Thanks Christophe,
I was wondering if that would work.
I did something similar, a big pad 11 that has the hole in the middle and 4
small-overlapping pads 12-15 with the holes in the corners.
My worry (if I give them the same number) was... how will I choose between them
when I right-click and
Hi There,
I tried to make the subject descriptive, but here it is:
If I have a design with 10 identical channels, can I lay one channel out and
then copy and paste-it and somehoy get pcbnew to use the references of the next
channel?
Thanks,
Cat
of layout and have
pcbnew change the references automatically in a multi-channel design?
Do you want create a panel of pcbs?
C.A.P.
Em 6/4/2010 16:49, Cat C escreveu:
Hi There,
I tried to make the subject descriptive, but here it is:
If I
sections with unique ref
des numbers BUT you may need to go back to the schematic if the
algorithm used to assign successive ref des idents doesn't match the
netlist.
--- In
kicad-users@yahoogroups.com, Cat C catalin_c...@... wrote:
Hi There,
I tried to make
the subject
I don't know if I'm the only one, but quite often some tracks will loose their
net name so I can't attach them to the desired pad.
How can I restore, or set (if there never was) the net of a track, please?
Thanks,
Cat
18:11, Cat C wrote:
I don't know if I'm the only one, but quite often some tracks will
loose their net name so I can't attach them to the desired pad.
How can I restore, or set (if there never was) the net of a track,
please?
Thanks,
Hi Mirko,
I don't know how (why even) to create a layout without a schematic so my
workaround may not work if you do it that way.
If you had a schematic, nets would have names and you would connect the zone
(in properties) to the GND net (or whatever you called it), same as the pin of
the
Just print on 2 separate pages, align them and staple/clip them on one side,
then slip your board in.
Cat
To: kicad-users@yahoogroups.com
From: susanmac...@optusnet.com.au
Date: Sun, 2 May 2010 05:40:54 +
Subject: [kicad-users] Merging outputs for double-sided boards
I have
What kind of errors, if a PCB house can make the PCBs?
Cat
To: kicad-users@yahoogroups.com
From: d...@andersson.co.uk
Date: Wed, 5 May 2010 14:35:21 +0100
Subject: [kicad-users] Re: Gerber files
The gerber files from KiCad might contain inconsistencies or gerber errors so
do
You might want to have connectors for wires/cables between those boards.
So if the schematics show connectors instead of connections you might get what
you want.
Even if you won't populate connectors, you can still put some headers where
you'll solder the wires.
Cat
To:
Shouldn't there be more vias to take the heat to the bottom?
T
To: kicad-users@yahoogroups.com
From: birmingham_spi...@gmx.net
Date: Mon, 17 May 2010 09:57:50 +0100
Subject: Re: [kicad-users] Preventing thermals on special pads of SM packages
I often have to work with MLF/QFN
There's a guy in Montreal that can cut the soldermask for you out of mylar at a
very reasonable cost.
It will take me a while to find his details so I'll only do it if there's
interest.
Cat
To: kicad-users@yahoogroups.com
From: anders.gustafs...@pedago.fi
Date: Tue, 15 Jun 2010
use to stop solder from going where it should not.
- Anders Gustafsson
Engineer, CNE6, ASE
Pedago, The Aaland Islands (N60 E20)
www.pedago.fi
phone +358 18 12060
mobile +358 40506 7099
fax +358 18 14060
Cat C catalin_c...@hotmail.com 2010-06-15 20:30
There's a guy in Montreal
Nothing is perfect!
Only Nadia was in Montreal! :-D
ground plane parameters for a recent, perfect board of mine. I hope
...
Hi,
Using build 20100314 SVN-R2460 on XP, when I try to print (either from menu or
button) it just freezes, like a print dialog would get all input but there is
no print dialog.
I use 2 monitors and multimon if it makes any difference.
Help?
Thanks,
Cat
I think you need to turn DRC (Design Rules Checking) off, but I'm a beginner
too, so I'm not sure.
Good luck,
Cat
To: kicad-users@yahoogroups.com
From: mad...@free.fr
...
I create a new project, open PCB new, place say a DIP-8_300 component, click on
'add traces and vias', start
Did you turn DRC off?
That's the purpose of DRC, to NOT LET YOU do things that are not in the netlist
(among other things).
If you don't want to make a schematic, make a netlist.
Cat
To: kicad-users@yahoogroups.com
From: mad...@free.fr
Date: Fri, 20 Aug 2010 23:40:39 +
Subject:
17 matches
Mail list logo