On Fri, Oct 2, 2009 at 1:23 PM, Christophe Boyanique
tof+linux-...@raceme.org wrote:
Hello,,
Is anyone on the list currently using a DVB-T card that has DUAL
tuners (i.e. I'm looking to replace Hauppage 500's which work great).
That is an excellent question and I am looking forward to here
On Fri, Oct 2, 2009 at 6:27 PM, Christophe Boyanique
tof+linux-...@raceme.org wrote:
On Fri, Oct 02, 2009 at 01:48:17PM -0400, Devin Heitmueller wrote:
I am also looking for a device (PCIe preferred, or PCI or at worst USB
stick) with a dual HD tuner which is buyable from France or Europe
On Thu, Oct 1, 2009 at 6:03 PM, Wellington Terumi Uemura
wellingtonuem...@gmail.com wrote:
It's not the answer that I was looking for but looks like the thing is
much more complex than just compile and run drivers, this gives me
another perspective, like a dead end.
Thank you Mike.
Well,
Mauro,
Please pull from http://kernellabs.com/hg/~dheitmueller/misc-fixes3
for the following:
xc5000: add FM radio support
xc5000: make the definition of the FM input part of the xc5000 config struct
em28xx: Add support for new variant of KWorld 2800d
em28xx: fix support for Terratec Cinergy T
On Mon, Sep 28, 2009 at 11:03 AM, Filipe Rosset rosset.fil...@gmail.com wrote:
You should use the em28xx_errdev() instead of em28xx_err() if your
intent is to insert dev-name in front of the message.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from
On Mon, Sep 28, 2009 at 11:50 AM, Marios Andreopoulos
opensou...@andmarios.com wrote:
Hello,
I own a KWORLD 323U USB hybrid tv tuner.
My problem is about the analog sound. When I am trying to access the alsa
audio interface of this device I get kernel panics.
I use commands like these in
On Mon, Sep 28, 2009 at 11:54 AM, David T. L. Wong
davidtlw...@gmail.com wrote:
Hello List,
cx23885 card Magic-Pro ProHDTV Extreme 2, has a cx23885 GPIO pin to
select Analog TV+Radio or Digital TV. How should I add that GPIO setting
code into cx23885?
The current model that all operations
On Mon, Sep 28, 2009 at 12:19 PM, Filipe Rosset rosset.fil...@gmail.com wrote:
Em 28-09-2009 12:24, Devin Heitmueller escreveu:
On Mon, Sep 28, 2009 at 11:03 AM, Filipe Rosset rosset.fil...@gmail.com
wrote:
You should use the em28xx_errdev() instead of em28xx_err() if your
intent
On Mon, Sep 28, 2009 at 12:43 PM, Filipe Rosset rosset.fil...@gmail.com wrote:
Em 28-09-2009 13:23, Devin Heitmueller escreveu:
Filipe,
Your updated patch is going to effectively print dev-name twice.
Please look at the definition of em28xx_errdev() and resubmit an
updated patch that takes
On Mon, Sep 28, 2009 at 2:25 PM, Dick d...@mrns.nl wrote:
Hi all,
I'm trying to use my TerraTec Grabby (em2860 using em28xx module, tip v4l-dvb
sources). Everything works using mplayer.
Now I'd like to use the USB videograbber from gstreamer 0.10.24 but I get the
following error in dmesg:
On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl mobile.leec...@gmail.com wrote:
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the
Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the
same. So, like it's there for the Hauppauge, I added
On Sat, Sep 26, 2009 at 8:23 PM, Uros Vampl mobile.leec...@gmail.com wrote:
On 26.09.09 16:59, Devin Heitmueller wrote:
On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl mobile.leec...@gmail.com wrote:
Alright, success!!!
Since it seems everything for this tuner is set up the same
On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl mobile.leec...@gmail.com wrote:
On 25.09.09 20:22, Uros Vampl wrote:
On 25.09.09 13:41, Devin Heitmueller wrote:
Interesting. Have you tried the A/V inputs (as opposed to the tuner)?
