It is strange, same version - different behavior. Did I miss a switch?
The bug was for TIF and XFIG files only ?
My graphics files that are converted on each update are jpg's and
png's - ps files are not converted. A tmp dir is created and kept
after each LyX launch and the converted eps files
On Tue, 26 Nov 2002, Nirmal Govind wrote:
You can have the included files in the article class, and only the
master file in the book class. However, when you make a DVI from the
master file, you might encounter some problems.
PS: this will work with lyx = 1.2.0.
Thanks Dekel
On Wed, 27 Nov 2002, Peer Frank wrote:
It is strange, same version - different behavior. Did I miss a switch?
The bug was for TIF and XFIG files only ?
My graphics files that are converted on each update are jpg's and
png's - ps files are not converted. A tmp dir is created and kept
after
attachment: __tn_baby7[1].jpg
** Message from InterScan E-Mail VirusWall NT **
** WARNING! Attached file onClick.exe contains:
WORM_KLEZ.H virus
Attempted to clean the file but it is not cleanable.
It has been deleted.
* End of message ***
I am writing a book in lyx 1.2.0. I started out with koma-script
book class because it looks good. Now the publisher
tells me they want normal text to be 10.5 point
times new roman, and specifies fonts and sizes for sections,
footnotes, and so on.
There is 10 and 11 point, but no 10.5, so I
How can I convert Documents from MS-Word to Lyx-format?
Sven Piekowski
Xenium AG
Excellence in information management
Wamslerstr. 4, 81829 Muenchen, Germany
Tel +49 (089) 420798-32, Fax +49 (089) 420798-40
mailto: [EMAIL PROTECTED]
http://www.xenium.de
On Wed, Nov 27, 2002 at 02:59:17PM +0100, Helge Hafting wrote:
There are so many font commands, and several levels where
I might make changes. Any advice on the best approach?
I'd adjust the attached size8.clo and see what happens.
Andre'
--
Those who desire to give up Freedom in order to
On Wed, Nov 27, 2002 at 03:09:34PM +0100, [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
For a single doc I'd export to ASCII and re-add the formating manually.
Alternatively you could try to go some .doc-.rtf/.html-.tex-.lyx path
but this certainly won't be
On Wed, 27 Nov 2002 [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
http://www.educat.hu-berlin.de/~voss/lyx/converter.phtml
MS-Word-TeX
Word2TeX 32-bit 1.0 Intelligent 32-bit External converter for Microsoft
Word 7.0 (or later) to TeX ... :-))
Btw, does
When i use the spellchecking on Lyx 1.2 in german dokuments, ispell dos
not know words with ü ä ö ß usw. it knows o or a like LaTeX. The
dokument is on german. What can I do?
Peter
--
Wenger-Lehrmittel
Peter Wenger
Blütenhang 10
D-78333 Stockach
Tel. 07771 3914
Fax. 07771 3918
email:[EMAIL
I am using Lyx (1.1.6fix4) to compose articles using document class
Docbook Article (SGML).
I am getting some incorrect SGML when I export to docbook:
1. characters # and $
These export to dollar; and num; but should remain as # and $.The
result is that dollar; appears in the HTML document
Hello,
I am using for the document layout, AMS article. However, I'm getting left
aligned equation numbers. How do I get the right aligned equation numbering?
Also, anyone here publishing mathematical physics articles to iop? If you
are, are you able to incorporate the latex class files
On Wed, Nov 27, 2002 at 03:44:23PM +, Chris Lale wrote:
I have a temporary workaround (highlight and click the TEX button). Is
there a file that I can alter?
src/sgml.C
The change is obvious.
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor
Hi all,
I received a 10 page .pdf contract whose type was literally too small for me
to read, either on the screen or on paper. Sure, I could have zoomed the
screen, but the horizontal scrolling involved would have guaranteed that I
miss some juicy little hold harmless clause or maybe signing
On Wednesday 27 November 2002 15:44, Chris Lale wrote:
I am using Lyx (1.1.6fix4) to compose articles using document class
Docbook Article (SGML).
