Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I would
like to get the same behavior as listings, i.e., keep line feed and
allow entering tabulation. Is it a way to define my style so that it
behaves that way?
I don't understand. What you want is
Uwe Stöhr wrote:
Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I
would like to get the same behavior as listings, i.e., keep line feed
and allow entering tabulation. Is it a way to define my style so that
it behaves that way?
I don't
On Jun 23, 2009, at 10:55 PM, BH wrote:
On Tue, Jun 23, 2009 at 5:12 PM, I wrote:
I am trying to install Songbird. I am following the instructions
on this
wiki page:
http://wiki.lyx.org/Layouts/Songbook#toc4...
Songbook is a LaTeX package, and so it belongs in your LaTeX tree
I
I am progressing... I have now defined a custom layout:
InsetLayout Schunk
LyxType custom
LabelString =...
LatexType none
Decorationminimalistic
Font
Family typewriter
Color
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
You will need to redefine the various environments to use their own
Danny Parker wrote:
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Try exporting the document to LaTeX and comparing to to
Philippe Grosjean wrote:
This solves my problem with respect of line feed. However, I cannot
tab/backtab in this environment. LyX says command disabled when I
try tab-insert or tab-delete commands.
How can I activate these commands in my layout, as it is in listings?
Without altering the
rgheck rgh...@bobjweil.com writes:
Philippe Grosjean wrote:
This solves my problem with respect of line feed. However, I cannot
tab/backtab in this environment. LyX says command disabled when I
try tab-insert or tab-delete commands.
How can I activate these commands in my layout, as it is in
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already offered them up on the
I just did that and I noticed a few differences. LyX is adding the
following lines that are not in the LaTeX file and I'm not sure where they
are coming from.
\usepackage[T1]{fontenc}
\usepackage{babel}
The only other difference I can see is that LyX has
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files? Is there a way in LyX to edit the
LaTex Source directly? I'm including two files test.tex is the original
LaTeX that compiles fine and
Paul A. Rubin wrote:
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already
Jean-Marc Lasgouttes wrote:
LFUN_TAB_INSERT currently
only works with listings. You might be able to redo the bindings so
that the tab key would insert a tab, perhaps via unicode-insert and
then the tab character, but I'm not sure.
This probably that this code should be made more generic
Danny Parker wrote:
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files?
Yes, to control the TOC. But they are harmless.
The crucial difference is that \maketitle comes
Here they are. My layout file is in the top post if you need that too.
Thanks for the help.
On Wed, Jun 24, 2009 at 10:42 AM, rgheck rgh...@bobjweil.com wrote:
Danny Parker wrote:
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
rgheck wrote:
Is there a place on the wiki where people can put modules they've
created for their own use that they think might be useful for others?
I've got a few of these myself.
There's a Layouts group, to which you can add pages listing and linking
to the layouts/modules you want to
Danny Parker wrote:
Here they are. My layout file is in the top post if you need that
too. Thanks for the help.
OK, the problem is that LyX outputs \maketitle as soon as you use a
layout that is not marked InTitle. Since you put \phmheader in ERT in
a Standard environment, that's not
Thanks again for the help. I added that to my layout but I'm still very new
to LyX (I had to look up what ERT, Evil Red Text, was) so I don't really
understand what you mean by use it instead of standard. Could you please
direct me to some reading or explain a little further.
Danny
On Wed, Jun
I am looking for an example of a latex or LyX document that used the
sciposter.cls document class.
If anyone has such an example, please email it to me or post it here.
Thanks,
Ehud Kaplan
Danny Parker wrote:
Thanks again for the help. I added that to my layout but I'm still
very new to LyX (I had to look up what ERT, Evil Red Text, was) so I
don't really understand what you mean by use it instead of
standard. Could you please direct me to some reading or explain a
little
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
On Wed, Jun 24, 2009 at 2:17 PM, rgheck rgh...@bobjweil.com
Matthias Bußjäger wrote:
YEAH, thanks!