That might help us identify whether it's an issue
On Wed, Sep 23, 2009 at 3:28 PM, Aleksandr V. Piskunov
aleksandr.v.pisku...@gmail.com wrote:
Mmm, tested that tuner under windows, it autodetects all 3 sound carrier sub-
standards instantly: PAL-BG, PAL-DK, PAL-I.
In order to test, I connected ancient Panasonic VCR that has a built-in tuner
On Tue, Sep 22, 2009 at 7:45 AM, fogna fogna fogn...@gmail.com wrote:
Hi Devin
thanks for the reply, this means we need to contact Terratec asking them to
donate a device to developers ? or do the community have to donate one ?
thanks
Well, if Terratec were willing to donate some hardware,
On Tue, Sep 22, 2009 at 5:12 AM, Uros Vampl mobile.leec...@gmail.com wrote:
On 21.09.09 18:29, Devin Heitmueller wrote:
On Mon, Sep 21, 2009 at 6:15 PM, Uros Vampl mobile.leec...@gmail.com wrote:
I tried arecord/aplay and sox with tvtime, and also mplayer (which
has
built-in audio support
On Sat, Sep 19, 2009 at 4:57 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On Friday 18 September 2009 06:40:34 Devin Heitmueller wrote:
Hello Hans,
If you can find a few minutes, please take a look at the following
tree, where I added initial support for including the ALSA devices in
the MC
On Mon, Sep 21, 2009 at 3:34 PM, MarSarK mar...@marsark.sytes.net wrote:
hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at
my notebook).
uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14
On Mon, Sep 21, 2009 at 3:58 PM, MarSarK mar...@marsark.sytes.net wrote:
Dne Po 21. září 2009 21:47:04 jste napsal(a): On Mon, Sep 21, 2009 at 3:34
PM, MarSarK mar...@marsark.sytes.net wrote:
hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
I have tried kernels from 2.6.27 to 2.6.31
On Sat, Sep 19, 2009 at 10:05 AM, Adriano Gigante adrig...@yahoo.it wrote:
Hy all,
after Markus Rechberger has discontinued the development of em28xx-new
kernel driver, device Terratec Cinergy Hybrid T USB XS FM is no more
supported under linux.
I also built and installed from
On Fri, Sep 18, 2009 at 1:11 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Em Fri, 18 Sep 2009 00:40:34 -0400
Devin Heitmueller dheitmuel...@kernellabs.com escreveu:
Hello Hans,
If you can find a few minutes, please take a look at the following
tree, where I added initial support
2009/9/18 Matthias Bläsing mblaes...@doppel-helix.eu:
Hello,
when I plugin my usb video grabber, it is misdetected (this email is the
reaction to the request in the module output):
Sep 18 20:27:19 prometheus kernel: [15016.458509] em28xx: New device @ 480
Mbps (eb1a:2860, interface 0,
2009/9/18 Matthias Bläsing mblaes...@doppel-helix.eu:
Hey David,
thanks for this very fast reply.
Am Freitag, den 18.09.2009, 15:01 -0400 schrieb Devin Heitmueller:
2009/9/18 Matthias Bläsing mblaes...@doppel-helix.eu:
Hello,
when I plugin my usb video grabber, it is misdetected
Hello Hans,
If you can find a few minutes, please take a look at the following
tree, where I added initial support for including the ALSA devices in
the MC enumeration. I also did a bit of cleanup on your example tool,
properly showing the fields associated with the given node type and
subtype.
