These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
working on a driver for the same family of silicon but don't assume
anything.
I've updated the wiki a little with information I could get off the images I
could find off the Hauppauge website. It looks it is based on
These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
working on a driver for the same family of silicon but don't assume
anything.
I've updated the wiki a little with information I could get off the images I
could find off the Hauppauge website. It looks it is based on
This this OT, but I don't really know where to ask. And after all, the
odds are that I will find a person with that sort of knowledge here.
Perhaps a satellite TV forum, if you don't get any good replies here.
Option A - This is the easiest for me to achieve, but the position of
the power
http://www.youplala.net/~will/htpc/Satellite/masthead_amp-where.png
Option A is not possible, because the LNB is powered by the tuner too.
You can't have two power supplies in parallel on the same wire.
(The only solution would be to draw the power for the amp from the LNB
supply too, so you
years ago i had a sat installed
because of the wall they used a combiner/decoder with power pass
like these
http://www.hillsantenna.com.au/cattleprod/products/D3101DIP
so the power goes via the cable but not onto the fta side
put your amp power supply up in the roof after teh combiner
-
Thanks all for the comments, here or in private.
Option B it will be.
I have to bite the bullet and manage to get a power point where I need
it now...
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
well it looks like i could be stuffed
just found the new windows driver and they call it a dual 5
heres a snip of the driver.inf
%AvsBluebird.DVBT_Dual.DeviceDesc% =Bluebird2.DVBT_NANO2,
USB\VID_0FE9PID_DB78 ; DUAL4 (XC3028+Zarlink)
%AvsBluebird.DVBT_Hawk1.DeviceDesc%
I also know of this repository
http://linuxtv.org/hg/~stoth/cx23885-video. However, it hasn't changed
in a month either. What is the state of the driver? will it be
considered for integration in to 2.6.25? or 2.6.26? has it been
dropped all together?
Dropped? No, I just hasn't changed in a
I spent several hours again to see if I could get it working on Debian
sid. I got a little bit further bit still got compilation errors.
Can you please look at my attachments.
CC [M] /home/jelle/em28xx-userspace2/em2880-dvb.o
In file included from
Hello all,
I wanted to create the channel config files for my environment, but
there is no scan example configuration that works for my environment, I
do have the websites with tabels of the frequencys. How do i create my
channel.conf
sudo apt-get install dvb-utils
# dvb-c channels:
Craig Whitmore wrote:
These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
working on a driver for the same family of silicon but don't assume
anything.
I've updated the wiki a little with information I could get off the
images I could find off the Hauppauge website.
Markus Rechberger wrote:
On 2/29/08, Nicolas Will [EMAIL PROTECTED] wrote:
hmmm...
guys.
First thing: on a Debian or Ubuntu system, I never needed the full Linux
sources to compile a v4l-dvb tree. The headers were always enough.
Second thing: when you compile a v4l-dvb tree on the side, I do
On Fri, Feb 29, 2008 at 4:03 PM, Markus Rechberger
[EMAIL PROTECTED] wrote:
Hi Jelle,
On Fri, Feb 29, 2008 at 3:52 PM, Jelle de Jong
[EMAIL PROTECTED] wrote:
Hello all,
I wanted to create the channel config files for my environment, but
there is no scan example configuration
Jelle de Jong wrote:
Hello all,
I wanted to create the channel config files for my environment, but
there is no scan example configuration that works for my environment, I
do have the websites with tabels of the frequencys. How do i create my
channel.conf
Take a look at this
Hi Jelle,
On Fri, Feb 29, 2008 at 3:52 PM, Jelle de Jong
[EMAIL PROTECTED] wrote:
Hello all,
I wanted to create the channel config files for my environment, but
there is no scan example configuration that works for my environment, I
do have the websites with tabels of the frequencys. How
Markus Rechberger wrote:
I spent several hours again to see if I could get it working on Debian
sid. I got a little bit further bit still got compilation errors.
Can you please look at my attachments.
CC [M] /home/jelle/em28xx-userspace2/em2880-dvb.o
In file included from
On Fri, Feb 29, 2008 at 4:10 PM, Jelle de Jong
[EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
I spent several hours again to see if I could get it working on Debian
sid. I got a little bit further bit still got compilation errors.
Can you please look at my attachments.