If I make the LYX-Screen half-sized it only needs about 19% CPU and it's as
fast as on Linux - Realtime!
could you please report back one more thing - if you continually resize lyx
window to bigger and bigger size does cpu load also increases
Danny Parker wrote:
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
I guess it's a tex2lyx importation bug,
Daniel Joshua Stark wrote:
Dear All,
I was wondering if LyX can handle making posters. I've looked around some,
and I don't believe it can. However, I wanted to ask you all first before
giving up on using it to make one.
i'm just fighting the same problem. friend pointed me to baposter
Alex Fernandez wrote:
The forthcoming HTML output from LyX will therefore use png's initially and
shoot for MathML later. Note that the latter won't be as hard as writing a
LaTeX to MathML converter (though these do exist), since we already have a
parsed form of the LaTeX and can output
On Wed, Jun 24, 2009 at 11:02 PM, Pavel Sandasa...@lyx.org wrote:
Alex Fernandez wrote:
Once it is there it will be nice to have two options for HTML output.
Meanwhile eLyXer will use XHTML and CSS2 which can be rendered
acceptably on modern browsers.
yes this option would be good and i
Hey dudes,
i would like to plot a simple function like f(x)=3x^2. I know there
are 2 ways of doing that. The first is to generate an image with an
external tool like gnuplot and include that image in the document
(Which i don't want to do). I would rather use a latex package so the
plot will be
i would like to plot a simple function
I would try to use pstricks package for this.I have not used it recently
but I do recall that I generated the data points for my function and then used
pstricks code in ERT to include the datafile in my LyX doc.
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or directory
What happen?, help me, thank you,
Mauricio Fabian Duque Daza schreef:
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or
hi, all
I try to install metafile to EPS Converter, when I install it,
however, it will pop up one message invalid printer
and I go through it.
when I open one lyx file to output the PDF, it will pop up a message
metafile to EPS converter printer selected is not valid.
then lyx(1.6.3) crash
and
Phil schrieb:
i would like to plot a simple function
I would try to use pstricks package for this.
There also is a package called pgf, which includes tikz. Those two are
really powerful and do have very nice output (see
http://www.texample.net/tikz/examples/), but like pstricks, time
Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I would
like to get the same behavior as listings, i.e., keep line feed and
allow entering tabulation. Is it a way to define my style so that it
behaves that way?
I don't understand. What you want is
Uwe Stöhr wrote:
Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I
would like to get the same behavior as listings, i.e., keep line feed
and allow entering tabulation. Is it a way to define my style so that
it behaves that way?
I don't
On Jun 23, 2009, at 10:55 PM, BH wrote:
On Tue, Jun 23, 2009 at 5:12 PM, I wrote:
I am trying to install Songbird. I am following the instructions
on this
wiki page:
http://wiki.lyx.org/Layouts/Songbook#toc4...
Songbook is a LaTeX package, and so it belongs in your LaTeX tree
I
I am progressing... I have now defined a custom layout:
InsetLayout Schunk
LyxType custom
LabelString =...
LatexType none
Decorationminimalistic
Font
Family typewriter
Color
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
You will need to redefine the various environments to use their own
Danny Parker wrote:
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Try exporting the document to LaTeX and comparing to to
Philippe Grosjean wrote:
This solves my problem with respect of line feed. However, I cannot
tab/backtab in this environment. LyX says command disabled when I
try tab-insert or tab-delete commands.
How can I activate these commands in my layout, as it is in listings?
Without altering the
rgheck rgh...@bobjweil.com writes:
Philippe Grosjean wrote:
This solves my problem with respect of line feed. However, I cannot
tab/backtab in this environment. LyX says command disabled when I
try tab-insert or tab-delete commands.
How can I activate these commands in my layout, as it is in
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already offered them up on the
I just did that and I noticed a few differences. LyX is adding the
following lines that are not in the LaTeX file and I'm not sure where they
are coming from.