Hello Hans,
If you can find a few minutes, please take a look at the following
tree, where I added initial support for including the ALSA devices in
the MC enumeration. I also did a bit of cleanup on your example tool,
properly showing the fields associated with the given node type and
subtype
On Wed, Sep 16, 2009 at 9:09 AM, SebaX75 seba...@yahoo.it wrote:
On 12/09/2009 15:33, Devin Heitmueller has wrote:
On Sat, Sep 12, 2009 at 6:15 AM, Miroslav Pragl - mailing lists
lists.subscri...@pragl.cz wrote:
Hello,
I've compiled and installed latest v4l-dvb and dvb-apps, extracted
On Wed, Sep 16, 2009 at 4:16 AM, Olive not0read0...@yopmail.com wrote:
Hello,
I own a TV card advertised as Pinnacle Hybrid stick solo. After
installing the xc3028-v27.fw firmware; I can watch analog TV with the
em28xx module. The problem is with the digital TV. The devices /dev/dvb*
are not
On Tue, Sep 15, 2009 at 2:50 PM, david may david.ma...@ntlworld.com wrote:
OC you do realize that IF the DVB/linuxTV devs cant even make a simple and
quick LiveCD with a VLC and streaming apps clients and servers connecting to
a web sever some were
for popping into ANY laptop that happens to
Hello Mauro,
Please PULL from
http://kernellabs.com/hg/~dheitmueller/em28xx-vbi-codingstyle/ for the
codingstyle fixes for my em28xx VBI support:
em28xx: remove text editor tags from em28xx-vbi.c
em28xx: fix codingstyle issues in em28xx-video.c
em28xx: fix codingstyle issues introduced with VBI
On Sun, Sep 13, 2009 at 10:58 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Em Fri, 11 Sep 2009 00:00:35 -0400
Devin Heitmueller dheitmuel...@kernellabs.com escreveu:
Hello Mauro,
Please PULL from http://kernellabs.com/hg/~dheitmueller/em28xx-vbi3
for the following
em28xx: better
On Sat, Sep 12, 2009 at 6:15 AM, Miroslav Pragl - mailing lists
lists.subscri...@pragl.cz wrote:
Hello,
I've compiled and installed latest v4l-dvb and dvb-apps, extracted xceive
firmware, so far so good. Distro is Fedora 11, x64 (2.6.30.5-43.fc11.x86_64)
Unfortunately scan finds only the
On Sat, Sep 12, 2009 at 9:31 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
True. Choosing the better approach is very important since, once merged, we'll
need to stick it for a very long time.
I saw your proposal of a ioctl-only implementation for the media control. It
is
important
On Fri, Sep 11, 2009 at 11:13 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Em Thu, 10 Sep 2009 23:35:52 +0200
Hans Verkuil hverk...@xs4all.nl escreveu:
First of all, a generic comment: you enumerated on your RFC several needs
that
you expect to be solved with a media
On Fri, Sep 11, 2009 at 1:50 PM, Aleksandr V. Piskunov
aleksandr.v.pisku...@gmail.com wrote:
Ok, I did read basics of USB 2.0 protocol, gotta love these 600 page specs..
So using my fresh knowledge I went away and hacked ce6230 to use Isochronous
transfer endpoint instead of Bulk one. And it
On Fri, Sep 11, 2009 at 4:56 PM, Andy Walls awa...@radix.net wrote:
+ /* FIXME: hard-coded for NTSC support */
+ format-fmt.vbi.sampling_rate = 675 * 4 / 2; /* FIXME: ??? */
The BT.656 Pixel clock for both 60 Hz and 50 Hz systems is 13.5
Mpixels/sec. Unless you switch to PAL
2009/9/10 Martin Feuersänger m...@feuersaenger.de:
Hi list,
I own the above TV USB stick (the 2040:6500 version, which is revision 1
of the model)since a while now but didn't use it for several months (and
kernel versions) now. It used to work in previous kernel versions.
I guess that quite
On Thu, Sep 10, 2009 at 10:48 AM, Antti Palosaaricr...@iki.fi wrote:
Here it is, USB2.0 URB is now about 16k both af9015 and ce6230 devices.
Now powertop shows only about 220 wakeups on my computer for the both
sticks.
