Solution: Section numbers don't reset
Hi all, I'll describe a set of symptoms, and then I'll tell how I fixed it... SYMPTOM: Section numbers did not reset after each chapter. Each section had just the section number not preceded by the chapter number and a dot. SITUATION: I was using a local layout, derived from standard "Book" layout. SOLUTION: I added a line containing "Input book.layout". HOW I FOUND IT: After a half hour of futzing around, in preparation to ask you guys, I made a Minimum Working Example by copying my layout file to test.layout, and starting with a new document using test.layout, I was able to toggle the symptom by switching between Book and my layout. I started removing stuff from my layout file until there was nothing there, and the symptom persisted. So I looked at my other layout files and saw that they contained "Input book.layout", so I inserted that and fixed the symptom. So then I went to the original layout file and document, inserted "Input book.layout" into the layout file, re-compiled the document, and bang, the symptom was gone. SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Hide section numbers in outline?
On Wed, Jan 24, 2018 at 03:46:25PM +, Klaus-Dieter Bauer wrote: > Hello! > > Is it possible to hide the section numbers in the outline pane? > > Most of the time I am using two documents side-by-side (*View → Split View > into Left and Right Half*), which means that I need to keep sidepanes > narrow. For the outline pane however, the combination of strong indentation > and section numbers result in barely readable section titles. > ___ > |Outline [] X | > | ___ | > | |Table of Contents v| | > | ‾‾‾ | > | ___ | > | | > Chapter 5 TODO Unders...| | > | | v Chapter 6 Definition ...| | > | | v 6.1 Maxwell Equatio...| | > | |X 0.0.1 Electrom...| | > | |6.1.1 Maxwell eq...| | > | |6.1.2 Gauge free...| | > | |6.1.3 Complicati...| | > | |6.1.4 Solutions ...| | _ _ > | | 6.1.4.1 Scalar...| || || | > | | 6.1.4.2 Electr...| | -+ | || | > | | 6.1.4.3 Electr...| | | |_||_| > | | 6.1.4.4 Electr...| | -+ _ _ > | | 6.1.4.5 Multip...| ||_||_| > | |6.1.5 Near-field...| | > | |6.1.6 TODO Macro...| | > | | | | > | |___| | > | . . . . . [ ]Sort | > | [#]--+---+---+---+ [ ]Keep | > | ' ' ' ' '| > |___| > (or see https://postimg.org/image/i1yngguv7/ ) > > I therefore need some way to make the outline pane compact, without > truncating titles that much, e.g. > >1. hiding the numbers (which I really don't need here) >2. change the font-size in the outline pane > > Is theresomething I can do to achieve this? Klaus, I think this is a good idea. I suggest you make a ticket on trac (and select component "outliner"), otherwise it will be forgotten. Scott signature.asc Description: PGP signature
Re: Hide section numbers in outline?
On 01/24/2018 10:46 AM, Klaus-Dieter Bauer wrote: Hello! Is it possible to hide the section numbers in the outline pane? Most of the time I am using two documents side-by-side (/View → Split View into Left and Right Half/), which means that I need to keep sidepanes narrow. For the outline pane however, the combination of strong indentation and section numbers result in barely readable section titles. ___ |Outline [] X | | ___ | | |Table of Contents v| | | ‾‾‾ | | ___ | | | > Chapter 5 TODO Unders...| | | | v Chapter 6 Definition ...| | | | v 6.1 Maxwell Equatio...| | | | X 0.0.1 Electrom...| | | | 6.1.1 Maxwell eq...| | | | 6.1.2 Gauge free...| | | | 6.1.3 Complicati...| | | | 6.1.4 Solutions ...| | _ _ | | 6.1.4.1 Scalar...| | | || | | | 6.1.4.2 Electr...| | -+ | || | | | 6.1.4.3 Electr...| | | |_||_| | | 6.1.4.4 Electr...| | -+ _ _ | | 6.1.4.5 Multip...| | |_||_| | | 6.1.5 Near-field...| | | | 6.1.6 TODO Macro...| | | | | | | |___| | | . . . . . [ ]Sort | | [#]--+---+---+---+ [ ]Keep | | ' ' ' ' ' | |___| (or see https://postimg.org/image/i1yngguv7/ <https://postimg.org/image/i1yngguv7/> ) I therefore need some way to make the outline pane compact, without truncating titles that much, e.g. 1. hiding the numbers (which I really don't need here) 2. change the font-size in the outline pane Is theresomething I can do to achieve this? - Klaus What about undocking the outline pane and moving it up above the buffer windows? It would reduce the height of the buffers a bit, and you probably would want to limit the height of the outline to a few lines, but at least you would have the full width of the outline visible. Paul
Hide section numbers in outline?
