Hi
I have a table in a document in which I use the dcolumn package to align
the decimal points. I have in the preamble the following:
\usepackage{dcolumn}
\newcolumntype{d}[1]{D{.}{.}{#1}}
I set the comumntype to d{6} and everything works fine - except the the
header of the column in the
Hi,
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
I have found a way to achieve this using Tex here:
http://www.tug.org/pipermail/texhax/2004-February/001680.html but the
only way I can manage to
On Fri, 24 Nov 2006 18:04:58 +0200
Gal Diskin [EMAIL PROTECTED] wrote:
1. Does anyone know how to embed this inside a regular lyx math
environment?
I'm not sure this is what you mean:
If you open an 'inline formula', type ^2cursor rightA, you should
have a left superscript?
It's not
I know what you mean, but I'm not looking for a hack.
I would like the symbols to be related to each other in the same way a
superscript on the right is related to the text after which it
appears. And anyhow, as you said, it doesn't look too good this way.
Gal
John Coppens wrote:
On
Gal Diskin schrieb:
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
Just use the normal sub/superscript procedure, but before you enter the
symbol. I attached a LyX example file that probably shows
Hi,
I would like to have a table float with 3 columns separated by a parting
line. I tried with the package multicol but I can't get the parting line.
If I don't put my table in a float it's no problem to get the parting
line. What's the mistake? Can I use multicol? (I would like to keep the
On Wed, 22 Nov 2006 11:00:37 -0500
Cynthia Johnson [EMAIL PROTECTED] wrote:
When I try to install LyX on Mac OS X by using the LyX installer, I
get the following error message:
sh: line 1: python: command not found (127)
From the terminal I type:
which python
The LyX installation on a Mac OS running 3.9 is not configured properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this problem, but no one can seem to answer it.)
When I open up
On Nov 24, 2006, at 12:56 PM, Paul Tremblay wrote:
The LyX installation on a Mac OS running 3.9 is not configured
properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this
Hello!
Is anyone able to import the following noweb file into LyX? It was generated
with LyX export function to Noweb from article noweb type. In my case LyX
imports the file, but the text is mangled (bla bla \nwfilename{noweb.nw}
\nwbegincode{1} ...). I have LyX 1.4.2. on Debian.
Thanks!
Hi alltogether,
I run lyx 1.4.3 on debian etch with two problems:
(1) locale de_DE could not be set - no German Umlaute in the menus,
however, the document text is ok
(2) scrolling (up, down) uses 100% CPU and is very very slowly (computer
freezes for some time but no crash)
The system
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
since your path is not one of those listed under prerequisites at
http://wiki.lyx.org/Mac/Mac#toc4
my first question would be if you have checked that pdflatex,
ghostscript and imagemagick work properly outside of
On Nov 24, 2006, at 3:56 PM, Paul Tremblay wrote:
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
since your path is not one of those listed under prerequisites at
http://wiki.lyx.org/Mac/Mac#toc4
my first question would be if you have checked that pdflatex,
icebna schrieb:
In the preamble I have included an image in format eps as logo. The
image can see in the visor dvi, but does not print her because says
that does not find her, nevertheless finds all the other images.
I assume that you mean with print to print it to PDF. The reason is, that
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
Thanks again Jens. I will try this in a bit.
In the mean time I wanted to report (in case this is valuable to anyone
else), that I was able to reconfigure LyX with some success. What I did
is create a soft link in
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
Paul,
looks like your python isn't being recognized, even though it
evidently exists. Under factory conditions, there is a python in /usr/
bin/python, but you probably installed another one (maybe MacPython).
Hi
I have a table in a document in which I use the dcolumn package to align
the decimal points. I have in the preamble the following:
\usepackage{dcolumn}
\newcolumntype{d}[1]{D{.}{.}{#1}}
I set the comumntype to d{6} and everything works fine - except the the
header of the column in the
Hi,
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
I have found a way to achieve this using Tex here:
http://www.tug.org/pipermail/texhax/2004-February/001680.html but the
only way I can manage to
On Fri, 24 Nov 2006 18:04:58 +0200
Gal Diskin [EMAIL PROTECTED] wrote:
1. Does anyone know how to embed this inside a regular lyx math
environment?
I'm not sure this is what you mean:
If you open an 'inline formula', type ^2cursor rightA, you should
have a left superscript?
It's not
I know what you mean, but I'm not looking for a hack.
I would like the symbols to be related to each other in the same way a
superscript on the right is related to the text after which it
appears. And anyhow, as you said, it doesn't look too good this way.
Gal
John Coppens wrote:
On
Gal Diskin schrieb:
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
Just use the normal sub/superscript procedure, but before you enter the
symbol. I attached a LyX example file that probably shows
Hi,
I would like to have a table float with 3 columns separated by a parting
line. I tried with the package multicol but I can't get the parting line.
If I don't put my table in a float it's no problem to get the parting
line. What's the mistake? Can I use multicol? (I would like to keep the
On Wed, 22 Nov 2006 11:00:37 -0500
Cynthia Johnson [EMAIL PROTECTED] wrote:
When I try to install LyX on Mac OS X by using the LyX installer, I
get the following error message:
sh: line 1: python: command not found (127)
From the terminal I type:
which python
The LyX installation on a Mac OS running 3.9 is not configured properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this problem, but no one can seem to answer it.)
When I open up
On Nov 24, 2006, at 12:56 PM, Paul Tremblay wrote:
The LyX installation on a Mac OS running 3.9 is not configured
properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this
Hello!
Is anyone able to import the following noweb file into LyX? It was generated
with LyX export function to Noweb from article noweb type. In my case LyX
imports the file, but the text is mangled (bla bla \nwfilename{noweb.nw}
\nwbegincode{1} ...). I have LyX 1.4.2. on Debian.