Please test and tell what powertop says:
On Thu, Sep 10, 2009 at 11:55 AM, Antti Palosaaricr...@iki.fi wrote:
Devin Heitmueller wrote:
The URB size is something that varies on a device-by-device basis,
depending on the bridge chipset. There really is no
one-size-fits-all value you can assume.
I doubt no. I tested last week
On Thu, Sep 10, 2009 at 12:48 PM, Antti Palosaaricr...@iki.fi wrote:
Yes thats just what I tried to say for. Look my previous thread where all
currently sizes are listed. We need to define suitable values that are used.
For example USB2.0 DVB-C, DVB-T, ATSC and same values for USB1.1 too. And
On Thu, Sep 10, 2009 at 1:12 PM, Hans Verkuilhverk...@xs4all.nl wrote:
Devin,
If we have a media controller framework, then we might be able to use that as
an alternative way to get timestamps. See note 4 at the end of the RFC that
I posted today. If it turns out that there is no decent way
On Thu, Sep 10, 2009 at 4:29 PM, Antti Palosaaricr...@iki.fi wrote:
Eh, not all needed, but we need some kind of rule of thumb which URB size is
suitable for bandwidth used. 512, 8k, 16k etc. It is not wise at all set it
to only 512 bytes when streaming whole TS example 22Mbit/sec. I have
Hello Mauro,
Please PULL from http://kernellabs.com/hg/~dheitmueller/em28xx-vbi3
for the following
em28xx: better describe vinctrl registers
em28xx: make video isoc stream work when VBI is enabled
em28xx: add raw VBI support for NTSC
em28xx: fix mmap_mapper with vbi
em28xx: restructure fh/dev
On Wed, Sep 9, 2009 at 12:14 PM, Edouard Marquezanimatri...@gmail.com wrote:
Hello,
I am using Gentoo with tuxonice-sources-2.6.3.0-r5 that is to say 2.6.30.5.
The compilation of v4l-dvb works well (the kernel which is chosen is the
right), but when I try to modprobe em28xx, I get this :
On Wed, Sep 9, 2009 at 2:13 PM,
animatri...@gmail.comanimatri...@gmail.com wrote:
Without mrechberger version, I can't find support for my Pinnacle PCTV Usb
stick.
If I had it, (after having installed the mrec driver), I have this error :
[ 909.128197] em28xx v4l2 driver version 0.0.1 loaded
On Wed, Sep 9, 2009 at 2:34 PM, animatri...@gmail.com
animatri...@gmail.com wrote:
I have this error, when I load the module :
[ 2122.708062] em28xx: Unknown symbol v4l2_i2c_new_probed_subdev
[ 2122.708402] em28xx: disagrees about version of symbol v4l2_i2c_subdev_addr
[ 2122.708404] em28xx:
On Wed, Sep 9, 2009 at 5:43 PM, Clinton Meyerclintonmeye...@gmail.com wrote:
Purchased a Hauppauge WinTV-HVR-950Q USB Hybrid TV stick to capture ATSC OTA
TV.
Am running MEPIS 8.06 on all three machines, Debian 5 Lenny based, KDE
3.5.10, kernel 2.6.27-1-mepis-smp
All three machines now have
On Tue, Sep 8, 2009 at 2:37 AM, Hans Verkuilhverk...@xs4all.nl wrote:
Hi all,
I'm looking for a v4l-dvb developer who is at the Plumbers Conference to
attend the audio miniconference on Wednesday morning (see schedule here:
http://linuxplumbersconf.org/2009/schedule/) and to discuss ways of
On Tue, Sep 1, 2009 at 9:37 PM, Dmitri Belimovd.beli...@gmail.com wrote:
Hi All
Add FM radio for the xc5000 silicon tuner chip.