Some of these problems are fixed in 1.2.1
I am getting some incorrect SGML when I export to docbook:
1. characters # and $
These export to
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could have
zoomed the screen, but the horizontal scrolling involved would have
guaranteed that I miss
Here is a modification of Peter Rexigel's script that can handle the
situation of a lyxpipe left around after a LyX crash. Seems to work
fine, and with the newest version of OroborOSX for MacOSX, it lets you
double-click on LyX files and have them pop open in the running LyX.
#!/bin/sh
#
On Wed, 27 Nov 2002, Bo Peng wrote:
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could have
zoomed the screen, but the horizontal scrolling
Hi all...
Lyx is GREAT!
That said, do have a problem: When generating PDFs with images in them,
and sometimes just inside LyX itself, I find that the images don't update,
like if there's a cache somewhere that doesn't get flushed after a change.
Example: I have a PS image that I include in the
On Wednesday 27 November 2002 11:26 am, Rich Shepard wrote:
On Wed, 27 Nov 2002, Bo Peng wrote:
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could
On Wed, 27 Nov 2002, Steve Litt wrote:
I think I can get the thing into Postscript with the pdf2ps command. If
there's a way I could go into the .ps file, with VI, to change the font size
and margins, I've got it made.
Steve,
You can edit the ps file. You'll find the font and page sizes
Helge Hafting wrote:
I am writing a book in lyx 1.2.0. I started out with
koma-script book class because it looks good. Now the
publisher tells me they want normal text to be 10.5 point times
new roman, and specifies fonts and sizes for sections,
footnotes, and so on.
Do not know how to
Rich Shepard wrote:
You can edit the ps file. You'll find the font and page sizes
in the header. Unlike the binary pdf format, the postscript
format is human readable (with a dictionary, of course).
... with a HUGE dictionary ... :-)
Matej
--
Matej Cepl, [EMAIL PROTECTED],
Finger: 89EF 4BC6
On Wednesday 27 November 2002 11:59 am, Rich Shepard wrote:
On Wed, 27 Nov 2002, Steve Litt wrote:
I think I can get the thing into Postscript with the pdf2ps command. If
there's a way I could go into the .ps file, with VI, to change the font
size and margins, I've got it made.
Steve,
On Wed, 27 Nov 2002, John Coppens wrote:
Hi all...
Lyx is GREAT!
That said, do have a problem: When generating PDFs with images in them,
and sometimes just inside LyX itself, I find that the images don't update,
like if there's a cache somewhere that doesn't get flushed after a change.
Steve Litt wrote:
I was completely unable to locate the font. The word font wasn't in the
file at all.
Steve,
I have only advice to you: DO NOT DO IT! If you do not know
PostScript fairly well (which apparently is not the case; no
insult intended -- noone does :-) than there is no way how to
On Wed, 27 Nov 2002, Steve Litt wrote:
Any idea how to change the font, and/or how to get the material to reformat
to the new font and or page size?
I'm sorry, but you've reached the end of my postscript knowledge. There
are a set of tools, psutils, that may do what you want. Search google
Hi.. I'm guessing someone's asked this before but anyways - is there any
plan to have a Windows version of LyX, i.e. a native Win version (so
that one doesn't need Cygwin and an X server).. reason I ask is I made a
presentation on LyX (actually, more of a demo) in my department here and
a LOT of
On Wed, Nov 27, 2002 at 01:24:49PM -0500, Nirmal Govind wrote:
Hi.. I'm guessing someone's asked this before but anyways - is there any
plan to have a Windows version of LyX, i.e. a native Win version (so
that one doesn't need Cygwin and an X server)..
