On Tue, Jan 8, 2013 at 12:54 PM, Frank Schäfer
fschaefer@googlemail.com wrote:
Thank you for reporting this issue.
Is there any known kernel version where this has been working ?
Regards,
Frank
Frank,
Just an FYI: I'm already actively looking into this.
Devin
--
Devin J. Heitmueller
On Tue, Jan 8, 2013 at 1:40 PM, Frank Schäfer
fschaefer@googlemail.com wrote:
Bad news. :(
The patch seems to break USB bulk transfer mode. The framerate is zero.
I've tested with the Silvercrest webcam and the Cinergy 200. Both
devices work fine when selecting isoc transfers.
I'll take a
On Tue, Jan 8, 2013 at 6:18 PM, Simon Farnsworth
simon.farnswo...@onelan.com wrote:
The wireless folk use dBm (reference point 1 milliwatt), as that's the
reference point used in the 802.11 standard.
Perhaps we need an extra FE_SCALE constant; FE_SCALE_DECIBEL has no reference
point (so
On Mon, Jan 14, 2013 at 1:01 PM, nise.design nise.des...@gmail.com wrote:
After google search I think the problem may be come from connection between
DMB-TH drivers and dvb_frontend.c broken. I wanted to know any example code
or instruction about DVBv3 driver connect to dvb_frontend.c. Thank
On Tue, Jan 15, 2013 at 10:21 AM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Lets say SS, SNR, BER, UCB are queried, but only SS and SNR are ready to
be returned, whilst rest are not possible? As I remember DVBv5 API is
broken by design and cannot return error code per request.
The
On Mon, Nov 7, 2011 at 2:57 PM, Sylwester Nawrocki snj...@gmail.com wrote:
My knowledge about this driver is rather limited, in case of any issues I
guess it's best to ask Devin directly.
Part of the problem here is that the as102 chip is a fully
programmable part, and as a result the firmware
On Thu, Nov 10, 2011 at 6:31 PM, Patrick Dickey pdickeyb...@gmail.com wrote:
These are the files required to support the Pinnacle PCTV-80e USB Tuner in
video-4-linux. The files were originally downloaded from
http://www.kernellabs.com/hg/~dheitmueller/v4l-dvb-80e and modified to fix
On Thu, Nov 10, 2011 at 9:36 PM, Patrick Dickey pdickeyb...@gmail.com wrote:
Also, I started to clean up the files tonight. Then I started thinking
about what you told me about the as102 drivers, and thought I should
submit them as is and then start the cleanup and submit those
patches
On Sat, Nov 12, 2011 at 5:33 AM, jonathanjstev...@gmail.com
jonathanjstev...@gmail.com wrote:
Description of problem:
Support for Hauupauge HVR-4000 appears to be broken (again) in kernel mods.
This is a bit of a tale of woe, but this hardware is supposed to have been
sorted in stock kernel
On Sat, Nov 12, 2011 at 8:14 AM, Lars Schotte gu...@guttok.net wrote:
i am alos curious what he means by try to use it. i mean did he try
to use it with tzap, or szap, or w_scan, or what? because i dont even
know about mythtv, i only use dvbutils, mplayer, xine and vdr.
I agree with Lars on
If you're running Xen, then as far as I'm concerned you're on a
*totally* unsupported path. If it happened to have worked in some
previous version, it was dumb luck.
As for you issue when not using Xen, you're probably just missing the
Kaffeine libraries required for video playback (a common
On Thu, Nov 17, 2011 at 4:55 PM, Brian J. Murrell br...@interlinx.bc.ca wrote:
Hi.
Using dvb-apps 1.1.1+rev1355-1ubuntu1 on Ubuntu, I'm scanning my qam
channels with scan on both an Hauppage HVR-950q and HVR-1600 and the
resulting output contains channels which I know are both audio and video
On Fri, Nov 25, 2011 at 3:54 PM, Fredrik Lingvall
fredrik.lingv...@gmail.com wrote:
Hi All,
I have a Hauppauge HVR-900 HD with ID 2040:b138. Is this device supported,
and if so, which driver and firmware do I need?