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
#!/bin/bash
# Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.1j.txt
#
# Copyright 2008 Jelle de Jong [EMAIL PROTECTED]
#
# This program is
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the correct
Hi Jelle,
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the correct mailinglist for those devices is em28xx at mcentral dot de
I added some comments below and
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the correct mailinglist for those devices is em28xx at mcentral dot de
I added
Markus Rechberger wrote:
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter, LNBP21_PCL,
LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with
On Nov 13, 2007 11:16 AM, aldebaran aldebx at yahoo.fr wrote:
I thank you very much for your quick reply Michel, Markus and Mauro!!
[snip]
[ 789.484000] cx23885 driver version 0.0.1 loaded
[ 789.484000] ACPI: PCI Interrupt :04:00.0[A] - GSI 17 (level, low)
- IRQ 17
[ 789.484000]
Correct, it's a rebranded Haupauge HVR1500.
Unlike the previous poster I'm not getting frontend initialization
failed which is promising, but when I run:
/usr/bin/scan
/usr/share/doc/dvb-utils/examples/scan/atsc/us-ATSC-center-frequencies-8VSB
I get a bunch of tuning failed messages
On Sat, Mar 1, 2008 at 2:06 PM, Steven Toth [EMAIL PROTECTED] wrote:
Correct, it's a rebranded Haupauge HVR1500.
Unlike the previous poster I'm not getting frontend initialization
failed which is promising, but when I run:
/usr/bin/scan
Ben Firshman wrote:
Mine has now been running for a couple of days now without problems, I will
let you know if I lose a tuner.
Strange, mine's still crashing out after a couple of hours. Just out of
curiosity...
- What kernel are you running? Distribution? Driver version?
- If you're
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning and szap work fine.
Thanks for that hint!
You're welcome.
BTW: do you receive broken streams (symbol rate 22000 or 27500)?
Currently I get a loss of about 1 TS packet
Dominik Kuhlen wrote:
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning and szap work fine.
Thanks for that hint!
You're welcome.
BTW: do you receive broken streams (symbol rate 22000 or 27500)?
Currently I get a loss of about 1
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter, LNBP21_PCL,
LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with
Simeon Simeonov wrote:
With 72e81184fb9f I get lock 5/10 times of the times and with a9ecd19a37c9
9/10 times.
But with 72e81184fb9f I couldn't get neither my rotor nor diseqc switch to
work as
opposed to the tip where both work with some problems - sending more than
2 diseqc messages
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings.
At the moemnt I have no clue why I am having this diseqc issue. I also checked
the
logs and I see from time to time diseqc_fifo_full messages but there is no
correlation
with the problem. For example I have not
Simeon Simeonov wrote:
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings.
At the moemnt I have no clue why I am having this diseqc issue. I also
checked the
logs and I see from time to time diseqc_fifo_full messages but there is no
correlation
with the
Yes, ocasionally I see the message from stb0899_wait_diseqc_fifo_empty()
but trying to increase the time in the call did not help. So I am not sure if
my problem is related to that message.
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Hi,
I've tried to add an extra argument to gnutv to set the size of the
dvb_ringbuffer via
DMX_SET_BUFFER_SIZE.
I have not really understood the difference between dvr and demux.
It seems that gnutv uses the dvr to read from the DVB card and then copies the
content to a file.
I call
int
Hi,
Help, please.
My TV card: AVerMedia_AverTV_Hybrid_FM_PCI_A16D
uname -a:
Linux ubuntu 2.6.22-14-generic #1 SMP Sun Oct 14 21:45:15 GMT 2007
x86_64 GNU/Linux
I have successfuly installed this for DVB-T using the instructions at
Marcus's
Hi again,
Thanks for all the replies! I've checked out a few programs and decided
to use dvbstream as Tim Hewett suggested.
Obviously, you seem to have never actually tried VDR. It's
extremely lean and clean and it don't need to run with any output.
You can telnet into it and schedule
On Fri, 2008-02-29 at 21:31 +, Philip Pemberton wrote:
Answers are 2.6.24-8-generic, Mythbuntu 8.04 alpha 2, Hg
615ce34, and
yes (EIT scanning on) for me, and firmware is dvb-usb-dib0700-1.10.fw
(in
/lib/firmware/2.6.24-8-generic). I'm planning to try
39 matches
Mail list logo