diff -r 28f8b0ebd224 linux/drivers/media/common/tuners/xc5000.c
--- a/linux/drivers/media/common/tuners/xc5000.c Sun Aug 23 13:55:25
2009 -0300
+++
2009/8/30 Németh Márton nm...@freemail.hu:
Devin Heitmueller wrote:
I committed some changes to get this board working a few weeks ago. I
will check your dmesg output and see if the changes missed the merge
window. It's possible the changes didn't make it in time for 2.6.31,
so I will have
On Sun, Aug 30, 2009 at 11:26 AM, Jens
Reimannjens.reim...@s2003.tu-chemnitz.de wrote:
Hi,
it's again about the second revision of WinTV-HVR 900. I'm know about the
problems and conflicts with this device and the developers of the driver. I'm
still using the driver from Markus Rechberger
On Thu, Aug 27, 2009 at 1:06 PM, Peter
Brouwerpb.mailli...@googlemail.com wrote:
Mauro Carvalho Chehab wrote:
Hi Mauro, All
Would it be an alternative to let lirc do the mapping and just let the
driver pass the codes of the remote to the event port.
That way you do not need to patch the
On Thu, Aug 27, 2009 at 2:29 PM, Trent Piephoxy...@speakeasy.org wrote:
On Thu, 27 Aug 2009, Devin Heitmueller wrote:
The biggest challenge with that approach is that lirc is still
maintained out-of-kernel, and the inputdev solution does not require
lirc at all (which is good for inexperienced
On Thu, Aug 27, 2009 at 5:58 PM, Mauro Carvalho
Chehabmche...@infradead.org wrote:
Em Thu, 27 Aug 2009 21:36:36 +0300
Ville Syrjälä syrj...@sci.fi escreveu:
I welcome this effort. It would be nice to have some kind of consistent
behaviour between devices. But just limiting the effort to IR
On Tue, Aug 25, 2009 at 5:50 PM, Antti Palosaaricr...@iki.fi wrote:
USB2.0 BULK stream .buffersize is currently 512 and your patch increases it
to the 65424. I don't know how this value should be determined. I have set
it as small as it is working and usually it is 512 used almost every driver.
On Tue, Aug 25, 2009 at 6:09 PM, Antti Palosaaricr...@iki.fi wrote:
If demod (and tuner) is powered off by bridge (.power_ctrl) that's not
possible. Is there way to call bridge .power_ctrl to wake up demod and
tuner? I added param for demdod state to track sleep/wake state and return 0
in
2009/8/23 hermann pitton hermann-pit...@arcor.de:
Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:
hermann pitton wrote:
Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
Hi,
I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am
running Linux
On Sun, Aug 23, 2009 at 6:32 AM, xwang1...@email.it wrote:
Is there any news?
Xwang
xwang1...@email.it ha scritto:
Sorry, no news yet. I've been out of town for the last couple of days
and swamped with another project. I'm hoping to get to it soon.
Devin
--
Devin J. Heitmueller - Kernel
On Sat, Aug 22, 2009 at 4:09 PM, Atlanta Geekatlantag...@gmail.com wrote:
Using the linuxtv-dvb-apps
I find scan generates a file with only six parameters per digital
channel when generating the channels.conf file.
However czap requires 8 parameters.
This is for a cable network.
Does anyone
On Sat, Aug 22, 2009 at 8:32 PM, Faudalamen...@gmail.com wrote:
Greetings,
I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
stable as writing).
Following the manual at
On Sat, Aug 22, 2009 at 8:32 PM, Faudalamen...@gmail.com wrote:
Greetings,
I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
stable as writing).
Following the manual at
On Fri, Aug 21, 2009 at 2:07 AM, Mauro Carvalho
Chehabmche...@infradead.org wrote:
In brief, while I want to fix the driver issues, I recommend to avoid
buying any devices with tm5600/tm6000/tm6010 (and DRX demod) chips. There are
other offers at the market with drivers that work properly,
On Fri, Aug 21, 2009 at 12:34 PM, Andy Wallsawa...@radix.net wrote:
DIV_ROUND_CLOSEST is probably available only in more recent kernels.
When its use was added to those files, backward compatability was likely
not tested. Including compat.h is the proper thing to do.