Hello! Is it possible to hide the section numbers in the outline pane? Most of the time I am using two documents side-by-side (*View → Split View into Left and Right Half*), which means that I need to keep sidepanes narrow. For the outline pane however, the combination of strong indentation and section numbers result in barely readable section titles. ___ |Outline [] X | | ___ | | |Table of Contents v| | | ‾‾‾ | | ___ | | | > Chapter 5 TODO Unders...| | | | v Chapter 6 Definition ...| | | | v 6.1 Maxwell Equatio...| | | |X 0.0.1 Electrom...| | | |6.1.1 Maxwell eq...| | | |6.1.2 Gauge free...| | | |6.1.3 Complicati...| | | |6.1.4 Solutions ...| | _ _ | | 6.1.4.1 Scalar...| || || | | | 6.1.4.2 Electr...| | -+ | || | | | 6.1.4.3 Electr...| | | |_||_| | | 6.1.4.4 Electr...| | -+ _ _ | | 6.1.4.5 Multip...| ||_||_| | |6.1.5 Near-field...| | | |6.1.6 TODO Macro...| | | | | | | |___| | | . . . . . [ ]Sort | | [#]--+---+---+---+ [ ]Keep | | ' ' ' ' '| |___| (or see https://postimg.org/image/i1yngguv7/ ) I therefore need some way to make the outline pane compact, without truncating titles that much, e.g. 1. hiding the numbers (which I really don't need here) 2. change the font-size in the outline pane Is theresomething I can do to achieve this? - Klaus
My LyX section numbers don't reset in new chapters
Hi all, I'm asking this here in case anyone can casually tell me something to try. Otherwise I'll need to carve my file up like a Christmas turkey to find the root cause. Anyway, in the LyX environment, but not in the PDF or the DVI, section numbers don't reset after chapter changes. So in my book, the first section header of chapter 25 is numbered 225, and the first subsection of its third section is 227.1. Note that the chapter numbers don't show up in the *LyX Environment* rendering at all. So chapter 25's first section isn't numbered 25.1, it's numbered 225, and the last section of chapter 24 is numbered 224. If anyone's seen this symptom before and knows of a possible fix, please let me know. Otherwise, I'll just keep cutting this thing down until I have a minimum example, and troubleshoot it from there. Thanks, SteveT Steve Litt* http://www.troubleshooters.com/ Troubleshooting Training * Human Performance
Re: My LyX section numbers don't reset in new chapters
On Fri, Aug 9, 2013 at 8:55 PM, Steve Litt sl...@troubleshooters.comwrote: Hi all, I'm asking this here in case anyone can casually tell me something to try. Otherwise I'll need to carve my file up like a Christmas turkey to find the root cause. Anyway, in the LyX environment, but not in the PDF or the DVI, section numbers don't reset after chapter changes. So in my book, the first section header of chapter 25 is numbered 225, and the first subsection of its third section is 227.1. Note that the chapter numbers don't show up in the *LyX Environment* rendering at all. So chapter 25's first section isn't numbered 25.1, it's numbered 225, and the last section of chapter 24 is numbered 224. If anyone's seen this symptom before and knows of a possible fix, please let me know. Otherwise, I'll just keep cutting this thing down until I have a minimum example, and troubleshoot it from there. It sounds like a layout issue. Which class/layout are you using? S. -- __ Stefano Franchi Associate Research Professor Department of Hispanic StudiesPh: +1 (979) 845-2125 Texas AM University Fax: +1 (979) 845-6421 College Station, Texas, USA stef...@tamu.edu http://stefano.cleinias.org
My LyX section numbers don't reset in new chapters
Hi all, I'm asking this here in case anyone can casually tell me something to try. Otherwise I'll need to carve my file up like a Christmas turkey to find the root cause. Anyway, in the LyX environment, but not in the PDF or the DVI, section numbers don't reset after chapter changes. So in my book, the first section header of chapter 25 is numbered 225, and the first subsection of its third section is 227.1. Note that the chapter numbers don't show up in the *LyX Environment* rendering at all. So chapter 25's first section isn't numbered 25.1, it's numbered 225, and the last section of chapter 24 is numbered 224. If anyone's seen this symptom before and knows of a possible fix, please let me know. Otherwise, I'll just keep cutting this thing down until I have a minimum example, and troubleshoot it from there. Thanks, SteveT Steve Litt* http://www.troubleshooters.com/ Troubleshooting Training * Human Performance
Re: My LyX section numbers don't reset in new chapters
On Fri, Aug 9, 2013 at 8:55 PM, Steve Litt sl...@troubleshooters.comwrote: Hi all, I'm asking this here in case anyone can casually tell me something to try. Otherwise I'll need to carve my file up like a Christmas turkey to find the root cause. Anyway, in the LyX environment, but not in the PDF or the DVI, section numbers don't reset after chapter changes. So in my book, the first section header of chapter 25 is numbered 225, and the first subsection of its third section is 227.1. Note that the chapter numbers don't show up in the *LyX Environment* rendering at all. So chapter 25's first section isn't numbered 25.1, it's numbered 225, and the last section of chapter 24 is numbered 224. If anyone's seen this symptom before and knows of a possible fix, please let me know. Otherwise, I'll just keep cutting this thing down until I have a minimum example, and troubleshoot it from there. It sounds like a layout issue. Which class/layout are you using? S. -- __ Stefano Franchi Associate Research Professor Department of Hispanic StudiesPh: +1 (979) 845-2125 Texas AM University Fax: +1 (979) 845-6421 College Station, Texas, USA stef...@tamu.edu http://stefano.cleinias.org
My LyX section numbers don't reset in new chapters
Hi all, I'm asking this here in case anyone can casually tell me something to try. Otherwise I'll need to carve my file up like a Christmas turkey to find the root cause. Anyway, in the LyX environment, but not in the PDF or the DVI, section numbers don't reset after chapter changes. So in my book, the first section header of chapter 25 is numbered 225, and the first subsection of its third section is 227.1. Note that the chapter numbers don't show up in the *LyX Environment* rendering at all. So chapter 25's first section isn't numbered "25.1", it's numbered "225", and the last section of chapter 24 is numbered "224". If anyone's seen this symptom before and knows of a possible fix, please let me know. Otherwise, I'll just keep cutting this thing down until I have a minimum example, and troubleshoot it from there. Thanks, SteveT Steve Litt* http://www.troubleshooters.com/ Troubleshooting Training * Human Performance
Re: My LyX section numbers don't reset in new chapters