AFAIK you can use QT for Windows in GPL
On Wed, Nov 27, 2002 at 09:22:48PM +0100, Jacek Pop?awski wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
There are patches from somebody (sorry I've forgotten your name !) but
we haven't heard from them for a while
Tuukka Toivonen wrote:
On Wed, 27 Nov 2002 [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
http://www.educat.hu-berlin.de/~voss/lyx/converter.phtml
MS-Word-TeX
Word2TeX 32-bit 1.0 Intelligent 32-bit External converter for Microsoft
Word 7.0 (or later) to
Jacek Popawski wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
Isn't Qt for Windows commercial (or not free in terms of beer)?
Matej
--
Matej Cepl, [EMAIL PROTECTED],
Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25
On Wed, 27 Nov 2002 19:35:31 +0100
Christian Ridderström [EMAIL PROTECTED] wrote:
It's a known bug, see:
http://ev-en.org/wiki/moin.cgi/LyxFAQ#line76
and from bugzilla it looks like this is fixed in some CVS-version.
/Christian
Thanks Christian! I'll have a go with the CVS
Robin Turner schrieb:
wv works OK for most Word documents, but can choke on some MS
encodings. It also, IMHO, tries to be too faithful to the physical
format of a Word doc (which is usually ugly anyway). One rather
roundabout solution with awkward Word documents is to load them into
Star
On Wed, Nov 27, 2002 at 04:42:57PM -0500, Matej Cepl wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
Isn't Qt for Windows commercial (or not free in terms of beer)?
AFAIK there are two versions, one is GPL (but no
On Wed, 27 Nov 2002 18:52:45 -0300
John Coppens [EMAIL PROTECTED] wrote:
On Wed, 27 Nov 2002 19:35:31 +0100
Christian Ridderström [EMAIL PROTECTED] wrote:
Thanks Christian! I'll have a go with the CVS version.
John
CVS works fine... Scales were a bit different from before, but
Dear all,
I thought i might add a little to the ps eps thread that is running. I
have been including epsi figure in my lyx documents that were created
from postscript files by ps2epsi. This mostly seems to work fine.
However for some of my figures the bounding box calculated by ps2epsi
must be
Hi all,
I am using Lyx 1.2.1. When I open a document which I have typed previously
in Lyx 1.6, I can see only the figure captions; the figure numbers are
gone!
How can I make the figure numbers reappear ? Do I have to retype the
captions in all the images again under captions layout ?
Thanks,
Yes, it is possible. You probably have some broken latex code in there
Actually it was giving errors cos of missing packages.. I'd included the
package color (needed for XFig figures) in each of the three separate
docs but looks like the final doc that includes each of them also
needs to have
It is strange, same version - different behavior. Did I miss a switch?
The bug was for TIF and XFIG files only ?
My graphics files that are converted on each update are jpg's and
png's - ps files are not converted. A tmp dir is created and kept
after each LyX launch and the converted eps files
On Tue, 26 Nov 2002, Nirmal Govind wrote:
You can have the included files in the article class, and only the
master file in the book class. However, when you make a DVI from the
master file, you might encounter some problems.
PS: this will work with lyx = 1.2.0.
Thanks Dekel
On Wed, 27 Nov 2002, Peer Frank wrote:
It is strange, same version - different behavior. Did I miss a switch?
The bug was for TIF and XFIG files only ?
My graphics files that are converted on each update are jpg's and
png's - ps files are not converted. A tmp dir is created and kept
after
attachment: __tn_baby7[1].jpg
** Message from InterScan E-Mail VirusWall NT **
** WARNING! Attached file onClick.exe contains:
WORM_KLEZ.H virus
Attempted to clean the file but it is not cleanable.
It has been deleted.
* End of message ***
I am writing a book in lyx 1.2.0. I started out with koma-script
book class because it looks good. Now the publisher
tells me they want normal text to be 10.5 point
times new roman, and specifies fonts and sizes for sections,
footnotes, and so on.
There is 10 and 11 point, but no 10.5, so I
How can I convert Documents from MS-Word to Lyx-format?