\usepackage[T1]{fontenc}
\usepackage{babel}
The only other difference I can see is that LyX has
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files? Is there a way in LyX to edit the
LaTex Source directly? I'm including two files test.tex is the original
LaTeX that compiles fine and
Paul A. Rubin wrote:
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already
Jean-Marc Lasgouttes wrote:
LFUN_TAB_INSERT currently
only works with listings. You might be able to redo the bindings so
that the tab key would insert a tab, perhaps via unicode-insert and
then the tab character, but I'm not sure.
This probably that this code should be made more generic
Danny Parker wrote:
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files?
Yes, to control the TOC. But they are harmless.
The crucial difference is that \maketitle comes
Here they are. My layout file is in the top post if you need that too.
Thanks for the help.
On Wed, Jun 24, 2009 at 10:42 AM, rgheck rgh...@bobjweil.com wrote:
Danny Parker wrote:
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
rgheck wrote:
Is there a place on the wiki where people can put modules they've
created for their own use that they think might be useful for others?
I've got a few of these myself.
There's a Layouts group, to which you can add pages listing and linking
to the layouts/modules you want to
Danny Parker wrote:
Here they are. My layout file is in the top post if you need that
too. Thanks for the help.
OK, the problem is that LyX outputs \maketitle as soon as you use a
layout that is not marked InTitle. Since you put \phmheader in ERT in
a Standard environment, that's not
Thanks again for the help. I added that to my layout but I'm still very new
to LyX (I had to look up what ERT, Evil Red Text, was) so I don't really
understand what you mean by use it instead of standard. Could you please
direct me to some reading or explain a little further.
Danny
On Wed, Jun
I am looking for an example of a latex or LyX document that used the
sciposter.cls document class.
If anyone has such an example, please email it to me or post it here.
Thanks,
Ehud Kaplan
Danny Parker wrote:
Thanks again for the help. I added that to my layout but I'm still
very new to LyX (I had to look up what ERT, Evil Red Text, was) so I
don't really understand what you mean by use it instead of
standard. Could you please direct me to some reading or explain a
little
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
On Wed, Jun 24, 2009 at 2:17 PM, rgheck rgh...@bobjweil.com
Matthias Bußjäger wrote:
YEAH, thanks!
If I make the LYX-Screen half-sized it only needs about 19% CPU and it's as
fast as on Linux - Realtime!
could you please report back one more thing - if you continually resize lyx
window to bigger and bigger size does cpu load also increases
Danny Parker wrote:
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
I guess it's a tex2lyx importation bug,
Daniel Joshua Stark wrote:
Dear All,
I was wondering if LyX can handle making posters. I've looked around some,
and I don't believe it can. However, I wanted to ask you all first before
giving up on using it to make one.
i'm just fighting the same problem. friend pointed me to baposter
Alex Fernandez wrote:
The forthcoming HTML output from LyX will therefore use png's initially and
shoot for MathML later. Note that the latter won't be as hard as writing a
LaTeX to MathML converter (though these do exist), since we already have a
parsed form of the LaTeX and can output
On Wed, Jun 24, 2009 at 11:02 PM, Pavel Sandasa...@lyx.org wrote:
Alex Fernandez wrote:
Once it is there it will be nice to have two options for HTML output.
Meanwhile eLyXer will use XHTML and CSS2 which can be rendered
acceptably on modern browsers.
yes this option would be good and i
Hey dudes,
i would like to plot a simple function like f(x)=3x^2. I know there
are 2 ways of doing that. The first is to generate an image with an
external tool like gnuplot and include that image in the document
(Which i don't want to do). I would rather use a latex package so the
plot will be
i would like to plot a simple function
I would try to use pstricks package for this.I have not used it recently
but I do recall that I generated the data points for my function and then used
pstricks code in ERT to include the datafile in my LyX doc.