Hi Frank,
It's not currently supported under Linux as it uses a demodulator
2011/11/30 Abylay Ospan aos...@netup.ru:
Hello,
We have ported linuxtv's cx23885+CAM en50221+Diseq to Windows OS (Vista, XP,
win7 tested). Results available under GPL and can be checkout from git
repository:
https://github.com/netup/netup-dvb-s2-ci-dual
Binary builds (ready to install)
On Wed, Nov 30, 2011 at 1:02 PM, Andreas Oberritter o...@linuxtv.org wrote:
Am I the only one who thinks this is a legally ambigious grey area?
Seems like this could be a violation of the GPL as the driver code in
question links against a proprietary kernel.
Devin, please! Are you implying
On Wed, Nov 30, 2011 at 2:58 PM, Andreas Oberritter o...@linuxtv.org wrote:
The point I'm trying to make: Someone made a presumably nice open source
port to a new platform and the first thing you're doing is to play the
GPL-has-been-violated-card, even though you're admitting that you don't
On Fri, Dec 2, 2011 at 2:41 PM, Fredrik Lingvall
fredrik.lingv...@gmail.com wrote:
The HVR 930C device has three connectors/inputs: an antenna input, an
S-video, and a composite video, respectively,
The provider I have here in Norway (Get) has both analog tv and digital
(DVB-C) so can I get
On Sat, Dec 3, 2011 at 12:42 PM, Alan Cox a...@lxorguk.ukuu.org.uk wrote:
On Sat, 3 Dec 2011 09:21:23 -0800
VDR User user@gmail.com wrote:
On Sat, Dec 3, 2011 at 8:13 AM, Andreas Oberritter o...@linuxtv.org wrote:
You could certainly build a library to reach a different goal. The goal
On Sun, Nov 20, 2011 at 9:56 AM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
diff --git a/drivers/media/common/tuners/xc5000.c
b/drivers/media/common/tuners/xc5000.c
index ecd1f95..048f489 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@
On Mon, Dec 5, 2011 at 1:35 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
What's up with this change? Is this a bugfix for some race condition?
Why is it jammed into a patch for some particular product?
It seems like a change such as this could significantly change the
timing of tuner
On Mon, Dec 5, 2011 at 1:46 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
On Mon, Dec 5, 2011 at 1:35 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
What's up with this change? Is this a bugfix for some race condition?
Why is it jammed into a patch for some particular product
On Mon, Dec 5, 2011 at 6:32 PM, Eddi De Pieri e...@depieri.net wrote:
Sorry, I think I applied follow patch on my tree while I developed
the driver trying to fix tuner initialization.
http://patchwork.linuxtv.org/patch/6617/
I forgot to remove from my tree after I see that don't solve
On Tue, Dec 6, 2011 at 8:43 AM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
The driver who binds everything is the bridge driver. In your case, it is
the au0828 driver.
What you're experiencing seems to be some race issue inside it, and not at
xc5000.
On a quick look on it, I'm noticing
On Tue, Dec 6, 2011 at 10:28 AM, Mark Lord ker...@teksavvy.com wrote:
It's always exhibited races for me here. I have long since worked around
the issue(s), so my own systems currently behave. But with the newer
HVR-950Q revision (B4F0), the issue is far more prevalent than before.
I'll ask
On Fri, Dec 9, 2011 at 5:11 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Could someone explain reason for that?
I dunno, but I think this needs to be fixed, at least when the frontend
is opened with O_NONBLOCK.
Are you doing the drx-k firmware load on dvb_init()? That could
easily
On Fri, Dec 9, 2011 at 8:37 PM, Andreas Oberritter o...@linuxtv.org wrote:
On 10.12.2011 00:43, Mauro Carvalho Chehab wrote:
On 09-12-2011 21:37, Mauro Carvalho Chehab wrote:
On 09-12-2011 20:33, Devin Heitmueller wrote:
On Fri, Dec 9, 2011 at 5:11 PM, Mauro Carvalho Chehab
mche...@redhat.com
Hello Andreas,
On Fri, Dec 9, 2011 at 9:06 PM, Andreas Oberritter o...@linuxtv.org wrote:
WTF, Devin, you again? I haven't asked anyone to upstream it. Feel free
to analyze the code and resubmit it.
1. It's marked with a subject line that starts with [PATCH]
2. It has your SIgned-Off-By
Hello Mauro,
On Sat, Dec 10, 2011 at 5:28 AM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Devin,
You're over-reacting. This patch were a reply from Andreas to a thread,
and not a separate patch submission.