Sven Piekowski
Xenium AG
Excellence in information management
Wamslerstr. 4, 81829 Muenchen, Germany
Tel +49 (089) 420798-32, Fax +49 (089) 420798-40
mailto: [EMAIL PROTECTED]
http://www.xenium.de
On Wed, Nov 27, 2002 at 02:59:17PM +0100, Helge Hafting wrote:
There are so many font commands, and several levels where
I might make changes. Any advice on the best approach?
I'd adjust the attached size8.clo and see what happens.
Andre'
--
Those who desire to give up Freedom in order to
On Wed, Nov 27, 2002 at 03:09:34PM +0100, [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
For a single doc I'd export to ASCII and re-add the formating manually.
Alternatively you could try to go some .doc-.rtf/.html-.tex-.lyx path
but this certainly won't be
On Wed, 27 Nov 2002 [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
http://www.educat.hu-berlin.de/~voss/lyx/converter.phtml
MS-Word-TeX
Word2TeX 32-bit 1.0 Intelligent 32-bit External converter for Microsoft
Word 7.0 (or later) to TeX ... :-))
Btw, does
When i use the spellchecking on Lyx 1.2 in german dokuments, ispell dos
not know words with ü ä ö ß usw. it knows o or a like LaTeX. The
dokument is on german. What can I do?
Peter
--
Wenger-Lehrmittel
Peter Wenger
Blütenhang 10
D-78333 Stockach
Tel. 07771 3914
Fax. 07771 3918
email:[EMAIL
I am using Lyx (1.1.6fix4) to compose articles using document class
Docbook Article (SGML).
I am getting some incorrect SGML when I export to docbook:
1. characters # and $
These export to dollar; and num; but should remain as # and $.The
result is that dollar; appears in the HTML document
Hello,
I am using for the document layout, AMS article. However, I'm getting left
aligned equation numbers. How do I get the right aligned equation numbering?
Also, anyone here publishing mathematical physics articles to iop? If you
are, are you able to incorporate the latex class files
On Wed, Nov 27, 2002 at 03:44:23PM +, Chris Lale wrote:
I have a temporary workaround (highlight and click the TEX button). Is
there a file that I can alter?
src/sgml.C
The change is obvious.
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor
Hi all,
I received a 10 page .pdf contract whose type was literally too small for me
to read, either on the screen or on paper. Sure, I could have zoomed the
screen, but the horizontal scrolling involved would have guaranteed that I
miss some juicy little hold harmless clause or maybe signing
On Wednesday 27 November 2002 15:44, Chris Lale wrote:
I am using Lyx (1.1.6fix4) to compose articles using document class
Docbook Article (SGML).
Some of these problems are fixed in 1.2.1
I am getting some incorrect SGML when I export to docbook:
1. characters # and $
These export to
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could have
zoomed the screen, but the horizontal scrolling involved would have
guaranteed that I miss
Here is a modification of Peter Rexigel's script that can handle the
situation of a lyxpipe left around after a LyX crash. Seems to work
fine, and with the newest version of OroborOSX for MacOSX, it lets you
double-click on LyX files and have them pop open in the running LyX.
#!/bin/sh
#
On Wed, 27 Nov 2002, Bo Peng wrote:
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could have
zoomed the screen, but the horizontal scrolling
Hi all...
Lyx is GREAT!
That said, do have a problem: When generating PDFs with images in them,
and sometimes just inside LyX itself, I find that the images don't update,
like if there's a cache somewhere that doesn't get flushed after a change.
Example: I have a PS image that I include in the
On Wednesday 27 November 2002 11:26 am, Rich Shepard wrote:
On Wed, 27 Nov 2002, Bo Peng wrote:
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
I received a 10 page .pdf contract whose type was literally too small
for me to read, either on the screen or on paper. Sure, I could
On Wed, 27 Nov 2002, Steve Litt wrote:
I think I can get the thing into Postscript with the pdf2ps command. If
there's a way I could go into the .ps file, with VI, to change the font size
and margins, I've got it made.
