On 04/19/2017 02:27 AM, Frederick FN Noronha फ्रेड्रिक नोरोन्या *فريدريك
نورونيا wrote:
Thank you so much, Paul. That was so helpful.
If you don't mind me asking an elementary question -- how does one
make the 'language' usage consistent throughout a file?
We're one of the few serious
Thank you so much, Paul. That was so helpful.
If you don't mind me asking an elementary question -- how does one make the
'language' usage consistent throughout a file?
We're one of the few serious publishing houses (doing 12-16 books a year)
that uses Lyx for all its typesetting. Based in Goa,
2010/4/10 mara.44 mara...@gmail.com:
hi,
i'm writing my master thesis using lyx and i have a small problems
i already found how to change table name to polish tablica, but what i still
don't know is how to change fontsize of caption. e.g. i have a table with
caption:
Table 2.1 bla bla
mara.44 mara...@... writes:
when i put few references together in one place i get something like this:
[101, 102, 103, 104, 105] is there any way to change it (automatically) into
[101-105]?
and also in my thesis, according to my university standards, bibliography
must be a separate
2010/4/10 mara.44 mara...@gmail.com:
hi,
i'm writing my master thesis using lyx and i have a small problems
i already found how to change table name to polish tablica, but what i still
don't know is how to change fontsize of caption. e.g. i have a table with
caption:
Table 2.1 bla bla
mara.44 mara...@... writes:
when i put few references together in one place i get something like this:
[101, 102, 103, 104, 105] is there any way to change it (automatically) into
[101-105]?
and also in my thesis, according to my university standards, bibliography
must be a separate
2010/4/10 mara.44 :
>
> hi,
>
> i'm writing my master thesis using lyx and i have a small problems
>
> i already found how to change table name to polish tablica, but what i still
> don't know is how to change fontsize of caption. e.g. i have a table with
> caption:
>
> Table
mara.44 writes:
>
> when i put few references together in one place i get something like this:
> [101, 102, 103, 104, 105] is there any way to change it (automatically) into
> [101-105]?
>
> and also in my thesis, according to my university standards, bibliography
> must be a
Chapter 6
Bibligraphy
new page
Bibliography
[1] bla
[2] bla bla
is there any way to change it so it would look like this:
new page
Chapter 6
Bibliography
[1] bla
[2] bla bla
--
View this message in context:
http://n2.nabble.com/problem-with-table-and-figure-caption-and-bibliography
Chapter 6
Bibligraphy
new page
Bibliography
[1] bla
[2] bla bla
is there any way to change it so it would look like this:
new page
Chapter 6
Bibliography
[1] bla
[2] bla bla
--
View this message in context:
http://n2.nabble.com/problem-with-table-and-figure-caption-and-bibliography
Chapter 6
Bibligraphy
new page
Bibliography
[1] bla
[2] bla bla
is there any way to change it so it would look like this:
new page
Chapter 6
Bibliography
[1] bla
[2] bla bla
--
View this message in context:
http://n2.nabble.com/problem-with-table-and-figure-caption-and-bibliography
Jürgen Spitzmüller wrote:
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
In any case this comes from the class. Switching to article fixes the
Jürgen Spitzmüller wrote:
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
In any case this comes from the class. Switching to article fixes the
Jürgen Spitzmüller wrote:
> > I can see how to respond to the two questions regarding my original post,
> > but I don't see how to respond and also include attachments as requested
> > so my apologies for starting a new thread.
>
> In any case this comes from the class. Switching to article fixes
On Dec 3, 2009, at 9:32 PM, bur...@caltech.edu bur...@caltech.edu wrote:
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file. Specifically, I get part of
bur...@caltech.edu schrieb:
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file.
Can you please provide a _small_ LyX example file to be able to have a
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
Here is the lyx document and also the resulting pdf document.
Sincerely,
Rick
tables_test.lyx
burnes wrote:
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
In any case this comes from the class. Switching to article fixes the issue.
It might be
On Dec 3, 2009, at 9:32 PM, bur...@caltech.edu bur...@caltech.edu wrote:
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file. Specifically, I get part of
bur...@caltech.edu schrieb:
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file.
