Try enabling and reading the debug logs first to scavenge some output from both
tunnel ends. I found a lot of my brokenness enabling and reading the docs
listed in PFSense's debug log listing wikipage for IPSec linked in my previous
mails. It saves a lot of time over going in blind if you can ca
pfSense is a purpose-built router distribution, not a general-purpose
OS. While it may be possible to do what you propose, you *should not*
do this. Instead, if you require a database server, host it on a
separate machine.
On Mon, May 15, 2017 at 11:27 PM, mohsen Abbaspour
wrote:
> Hello everyon
Hello everyone
English is not my first language , excuse me for mistakes
I know that this is a repetitive questioning " How to install Mysql on
pfsense ?"
But , I searched almost topic about that , and finally I dont understand
what is correct solution ? maybe install Mysql on pfsense 2.4
> On May 15, 2017, at 10:02 PM, Laz C. Peterson wrote:
>
> Is Openswan what is used for IPSec?
Strongswan.
___
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
Matthew and Jim,
We didn’t get a chance to test anything today. It turned out to be “one of
those Mondays” … But there’s something really weird going on. I know nothing
about the subject compared to Matthew — and he claims he knows nothing about
it.. Ha ha …
Is Openswan what is used for IPSe
Based on the product page the max throughput as you described would seem to
be 200Mbps.
https://www.netgate.com/products/sg-1000.html
See the notes at the bottom of the page.
-Original Message-
From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of John DeSoi
Sent: Monday, May
Did you do the firmware upgrades?
On Mon, May 15, 2017 at 6:41 PM, John DeSoi wrote:
> I just purchased a SG-1000 for use with my Google Fiber installation. I
> did minimal configuration of the SG-1000, only changing the LAN address to
> 192.168.200.X (GF is 192.168.100.X). I hooked the WAN port
On Mon, May 15, 2017 at 3:24 PM, Daniel wrote:
> Hi there,
>
> it seems i found a bug. 2 times i run in the same Problem.
> Harddisk in my PfSense went to 100% Disk usages. (suricata logs)
> After booting in rescue mode and deleted 100GB Logs the pfSense loses the
> whole configuration and I need
Hi there,
it seems i found a bug. 2 times i run in the same Problem.
Harddisk in my PfSense went to 100% Disk usages. (suricata logs)
After booting in rescue mode and deleted 100GB Logs the pfSense loses the whole
configuration and I needed to reinstall the whole Server and restore a backup.
Thi
Hi there,
it seems i found a bug. 2 times i run in the same Problem.
Harddisk in my PfSense went to 100% Disk usages. (suricata logs)
After booting in rescue mode and deleted 100GB Logs the pfSense loses the whole
configuration and I needed to reinstall the whole Server and restore a backup.
Thi
I just purchased a SG-1000 for use with my Google Fiber installation. I did
minimal configuration of the SG-1000, only changing the LAN address to
192.168.200.X (GF is 192.168.100.X). I hooked the WAN port to one of the GF
ethernet ports and then my laptop to the LAN port on the SG-1000. Using G
Hi Jim,
> On May 14, 2017, at 6:38 PM, Jim Thompson wrote:
>> 3. Create one or more P2s to make selectors for traffic inclusion and
>> exclusion. Note there's a bug in PFSense, where if you do IPSec from not-LAN
>> interfaces, the traffic to the firewall's IP gets stolen unless you manually
>>
Hi Volker and thanks for your guidance.
I'm trying to avoid "MITM filtering" and Transparent-mode. I've read there
are problems with MITM when clients access bank sites.
As you said, keep the proxy and firewall separated is a better choice.
These service must be 100% controlled and sometimes this
Hello everyone,
I have installed pfSense successfully as a firewall / gateway, with snort.
I have some alerts working, for instance when I start a port scan from
an internal server to an external IP address.
I also have OpenVPN working nicely, using a tunnel set up.
Now, I would like to know
14 matches
Mail list logo