Regards,
Andy
I'm
On Fri, Aug 21, 2009 at 3:27 PM, Giuseppe Bagnatobagg...@gmail.com wrote:
As of latest v4l-dvb trunk installed, detection of Pen Dual TV isn't correct:
Aug 21 20:26:55 box [ 2534.584239] usb 2-1: new high speed USB device
using ehci_hcd and address 7
Aug 21 20:26:55 box [ 2534.701630] usb
On Fri, Aug 21, 2009 at 4:05 PM, Baggiusbagg...@gmail.com wrote:
Hello Devin,
I have an Empire Media Pen Dual TV and it has same layout as Kworld dvb-t
310u.
while MSI Digivox A/D has similar layout and supports 1080i extra
resolution,
as
On Thu, Aug 20, 2009 at 1:54 PM, Shine Liushi...@foxmail.com wrote:
Patch to support for the GADMEI UTV330+ board. IR codec this board is
also added.
Based and tested on linux-2.6.31-rc6
Signed-off-by: Shine Liu shi...@foxmail.com
:
Reviewed-by: Devin Heitmueller dheitmuel...@kernellabs.com
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org
On Thu, Aug 20, 2009 at 6:16 PM, Michael Krufkymkru...@kernellabs.com wrote:
I have a server with three cx23885-based PCI-E boards, one of them
single tuner, the other two with dual tuners. This server has 8G RAM.
The single tuner is a Hauppauge board and the dual tuners are DViCO
boards.
, etc.
Reviewed-by: Devin Heitmueller dheitmuel...@kernellabs.com
Thanks,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info
On Wed, Aug 19, 2009 at 7:01 AM, Miguelm...@moviquity.com wrote:
Hello,
I am trying to set up the dvb-t device in my ubuntu 9.04.
As far as i can see , this device has tm6000 chipset but I don't get it
works. I have followed the guide of tvlinux.org:
On Wed, Aug 19, 2009 at 12:19 PM, Lou Otwaylot...@nildram.co.uk wrote:
Hi there,
I have a Hauppauge Nova-T 500 that is displaying some odd behaviour.
Often the device fails to tune after rebooting the host machine, due to a
failure to load firmware.
when the firmware fails to load, dmesg
On Wed, Aug 19, 2009 at 5:35 PM, Stefano De Dionigidedio...@gmail.com wrote:
Hello Devin,
I own a HVR-900 R2 and if you need help in testing i'd be more than
happy to help.
It's nice to see that for this device could there finally be light at
the end of the tunnel.
Hello Dedioste,
On Tue, Aug 18, 2009 at 7:00 AM, Johannes Stezenbachj...@linuxtv.org wrote:
I would be interested to know if someone _actually_ managed
to break their hardware by using buggy drivers.
The short answer is *absolutely*.
/me takes off driver developer hat and puts on hardware developer hat
In a
On Mon, Aug 10, 2009 at 6:27 PM, xwang1...@email.it wrote:
Hi,
my brother has brought a Dikom DK-300 usb hybrid tv receiver.
He will use it under windows, but I've tried it with the latest v4l-dvb
driver and I've discovered that it works well as analog tv (video and audio
work using the sox
On Fri, Aug 7, 2009 at 6:24 AM, xwang1...@email.it wrote:
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus'
drivers when he added the em28xx-audioep driver because, if I have correctly
understood, my device has a noy standard audio.
Is it
Mauro,
Please PULL from http://kernellabs.com/hg/~dheitmueller/empire-fix for
the following:
em28xx: fix regression in Empire DualTV digital tuning
This is yet another regression caused by the introduction of the
disable_i2c_gate field in the zl10353 driver.
Devin
--
Devin J. Heitmueller -
On Thu, Aug 6, 2009 at 9:54 AM, xwang1...@email.it wrote:
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the first
point (automatic recognition of the device when plugged in) ha been resolved
(using his development tree driver).