On Fri, Aug 9, 2013 at 8:55 PM, Steve Litt <sl...@troubleshooters.com>wrote: > Hi all, > > I'm asking this here in case anyone can casually tell me something to > try. Otherwise I'll need to carve my file up like a Christmas turkey to > find the root cause. > > Anyway, in the LyX environment, but not in the PDF or the DVI, section > numbers don't reset after chapter changes. So in my book, the first > section header of chapter 25 is numbered 225, and the first subsection > of its third section is 227.1. Note that the chapter numbers don't show > up in the *LyX Environment* rendering at all. So chapter 25's first > section isn't numbered "25.1", it's numbered "225", and the last section > of chapter 24 is numbered "224". > > If anyone's seen this symptom before and knows of a possible fix, > please let me know. Otherwise, I'll just keep cutting this thing down > until I have a minimum example, and troubleshoot it from there. > > It sounds like a layout issue. Which class/layout are you using? S. -- __ Stefano Franchi Associate Research Professor Department of Hispanic StudiesPh: +1 (979) 845-2125 Texas A University Fax: +1 (979) 845-6421 College Station, Texas, USA stef...@tamu.edu http://stefano.cleinias.org
Re: multiple indexes and section numbers
John White wrote: I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. You can adjust the sizes as they appear in LyX, if you like, by editing the layout files. Copy stdsections.inc to your local LyX directory, open it up in a text editor, and you'll see where the sizes and other aspects of the font are set. Change them as you wish. The details on font setting are in the Customization manual. If you want to adjust the sizes in LaTeX, then use the titlesec package. rh
Re: multiple indexes and section numbers
John White wrote: I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. You can adjust the sizes as they appear in LyX, if you like, by editing the layout files. Copy stdsections.inc to your local LyX directory, open it up in a text editor, and you'll see where the sizes and other aspects of the font are set. Change them as you wish. The details on font setting are in the Customization manual. If you want to adjust the sizes in LaTeX, then use the titlesec package. rh
Re: multiple indexes and section numbers
John White wrote: I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. You can adjust the sizes as they appear in LyX, if you like, by editing the layout files. Copy stdsections.inc to your local LyX directory, open it up in a text editor, and you'll see where the sizes and other aspects of the font are set. Change them as you wish. The details on font setting are in the Customization manual. If you want to adjust the sizes in LaTeX, then use the titlesec package. rh
Re: multiple indexes and section numbers
I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. Sorry for the mistake and thanks to everyone who helped me get to the bottom of this issue. John rgheck wrote: John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
Re: multiple indexes and section numbers
I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. Sorry for the mistake and thanks to everyone who helped me get to the bottom of this issue. John rgheck wrote: John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
Re: multiple indexes and section numbers
I lied. The 0.1 is not in Section numbering in article class. Rather 0.1 numbering comes up, in 1.6.1 at least, only if I go directly to Subsection, without first putting something in section. I got out of the habit of doing this (using Section) in earlier versions as the font in Section was very large. That is no longer the case. Sorry for the mistake and thanks to everyone who helped me get to the bottom of this issue. John rgheck wrote: John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
Re: multiple indexes and section numbers
John White wrote: 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. Have a look at the package splitidx. You have to define a specific index converter in PreferencesOutputLaTeX (e.g. splitindex.pl -m 'makeindex -c- q'), but it works quite well. If you want to reduce ERT, you can define custom insets in a module (with LyX 1.6). An example is attached. Jürgen #\DeclareLyXModule{Index of Names} #DescriptionBegin #Defines an index inset for names. #DescriptionEnd Format 11 InsetLayout NameIndex LyXType custom LabelString IdxNom LatexType command LatexName sindex[nom] Decorationclassic Font Color foreground SizeSmall Family Roman Shape Up Series Medium MiscNo_Emph MiscNo_Noun MiscNo_Bar EndFont LabelFont Color red SizeSmall EndFont MultiPar false # CustomParsfalse # ForcePlaintrue NeedProtect true End
Re: multiple indexes and section numbers
John White wrote: 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. Have a look at the package splitidx. You have to define a specific index converter in PreferencesOutputLaTeX (e.g. splitindex.pl -m 'makeindex -c- q'), but it works quite well. If you want to reduce ERT, you can define custom insets in a module (with LyX 1.6). An example is attached. Jürgen #\DeclareLyXModule{Index of Names} #DescriptionBegin #Defines an index inset for names. #DescriptionEnd Format 11 InsetLayout NameIndex LyXType custom LabelString IdxNom LatexType command LatexName sindex[nom] Decorationclassic Font Color foreground SizeSmall Family Roman Shape Up Series Medium MiscNo_Emph MiscNo_Noun MiscNo_Bar EndFont LabelFont Color red SizeSmall EndFont MultiPar false # CustomParsfalse # ForcePlaintrue NeedProtect true End
Re: multiple indexes and section numbers
John White wrote: > 1. I would sure like to be able to make multiple indexes in the article > class. I see an article in wikipedia about doing such in memoir class > but don't want to use Book. Have a look at the package splitidx. You have to define a specific index converter in Preferences>Output>LaTeX (e.g. "splitindex.pl -m 'makeindex -c- q'"), but it works quite well. If you want to reduce ERT, you can define custom insets in a module (with LyX 1.6). An example is attached. Jürgen #\DeclareLyXModule{Index of Names} #DescriptionBegin #Defines an index inset for names. #DescriptionEnd Format 11 InsetLayout NameIndex LyXType custom LabelString IdxNom LatexType command LatexName sindex[nom] Decorationclassic Font Color foreground SizeSmall Family Roman Shape Up Series Medium MiscNo_Emph MiscNo_Noun MiscNo_Bar EndFont LabelFont Color red SizeSmall EndFont MultiPar false # CustomParsfalse # ForcePlaintrue NeedProtect true End
multiple indexes and section numbers
Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS platform. 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. Thx John
Re: multiple indexes and section numbers
On Tue, 03 Feb 2009 17:33:35 -0800 John White j...@lawquest.com wrote: Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS platform. 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. Memoir also has an article option. I use the multiple indexing capabilities of Memoir a lot. Alternatively, there are LaTeX packages that can do multiple indexes. Try multind or index. I used index before switching to Memoir and it worked well. See the TeX FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=multind HTH, Alan 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. Thx John
Re: multiple indexes and section numbers
John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
multiple indexes and section numbers
Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS platform. 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. Thx John
Re: multiple indexes and section numbers
On Tue, 03 Feb 2009 17:33:35 -0800 John White j...@lawquest.com wrote: Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS platform. 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. Memoir also has an article option. I use the multiple indexing capabilities of Memoir a lot. Alternatively, there are LaTeX packages that can do multiple indexes. Try multind or index. I used index before switching to Memoir and it worked well. See the TeX FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=multind HTH, Alan 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. Thx John
Re: multiple indexes and section numbers
John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
multiple indexes and section numbers
Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS platform. 1. I would sure like to be able to make multiple indexes in the article class. I see an article in wikipedia about doing such in memoir class but don't want to use Book. 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. Thx John
Re: multiple indexes and section numbers
On Tue, 03 Feb 2009 17:33:35 -0800 John Whitewrote: > Folks, I use lyx 1.6.1 on a linux (vector linux slackware) OS > platform. > > 1. I would sure like to be able to make multiple indexes in the > article class. I see an article in wikipedia about doing such in > memoir class but don't want to use Book. Memoir also has an "article" option. I use the multiple indexing capabilities of Memoir a lot. Alternatively, there are LaTeX packages that can do multiple indexes. Try "multind" or "index". I used "index" before switching to Memoir and it worked well. See the TeX FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=multind HTH, Alan > > 2. Also, I would love an easy way to turn off the horrible lyx > section numbering machine (0.1) in article class and have it start > instead at simple 1 (1). If I fool with it enough, it seems to > correct itself, but its hit and miss every time. > > Thx > > John >
Re: multiple indexes and section numbers
John White wrote: 2. Also, I would love an easy way to turn off the horrible lyx section numbering machine (0.1) in article class and have it start instead at simple 1 (1). If I fool with it enough, it seems to correct itself, but its hit and miss every time. I don't see this (Fedora 8, LyX 1.6.2svn). Did you upgrade from a previous version and have a custom article layout? rh
Continuous section numbers
Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Re: Continuous section numbers
Laurent Duperval wrote: Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? Certainly, but you may need to edit the LaTeX class file to get it to work. That said, you might just be able to use the remreset package, which you can find (as usual) at ctan.org. Try in the preamble: \makeatletter [EMAIL PROTECTED] \makeatother To get LyX to behave as you want, you'll have to edit the layout files. Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://frege.brown.edu/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Continuous section numbers
On Fri, 21 Sep 2007 19:04:02 -0400, Richard Heck wrote: Laurent Duperval wrote: Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Is this possible? Certainly, but you may need to edit the LaTeX class file to get it to work. That said, you might just be able to use the remreset package, which you can find (as usual) at ctan.org. Try in the preamble: \makeatletter [EMAIL PROTECTED] \makeatother To get LyX to behave as you want, you'll have to edit the layout files. Hmmm... Ok, once I have all my stuff ready I'll look at that. Thanks! L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Continuous section numbers
Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Re: Continuous section numbers
Laurent Duperval wrote: Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? Certainly, but you may need to edit the LaTeX class file to get it to work. That said, you might just be able to use the remreset package, which you can find (as usual) at ctan.org. Try in the preamble: \makeatletter [EMAIL PROTECTED] \makeatother To get LyX to behave as you want, you'll have to edit the layout files. Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://frege.brown.edu/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Continuous section numbers
On Fri, 21 Sep 2007 19:04:02 -0400, Richard Heck wrote: Laurent Duperval wrote: Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Is this possible? Certainly, but you may need to edit the LaTeX class file to get it to work. That said, you might just be able to use the remreset package, which you can find (as usual) at ctan.org. Try in the preamble: \makeatletter [EMAIL PROTECTED] \makeatother To get LyX to behave as you want, you'll have to edit the layout files. Hmmm... Ok, once I have all my stuff ready I'll look at that. Thanks! L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Continuous section numbers
Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Re: Continuous section numbers
Laurent Duperval wrote: Hi, I want to create a document where I have multiple chapters, but I want \section numbers to continue. I.e. something that looks like this: Chapter 1 1 A Section 2 A Section 3 A Section Chapter 2 4 A Section 5 A Section 6 A Section 7 A Section Chapter 4 8 A Section 9 A Section Is this possible? Certainly, but you may need to edit the LaTeX class file to get it to work. That said, you might just be able to use the remreset package, which you can find (as usual) at ctan.org. Try in the preamble: \makeatletter [EMAIL PROTECTED] \makeatother To get LyX to behave as you want, you'll have to edit the layout files. Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://frege.brown.edu/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Continuous section numbers
On Fri, 21 Sep 2007 19:04:02 -0400, Richard Heck wrote: > Laurent Duperval wrote: >> Hi, >> >> I want to create a document where I have multiple chapters, but I want >> \section numbers to continue. I.e. something that looks like this: >> Is this possible? >> > Certainly, but you may need to edit the LaTeX class file to get it to > work. That said, you might just be able to use the remreset package, > which you can find (as usual) at ctan.org. Try in the preamble: > \makeatletter > [EMAIL PROTECTED] > \makeatother > To get LyX to behave as you want, you'll have to edit the layout files. > Hmmm... Ok, once I have all my stuff ready I'll look at that. Thanks! L -- Prenez la parole en public en étant Speak to an audience while being moins nerveux et plus convaincant! less nervous and more convincing! Éveillez l'orateur en vous!Bring out the speaker in you! Information: [EMAIL PROTECTED] http://www.duperval.com (514) 902-0186
Re: Section numbers in left margin?
This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Also memoir: \chapterstyle{hangnum} this did not not touch (sub)sections at all. pavel
Re: Section numbers in left margin?