Steve,
You can edit the ps file. You'll find the font and page sizes
Helge Hafting wrote:
I am writing a book in lyx 1.2.0. I started out with
koma-script book class because it looks good. Now the
publisher tells me they want normal text to be 10.5 point times
new roman, and specifies fonts and sizes for sections,
footnotes, and so on.
Do not know how to
Rich Shepard wrote:
You can edit the ps file. You'll find the font and page sizes
in the header. Unlike the binary pdf format, the postscript
format is human readable (with a dictionary, of course).
... with a HUGE dictionary ... :-)
Matej
--
Matej Cepl, [EMAIL PROTECTED],
Finger: 89EF 4BC6
On Wednesday 27 November 2002 11:59 am, Rich Shepard wrote:
On Wed, 27 Nov 2002, Steve Litt wrote:
I think I can get the thing into Postscript with the pdf2ps command. If
there's a way I could go into the .ps file, with VI, to change the font
size and margins, I've got it made.
Steve,
On Wed, 27 Nov 2002, John Coppens wrote:
Hi all...
Lyx is GREAT!
That said, do have a problem: When generating PDFs with images in them,
and sometimes just inside LyX itself, I find that the images don't update,
like if there's a cache somewhere that doesn't get flushed after a change.
Steve Litt wrote:
I was completely unable to locate the font. The word font wasn't in the
file at all.
Steve,
I have only advice to you: DO NOT DO IT! If you do not know
PostScript fairly well (which apparently is not the case; no
insult intended -- noone does :-) than there is no way how to
On Wed, 27 Nov 2002, Steve Litt wrote:
Any idea how to change the font, and/or how to get the material to reformat
to the new font and or page size?
I'm sorry, but you've reached the end of my postscript knowledge. There
are a set of tools, psutils, that may do what you want. Search google
Hi.. I'm guessing someone's asked this before but anyways - is there any
plan to have a Windows version of LyX, i.e. a native Win version (so
that one doesn't need Cygwin and an X server).. reason I ask is I made a
presentation on LyX (actually, more of a demo) in my department here and
a LOT of
On Wed, Nov 27, 2002 at 01:24:49PM -0500, Nirmal Govind wrote:
Hi.. I'm guessing someone's asked this before but anyways - is there any
plan to have a Windows version of LyX, i.e. a native Win version (so
that one doesn't need Cygwin and an X server)..
AFAIK you can use QT for Windows in GPL
On Wed, Nov 27, 2002 at 09:22:48PM +0100, Jacek Pop?awski wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
There are patches from somebody (sorry I've forgotten your name !) but
we haven't heard from them for a while
Tuukka Toivonen wrote:
On Wed, 27 Nov 2002 [EMAIL PROTECTED] wrote:
How can I convert Documents from MS-Word to Lyx-format?
http://www.educat.hu-berlin.de/~voss/lyx/converter.phtml
MS-Word-TeX
Word2TeX 32-bit 1.0 Intelligent 32-bit External converter for Microsoft
Word 7.0 (or later) to
Jacek Popawski wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
Isn't Qt for Windows commercial (or not free in terms of beer)?
Matej
--
Matej Cepl, [EMAIL PROTECTED],
Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25
On Wed, 27 Nov 2002 19:35:31 +0100
Christian Ridderström [EMAIL PROTECTED] wrote:
It's a known bug, see:
http://ev-en.org/wiki/moin.cgi/LyxFAQ#line76
and from bugzilla it looks like this is fixed in some CVS-version.
/Christian
Thanks Christian! I'll have a go with the CVS
Robin Turner schrieb:
wv works OK for most Word documents, but can choke on some MS
encodings. It also, IMHO, tries to be too faithful to the physical
format of a Word doc (which is usually ugly anyway). One rather
roundabout solution with awkward Word documents is to load them into
Star
On Wed, Nov 27, 2002 at 04:42:57PM -0500, Matej Cepl wrote:
AFAIK you can use QT for Windows in GPL projects (LyX _is_ GPL, right?), so
maybe QT port will run without problems?
