Re: [leaf-user] dhcp_2_dns

Thanks for the reply. Yes, I would agree that it looks like ash (is that the shell bering uses?) can't handle those large numbers. But what should be done about it? I'm not sure what shell the programmer intended this script be run on. As for getting the script to be run when the dhcp lease

[leaf-user] Using hostnames instead of ip addresses in shorewall config?

Is it safe to use hostnames instead of IP addresses in the shorewall configuration files? Would this even work? It would be nice to have entries like: DNATnetloc:web_serverwww80 instead of: DNATnetloc:10.0.1.10www80 especially when DHCP is being

[leaf-user] cron in bering?

I have a question about the cron setup in bering. /etc/crontab seems to be in charge of running the daily, weekly, and monthly cron tasks. /etc/cron.d/multicron seems to handle the periodic (every 15 minutes) cron tasks Why aren't they all done the same way? There must be a good reason, but I

RE: [leaf-user] LRP Bering / change nic mac address

Ok, we can add the intel pro 100 to that list. It is an half height PCI card and the chip is the i82559. -Original Message- From: Ray Olszewski [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 12, 2002 6:38 PM To: [EMAIL PROTECTED] Subject: RE: [leaf-user] LRP Bering / change nic

RE: [leaf-user] Using hostnames instead of ip addresses in shorewall config?

Do you hav a web server that is getting IP from DHCP? Nice... Well, if you add entries to /etc/hosts, you can use names -Original Message- From: Mark Ivey [mailto:[EMAIL PROTECTED]] Sent: Friday, September 13, 2002 8:30 AM To: [EMAIL PROTECTED] Subject: [leaf-user] Using hostnames

RE: [leaf-user] Testing Linux Bering Project

Hey. This is the same thing I've been at. Look at dachenstein or www.monkeynoodle.com (Jack Coates) for the package repositories that work with bering rc3. snmp, squid - both available. You can install on a flash ram or cf and put them inside the box. You may want to look at the leaf-hardware

RE: [leaf-user] startup scripts

Simple add your script or commands in bootmisc.sh in /etc/init.d. This is executed last on boot up. Mohan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of JeeBak Kim Sent: Thursday, September 12, 2002 5:46 PM To: Lennard de Hoog Cc: [EMAIL PROTECTED]

[leaf-user] can't use comand lpr if run p9100 daemon

Dear sir My boot disk has lpd.lrp and p9100.lrp. I can't print job with command lpr, it show printer off line. Until kill process p9100 it work. I need to use together 2 daemon Hope to hearing from you. --- This sf.net email is

Re: [leaf-user] Using hostnames instead of ip addresses in shorewall config?

Well, it actually isn't a web server, it is a voice comms server (teamspeak 2) and ssh/sftp. It is getting an address from the DHCP server on my Bering box. The names are going to come from the DNS server running on the Bering box (tinydns, getting its data from the dhcp server by way of

Re: [leaf-user] Using hostnames instead of ip addresses in shorewall config?

Well, it actually isn't a web server, it is a voice comms server (teamspeak 2) and ssh/sftp. It is getting an address from the DHCP server on my Bering box. The names are going to come from the DNS server running on the Bering box (tinydns, getting its data from the dhcp server by way of