Pavel Sanda wrote: \chapterstyle{hangnum} this did not not touch (sub)sections at all. It's called chapterstyle, after all ;-) Jürgen
Re: Section numbers in left margin?
This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Also memoir: \chapterstyle{hangnum} this did not not touch (sub)sections at all. pavel
Re: Section numbers in left margin?
Pavel Sanda wrote: \chapterstyle{hangnum} this did not not touch (sub)sections at all. It's called chapterstyle, after all ;-) Jürgen
Re: Section numbers in left margin?
> > This can certainly be done with the koma-script classes. See also the > > titlesec package. These will allow you to add arbitrary formatting > > commands to set the section titles. > > Also memoir: > > \chapterstyle{hangnum} this did not not touch (sub)sections at all. pavel
Re: Section numbers in left margin?
Pavel Sanda wrote: > > \chapterstyle{hangnum} > > this did not not touch (sub)sections at all. It's called "chapterstyle", after all ;-) Jürgen
Re: Section numbers in left margin?
Steve Litt wrote: How do you know about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes Jürgen
Re: Section numbers in left margin?
Juergen Spitzmueller wrote: Steve Litt wrote: How do you know about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes A few more resources, besides the ones Jurgen mentioned: * The /LaTeX Companion/ both lists and documents many commonly used packages, including pretty much all of those that ship with standard distributions. I couldn't get along without it. * TeX distributions ship with a ton of documentation. Finding your way around it can be the tricky part. My distribution, tetex, ships with an index of all available documentation, at /usr/share/texmf/doc/helpindex.html. * The TeX Catalogue, at http://www.ctan.org/tex-archive/help/Catalogue/catalogue.html, is extremely comprehensive, and the topical index is incredibly helpful. (I should use it more.) * Subscribe to the CTAN announcements RSS feed, at http://rss.gmane.org/gmane.comp.tex.ctan.announce, and keep up-to-date with what packages are being added and updated. If you don't use RSS (and if not, why on earth not?), you can just read the blog at http://blog.gmane.org/gmane.comp.tex.ctan.announce. Cheers, Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
Steve Litt wrote: How do you know about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes Jürgen
Re: Section numbers in left margin?
Juergen Spitzmueller wrote: Steve Litt wrote: How do you know about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes A few more resources, besides the ones Jurgen mentioned: * The /LaTeX Companion/ both lists and documents many commonly used packages, including pretty much all of those that ship with standard distributions. I couldn't get along without it. * TeX distributions ship with a ton of documentation. Finding your way around it can be the tricky part. My distribution, tetex, ships with an index of all available documentation, at /usr/share/texmf/doc/helpindex.html. * The TeX Catalogue, at http://www.ctan.org/tex-archive/help/Catalogue/catalogue.html, is extremely comprehensive, and the topical index is incredibly helpful. (I should use it more.) * Subscribe to the CTAN announcements RSS feed, at http://rss.gmane.org/gmane.comp.tex.ctan.announce, and keep up-to-date with what packages are being added and updated. If you don't use RSS (and if not, why on earth not?), you can just read the blog at http://blog.gmane.org/gmane.comp.tex.ctan.announce. Cheers, Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
Steve Litt wrote: > How do you know about all these packages? This is true for many on the > list -- someone comes up with a need and you know exactly what package to > use to accomplish it. Do you have all this memorized, or do you have a > quick way of looking it up? Either way, how do you do it -- I want to do > it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes Jürgen
Re: Section numbers in left margin?
Juergen Spitzmueller wrote: > Steve Litt wrote: > >> How do you know about all these packages? This is true for many on the list >> -- someone comes up with a need and you know exactly what package to use to >> accomplish it. Do you have all this memorized, or do you have a quick way of >> looking it up? Either way, how do you do it -- I want to do it too. >> > Several reasons. I use many of the packages (like enumitem) myself. I've > published quite a few books recently, and faced many of those questions there > myself. And I frequently follow the discussion on comp.text.tex and (German) > de.comp.text.tex (which both are good newsgroups, and googling their archives > often helps). > > Finally, another excellent resource is Robin Fairbairn's TUG FAQ: > http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes > A few more resources, besides the ones J"urgen mentioned: * The /LaTeX Companion/ both lists and documents many commonly used packages, including pretty much all of those that ship with standard distributions. I couldn't get along without it. * TeX distributions ship with a ton of documentation. Finding your way around it can be the tricky part. My distribution, tetex, ships with an index of all available documentation, at /usr/share/texmf/doc/helpindex.html. * The TeX Catalogue, at http://www.ctan.org/tex-archive/help/Catalogue/catalogue.html, is extremely comprehensive, and the topical index is incredibly helpful. (I should use it more.) * Subscribe to the CTAN announcements RSS feed, at http://rss.gmane.org/gmane.comp.tex.ctan.announce, and keep up-to-date with what packages are being added and updated. If you don't use RSS (and if not, why on earth not?), you can just read the blog at http://blog.gmane.org/gmane.comp.tex.ctan.announce. Cheers, Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
On Thursday 25 January 2007 10:19, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? That would be really cool. Anyway, the following is just a guess, completely untested, but maybe it will start off your investigation... \let\oldsection = \section \let\endoldsection = \endsection \renewenvironment{section}{ \leftskip -0.6in \begin{oldsection} }{ \end{oldsection} } HTH (one can always hope) SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
Re: Section numbers in left margin?
This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Richard John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? _ MSN Hotmail is evolving – check out the new Windows Live Mail http://ideas.live.com -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
On Jan 25, 2007, at 9:19 AM, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: On Jan 25, 2007, at 9:19 AM, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. The labels are set using \labelenumi, \labelenumii, \labelenumiii, and \labelenumiv, depending on the depth. These can be \renewcommand'ed as you wish. See also the varioref package's \labelformat command. I don't know whether enumerate can be modified the way arbitrary lists can be, i.e., whether \labelsep and the like exist for this environment. (See http://www.giss.nasa.gov/tools/latex/ltx-260.html.)* *But one could try it and find out. Richard Heck -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen
Re: Section numbers in left margin?
