under
that foil.
Pat
- Original Message -
From: "Larry Howell" <lah...@yahoo.com>
To: "krnet" <kr...@mylist.net>
Sent: Thursday, March 24, 2011 11:55 PM
Subject: Fwd: KR> Peel Ply / Slurry
> This never made it to the list
> Larry H
>
>
This never made it to the list
Larry H
Sent from my iPad
Begin forwarded message:
> From: "Larry H." <lah...@yahoo.com>
> Date: March 24, 2011 12:09:50 AM CDT
> To: KRnet <kr...@mylist.net>
> Subject: Re: KR> Peel Ply / Slurry
>
> Pat Russo wro
Pat Russo wrote
I generally use Styrofoam, (blueboard),
applying a wet resin layer, then a slurry layer followed by fabric and
stippling ending with a squeegeeing of excess resin
The whole idea of using slurry is to make the piece you are building weigh
less.
The glass balls
ke in 6mths.
But our hearts go out to those in Japan.
Chch
N.Z.
- Original Message -
From: "Patrick and Robin Russo" <patru...@myfairpoint.net>
To: "KRnet" <kr...@mylist.net>
Sent: Friday, March 18, 2011 8:42 AM
Subject: KR> Peel Ply
for your
input,
Pat
- Original Message -
From: "Mark Langford" <m...@n56ml.com>
To: "KRnet" <kr...@mylist.net>
Sent: Thursday, March 17, 2011 8:28 PM
Subject: Re: KR> Peel Ply
> It depends on why you're using peelply. If you want a pin-hole free
&g
Pat Russo wrote:
>> I am about to glass in my tail feathers. I have done several projects
before but this is the first using Peel Ply. My question is; Do I squeegee
off the excess resin thru the ply? I generally use Styrofoam, (blueboard),
applying a wet resin layer, then a slurry layer followed
Gentlemen, Ladies
I am about to glass in my tail feathers. I have done several projects
before but this is the first using Peel Ply. My question is; Do I squeegee
off the excess resin thru the ply? I generally use Styrofoam, (blueboard),
applying a wet resin layer, then a slurry layer
At 05:43 PM 9/5/2009, you wrote:
>Larry is right on the Deck Cloth. I agree on
>everything except on using it on the wood as I think this is unnecessary
>work for very little if any benefit. "MY OPINION".
>Daniel R. Heath
+++
I used it on the
..@mylist.net>
Sent: Saturday, September 05, 2009 4:43 PM
Subject: RE: KR> Peel ply
Using Peel Ply is never "Required". It is good when you will need to add
another layer, or just to bring the resin up to the top to eliminate a lot
of the sanding and pin holes. Larry is right on
eath - Lexington, SC
-Original Message-----
Subject: KR> Peel ply
If using deck cloth, is peel ply necessary
At 03:54 PM 9/5/2009, you wrote:
>If using deck cloth, is peel ply necessary, as far as using in areas
>where another layup will probably not be laid?
>Roger Baalman
I'm assuming your use of the term "deck
If using deck cloth, is peel ply necessary, as far as using in areas where
another layup will probably not be laid? I understand the benefit of using
peel ply where another part will be glued on, but out on the open areas of the
wing for example, I plan on using deck cloth over theCF.
Thanks
Others have covered it pretty good, but using the Google box on my website
at www.n56ml.com turns up four places where I show and discuss the use of
peel ply. For example http://home.hiwaay.net/~langford/nacaducts/ , where I
recommend you peel it off after about 12 hours (that depends on the
>
> Does it come up easy or is there something I can buy to make it come off
> easy?
>
It comes off easily enough by picking up an overhanging edge and peeling it
back in the opposite direction much like taking off a band-aid. You may
need to use a little muscle with large pieces such as wing
Does it come up easy or is there something I can buy to make it come off
easy?
David
In a message dated 8/10/2009 7:11:45 P.M. US Mountain Standard Time,
bdazzca...@aol.com writes:
I was wondering. Do you take off the peel ply after it dries or do you
leave it on?
David
Thanks guys.
David
In a message dated 8/10/2009 7:15:21 P.M. US Mountain Standard Time,
kr.2s.dar...@gmail.com writes:
David.
You take the peel ply off after it dries. Always.
Cheers
--
Darren Crompton
AUSTRALIA
My web site: www.kr-2s.com
___
David.
You take the peel ply off after it dries. Always.
Cheers
--
Darren Crompton
AUSTRALIA
My web site: www.kr-2s.com
Be sure to take it off before putting on your next layer. It is used to
absorb extra resin and make a surface ready to ad layers to. Be absolutely
sure it is removed or you will have an unsafe part.
