Joey
for your reference, this is how the wondershaper installs the root qdisc
# install root HTB, point default traffic to 1:20:
tc qdisc add dev $DEV root handle 1: htb default 20
HTH
Erich
At 22:30 16.12.2003 -0600, Joey Officer wrote:
...
firewall: -root-
# tc qdisc add dev eth0 root handle
of something fowled up in the distro
that I got.
joey
-Original Message-
From: S Mohan [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 17, 2003 12:28 AM
To: 'Joey Officer'
Subject: RE: [leaf-user] QOS setup under Bering 1.2
You would get this error if tc does not support htb. I know
PROTECTED]
Sent: Wednesday, December 17, 2003 1:32 AM
To: Joey Officer; [EMAIL PROTECTED]
Subject: RE: [leaf-user] QOS setup under Bering 1.2
Joey
for your reference, this is how the wondershaper installs the root qdisc
# install root HTB, point default traffic to 1:20:
tc qdisc add dev $DEV root
am willing to continue to
test this, if others are willing to work with me.
Joey
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Joey Officer
Sent: Monday, December 15, 2003 9:31 PM
To: Leaf User List
Subject: RE: [leaf-user] QOS setup under Bering 1.2
Joey
I am using tc only (not qos-htb) with the wondershaper as documented on the
shorewall site.
To start with, it failed too with IIRC similar problems. I finally had to
dig into the wondershaper code and found ash arithmetic problems settting
up the tc commands.
So I believe it is not tc
:[EMAIL PROTECTED]
Sent: Tuesday, December 16, 2003 1:46 AM
To: Joey Officer; Leaf User List
Subject: RE: [leaf-user] QOS setup under Bering 1.2
Joey
I am using tc only (not qos-htb) with the wondershaper as documented on the
shorewall site.
To start with, it failed too with IIRC similar problems
: [leaf-user] QOS setup under Bering 1.2
Been doing some reading, and I found a couple of interesting bits.
What appears to be a somewhat current HTB home page, with a fair amount
of
documentation:
http://luxik.cdi.cz/~devik/qos/htb/htbfaq.htm
Additionally, from the FAQ:
RTNETLINK answers: Invalid
]
[mailto:[EMAIL PROTECTED] Behalf Of Mariano
Drzazga
Sent: Tuesday, December 16, 2003 1:06 PM
To: [EMAIL PROTECTED]
Subject: RE: [leaf-user] QOS setup under Bering 1.2
Joey :
I'm using HTB with Bering 2.0 without problems.
I don't use wondershaper neither htb.init scripts since I use my own
made scripts
-Original Message-
From: S Mohan [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 15, 2003 3:37 AM
To: 'Joey Officer'
Subject: RE: [leaf-user] QOS setup under Bering 1.2
I think the package is broken. Can Juan/Jacques let us know which the
right package is? Apart from
I've read over the docs for the Bering user guide, and have been stuck at a
single spot:
firewall: -root-
# tc qdisc add dev eth0 root
RTNETLINK answers: Invalid argument
I have noticed that when I go into LRCFG, that the qos-htb package is not
listed. Is there anyway to confirm that the
for port
ranges (like the 1 - 2)?
- Original Message -
From: Mike Schurman [EMAIL PROTECTED]
To: Joey Officer [EMAIL PROTECTED]
Sent: Thursday, November 13, 2003 9:46 PM
Subject: Re: [leaf-user] QOS setup under Bering 1.2
Joey,
You might try this qos-htb.lrp
I got it from
11 matches
Mail list logo