Patches like are generally handled as RFC, especially since it doesn't
contain a
On Mon, Dec 12, 2011 at 10:58 AM, Yan Seiner y...@seiner.com wrote:
Also, just to be clear, the USB Live 2 doesn't have any onboard
hardware compression. It has comparable requirements related to USB
bus utilization as any other USB framegrabber. The only possible
advantage you might get is
On Mon, Dec 12, 2011 at 3:16 PM, Eddi De Pieri e...@depieri.net wrote:
Hi to all,
with latest git, w_scan partially working only if adding -t2 or t3.
It seems that scan quality of w_scan is lower if compared to dvb_app scan
Hi Eddi,
A really useful test would be to run the exact same scan
2011/12/21 Miroslav Slugeň thunder@gmail.com:
XC4000 based cards are not using AGC control in normal way, so it is
not possible to get signal level from AGC registres of zl10353
demodulator, instead of this i send previous patch to implement signal
level directly in xc4000 tuner and now
On Sun, Dec 25, 2011 at 9:11 AM, Hans Petter Selasky hsela...@c2i.net wrote:
These numbers should not be hardcoded, but extracted from the USB endpoint
descriptor!
--HPS
Hans is correct. I only hard-coded it at 564 as a quick hack when I
was bootstrapping the em2784 support. The code really
On Tue, Jan 3, 2012 at 1:05 PM, Tim richard...@hotmail.com wrote:
Currently I I am trying to attach the lgdt3304 at i2c address 0x0e on bus A
then try to attach the tda1827hdc2.. but the lgdt3304 never attaches
Just a suggestion: These sorts of problems are usually either you're
trying to
On Tue, Jan 5, 2010 at 12:50 PM, Franz Fürbaß franz.fuerb...@chello.at wrote:
Hello,
[1] . Can't scan for DVB-T channels with Hauppauge HVR 4000 HD.
[2] Got a scan problem with the Hauppauge HVR 4000 HD card.
If I try to scan for channels with the DVB-T frontend
On Tue, Jan 5, 2010 at 6:37 PM, Franz Fürbaß franz.fuerb...@chello.at wrote:
Ok, seems to work. I put an usleep(500); between close and open.
I will try to apply this to MythTV and w_scan as well.
You can certainly try that with w_scan and MythTV to see if it
improves your situation.
On Wed, Jan 6, 2010 at 5:00 AM, Harald Gustafsson hgu1...@gmail.com wrote:
Hi,
Thanks for working on improving the Nova T 500 performance, it is much
appreciated, and let me know if you need further help with debugging it.
I tried your dib0700-ir tree. My problems with the Nova T 500 and the
On Tue, Jan 5, 2010 at 3:40 AM, Michael Rüttgers
i...@michael-ruettgers.de wrote:
Hello,
a year ago I bought a device named Hama Video Editor, which was not
(and is not yet) supported by the em28xx driver.
So I played around with the card parameter and got the device basically
working with
Mauro,
Please PULL from
http://www.kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-2 for the
following:
cx18-alsa: Fix the rates definition and move some buffer freeing code.
cx18: address possible passing of NULL to snd_card_free
cx18-alsa: codingstyle cleanup
cx18-alsa: codingstyle cleanup
cx18:
On Thu, Jan 7, 2010 at 2:49 PM, istva...@mailbox.hu istva...@mailbox.hu wrote:
On 01/05/2010 02:25 AM, Raena Lea-Shannon wrote:
Thanks. Will try again later.
By the way, for those who would like to test it, here is a patch based
on Devin Heitmueller's XC4000 driver and Mirek Slugen's older
On Fri, Jan 8, 2010 at 8:55 PM, Ralph Siemsen ral...@netwinder.org wrote:
Now the driver loads, and I follow it up with modprobe tuner.
Unfortunately, no luck yet using tvtime, it just reports:
videoinput: No inputs available on video4linux2 device '/dev/video0'.
But I suspect that is a
On Sun, Jan 10, 2010 at 7:33 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Hi Devin,
Unfortunately, I got some merge conflicts with cx18 code from Andy, due to
the buffer handling changes. Could you please rebase your tree against tip,
solving those conflicts?
