randy.a.scha...@intel.com
-Original Message-
From: S. H. Lee [mailto:smil...@korea.ac.kr]
Sent: Wednesday, September 21, 2011 7:22 PM
To: Schafer, Randy A
Cc: 'ipmitool-devel'; 'Zdenek Styblik'
Subject: RE: [Ipmitool-devel] measuring the power consumption of a server
When I updated the SDR, I
-Original Message-
From: S. H. Lee [mailto:smil...@korea.ac.kr]
Sent: Wednesday, September 21, 2011 7:22 PM
To: Schafer, Randy A
Cc: 'ipmitool-devel'; 'Zdenek Styblik'
Subject: RE: [Ipmitool-devel] measuring the power consumption of a server
When I updated the SDR, I chose Intel
Engineering
Korea University
-Original Message-
From: Schafer, Randy A [mailto:randy.a.scha...@intel.com]
Sent: Friday, September 23, 2011 2:46 AM
To: S. H. Lee
Cc: 'ipmitool-devel'; 'Zdenek Styblik'
Subject: RE: [Ipmitool-devel] measuring the power consumption of a server
:58 PM
To: 'Schafer, Randy A'
Cc: 'ipmitool-devel'
Subject: Re: [Ipmitool-devel] measuring the power consumption of a
server
Then, I will try to find the cause that the firmware cannot communicate
with
a power supply.
If I find the reason, I will report it and a possible solution (if I can
address
On Tue, Sep 20, 2011 at 10:18 PM, S. H. Lee smil...@korea.ac.kr wrote:
Hi,
I have a SV7-2186 server with a S5500WBV motherboard and a Xeon processor.
Its power supply is TDPS-600EB from DELTA.
I am planning to develop a software checking the power consumption of a
server.
According to
, September 21, 2011 6:00 PM
To: S. H. Lee
Cc: ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
On Tue, Sep 20, 2011 at 10:18 PM, S. H. Lee smil...@korea.ac.kr wrote:
Hi,
I have a SV7-2186 server with a S5500WBV motherboard and a Xeon
: ipmitool-devel
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
On Wed, Sep 21, 2011 at 2:56 PM, S. H. Lee smil...@korea.ac.kr wrote:
Thanks for your comments,
In the last mail, I said that I have a SV7-2186. It isn't the model I
have.
My server is Intel
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
On Wed, Sep 21, 2011 at 2:56 PM, S. H. Lee smil...@korea.ac.kr wrote:
Thanks for your comments,
In the last mail, I said that I have a SV7-2186. It isn't the model I
have.
My server is Intel SR1690WBR
To: S. H. Lee; ipmitool-devel@lists.sourceforge.net
Cc: Zdenek Styblik
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
It may recognize the power supply but it does not mean there is an
electrical bridge between the IPMB bus and PSMI bus.
Check with your vendor
, 2011 6:04 PM
To: S. H. Lee; 'Hank Bruning'
Cc: ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
I would verify that PSU. I don't see a TDPS-600EB listed on Delta's
website
and the closest thing to it is the TDPS-600CB which does not look
Corporation
randy.a.scha...@intel.com
-Original Message-
From: S. H. Lee [mailto:smil...@korea.ac.kr]
Sent: Wednesday, September 21, 2011 5:22 PM
To: 'Zdenek Styblik'
Cc: 'ipmitool-devel'
Subject: Re: [Ipmitool-devel] measuring the power consumption of a server
Hi,
I've attempted some
on a front panel.
Sincerely,
-Original Message-
From: Hall, Eric R [mailto:eric.r.h...@intel.com]
Sent: Thursday, September 22, 2011 10:21 AM
To: S. H. Lee; 'Hank Bruning'
Cc: ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] measuring the power consumption of a server
To: S. H. Lee; 'Zdenek Styblik'
Cc: 'ipmitool-devel'
Subject: RE: [Ipmitool-devel] measuring the power consumption of a server
When you updated the SDR, which chassis did you specify?
Did the SDR utility display a message about PS1 and PS2 being present or
not?
These servers do not support
13 matches
Mail list logo