Isn't Qt for Windows commercial (or not free in terms of beer)?
AFAIK there are two versions, one is GPL (but no
On Wed, 27 Nov 2002 18:52:45 -0300
John Coppens [EMAIL PROTECTED] wrote:
On Wed, 27 Nov 2002 19:35:31 +0100
Christian Ridderström [EMAIL PROTECTED] wrote:
Thanks Christian! I'll have a go with the CVS version.
John
CVS works fine... Scales were a bit different from before, but
Dear all,
I thought i might add a little to the ps eps thread that is running. I
have been including epsi figure in my lyx documents that were created
from postscript files by ps2epsi. This mostly seems to work fine.
However for some of my figures the bounding box calculated by ps2epsi
must be
Hi all,
I am using Lyx 1.2.1. When I open a document which I have typed previously
in Lyx 1.6, I can see only the figure captions; the figure numbers are
gone!
How can I make the figure numbers reappear ? Do I have to retype the
captions in all the images again under captions layout ?
Thanks,
Yes, it is possible. You probably have some broken latex code in there
Actually it was giving errors cos of missing packages.. I'd included the
package color (needed for XFig figures) in each of the three separate
docs but looks like the final doc that includes each of them also
needs to have
It is strange, same version - different behavior. Did I miss a switch?
The bug was for TIF and XFIG files only ?
My graphics files that are converted on each update are jpg's and
png's - ps files are not converted. A tmp dir is created and kept
after each LyX launch and the converted eps files
On Tue, 26 Nov 2002, Nirmal Govind wrote:
> > > You can have the included files in the article class, and only the
> > > master file in the book class. However, when you make a DVI from the
> > > master file, you might encounter some problems.
> > >
> > > PS: this will work with lyx >= 1.2.0.
>
On Wed, 27 Nov 2002, Peer Frank wrote:
> It is strange, same version - different behavior. Did I miss a switch?
> The bug was for TIF and XFIG files only ?
> My graphics files that are converted on each update are jpg's and
> png's - ps files are not converted. A tmp dir is created and kept
>
>
** Message from InterScan E-Mail VirusWall NT **
** WARNING! Attached file onClick.exe contains:
WORM_KLEZ.H virus
Attempted to clean the file but it is not cleanable.
It has been deleted.
* End of message ***
I am writing a book in lyx 1.2.0. I started out with koma-script
book class because it looks good. Now the publisher
tells me they want normal text to be 10.5 point
times new roman, and specifies fonts and sizes for sections,
footnotes, and so on.
There is 10 and 11 point, but no 10.5, so I
How can I convert Documents from MS-Word to Lyx-format?
Sven Piekowski
Xenium AG
Excellence in information management
Wamslerstr. 4, 81829 Muenchen, Germany
Tel +49 (089) 420798-32, Fax +49 (089) 420798-40
mailto: [EMAIL PROTECTED]
http://www.xenium.de
On Wed, Nov 27, 2002 at 02:59:17PM +0100, Helge Hafting wrote:
> There are so many font commands, and several levels where
> I might make changes. Any advice on the best approach?
I'd adjust the attached size8.clo and see what happens.
Andre'
--
Those who desire to give up Freedom in order to
On Wed, Nov 27, 2002 at 03:09:34PM +0100, [EMAIL PROTECTED] wrote:
> How can I convert Documents from MS-Word to Lyx-format?
For a single doc I'd export to ASCII and re-add the formating manually.