Sure, I'll try to do
On Sun, Jan 10, 2010 at 2:49 AM, Francesco Lavra
francescola...@interfree.it wrote:
Yes, the IR core is broken, a patch has been submitted by myself some
time ago (http://patchwork.kernel.org/patch/70126/), but hasn't made it
to v4l-dvb yet.
Thanks for the heads up. I actually didn't see that
Hello Mauro,
Please PULL from http://www.kernellabs.com/hg/~dheitmueller/dib0700_ir
for the following:
dib0700: rework IR logic for firmware 1.20
You had mentioned that you intended to do some porting of the dib0700
to use your new backend, so please do me a favor and merge this
*before* you
On Tue, Jan 12, 2010 at 4:26 PM, Hagen von Eitzen ha...@von-eitzen.de wrote:
Dear all,
as suggested by http://www.linuxtv.org/wiki/index.php/Bug_Report I report
several warnings and errors not yet covered in latest
http://www.xs4all.nl/~hverkuil/logs/Monday.log I get when compiling.
(The
On Wed, Jan 13, 2010 at 3:32 AM, xof x...@skynet.be wrote:
Are you sure? (it is an Ubuntu-only issue)
I can see several
#include asm/asm.h
in the v4l tree that compile fine on Ubuntu
but only linux/drivers/media/dvb/firewire/firedtv-1394.c contains
#include asm.h
and doesn't compile.
On Wed, Jan 13, 2010 at 9:00 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Michael Krufky wrote:
The same tree is also available using http instead of https:
http://www.kernellabs.com/hg/~dheitmueller/em28xx-pal-vbi-2
This should work for you without issue.
Ok. Applied, thanks!
On Sat, Jan 9, 2010 at 2:30 PM, Franklin Meng fmeng2...@yahoo.com wrote:
I tweaked the GPIO's a bit more for the Kworld 315U and switching between
analog and digital signals is more reliable now. Attached is an updated diff.
Hello Franklin,
This is pretty good stuff. A few
On Thu, Jan 14, 2010 at 10:35 AM, Andreas Besse be...@motama.com wrote:
if a system contains multiple DVB cards of the same type, how is the
order of devices determined by the driver/kernel?
I use 2 Technotrend S2-3200 cards in a system and observerd that if I
load the driver driver budget_ci
On Thu, Jan 14, 2010 at 11:01 AM, Andreas Besse be...@motama.com wrote:
yes if there are different drivers I already observed the behaviour that
the ordering gets flipped after reboot.
But if I assume, that there is only *one* driver that is loaded (e.g.
budget_av) for all dvb cards in the
On Thu, Jan 14, 2010 at 1:54 PM, Franklin Meng fmeng2...@yahoo.com wrote:
Unfortunately, I do not know the difference. I thought it might be to do
something to the tuner but I am not quite sure. If I remember correctly, the
traces that I obtained also showed a difference between the analog
On Thu, Jan 14, 2010 at 5:00 PM, CityK ci...@rogers.com wrote:
Franklin Meng wrote:
As far as I can tell, the Kworld 315U is the only board that uses this
combination of parts.. Thomson tuner, LG demod, and SAA7113. I don't think
any other device has used the SAA7113 together with a
On Fri, Jan 15, 2010 at 3:00 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
I've tried to tactfully point this out in the past, but PLEASE STOP
USING THE TRUNK AS YOUR PERSONAL DEVELOPMENT SANDBOX. These changes
should have gone into a branch, and you should have solicited testers
for
On Fri, Jan 15, 2010 at 6:00 PM, Oliver Endriss o.endr...@gmx.de wrote:
I believe your assumption is incorrect. I believe the enumeration
order is not deterministic even for multiple instances of the same
driver. It is not uncommon to hear mythtv users complain that I have
two PVR-150 cards
On Sun, Jan 17, 2010 at 5:18 AM, Patrick Boettcher
pboettc...@kernellabs.com wrote:
The 74e is not a dib0700-based device, my assumption at that time was wrong.
For the 74e afaik, there is no LinuxTV driver right now. (IIRC it is a Abilis
based design)
Patrick is correct in that the 74e is an
On Sun, Jan 17, 2010 at 2:05 AM, Franklin Meng fmeng2...@yahoo.com wrote:
I retested my device and tried several different GPIO sequences but so far
every time I change between the Analog and digital interface, the SAA7113
needs to be reinitialized. I tried leaving both the digital and
On Mon, Jan 18, 2010 at 10:01 AM, Valerio Bontempi
valerio.bonte...@gmail.com wrote:
Hi all,
I am still having problem using v4l-dvb drivers with Terratec Cinergy T USB
XS.