Richard Heck wrote: This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Also memoir: \chapterstyle{hangnum} Jürgen
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen Thanks, Jürgen.
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen This does set the numerals 1, 2, 3, ... in the left margin, with the text lined up with the margin, but increasing the depth no longer indents the list, so when an exam problem has two parts (a) and (b) I get 1 (a) (b) 2 rather than 1 (a) (b) 2 Is there a way to get the normal indenting behavior with increased depth, using the preamble? Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation.
Re: Section numbers in left margin?
On Jan 25, 2007, at 1:55 PM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation. Works like a charm. Thanks, Jürgen. And I promise to read the documentation for enumitem. Bruce
Re: Section numbers in left margin?
On Thursday 25 January 2007 14:55, Juergen Spitzmueller wrote: Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation. Jürgen, How do you *know* about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Thanks SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
Re: Section numbers in left margin?
On Thursday 25 January 2007 10:19, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? That would be really cool. Anyway, the following is just a guess, completely untested, but maybe it will start off your investigation... \let\oldsection = \section \let\endoldsection = \endsection \renewenvironment{section}{ \leftskip -0.6in \begin{oldsection} }{ \end{oldsection} } HTH (one can always hope) SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
Re: Section numbers in left margin?
This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Richard John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? _ MSN Hotmail is evolving – check out the new Windows Live Mail http://ideas.live.com -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
On Jan 25, 2007, at 9:19 AM, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: On Jan 25, 2007, at 9:19 AM, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. The labels are set using \labelenumi, \labelenumii, \labelenumiii, and \labelenumiv, depending on the depth. These can be \renewcommand'ed as you wish. See also the varioref package's \labelformat command. I don't know whether enumerate can be modified the way arbitrary lists can be, i.e., whether \labelsep and the like exist for this environment. (See http://www.giss.nasa.gov/tools/latex/ltx-260.html.)* *But one could try it and find out. Richard Heck -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen
Re: Section numbers in left margin?
Richard Heck wrote: This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Also memoir: \chapterstyle{hangnum} Jürgen
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen Thanks, Jürgen.
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen This does set the numerals 1, 2, 3, ... in the left margin, with the text lined up with the margin, but increasing the depth no longer indents the list, so when an exam problem has two parts (a) and (b) I get 1 (a) (b) 2 rather than 1 (a) (b) 2 Is there a way to get the normal indenting behavior with increased depth, using the preamble? Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation.
Re: Section numbers in left margin?
On Jan 25, 2007, at 1:55 PM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation. Works like a charm. Thanks, Jürgen. And I promise to read the documentation for enumitem. Bruce
Re: Section numbers in left margin?
On Thursday 25 January 2007 14:55, Juergen Spitzmueller wrote: Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation. Jürgen, How do you *know* about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Thanks SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
Re: Section numbers in left margin?
On Thursday 25 January 2007 10:19, John Hughes wrote: > Is there a way of making the section (and subsection etc.) numbers appear > in the left margin, so that the text of the section headings themselves are > lined up with the left margin? That would be really cool. Anyway, the following is just a guess, completely untested, but maybe it will start off your investigation... \let\oldsection = \section \let\endoldsection = \endsection \renewenvironment{section}{ \leftskip -0.6in \begin{oldsection} }{ \end{oldsection} } HTH (one can always hope) SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
Re: Section numbers in left margin?
This can certainly be done with the koma-script classes. See also the titlesec package. These will allow you to add arbitrary formatting commands to set the section titles. Richard John Hughes wrote: > Is there a way of making the section (and subsection etc.) numbers > appear in the left margin, so that the text of the section headings > themselves are lined up with the left margin? > > _ > MSN Hotmail is evolving – check out the new Windows Live Mail > http://ideas.live.com > -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
On Jan 25, 2007, at 9:19 AM, John Hughes wrote: Is there a way of making the section (and subsection etc.) numbers appear in the left margin, so that the text of the section headings themselves are lined up with the left margin? I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: > On Jan 25, 2007, at 9:19 AM, John Hughes wrote: >> Is there a way of making the section (and subsection etc.) numbers >> appear in the left margin, so that the text of the section headings >> themselves are lined up with the left margin? > I have the same question, but concerning the numbers 1, 2, 3, ... in > an enumerate environment. The labels are set using \labelenumi, \labelenumii, \labelenumiii, and \labelenumiv, depending on the depth. These can be \renewcommand'ed as you wish. See also the varioref package's \labelformat command. I don't know whether enumerate can be modified the way arbitrary lists can be, i.e., whether \labelsep and the like exist for this environment. (See http://www.giss.nasa.gov/tools/latex/ltx-260.html.)* *But one could try it and find out. Richard Heck -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Section numbers in left margin?
Bruce Pourciau wrote: > I have the same question, but concerning the numbers 1, 2, 3, ... in > an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen
Re: Section numbers in left margin?
Richard Heck wrote: > This can certainly be done with the koma-script classes. See also the > titlesec package. These will allow you to add arbitrary formatting > commands to set the section titles. Also memoir: \chapterstyle{hangnum} Jürgen
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen Thanks, Jürgen.
Re: Section numbers in left margin?
On Jan 25, 2007, at 11:30 AM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: I have the same question, but concerning the numbers 1, 2, 3, ... in an enumerate environment. \usepackage{enumitem} \setenumerate{leftmargin=0pt, labelsep=.6em} Jürgen This does set the numerals 1, 2, 3, ... in the left margin, with the text lined up with the margin, but increasing the depth no longer indents the list, so when an exam problem has two parts (a) and (b) I get 1 (a) (b) 2 rather than 1 (a) (b) 2 Is there a way to get the normal indenting behavior with increased depth, using the preamble? Bruce
Re: Section numbers in left margin?