Kevin Golden
Harrisonville, MO
In a message dated 8/10/2009 9:11:44 P.M. Central Daylight
I was wondering. Do you take off the peel ply after it dries or do you
leave it on?
David
jscott.pi...@juno.com wrote:
>
>On Tue, 16 Jan 2007 17:09:54 -0600 Larry Flesner
> writes:
>
>
>>At 03:39 PM 1/16/2007, you wrote:
>>
>>
>>>But I thought peel ply left a skin of silicone on the epoxy I
>>>thought you had to remove that before you laid another
On Tue, 16 Jan 2007 17:09:54 -0600 Larry Flesner
writes:
> At 03:39 PM 1/16/2007, you wrote:
> >But I thought peel ply left a skin of silicone on the epoxy I
> >thought you had to remove that before you laid another layer on??
> >Fred Johnson
>
Someone posted some time ago that a good substitute for peel ply that was
inexpensive was common sheer material used along with curtains. It would be
commonly available at Walmart, Kmart and such.
If weight saving is not the issue, just a smooth finish with least amount of
work, I have had
Hi,
Can someone expail what peel ply is too? Sorry
David Swanson
bdazzca...@aol.com
- Then click on the pics
See you in Mt. Vernon - 2006 - KR Gathering
There is a time for building and a time for FLYING and the time for building
is OVER.
Daniel R. Heath - Lexington, SC
---Original Message---
From: bdazzca...@aol.com
List-Post: krnet@list.krnet.org
Date: 04/10/06 20:24:5
...@wi.rr.com
Visit my NEW
KR-2S CorvAIRCRAFT web site at www.flykr2s.com
- Original Message -
From: <bdazzca...@aol.com>
To: <kr...@mylist.net>
Sent: Monday, April 10, 2006 7:24 PM
Subject: KR> peel ply
> Hi,
>
>Can someone expail what peel ply is too?
- Original Message -
From: "Dan Heath" <da...@alltel.net>
To: <kr...@mylist.net>
Sent: Monday, April 10, 2006 7:31 PM
Subject: Re: KR> peel ply
> It is a "ply" of a Dacron sort of material, that you put on to "peel" off.
> It leaves a smooth su
I was under the impression that another use for peel ply was if you were
going to add more layers too your glass at a later date or join two parts. I
am I wrong in this matter?
Eric Pitts
Terre Haute IN
KR2S
http://home.att.net/~e.j.pitts/
> It is a "ply" of a Dacron sort of material, that you put on to "peel" off.
It leaves a smooth surface that requires little to no sanding. It works
very well, but is difficult to apply to compound curves. You peel it off as
soon as the resin cures.
>You can also use something called "deck"
You are correct, but that is not the only use, and if you don't use it, you can
sand and then add the next layer.
From: Pitts Eric MSgt 181FW/MXOO <eric.pi...@interr.ang.af.mil>
List-Post: krnet@list.krnet.org
Date: 2006/04/11 Tue AM 07:32:22 CDT
To: kr...@mylist.net
Subject: KR> pe
At 07:32 AM 4/11/2006, you wrote:
>I was under the impression that another use for peel ply was if you were
>going to add more layers too your glass at a later date or join two parts. I
>am I wrong in this matter?
>Eric Pitts
+++=
Peel ply
Another Question
Does peel ply work just as well over a already dry lay up, If I wanted to
add a glass lay up over an inner wing to help remove the pin holes, because
I did not have peel ply when I first glassed the inner wing???
Hope that makes sense?
Phil Matheson
mathes...@dodo.com.au
To: "KRnet" <kr...@mylist.net>
Subject: Re: KR> peel ply
Another Question
Does peel ply work just as well over a already dry lay up, If I wanted to
add a glass lay up over an inner wing to help remove the pin holes, because
I did not have peel ply when I first glassed the inner wing???
>
>Does peel ply work just as well over a already dry lay up, If I wanted to
>add a glass lay up over an inner wing to help remove the pin holes, because
>I did not have peel ply when I first glassed the inner wing???
>Phil Matheson
++
-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Jeff Scott
Sent: Tuesday, August 23, 2005 11:47 AM
To: kr...@mylist.net
Subject: KR> Peel Ply
Almost any fine weave synthetic cloth will work just as well as peel
ply. I've been using 6" dacron tape and left over ceconite 1
An embedded and charset-unspecified text was scrubbed...
Name: not available
Url:
http://mylist.net/private/krnet/attachments/20050823/27aa4aba/attachment.bat
35 matches
Mail list logo