As reported in first mail, I am using the last version of v4l-dvb
drivers with few lines adjustment in order to make
On Mon, Jan 18, 2010 at 10:31 AM, Stefan Ringel stefan.rin...@arcor.de wrote:
I have a question. How are loaded the base firmware into xc3028, in
once or in a split ? It's importent for TM6010, the USB-Analyzer said
that it load it in once and then send a quitting reqeuest.
In most drivers,
On Mon, Jan 18, 2010 at 11:03 AM, Adriano Gigante adrig...@yahoo.it wrote:
Hi Devin,
The 0ccd:0043 is on my todo list of devices to work on (they sent me a
sample board), although it's not the highest priority on my list given
how old it is.
Did they sent you also a 0ccd:0072 card
On Mon, Jan 18, 2010 at 11:11 AM, Ismo Kuhmonen ismo...@gmail.com wrote:
Hi
Why my Pinnacle DVB-T 73€ USB not working?
Are you running the current v4l-dvb tree? Support for the 73e was
introduced into the v4l-dvb tree on September 2nd, so the changes
probably haven't gotten into whatever
Hello Markus,
On Mon, Jan 18, 2010 at 11:29 AM, Markus Rechberger
mrechber...@gmail.com wrote:
Just fyi there's a hardware bug with the 0072/terratec hybrid xs fm
(cx25843 - xc5000):
http://img91.imageshack.us/i/0004qf8.png/
http://img104.imageshack.us/i/0009cp4.png/
nothing that
Hello Mauro,
Please PULL from
http://kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-3 for the
following:
cx18-alsa: Fix the rates definition and move some buffer freeing code.
cx18: address possible passing of NULL to snd_card_free
cx18-alsa: codingstyle cleanup
cx18-alsa: codingstyle cleanup
Hello Mauro,
Please PULL from
http://kernellabs.com/hg/~dheitmueller/xc3028-regression for the
following:
xc3028: fix regression in firmware loading time
This is a fix for a regression you introduced into the tuner-xc2028
driver in rev 12824.
Devin
--
Devin J. Heitmueller - Kernel Labs
Hello Mauro,
I find it somewhat unfortunate that this is labeled ANNOUNCE instead
of RFC. It shows how little you care about soliciting the opinions
of the other developers. Rather than making a proposal for how the
process can be improved and soliciting feedback, you have chosen to
decide for
On Tue, Jan 19, 2010 at 9:20 PM, Roel Kluin roel.kl...@gmail.com wrote:
Regardless of the state-Mode in both cases the same value was
written.
If state-Mode wasn't set, it is always 0.
Signed-off-by: Roel Kluin roel.kl...@gmail.com
---
drivers/media/common/tuners/mxl5005s.c | 7 +++
On Wed, Jan 20, 2010 at 12:26 PM, Morten Friesgaard
friesga...@gmail.com wrote:
Hello.
I installed mythbuntu 9.10 this week on some old hardware, I had a
Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to
gentoo
However, I want to record HD signal, so I plugged in a Eyetv
On Fri, Jan 22, 2010 at 11:18 AM, Morten Friesgaard
friesga...@gmail.com wrote:
Actually I don't understand why this em28xx driver is the only one
being patched, guess that reduces backward compability!? :-P
There are many drivers actively being developed. What I'm trying to
say is that the
On Fri, Jan 22, 2010 at 12:48 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
if (stv090x_i2c_gate_ctrl(fe, 1) 0)
goto err;
tuner access
if (stv090x_i2c_gate_ctrl(fe, 0) 0)
goto err;
Ok. It is very unusual to have a lock internally like the above, since
On Fri, Jan 22, 2010 at 1:23 PM, Manu Abraham abraham.m...@gmail.com wrote:
The point there is that it is a dual demod which implements a FSM for
it's tuner flow control and hence. The demodulators in the tree are
generally single/standalone and don't need such a FSM to handle that.