Bruce Pourciau wrote: > Is there a way to get the normal indenting behavior with increased > depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation.
Re: Section numbers in left margin?
On Jan 25, 2007, at 1:55 PM, Juergen Spitzmueller wrote: Bruce Pourciau wrote: Is there a way to get the normal indenting behavior with increased depth, using the preamble? You can limit the changes to the first level by using the optional argument of setenumerate: \setenumerate[1]{leftmargin=0pt, labelsep=.6em} Jürgen P.S.: enumitem ships with an excellent documentation. Works like a charm. Thanks, Jürgen. And I promise to read the documentation for enumitem. Bruce
Re: Section numbers in left margin?
On Thursday 25 January 2007 14:55, Juergen Spitzmueller wrote: > Bruce Pourciau wrote: > > Is there a way to get the normal indenting behavior with increased > > depth, using the preamble? > > You can limit the changes to the first level by using the optional argument > of setenumerate: > > \setenumerate[1]{leftmargin=0pt, labelsep=.6em} > > Jürgen > > P.S.: enumitem ships with an excellent documentation. Jürgen, How do you *know* about all these packages? This is true for many on the list -- someone comes up with a need and you know exactly what package to use to accomplish it. Do you have all this memorized, or do you have a quick way of looking it up? Either way, how do you do it -- I want to do it too. Thanks SteveT Steve Litt Author: Universal Troubleshooting Process books and courseware http://www.troubleshooters.com/
arbitrary Section numbers
Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? Nick Kuzmik (845) 406-5115 AIM NKUZMIK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: arbitrary Section numbers
Nick Kuzmik wrote: Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? You can use ERT to set the chapter, section, subsection etc. counters to anything you want. The command is \setcounter{x}{n} where x is the name of the counter (chapter, section, subsection, subsubsection, ...) and n is a positive integer. You put the command in ERT prior to the heading where you want it to take effect, and you can do so repeatedly if you want the heading numbers to skip around. Two things to keep in mind: 1. The counter must be defined. (For instance, the article class does not have a chapter counter.) 2. The heading environment will increment the corresponding counter, so you need to make allowances for that. Suppose you want the first heading to be a subsection numbered 2.5. You would put the following in ERT prior to the subsection environment: \setcounter{section}{2}\setcounter{subsection}{4}. The subsection environment will increment the subsection counter to 5 (but will not change the section counter). Paul
Re: arbitrary Section numbers
On 12/16/05, Nick Kuzmik [EMAIL PROTECTED] wrote: Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? Nick Kuzmik (845) 406-5115 AIM NKUZMIK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Hello, I attach a simple LyX file that does the trick. The general pattern is: \setcounter{Some}{Value} Where Some is the environment you want to change (section, equation ...) -- Andres #LyX 1.3 created this file. For more info see http://www.lyx.org/ \lyxformat 221 \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \use_natbib 0 \use_numerical_citations 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title Arbitrary Section Numbers \layout Author Andres Becerra \layout Standard \begin_inset ERT status Collapsed \layout Standard \backslash setcounter{section}{3} \end_inset \layout Section Introduction \layout Section Content A \layout Section Content B \layout Section Conclusions \the_end
arbitrary Section numbers
Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? Nick Kuzmik (845) 406-5115 AIM NKUZMIK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: arbitrary Section numbers
Nick Kuzmik wrote: Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? You can use ERT to set the chapter, section, subsection etc. counters to anything you want. The command is \setcounter{x}{n} where x is the name of the counter (chapter, section, subsection, subsubsection, ...) and n is a positive integer. You put the command in ERT prior to the heading where you want it to take effect, and you can do so repeatedly if you want the heading numbers to skip around. Two things to keep in mind: 1. The counter must be defined. (For instance, the article class does not have a chapter counter.) 2. The heading environment will increment the corresponding counter, so you need to make allowances for that. Suppose you want the first heading to be a subsection numbered 2.5. You would put the following in ERT prior to the subsection environment: \setcounter{section}{2}\setcounter{subsection}{4}. The subsection environment will increment the subsection counter to 5 (but will not change the section counter). Paul
Re: arbitrary Section numbers
On 12/16/05, Nick Kuzmik [EMAIL PROTECTED] wrote: Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? Nick Kuzmik (845) 406-5115 AIM NKUZMIK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Hello, I attach a simple LyX file that does the trick. The general pattern is: \setcounter{Some}{Value} Where Some is the environment you want to change (section, equation ...) -- Andres #LyX 1.3 created this file. For more info see http://www.lyx.org/ \lyxformat 221 \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \use_natbib 0 \use_numerical_citations 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title Arbitrary Section Numbers \layout Author Andres Becerra \layout Standard \begin_inset ERT status Collapsed \layout Standard \backslash setcounter{section}{3} \end_inset \layout Section Introduction \layout Section Content A \layout Section Content B \layout Section Conclusions \the_end
arbitrary Section numbers
Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? Nick Kuzmik (845) 406-5115 AIM NKUZMIK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: arbitrary Section numbers
Nick Kuzmik wrote: Among other things I like to use Lyx to create study guides for my math courses. I use Section/subsection/subsubsection to organize that info in a reasonable fashion. I also like to use a TOC as some of these study guides can get a tad large, and the TOC speads up the studying. What I've found awkward is that when a create a study guide for say chapters 2.5-4.4, and start using Section and such, Lyx automatically starts at Section 1 I've tried using Section* and manually titeling my headings, but they they don't appear in the TOC. What I'm asking is does anybody know of some ERT that will allow me to insert a section heading and dispite being the first section on the page, have that be section 4, and still have it show up in the TOC? Am I trying to have my cake and eat it too? You can use ERT to set the chapter, section, subsection etc. counters to anything you want. The command is \setcounter{x}{n} where x is the name of the counter (chapter, section, subsection, subsubsection, ...) and n is a positive integer. You put the command in ERT prior to the heading where you want it to take effect, and you can do so repeatedly if you want the heading numbers to skip around. Two things to keep in mind: 1. The counter must be defined. (For instance, the article class does not have a chapter counter.) 2. The heading environment will increment the corresponding counter, so you need to make allowances for that. Suppose you want the first heading to be a subsection numbered 2.5. You would put the following in ERT prior to the subsection environment: \setcounter{section}{2}\setcounter{subsection}{4}. The subsection environment will increment the subsection counter to 5 (but will not change the section counter). Paul
