: woensdag 25 juni 2003 17:22
To: '[EMAIL PROTECTED]'
Subject: [leaf-user] Re: Trouble getting started
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link
?
Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Stefaan Van
Dooren
Sent: Thursday, June 26, 2003 3:22 AM
To: [EMAIL PROTECTED]
Subject: RE: [leaf-user] Re: Trouble getting started
If I remember correctly, if you have more then one 3C509
PROTECTED]
Sent: Wednesday, June 25, 2003 12:18 PM
To: Somerlot, Chris; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Re: Trouble getting started
I don't remember what dist you're running, but I assume it's
a recent one
with Shorewall?
Have you declared both interfaces?
If you run lsmod
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right. My ioports shows this for the cards:
0300-030f : 3c509
My interrupts shows:
CPU0
0: 128443 XT-PIC timer
1:881 XT-PIC keyboard
2:
2003 05:47:06 -0700
From: Somerlot, Chris [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]' [EMAIL PROTECTED]
Subject: [leaf-user] Re: Trouble getting started
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right. My ioports shows this for the cards
: Thu, 26 Jun 2003 05:47:06 -0700
From: Somerlot, Chris [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]'
[EMAIL PROTECTED]
Subject: [leaf-user] Re: Trouble getting started
I've tried 2 different sets of ISA 3C509 cards, get the
same problems.
I'm not sure the cards are setup right. My
At 05:13 PM 6/26/2003 +0200, Patrick Benson wrote:
Somerlot, Chris wrote:
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right.
DId you try my suggestion of testing the cards one at a time, always in the
same isa slot? Assuming eth0
On Thursday 26 June 2003 07:10 am, Somerlot, Chris wrote:
Actually what I get is:
Module PagesUsed by
ip_nat_irc 2176 0 (unused)
ip_nat_ftp 2784 0 (unused)
ip_conntrack_irc2880 1
ip_conntrack_ftp3648 1
3c509
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host
At 08:21 AM 6/25/2003 -0700, Somerlot, Chris wrote:
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
(unused)
ip_conntrack_ftp2848 0 (unused)
3c509 6564 2
Do you?
Thanks
Tony
- Original Message -
From: Somerlot, Chris [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 11:21 AM
Subject: [leaf-user] Re: Trouble getting started
Still
Chris
Somerlot, Chris wrote the following at 17:21 25.06.2003:
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd
12 matches
Mail list logo