Even if
On Fri, Jan 22, 2010 at 2:11 PM, Manu Abraham abraham.m...@gmail.com wrote:
I think you understood incorrectly. Generally most demodulators have
an option to detect the I2C stop bit, thereby automatically disabling
the gate, while some don't. In those cases, you don't even need a
On Fri, Jan 22, 2010 at 3:22 PM, Manu Abraham abraham.m...@gmail.com wrote:
On Fri, Jan 22, 2010 at 11:40 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
Also, the dvb_frontend.c makes calls to i2c_gate_ctrl() at various
points, so you would need to ensure that none of those occur
On Fri, Jan 22, 2010 at 3:59 PM, Manu Abraham abraham.m...@gmail.com wrote:
No, rather on frontend shutdown, demodulator sleep() is called
instead. demodulator sleep() shuts down the tuner, AFAIR. This is the
original and correct behaviour for dvb frontend.
Both the tuner and frontend are
On Fri, Jan 22, 2010 at 4:32 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
There is one remaining checkpatch warning:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#45: FILE: drivers/media/video/cx18/cx18-driver.c:52:
+EXPORT_SYMBOL(cx18_ext_init);
On Fri, Jan 22, 2010 at 4:55 PM, Mauro Carvalho Chehab
mauroche...@gmail.com wrote:
Ah, I forgot to mention: if you're interested on seeing the commits, you
need to subscribe linuxtv-comm...@linuxtv.org. In addition to the -hg
commits that were available there since the beginning of the -hg
On Fri, Jan 22, 2010 at 5:03 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
I'm actually on linuxtv-commits, but I didn't get any of the
notifications. Am I missing something?
Nevermind. I didn't see your note about the first few having been missed.
Cheers,
Devin
--
Devin J
On Mon, Jan 25, 2010 at 11:45 AM, Theodore Kilgore
kilg...@banach.math.auburn.edu wrote:
On Mon, 25 Jan 2010, Mauro Carvalho Chehab wrote:
Hi Devin/Andy/Jean,
snip
The sq905c has a warning.
snip
drivers/media/video/gspca/sq905c.c: In function ?sd_config?:
On Mon, Jan 25, 2010 at 3:05 PM, Morten Friesgaard friesga...@gmail.com wrote:
Sound like a lot of work, and it would be easier just to buy a
functional tuner :)
Guess I'm busy enough. However, I did manage to find some more info,
for someone to use someday :)
/Morten
Model: EU 2008
USB
On Wed, Jan 27, 2010 at 4:00 PM, Sebastian Spiess
sebastian.spi...@gmail.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi there,
below is my dmesh output for my Pinnacle PCTV Hybrid Pro
hope it helps
[ 8899.390876] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870,
On Fri, Jan 29, 2010 at 11:02 AM, David Henig dhhe...@googlemail.com wrote:
Thanks, I appear to have the headers and no longer have to do the symlink,
but still getting the same error - any help gratefully received, or do I
need to get a vanilla kernel?
Open up the file v4l/.config and change
Hi Andy,
On Thu, Jan 28, 2010 at 9:24 PM, Andy Walls awa...@radix.net wrote:
Devin,
I found interesting system interactions. On my dual core x86_64 Fedora
12 machine loading an HVR-1600 cold (no firmware has been loaded yet),
the pulseaudio daemon opens up a CX23418 ALSA node almost
On Fri, Jan 29, 2010 at 1:40 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
I doubt it would solve. IMO, having it modular is good, since you may not
need cx18 alsa on all devices.
Modularity is good, but we really need to rethink about the way we are
loading these modules (this applies to
On Fri, Jan 29, 2010 at 2:59 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
The asynchronous load were added not to improve the boot load time, but to
avoid some troubles that happens when the load is synchronous.
I don't remember what were the exact trouble, but I suspect that it was
On Mon, Feb 1, 2010 at 2:49 PM, Arnaud Boy psyka...@gmail.com wrote:
Hi!
I've a card PINNACLE PCTV HYBRID PRO (2) with the PCI ID
0x2304:0x0226. This is work on analog mode but the em28xx module
don't register dvb interface.
I think the card could work if we uncomment the commented part in
On Mon, Feb 1, 2010 at 3:35 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
add Terratec Cinergy Hybrid XE
bugfix i2c transfer
add frontend callback
add init for tm6010
add digital-init for tm6010
add callback for analog/digital switch
bugfix usb transfer in DVB-mode
signed-off-by: Stefan
On Mon, Feb 1, 2010 at 4:23 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
You should start by breaking it down into a patch series, so that the
incremental changes can be reviewed. That will allow you to explain
in the patch descriptions why all the individual changes you have made
are
Hello all,
I am doing some quality improvements for a couple of the
em28xx/saa7113 designs, and I found a pretty serious problem which
appears to have been there for some time.