I've tried to scan for digital channels
On Thu, Aug 6, 2009 at 11:16 AM, xwang1...@email.it wrote:
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic.
Is there something I can do before testing so that to be sure that at least
all the file
On Wed, Aug 5, 2009 at 2:26 PM, Valerio Messinae...@iol.it wrote:
Devin Heitmueller wrote:
Which distro is this
Ubuntu 9.04
kernel 2.6.28-14-generic
and have you updated the kernel since checking out the code?
no
It's also possible if you were playing around with the mcentral
Hello Mauro,
I just noticed this patch:
em28xx: fix: some webcams don't have audio inputs
http://linuxtv.org/hg/v4l-dvb/rev/fe5eeff6644d
I have to wonder what the EM28XX_R00_CHIPCFG contained on this
particular device, since this cause should have already been handled
by the elseif() block on
On Wed, Aug 5, 2009 at 3:41 PM, Valerio Messinae...@iol.it wrote:
Devin Heitmueller ha scritto:
Try running this:
find /lib/modules/ -name em28*
snip
Yeah, that confirms it. The files in /lib/modules/2.6.28-14-generic/
are conflicting with the reset of the v4l-dvb codebase. Basically
On Wed, Aug 5, 2009 at 5:40 PM, Valerio Messinae...@iol.it wrote:
1 - On/off button on the IR as now, send a command to the desktop to start
the shutdown, reboot, suspend or hybernate window. To me should send
something to the active window only, like an ALT+F4 to close the windows
(for
On Wed, Aug 5, 2009 at 6:37 PM, Derek
Jenningsde...@jennings.homelinux.net wrote:
Hi
I have been chasing a problem with my Hauppauge Nova-T 500 Dual DVB-T card and
think it is the same problem reported here
http://osdir.com/ml/linux-media/2009-02/msg00948.html
The card worked perfectly with
On Wed, Aug 5, 2009 at 6:49 PM, Valerio Messinae...@iol.it wrote:
The map that I committed in does have all the keys mapped to input
event codes. You would need to reconfigure your input subsystem to
point the event codes to some other function.
the channel up/down, EPG, Teletext and circled
On Tue, Aug 4, 2009 at 8:46 AM, Kaya Samansamank...@netscape.net wrote:
Hi,
I hope I'm in the right place!!
I have a Hauppauge WinTV usb 1.1 tuner but I don't seem to be able to get it
working.
I am running Kubuntu 9.04 64-bit edition.
The tuner detects in the kernel as:
Bus 006 Device
On Tue, Aug 4, 2009 at 9:15 AM, Kaya Samansamank...@netscape.net wrote:
When you say that the device doesn't have an onboard tuner you mean that the
machine that it's attached to does the tuning? My card has S-Video, RCA and
Co-Ax inputs
I thought you are talking about this product (which
On Fri, Jul 31, 2009 at 9:43 PM, Valerio Messinae...@iol.it wrote:
Devin Heitmueller ha scritto:
Ah, good news: the patch I wrote that adds support for the remote
control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
I will prep this into a new
On Thu, Jul 30, 2009 at 6:32 AM, Lou Otwaylot...@nildram.co.uk wrote:
First I'd like to say thanks to the maintainers of the various HVR drivers,
the amount of work that goes in is much appreciated.
I notice from www.kernellabs.com that progress on the digital side for
SAA7164 devices is
On Mon, Jul 27, 2009 at 2:05 PM, Brandon Jenkinsbcjenk...@tvwhere.com wrote:
Greetings,
I received the following warnings while compiling a fresh pull today
from v4l-dvb.