Re: arbitrary Section numbers
On 12/16/05, Nick Kuzmik <[EMAIL PROTECTED]> wrote: > Among other things I like to use Lyx to create study guides for my math > courses. I use Section/subsection/subsubsection to organize that info in a > reasonable fashion. I also like to use a TOC as some of these study guides > can get a tad large, and the TOC speads up the studying. > > What I've found awkward is that when a create a study guide for say > chapters 2.5-4.4, and start using Section and such, Lyx automatically starts > at Section 1 > > I've tried using Section* and manually titeling my headings, but they they > don't appear in the TOC. > > What I'm asking is does anybody know of some ERT that will allow me to > insert a section heading and dispite being the first section on the page, > have that be section 4, and still have it show up in the TOC? > > Am I trying to have my cake and eat it too? > > > > Nick Kuzmik > (845) 406-5115 > AIM NKUZMIK > __ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > Hello, I attach a simple LyX file that does the trick. The general pattern is: \setcounter{Some}{Value} Where Some is the environment you want to change (section, equation ...) -- Andres #LyX 1.3 created this file. For more info see http://www.lyx.org/ \lyxformat 221 \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \use_natbib 0 \use_numerical_citations 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title Arbitrary Section Numbers \layout Author Andres Becerra \layout Standard \begin_inset ERT status Collapsed \layout Standard \backslash setcounter{section}{3} \end_inset \layout Section Introduction \layout Section Content A \layout Section Content B \layout Section Conclusions \the_end
top level section numbers needed in format X.0
Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter
Re: top level section numbers needed in format X.0
Todd Denniston wrote: Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt Try adding this to the preamble: \def\thesection{\arabic{section}.0} \def\thesubsection{\arabic{section}.\arabic{subsection}} \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} -- Paul
Re: top level section numbers needed in format X.0
Paul A. Rubin wrote: Todd Denniston wrote: Hello, SNIP what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section SNIP Try adding this to the preamble: \def\thesection{\arabic{section}.0} \def\thesubsection{\arabic{section}.\arabic{subsection}} \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} -- Paul Simple and Effective. Thanks, and if we ever meet, remind me I owe you a few beers. -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter
top level section numbers needed in format X.0
Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter
Re: top level section numbers needed in format X.0
Todd Denniston wrote: Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt Try adding this to the preamble: \def\thesection{\arabic{section}.0} \def\thesubsection{\arabic{section}.\arabic{subsection}} \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} -- Paul
Re: top level section numbers needed in format X.0
Paul A. Rubin wrote: Todd Denniston wrote: Hello, SNIP what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section SNIP Try adding this to the preamble: \def\thesection{\arabic{section}.0} \def\thesubsection{\arabic{section}.\arabic{subsection}} \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} -- Paul Simple and Effective. Thanks, and if we ever meet, remind me I owe you a few beers. -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter
top level section numbers needed in format X.0
Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter
Re: top level section numbers needed in format X.0
Todd Denniston wrote: Hello, I am using the article class for my document. LyX/LaTeX outputs section numbering as: 1first top level section 1.1first subsection 1.1.1first subsubsection 2second top level section what I need is (I am required to use it, I do not like it though as it adds confusion by making top levels look like subsections): 1.0first top level section 1.1first subsection 1.1.1first subsubsection 2.0second top level section I found in a TeX FAQ{1} [EMAIL PROTECTED] \csname the#1\endcsname.0\quad } which gives me 1.0first top level section 1.1.0first subsection 1.1.1.0first subsubsection 2.0second top level section I have tried [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.0\quad } which fails because [EMAIL PROTECTED]@section is not defined??? %the following one does nothing to my output. [EMAIL PROTECTED]@section}[1]{% \csname the#1\endcsname.\quad } I can't figure out (this bit of LaTeX is truly beyond me) why putting the \let... bit of code from the FAQ{1} in my document gives at least one error for every section+subsection+subsubsection I have. Can someone here help me get the incantation correct please? Or if you know of a convincing bit of documentation indicating doing the toplevel sections as X.0 is bad (makes you look like an idiot) psychologically/professionally, please point it out so I can use it to request a change to the standard I have to follow. Thanks. {1} http://www.tex.ac.uk/cgi-bin/texfaq2html?label=seccntfmt Try adding this to the preamble: \def\thesection{\arabic{section}.0} \def\thesubsection{\arabic{section}.\arabic{subsection}} \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} -- Paul
Re: top level section numbers needed in format X.0
"Paul A. Rubin" wrote: > > Todd Denniston wrote: > > > Hello, > > what I need is (I am required to use it, I do not like it though as it adds > > confusion by making top levels look like subsections): > > 1.0first top level section > > 1.1first subsection > > 1.1.1first subsubsection > > 2.0second top level section > Try adding this to the preamble: > > \def\thesection{\arabic{section}.0} > \def\thesubsection{\arabic{section}.\arabic{subsection}} > \def\thesubsubsection{\arabic{section}.\arabic{subsection}.\arabic{subsubsection}} > > -- Paul Simple and Effective. Thanks, and if we ever meet, remind me I owe you a few beers. -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter