIBDD DSN=CBTTAPE.LINKLIB,DISP =SHR
// SYSPRINT DD
PIC is Program Interuption Code. Printed page 72 of
GA22-7000-4_370_Principles_Of_Operation_Sep75.pdf shows this to be
page translation error. That means the logical page references is not
in CORE (RAM). The operating system need to read in the logical
memory from paging files and retry the
Please
Please let me better explain I have a program
That browses storage I do VSMLOC to verify if the storage was allocated if not
I use STORAGE OBTAIN with inaddr parm I was wondering if/ why there was wasn’t
anything comparable in 64 bit mode
> On Mar 13, 2019, at 6:44 AM, Mike
looks like this mount for the tape is in a library server? and the tape will
not mount?
is this tape in the library?
if this tape is not inside the library do you have standalone tape drive to
read this tape?
change the JCL then to specify the correct esoteric tape device
that message
NB if the underlying volumes are thin provisioned, then the unused space is not
using any capacity.
Worth considering if it makes your migration simpler.
Ron Hawkins
Director, Ipsicsopt Pty Ltd (ACN: 627 705 971)
m: +61 400029610 | h: +61 387399252 | f: +1 4087912585 | email:
UNIT = 3490, LABEL = (, BLP, EXPDT = 98000),
theres your answer right there. BLP = bypass label processing.
Youre getting these messages:
IEC502E R 0580, S03815, SL, TAPEMAP, STEP0010
IEC501A M 0580, TAPAWS, NL ,, TAPEMAP, STEP0010, AMSOURCE.AWS
because you are not authorized to use BLP. So,
On Wed, 13 Mar 2019 08:00:14 -0400, Joseph Reichman wrote:
>Please let me better explain I have a program
>That browses storage I do VSMLOC to verify if the storage was allocated if
>not I use STORAGE OBTAIN with inaddr parm I was wondering if/ why there was
>wasn’t anything comparable in 64
If the DSORG supports multivolume, then add UNIT=(,5) to everything that opens
the file for output.
That does not mean the IEFBR14 that allocates it; you want the program that
writes to it.
You can do this with the DATACLAS as well, with or without using SCR, but with
a large number of
Good catch Joe, I need my morning Joe before I start replying to posts :(
Carmen Vitullo
- Original Message -
From: "Joe Monk"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Wednesday, March 13, 2019 7:31:48 AM
Subject: Re: How to obtain DSN's on a cartridge on SL laber format
UNIT = 3490,
In article <9784938220113382.wa.m42tomibmmainyahoo@listserv.ua.edu> you
wrote:
> On Wed, 13 Mar 2019 08:00:14 -0400, Joseph Reichman wrote:
> >Please let me better explain I have a program
> >That browses storage I do VSMLOC to verify if the storage was allocated if
> >not I use STORAGE
On Wed, 13 Mar 2019 05:44:42 -0500, Mike Schwab wrote:
>PIC is Program Interuption Code. Printed page 72 of
>GA22-7000-4_370_Principles_Of_Operation_Sep75.pdf shows this to be
>page translation error. That means the logical page references is not
>in CORE (RAM). The operating system need to
On 3/13/2019 8:10 AM, Bill Bishop (TMNA) wrote:
Information Security is asking Mainframe Management if JBOSS virus attacks can
infect a mainframe.
And if you want to give your Sec guys and gals conniption fits, point
'em to our good friend Bigendian Smalls's website about hacking
Joe Monk wrote:
>UNIT = 3490, LABEL = (, BLP, EXPDT = 98000),
>theres your answer right there. BLP = bypass label processing.
>Youre getting these messages:
>IEC502E R 0580, S03815, SL, TAPEMAP, STEP0010
>IEC501A M 0580, TAPAWS, NL ,, TAPEMAP, STEP0010, AMSOURCE.AWS
>because you are not
I've never been in any shop with MVS DITTO, (VSE but not MVS). How about
UDACS?
Dana
On Wed, 13 Mar 2019 08:30:34 -0500, Elardus Engelbrecht
wrote:
>
>>Otherwise, I'd suggest you use DITTO.
>
>Good suggestion.
>
--
For
Thanks for your help will post tonite when I get home
> On Mar 13, 2019, at 9:52 AM, Gord Tomlin
> wrote:
>
>> On 2019-03-13 08:00, Joseph Reichman wrote:
>> I have a program
>> That browses storage I do VSMLOC to verify if the storage was allocated if
>> not I use STORAGE OBTAIN with
UDACS is an IBM IUP circa 1981 that was a "Universal Dump Alter Copy and
Select" utility to massage files. (that we still have at my current location).
Although nowadays DFSORT/SYNCSORT is light years ahead in function and
performance wise, but at the time it was pretty nifty.
MVS/DITTO
> On Wed, 13 Mar 2019 09:29:56 -0400, Don Poitras wrote:
> >> On Wed, 13 Mar 2019 08:00:14 -0400, Joseph Reichman wrote:
User-Agent: tin/2.4.2-20171224 ("Lochhead") (UNIX) (NetBSD/7.1.2 (amd64))
Again, I'm just guessing. If the storage isn't there and I obtain it,
then I'm the first caller and I
The question is a bit broad. If your security and system administration is
sound then problem state programs should not be able to compromise system
security. They can impact the system through DoS or other annoyances but that
applies to all problem state programs not jBOSS specifically.
On 3/13/2019 8:10 AM, Bill Bishop (TMNA) wrote:
Are there ways for a JBOSS call to infect a mainframe?
Any program in USS could conceivably execute malicious code with
whatever privilege the process launching it has.
If so, what would our options be to prevent other than a solid RACF
On 2019-03-13 08:00, Joseph Reichman wrote:
I have a program
That browses storage I do VSMLOC to verify if the storage was allocated if not
I use STORAGE OBTAIN with inaddr parm
So your program is browsing (virtual) storage, and if it encounters an
address that is not allocated it obtains
http://www.jaymoseley.com/hercules/cbt_ware/tapemap.htm is a good example.
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.ieab600/iea3b6_Syntax43.htm
If you are using a modern z/OS that has promoted DCB parameters, IBM's
suggestion is to take it out of the LABEL
On Wed, 13 Mar 2019 09:29:56 -0400, Don Poitras wrote:
>In article <9784938220113382.wa.m42tomibmmainyahoo@listserv.ua.edu> you
>wrote:
>> On Wed, 13 Mar 2019 08:00:14 -0400, Joseph Reichman wrote:
>
>> >Please let me better explain I have a program
>> >That browses storage I do VSMLOC to
That makes sense, if you describe it differently:
We have a similar thing, we have a controlblock pointed from CVTUSER. If the
pointer is not filled, the controlblock does not exist, so we getmain it and
put its pointer in CVTUSER.
So then: "if the storage is not there" actually means: "if the
Information Security is asking Mainframe Management if JBOSS virus attacks can
infect a mainframe.
As usual, it falls to me answer.
Are there ways for a JBOSS call to infect a mainframe?
If so, what would our options be to prevent other than a solid RACF environment?
Thanks
Bill Bishop
Ok, I'll bite -- What is UDACS please?
Don't know about other shops but DITTO/ESA is what gets invoked here when you
browse a VSAM file from ISPF 3.4. Probably a local command substitution in
ISPCMDS, but it "just works". I suppose it could as easily be IBM File Manager
or one of the ISV
That lets you install a PTF on the sysres that matches your target zone, but
what happens if you need the PTF on a different sysres?
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List on behalf of
Carmen
Wonder why this functionality is not available above the bar
> On Mar 13, 2019, at 11:35 AM, Vernooij, Kees (ITOP NM) - KLM
> wrote:
>
> That makes sense, if you describe it differently:
> We have a similar thing, we have a controlblock pointed from CVTUSER. If the
> pointer is not filled,
When I obtain maintenance for an RSU (e.i. for Db2 RSU1902).
I receive and apply, then implement first in one of our 2 sand boxes, leaving
our 2nd sand box at our prior maintenance level.
My question is, before I have rolled out the new maintenance, what if I need a
one off PTF for the prior
On Wed, 13 Mar 2019 12:30:35 -0500, Bill Giannelli
wrote:
>When I obtain maintenance for an RSU (e.i. for Db2 RSU1902).
>I receive and apply, then implement first in one of our 2 sand boxes, leaving
>our 2nd sand box at our prior maintenance level.
>My question is, before I have rolled out the
I've seen so many different ways to do this, for me they easiest way;
I maintain one CSI for ZOS, and one target zone, I maintain different levels of
the base/maint on different SYSRES volumes, give me a way back if needed and
the ability to apply those one-off's and test and move to an
thanks for the reply!
Please excuse the rookie questions, but that means one global, clone the target
and dlib before apply.
then lets say I need a one-off ptf to the previous maintenance levelI apply
that to the clone target?
thanks
Bill
On Wed, 13 Mar 2019 16:17:55 +, Longnecker, Dennis wrote:
>I've seen the information on how to get z/os data available via SMB to a
>Windows machine, but haven't seen anything on how to get the z/os side to send
>a file to a windows SMB.
>
>Trying to get a bunch of mainframe files over to a
Always have a CSI for any instance of a package serviced by SMP. Depending on
your methodology you may have several large CSIs or many smaller ones, but you
dhould have a taqrget and dlib zone for each instance.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
I've seen the information on how to get z/os data available via SMB to a
Windows machine, but haven't seen anything on how to get the z/os side to send
a file to a windows SMB.
Trying to get a bunch of mainframe files over to a Windows share, without
setting up FTP servers on the windows side
That's dangerous, but it's not my dog.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List on behalf of
Vernooij, Kees (ITOP NM) - KLM
Sent: Wednesday, March 13, 2019 11:35 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Because no one ever asked for it? In the scenario I described, using
IEANT* would work no matter where the control block was allocated.
If you have another use-case, you can submit an RFE.
In article <7ef29fbf-086a-4108-bfd4-bda2903ac...@gmail.com> you wrote:
> Wonder why this functionality is
No, it means that the page table does not point to a valid page frame for that
address. In no case is the page frame in core, since nothing in the z line uses
core. It does not guarantee that the associated storage frame is not in RAM,
since it may have been stolen but not yet used.
--
Shmuel
PIC = Program Interrupt Code.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List on behalf of
Elardus Engelbrecht
Sent: Wednesday, March 13, 2019 2:32 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IARST64 in
You apply the PTF to whichever target zone(s) you need it on. You might apply
it to one, test it and then apply it to another, or you might only need it one
the first target zone you update.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
What happens when you are testing a new service level and you need to install
PTF on the production system? If you apply it to the test system and copy, then
you be running the new service level before you've finished testing it.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
Nothing ever goes to prod unless its not thru the migration process, if a PTF
is needed for prod and our sandbox is not fully tested (which has not happened)
it gets applied to the test lpar's sysres. I understand the scenario you're
talking about, I've just never had the need to apply a PTF on
You should be good then! V2.4 should be supported for 4 years from fall of
2019 if I am not mistaken
_
Dave Jousma
Mainframe Engineering, Assistant Vice President
david.jou...@53.com
1830 East Paris, Grand Rapids, MI 49546 MD
Classification: Public
Yes, I spotted this too. I've been too busy to spare time to think about it,
but I too use it for seamless file transfer to/from my laptop, and would miss
that functionality. I suspect IBM would be pushing other, more cumbersome
technologies like IDz.
I was also
Absolutely. And did SETR Refreshes when needed.
Lizette
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of
> Carmen Vitullo
> Sent: Wednesday, March 13, 2019 11:43 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: How to grant access to CONSPROF
>
> ok, a stupid
I've had similar issues with console, not RACF here but TSS, sometimes I'm told
I need to logoff and logon again even though the in storage profiles have been
refreshed.
Carmen Vitullo
- Original Message -
From: "Lizette Koehler"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Wednesday,
You said that... seamless ftp. Not only that. If two or more users are
using wsa, they can switch sessions or even steal a session. The user just
have to reply to a message that pops on his terminal, exactly as he click
on spam emails...
No wonder that ibm is going to drop it.
ITschak
בתאריך
On Wed, 13 Mar 2019 13:09:03 -0500, Bill Giannelli wrote:
>Please excuse the rookie questions, but that means one global, clone the
>target and dlib before apply.
>then lets say I need a one-off ptf to the previous maintenance levelI
>apply that to the clone target?
>thanks
Yes, one global
No excuse for this one. STCKF is, if you will, a subset of STCK.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Farley, Peter x23353
Sent: Wednesday, March 13, 2019 1:21 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: STCKE
ok, a stupid question, you issued the PARMLIB UPDATE(00) command ?
Carmen Vitullo
- Original Message -
From: "Lizette Koehler"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Wednesday, March 13, 2019 1:39:30 PM
Subject: How to grant access to CONSPROF
Dear List -
I am trying to run a
"Withdrawal of ISPF Workstation Agent (WSA)
z/OS V2.4 is planned to be the last release to support the ISPF Workstation
Agent (WSA), also known as the ISPF Client/Server Component. WSA is an
application that runs on your local workstation and maintains a connection
between the workstation and the
This is not a TSO User. But an ID Used on a batch job in JCL coded on the
jobcard as USER=USER01
So nothing to logoff or logon. So unless you are indicating an IPL Is required
;-D, not sure how to refresh the ID as it never logged on
Lizette
> -Original Message-
> From: IBM
Hi all,
I am fairly new to hsm (been around MVS for decades though). The person that
previously managed hsm left the company and now I have that responsibility.
I have a couple of basic questions about hsm...
1. Can I manually delete old ACTIVITY Logs outside of hsm? (in other words,
Otherwise known as the deficiencies of software emulation vs silicon. :)
Peter
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Phil Smith III
Sent: Wednesday, March 13, 2019 4:11 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: STCKE
It really depends, I've never been stuck in a situation when I needed to do
this, if so;
I'll apply to SMP target, copy to TEST SYSRES, TEST, and move to PROD copied to
the alternate SYSRES. my small 3 LPAR PLEX shares the SYSRES, so migration is
copy to SYSRES(A), IPL test from that SYSRES,
INADDR was added to STORAGE OBTAIN in SP4.3.0 to support
FORKing in POSIX. POSIX did VSMLIST in the source space to
find out how storage is allocated, and then STORAGE OBTAINs
with INADDR in the target space to create the same storage
allocations in the target. At the time of the original
Thanks for the explanation
> On Mar 13, 2019, at 3:16 PM, Jim Mulder wrote:
>
> INADDR was added to STORAGE OBTAIN in SP4.3.0 to support
> FORKing in POSIX. POSIX did VSMLIST in the source space to
> find out how storage is allocated, and then STORAGE OBTAINs
> with INADDR in the target
Probably doesn't matter here, but note that on the zPDT, STCKF is actually
about exactly an order of magnitude SLOWER at some rev levels. I found this,
reported it, it's presumably fixed (but not on the zPDT I have access to, which
I don't own).
Doing 100,000,000 iterations of each:
stck
1. Yes, you can manually delete them.
I setup a SMS Management class for them to migrate them directly to ML2 after 2
days, Did a Activity Swap log daily. and Delete for non/use after 35 days of
non use, (I think the backup were kept for 60 to 90 days after deletion).
2. Not sure about the
Little need for dual path now, unless you are writing for a very specialized
market. All current releases of z/OS demand a machine of at least a recent
enough vintage as to support STCKF.
Charles
-Original Message-
From: IBM Mainframe Discussion List
Dear List -
I am trying to run a batch REXX that issues CONSPROF or CONSOLE commands.
I have set up everything in IKJTSO00 for CONSOLE, I have updated the RACF
TSOAUTH for the ID issuing the commands
The process will VARY OFFLINE and VARY ONLINE Dasd volumes
Yet I am still getting
IKJ55353I
I typically apply maintenance to my base target zone which has an associated
DLIB zone which is never IPLed from. I have 3 SYSRES volumes per environment
(TECH, DEV, PROD-A, PROD-B) for a total of 12 SYSRES volumes. I have a
cloning process that besides building the entire sysres, also does
got ya, our CA-OPS uses console services, I've never looked but I wonder if the
ID need to have a TSO SEGMENT to use console services ?
Carmen Vitullo
- Original Message -
From: "Lizette Koehler"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Wednesday, March 13, 2019 2:56:55 PM
Subject:
I did a little looking at our batch user IDs and the few we have listed to
support the CONSOLE function under TSO/REXX in batch do have a TSO segment
defined. Not sure if that was really needed but it is there.
Thanks..
Paul Feller
AGT Mainframe Technical Support
-Original Message-
Several TN3270E emulators offer file transfer windows. Doesn't Rocket
Software offer something similar?
On Wed, Mar 13, 2019 at 2:09 PM Don Leahy wrote:
>
> "Withdrawal of ISPF Workstation Agent (WSA)
>
> z/OS V2.4 is planned to be the last release to support the ISPF Workstation
> Agent (WSA),
On Wed, 13 Mar 2019 13:34:03 -0700, Charles Mills wrote:
>No excuse for this one. STCKF is, if you will, a subset of STCK.
>
Conway's Law explains, though not excuses, many such misbehaviors.
>-Original Message-
>From: Farley, Peter x23353
>Sent: Wednesday, March 13, 2019 1:21 PM
>
Is the user ID the job is run under authorized to use BLP?
Do you not have a tape management system that could report this without even
mounting the tape?
> -Original Message-
> From: IBM Mainframe Discussion List On
> Behalf Of Hilario Garcia
> Sent: Wednesday, March 13, 2019 5:45 AM
On 2019-03-13 16:39, Charles Mills wrote:
Little need for dual path now, unless you are writing for a very specialized
market. All current releases of z/OS demand a machine of at least a recent
enough vintage as to support STCKF.
Agreed. I did mention that I was going back in time. The point
Even more relevant, check out http://bit.ly/2Sk5rwY, winner of Best Session at
SHARE Winter 2017. I was there, sitting next to a suit (rare at SHARE) who
about every five minutes muttered under his breath "Oh, Jesus."
Saying "this can't happen if your RACF is properly configured" is like saying
75 matches
Mail list logo