Thanks!
Hi alltogether,
I run lyx 1.4.3 on debian etch with two problems:
(1) locale de_DE could not be set - no German Umlaute in the menus,
however, the document text is ok
(2) scrolling (up, down) uses 100% CPU and is very very slowly (computer
freezes for some time but no crash)
The system
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
since your path is not one of those listed under prerequisites at
http://wiki.lyx.org/Mac/Mac#toc4
my first question would be if you have checked that pdflatex,
ghostscript and imagemagick work properly outside of
On Nov 24, 2006, at 3:56 PM, Paul Tremblay wrote:
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
since your path is not one of those listed under prerequisites at
http://wiki.lyx.org/Mac/Mac#toc4
my first question would be if you have checked that pdflatex,
icebna schrieb:
In the preamble I have included an image in format eps as logo. The
image can see in the visor dvi, but does not print her because says
that does not find her, nevertheless finds all the other images.
I assume that you mean with print to print it to PDF. The reason is, that
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
Thanks again Jens. I will try this in a bit.
In the mean time I wanted to report (in case this is valuable to anyone
else), that I was able to reconfigure LyX with some success. What I did
is create a soft link in
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel [EMAIL PROTECTED] wrote:
Paul,
looks like your python isn't being recognized, even though it
evidently exists. Under factory conditions, there is a python in /usr/
bin/python, but you probably installed another one (maybe MacPython).
Hi
I have a table in a document in which I use the dcolumn package to align
the decimal points. I have in the preamble the following:
\usepackage{dcolumn}
\newcolumntype{d}[1]{D{.}{.}{#1}}
I set the comumntype to d{6} and everything works fine - except the the
header of the column in the
Hi,
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
I have found a way to achieve this using Tex here:
http://www.tug.org/pipermail/texhax/2004-February/001680.html but the
only way I can manage to
On Fri, 24 Nov 2006 18:04:58 +0200
Gal Diskin <[EMAIL PROTECTED]> wrote:
> 1. Does anyone know how to embed this inside a regular lyx math
> environment?
I'm not sure this is what you mean:
If you open an 'inline formula', type ^2A, you should
have a left superscript?
It's not entirely nice,
I know what you mean, but I'm not looking for a "hack".
I would like the symbols to be "related" to each other in the same way a
superscript on the right is "related" to the text after which it
appears. And anyhow, as you said, it doesn't look too good this way.
Gal
John Coppens wrote:
Gal Diskin schrieb:
I'm trying to write subscript and superscript text on the left-hand side
of a symbol. However, I can't find any such feature for this in lyx.
Just use the normal sub/superscript procedure, but before you enter the
symbol. I attached a LyX example file that probably shows
Hi,
I would like to have a table float with 3 columns separated by a parting
line. I tried with the package multicol but I can't get the parting line.
If I don't put my table in a float it's no problem to get the parting
line. What's the mistake? Can I use multicol? (I would like to keep the
On Wed, 22 Nov 2006 11:00:37 -0500
Cynthia Johnson <[EMAIL PROTECTED]> wrote:
>
> When I try to install LyX on Mac OS X by using the LyX installer, I
> get the following error message:
>
> sh: line 1: python: command not found (127)
>
> From the terminal I type:
>
> which python
>
>
The LyX installation on a Mac OS running 3.9 is not configured properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this problem, but no one can seem to answer it.)
When I open up
On Nov 24, 2006, at 12:56 PM, Paul Tremblay wrote:
The LyX installation on a Mac OS running 3.9 is not configured
properly,
and I think to confiugre it should be easy. (I was not able to install
LyX using the installer because of problems with the script; I started
another thread on this
Hello!
Is anyone able to import the following noweb file into LyX? It was generated
with LyX export function to Noweb from article noweb type. In my case LyX
imports the file, but the text is mangled (bla bla \nwfilename{noweb.nw}
\nwbegincode{1} ...). I have LyX 1.4.2. on Debian.
Thanks!
Hi alltogether,
I run lyx 1.4.3 on debian etch with two problems:
(1) "locale de_DE could not be set" - no German Umlaute in the menus,
however, the document text is ok
(2) scrolling (up, down) uses 100% CPU and is very very slowly (computer
freezes for some time but no crash)
The system
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel <[EMAIL PROTECTED]> wrote:
> since your path is not one of those listed under "prerequisites" at
> http://wiki.lyx.org/Mac/Mac#toc4
> my first question would be if you have checked that pdflatex,
> ghostscript and imagemagick work properly
On Nov 24, 2006, at 3:56 PM, Paul Tremblay wrote:
On Fri, 24 Nov 2006 13:30:02 -0800
Jens Noeckel <[EMAIL PROTECTED]> wrote:
since your path is not one of those listed under "prerequisites" at
http://wiki.lyx.org/Mac/Mac#toc4
my first question would be if you have checked that pdflatex,
icebna schrieb:
> In the preamble I have included an image in format eps as logo. The
> image can see in the visor dvi, but does not print her because says
> that does not find her, nevertheless finds all the other images.
I assume that you mean with print to print it to PDF. The reason is,
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel <[EMAIL PROTECTED]> wrote:
Thanks again Jens. I will try this in a bit.
In the mean time I wanted to report (in case this is valuable to anyone
else), that I was able to reconfigure LyX with some success. What I did
is create a soft link in
On Fri, 24 Nov 2006 16:51:23 -0800
Jens Noeckel <[EMAIL PROTECTED]> wrote:
>
>
>
> Paul,
>
> looks like your python isn't being recognized, even though it
> evidently exists. Under factory conditions, there is a python in /usr/
>
> bin/python, but you probably installed another one (maybe
48 matches
Mail list logo