In fact, the regression was introduced when the saa7115 support was
added in 2005 (hg revision 2750). This change
On Tue, Feb 2, 2010 at 7:29 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
The better is to allow enabling/disabling the anti-alias via ctrl.
Whatever default is chosen, the driver may adjust the control default
at the board initialization, or even blocking the control when the
other mode
On Wed, Feb 3, 2010 at 3:36 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1114,7 +1122,11 @@ static int xc2028_set_params(struct
On Wed, Feb 3, 2010 at 3:40 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/staging/tm6000/hack.c
+++ b/drivers/staging/tm6000/hack.c
snip
This patch shouldn't be merged at all. You should figure out the
correct zl10353_config
On Wed, Feb 3, 2010 at 3:38 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -45,6 +45,8 @@ struct zl10353_config
/* clock control registers
On Wed, Feb 3, 2010 at 3:31 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -221,12 +239,13 @@ struct usb_device_id tm6000_id_table [] = {
{
On Wed, Feb 3, 2010 at 3:50 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
Am 03.02.2010 21:25, schrieb Mauro Carvalho Chehab:
This one is a very obscure patch. What are you doing this patch and why?
Stefan Ringel wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
---
On Wed, Feb 3, 2010 at 8:51 PM, Andy Walls awa...@radix.net wrote:
With all that said, if you have a baseband Luma or Chroma signal with
strong spurious high frequency components (crappy source, or you're
overdriving the front end and getting intermods), then keep the
anti-alias filter turned
Hey Andy,
On Thu, Feb 4, 2010 at 11:15 PM, Andy Walls awa...@radix.net wrote:
Hmmm. The AGC (or static gain level?) of the amplifier in the SAA7113
before the anti-alias filter may be set too high causing the clipping
(intermods) there. It may be worth looking at the gain setting for that
Hi Andy,
Thanks for taking the time to do some testing in your environment.
On Sun, Feb 7, 2010 at 7:10 PM, Andy Walls awa...@radix.net wrote:
My observations:
1. With the amplifier on and anti-alias filter off things looked fine.
2. With the amplifier on and anti-alias filter on things
Hello Mr. Shack,
On Mon, Feb 8, 2010 at 8:43 AM, Chicken Shack chicken.sh...@gmx.de wrote:
I vote for Andy Walls, Devin Heitmueller. There are a couple of capable
candidates here who can really do that job with a better output for the
whole Linux community.
There is ABSOLUTELY NO necessity
On Mon, Feb 8, 2010 at 11:43 PM, Richard Lemieux rlem...@cooptel.qc.ca wrote:
Hi,
I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that
activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has
run (and is no longer in use by an application) triggers
On Tue, Feb 9, 2010 at 10:19 AM, Patrick Cairns
patrick_cai...@yahoo.com wrote:
Hi Andy
Andy Walls wrote:
Hi Patrick,
On Tue, 2010-02-09 at 03:35 -0800, Patrick Cairns wrote:
Hello
I'm testing use of multiple Leadtek WinFast DVR3100 H cards for a
project. I've had large numbers of
On Tue, Feb 9, 2010 at 8:44 AM, Richard Lemieux rlem...@cooptel.qc.ca wrote:
Hi Devin,
I was previously running kernel vmlinux-2.6.29.5. I notice there was a
major
reorganization of some of the media structure between 2.6.29 and 2.6.32.
Can you tell me at wich kernel version the change
On Tue, Feb 9, 2010 at 9:14 PM, Andy Walls awa...@radix.net wrote:
Both Ooops below are related to userspace loading of firmware for the
HVR-950Q.
Very strange. The xc5000 function doesn't appear to really do
anything unusual. It calls request_firmware(), pushes the code into
the chip, and
On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux rlem...@cooptel.qc.ca wrote:
Andy,
This is a great answer! Thanks very much. When I get into this situation
again
I will know what to look for.
A possible reason why I got into this problem in the first place is that I
tried
many
801 - 900 of 1306 matches
Mail list logo