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or directory
What happen?, help me, thank you,
Mauricio Fabian Duque Daza schreef:
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or
hi, all
I try to install metafile to EPS Converter, when I install it,
however, it will pop up one message invalid printer
and I go through it.
when I open one lyx file to output the PDF, it will pop up a message
metafile to EPS converter printer selected is not valid.
then lyx(1.6.3) crash
and
Phil schrieb:
i would like to plot a simple function
I would try to use pstricks package for this.
There also is a package called pgf, which includes tikz. Those two are
really powerful and do have very nice output (see
http://www.texample.net/tikz/examples/), but like pstricks, time
Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I would
like to get the same behavior as listings, i.e., keep line feed and
allow entering tabulation. Is it a way to define my style so that it
behaves that way?
I don't understand. What you want is
Uwe Stöhr wrote:
Philippe Grosjean schrieb:
I am defining a new style that should contain some program code. I
would like to get the same behavior as listings, i.e., keep line feed
and allow entering tabulation. Is it a way to define my style so that
it behaves that way?
I don't
On Jun 23, 2009, at 10:55 PM, BH wrote:
On Tue, Jun 23, 2009 at 5:12 PM, I wrote:
I am trying to install Songbird. I am following the instructions
on this
wiki page:
http://wiki.lyx.org/Layouts/Songbook#toc4...
Songbook is a LaTeX package, and so it belongs in your LaTeX tree
I
I am progressing... I have now defined a custom layout:
InsetLayout Schunk
LyxType custom
LabelString <<>>=...
LatexType none
Decorationminimalistic
Font
Family typewriter
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
You will need to redefine the various environments to use their own
Danny Parker wrote:
I still haven't been able to figure this out. As far as I can tell the
problem boils down to that MikTeX can use the .sty from the command line and
I can't get LyX to generate a DVI without errors. Any suggestions?
Try exporting the document to LaTeX and comparing to to
Philippe Grosjean wrote:
This solves my problem with respect of line feed. However, I cannot
tab/backtab in this environment. LyX says "command disabled" when I
try tab-insert or tab-delete commands.
How can I activate these commands in my layout, as it is in listings?
Without altering the
rgheck writes:
> Philippe Grosjean wrote:
>> This solves my problem with respect of line feed. However, I cannot
>> tab/backtab in this environment. LyX says "command disabled" when I
>> try tab-insert or tab-delete commands.
>>
>> How can I activate these commands in my
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already offered them up on the
I just did that and I noticed a few differences. LyX is adding the
following lines that are not in the LaTeX file and I'm not sure where they
are coming from.
\usepackage[T1]{fontenc}
\usepackage{babel}
The only other difference I can see is that LyX has
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files? Is there a way in LyX to edit the
LaTex Source directly? I'm including two files test.tex is the original
LaTeX that compiles fine and
Paul A. Rubin wrote:
Srinivas Nedunuri wrote:
currently Lyx numbers theorems, definitions, examples, claims, etc
sequentially using the same counter. How can i get it to use seperate
counters for (some specific subset of) each of these?
I have a set of modules to do this. I've already
Jean-Marc Lasgouttes wrote:
LFUN_TAB_INSERT currently
only works with listings. You might be able to redo the bindings so
that the tab key would insert a tab, perhaps via unicode-insert and
then the tab character, but I'm not sure.
This probably that this code should be made more generic
Danny Parker wrote:
Another difference is that LyX adds
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\makeatletter
\makeatother
Any idea why LyX is adding these files?
Yes, to control the TOC. But they are harmless.
The crucial difference is that \maketitle comes
Here they are. My layout file is in the top post if you need that too.
Thanks for the help.
On Wed, Jun 24, 2009 at 10:42 AM, rgheck wrote:
> Danny Parker wrote:
>
>> Another difference is that LyX adds
>>
>> \setcounter{secnumdepth}{3}
>>
>> \setcounter{tocdepth}{3}
>>
>>
rgheck wrote:
Is there a place on the wiki where people can put modules they've
created for their own use that they think might be useful for others?
I've got a few of these myself.