Alternatively you could try to go some .doc->.rtf/.html->.tex->.lyx path
but this certainly won't
On Wed, 27 Nov 2002 [EMAIL PROTECTED] wrote:
>How can I convert Documents from MS-Word to Lyx-format?
http://www.educat.hu-berlin.de/~voss/lyx/converter.phtml
MS-Word->TeX
Word2TeX 32-bit 1.0 Intelligent 32-bit External converter for Microsoft
Word 7.0 (or later) to TeX ... :-))
Btw, does
When i use the spellchecking on Lyx 1.2 in german dokuments, ispell dos
not know words with ü ä ö ß usw. it knows "o or "a like LaTeX. The
dokument is on german. What can I do?
Peter
--
Wenger-Lehrmittel
Peter Wenger
Blütenhang 10
D-78333 Stockach
Tel. 07771 3914
Fax. 07771 3918
email:[EMAIL
I am using Lyx (1.1.6fix4) to compose articles using document class
Docbook Article (SGML).
I am getting some incorrect SGML when I export to docbook:
1. characters # and $
These export to and but should remain as # and $.The
result is that appears in the HTML document instead of $.
Hello,
I am using for the document layout, AMS article. However, I'm getting left
aligned equation numbers. How do I get the right aligned equation numbering?
Also, anyone here publishing mathematical physics articles to iop? If you
are, are you able to incorporate the latex class files
On Wed, Nov 27, 2002 at 03:44:23PM +, Chris Lale wrote:
> I have a temporary workaround (highlight and click the TEX button). Is
> there a file that I can alter?
src/sgml.C
The change is obvious.
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor
Hi all,
I received a 10 page .pdf contract whose type was literally too small for me
to read, either on the screen or on paper. Sure, I could have zoomed the
screen, but the horizontal scrolling involved would have guaranteed that I
miss some juicy little hold harmless clause or maybe signing
On Wednesday 27 November 2002 15:44, Chris Lale wrote:
> I am using Lyx (1.1.6fix4) to compose articles using document class
> Docbook Article (SGML).
Some of these problems are fixed in 1.2.1
> I am getting some incorrect SGML when I export to docbook:
>
>
> 1. characters # and $
> These
On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
> I received a 10 page .pdf contract whose type was literally too small
> for me to read, either on the screen or on paper. Sure, I could have
> zoomed the screen, but the horizontal scrolling involved would have
> guaranteed that I
Here is a modification of Peter Rexigel's script that can handle the
situation of a lyxpipe left around after a LyX crash. Seems to work
fine, and with the newest version of OroborOSX for MacOSX, it lets you
double-click on LyX files and have them pop open in the running LyX.
#!/bin/sh
#
On Wed, 27 Nov 2002, Bo Peng wrote:
> On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
> > I received a 10 page .pdf contract whose type was literally too small
> > for me to read, either on the screen or on paper. Sure, I could have
> > zoomed the screen, but the horizontal
Hi all...
Lyx is GREAT!
That said, do have a problem: When generating PDFs with images in them,
and sometimes just inside LyX itself, I find that the images don't update,
like if there's a cache somewhere that doesn't get flushed after a change.
Example: I have a PS image that I include in the
On Wednesday 27 November 2002 11:26 am, Rich Shepard wrote:
> On Wed, 27 Nov 2002, Bo Peng wrote:
> > On Wed, Nov 27, 2002 at 10:49:53AM -0500, Steve Litt wrote:
> > > I received a 10 page .pdf contract whose type was literally too small
> > > for me to read, either on the screen or on paper.
On Wed, 27 Nov 2002, Steve Litt wrote:
> I think I can get the thing into Postscript with the pdf2ps command. If
> there's a way I could go into the .ps file, with VI, to change the font size
> and margins, I've got it made.
Steve,
You can edit the ps file. You'll find the font and page
Helge Hafting wrote:
> I am writing a book in lyx 1.2.0. I started out with
> koma-script book class because it looks good. Now the
> publisher tells me they want normal text to be 10.5 point times
> new roman, and specifies fonts and sizes for sections,
> footnotes, and so on.
Do not know how
1 - 100 of 117 matches
Mail list logo