CC [M] /root/drivers/v4l-dvb/v4l/pvrusb2-hdw.o
/root/drivers/v4l-dvb/v4l/pvrusb2-hdw.c: In function
On Fri, Jul 24, 2009 at 4:50 PM, Greg KHgre...@suse.de wrote:
On Fri, Jul 24, 2009 at 02:40:20PM -0300, Mauro Carvalho Chehab wrote:
Linus,
Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
for_linus
This series adds a new gscpca sub-driver
On Thu, Jul 23, 2009 at 5:40 AM, Markus Rechbergermrechber...@gmail.com wrote:
Hey,
[24004.018614] EEPROM ID= 0x9567eb1a, hash = 0x1067368a
[24004.018618] Vendor/Product ID= eb1a:2861
[24004.018622] AC97 audio (5 sample rates)
[24004.018626] 500mA max power
[24004.018629] Table at 0x04,
On Thu, Jul 23, 2009 at 7:46 AM, Markus Rechbergermrechber...@gmail.com wrote:
one thing, you might remove that autodetecting part and taking a
footprint of unknown devices
this causes more problems than everything else with those devices.
Maybe make this optional if someone wants to force
On Thu, Jul 23, 2009 at 8:10 AM, Markus Rechbergermrechber...@gmail.com wrote:
There's a pretty good disclosed detection from Empia available, the
linux kernel driver
just doesn't support it and very likely will never support it. Instead
of doing it the
wrong way it's better to turn it off or
On Thu, Jul 23, 2009 at 2:32 PM, Angelo Fontanafont...@gmail.com wrote:
Hi,
I'm trying to use my USB PTCV with linux (Debian Lenny).
After compiling, installing the latest version of v4l-dvb drivers and
loading em28xx-dvb module i can't use DVB features of the device.
This is the output of
On Wed, Jul 22, 2009 at 6:10 AM, Jelle de Jongjelledej...@powercraft.nl wrote:
So I felt like doing a field test, with my dvb-t test system.
Bus 001 Device 008: ID 2040:6502 Hauppauge WinTV HVR-900
Bus 001 Device 007: ID 2304:0226 Pinnacle Systems, Inc. [hex] PCTV 330e
Bus 001 Device 005: ID
On Wed, Jul 22, 2009 at 11:01 AM, Jelle de
Jongjelledej...@powercraft.nl wrote:
Funky timing of those mails :D.
I saw only after sending my mail that Steve was talking about analog and
that this is indeed different. Dual analog tuner support should be
possible right? Maybe with some other
On Wed, Jul 22, 2009 at 1:43 AM, Mauro Carvalho
Chehabmche...@infradead.org wrote:
I did last year some code optimizations and tests in order to support more
than one
em28xx device:
http://www.mail-archive.com/linux-...@vger.kernel.org/msg01634.html
In summary, a 480 Mbps Usb 2.0
On Wed, Jul 22, 2009 at 11:54 AM, Steven Tothst...@kernellabs.com wrote:
On 7/21/09 9:48 PM, Bob Hepple wrote:
On Tue, 21 Jul 2009 21:35:47 -0400
Jarod Wilsonja...@redhat.com wrote:
So its either I have *two* machines with bad, but only slightly bad,
and in the same way, PCI slots which
On Tue, Jul 21, 2009 at 9:09 PM, Steve Castellottis...@eyemagnet.com wrote:
Hello everyone-
Apologies in advance for spamming the list, but we're after adding dual
device support for the existing, GPL'd em28xx tuner driver currently in the
mainline Linux kernel. We do not have this
On Tue, Jul 21, 2009 at 10:19 PM, Steve Castellottis...@eyemagnet.com wrote:
On 07/21/2009 06:42 PM, Devin Heitmueller wrote:
On Tue, Jul 21, 2009 at 9:09 PM, Steve Castellottis...@eyemagnet.com
wrote:
We can confirm that a development system running Fedora 11 with the
latest stable
On Tue, Jul 21, 2009 at 11:47 PM, Steve Castellottis...@eyemagnet.com wrote:
On 07/21/2009 07:32 PM, Devin Heitmueller wrote:
I agree that *in theory* you should be able to do two devices. A back
of the envelope calculation of 640x480 at 30fps in YUVY capture should
be about 148Mbps
1001 - 1100 of 1306 matches
Mail list logo