There's a Layouts group, to which you can add pages listing and linking
to the layouts/modules you want to
Danny Parker wrote:
Here they are. My layout file is in the top post if you need that
too. Thanks for the help.
OK, the problem is that LyX outputs \maketitle as soon as you use a
layout that is not marked "InTitle". Since you put \phmheader in ERT in
a Standard environment, that's not
Thanks again for the help. I added that to my layout but I'm still very new
to LyX (I had to look up what ERT, Evil Red Text, was) so I don't really
understand what you mean by "use it instead of standard". Could you please
direct me to some reading or explain a little further.
Danny
On Wed,
I am looking for an example of a latex or LyX document that used the
sciposter.cls document class.
If anyone has such an example, please email it to me or post it here.
Thanks,
Ehud Kaplan
Danny Parker wrote:
Thanks again for the help. I added that to my layout but I'm still
very new to LyX (I had to look up what ERT, Evil Red Text, was) so I
don't really understand what you mean by "use it instead of
standard". Could you please direct me to some reading or explain a
little
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
On Wed, Jun 24, 2009 at 2:17 PM, rgheck
Matthias Bußjäger wrote:
> YEAH, thanks!
>
> If I make the LYX-Screen half-sized it only needs about 19% CPU and it's as
> fast as on Linux -> Realtime!
could you please report back one more thing - if you continually resize lyx
window to bigger and bigger size does cpu load also increases
Danny Parker wrote:
Great! That fixed it. Thanks again for your help and patience. So I'm
slowly starting to understand what the problem was here. I guess what I'm
still unclear on is was this a user error or LyX bug since MikTex compiled
it fine.
I guess it's a tex2lyx importation bug,
Daniel Joshua Stark wrote:
> Dear All,
>
> I was wondering if LyX can handle making posters. I've looked around some,
> and I don't believe it can. However, I wanted to ask you all first before
> giving up on using it to make one.
i'm just fighting the same problem. friend pointed me to
Alex Fernandez wrote:
> > The forthcoming HTML output from LyX will therefore use png's initially and
> > shoot for MathML later. Note that the latter won't be as hard as writing a
> > LaTeX to MathML converter (though these do exist), since we already have a
> > parsed form of the LaTeX and can
On Wed, Jun 24, 2009 at 11:02 PM, Pavel Sanda wrote:
> Alex Fernandez wrote:
>> Once it is there it will be nice to have two options for HTML output.
>> Meanwhile eLyXer will use XHTML and CSS2 which can be rendered
>> acceptably on modern browsers.
>
> yes this option would be good
Hey dudes,
i would like to plot a simple function like f(x)=3x^2. I know there
are 2 ways of doing that. The first is to generate an image with an
external tool like gnuplot and include that image in the document
(Which i don't want to do). I would rather use a latex package so the
plot will be
>
> i would like to plot a simple function
I would try to use pstricks package for this.I have not used it recently
but I do recall that I generated the data points for my function and then used
pstricks code in ERT to include the datafile in my LyX doc.
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or directory
What happen?, help me, thank you,
Mauricio Fabian Duque Daza schreef:
My Slackware 12.2 with kde 3.5 and qt4-4.4.3-i486-1 don't work with
lyx-1.6.3-i486-1, at terminal after of lyx, result
lyx: symbol lookup error: lyx: undefined symbol: _Z13qFlagLocationPKc
too i do
ldd .lyx
but result
ldd: ./.lyx: No such file or
hi, all
I try to install "metafile to EPS Converter", when I install it,
however, it will pop up one message "invalid printer"
and I go through it.
when I open one lyx file to output the PDF, it will pop up a message
"metafile to EPS converter" "printer selected is not valid".
then lyx(1.6.3)
Phil schrieb:
i would like to plot a simple function
I would try to use pstricks package for this.
There also is a package called pgf, which includes tikz. Those two are
really powerful and do have very nice output (see
http://www.texample.net/tikz/examples/), but like pstricks, time
99 matches
Mail list logo