Can you please provide a _small_ LyX example file to be able to have a
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
Here is the lyx document and also the resulting pdf document.
Sincerely,
Rick
tables_test.lyx
burnes wrote:
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
In any case this comes from the class. Switching to article fixes the issue.
It might be
On Dec 3, 2009, at 9:32 PM, wrote:
> I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
> new user of the Lyx application. I am having problems with the format of
> a simple table when I generate a pdf file. Specifically, I get
bur...@caltech.edu schrieb:
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file.
Can you please provide a _small_ LyX example file to be able to have a
I can see how to respond to the two questions regarding my original post,
but I don't see how to respond and also include attachments as requested
so my apologies for starting a new thread.
Here is the lyx document and also the resulting pdf document.
Sincerely,
Rick
tables_test.lyx
burnes wrote:
> I can see how to respond to the two questions regarding my original post,
> but I don't see how to respond and also include attachments as requested
> so my apologies for starting a new thread.
In any case this comes from the class. Switching to article fixes the issue.
It might
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file. Specifically, I get part of an
extra cell attached to the bottom-left corner of the table I create. The
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file. Specifically, I get part of an
extra cell attached to the bottom-left corner of the table I create. The
I have Lyx version 1.6.4.1 on a mac running os x version 10.5.8 and am a
new user of the Lyx application. I am having problems with the format of
a simple table when I generate a pdf file. Specifically, I get part of an
extra cell attached to the bottom-left corner of the table I create. The
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or something
else to get the text in the first column centered vertically? The rows in
the second column should be
On Aug 14, 2009, at 4:37 AM, Matthias Bußjäger wrote:
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or
something
else to get the text in the first column
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or something
else to get the text in the first column centered vertically? The rows in
the second column should be
On Aug 14, 2009, at 4:37 AM, Matthias Bußjäger wrote:
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or
something
else to get the text in the first column
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or something
else to get the text in the first column centered vertically? The rows in
the second column should be
On Aug 14, 2009, at 4:37 AM, Matthias Bußjäger wrote:
Hello,
I have a problem to build a table with different rows in the columns.
For Example:
I have 4 rows and 2 columns.
How is it possible to merge the 4 rows in the first column? Or
something
else to get the text in the first column
rgheck wrote:
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects
rgheck wrote:
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects
rgheck wrote:
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects manual for
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects manual for
Rasheda Khanam wrote:
Hi
How could I accommodate the attached table in one page (without page
number entering in the table)? or How could I insert a break that will
transfer the table in two pages?
I think the answer is that you should use longtable. See the Embedded
Objects manual for
Hi,
I tried to insert the table as a Tex code. The table works fine but that
table can't be cross-referred in the Lyx document.
Does anybody know a way out for this problem?
Regards,
Tariq Abdullah
Hi,
I tried to insert the table as a Tex code. The table works fine but that
table can't be cross-referred in the Lyx document.
Does anybody know a way out for this problem?
Regards,
Tariq Abdullah
Hi,
I tried to insert the table as a Tex code. The table works fine but that
table can't be cross-referred in the Lyx document.
Does anybody know a way out for this problem?
Regards,
Tariq Abdullah
Marius Ionescu wrote:
I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
strange when, in the math mode (display), I want to insert a two-by-two
matrix and then I select it and try to insert parenthesis to the left and
right (a matrix). After I press the insert button (for
Marius Ionescu wrote:
I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
strange when, in the math mode (display), I want to insert a two-by-two
matrix and then I select it and try to insert parenthesis to the left and
right (a matrix). After I press the insert button (for
Marius Ionescu wrote:
> I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
> strange when, in the math mode (display), I want to insert a two-by-two
> matrix and then I select it and try to insert parenthesis to the left and
> right (a matrix). After I press the insert button
Hi.
I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
strange when, in the math mode (display), I want to insert a two-by-two
matrix and then I select it and try to insert parenthesis to the left and
right (a matrix). After I press the insert button (for parenthesis), the
Hi.
I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
strange when, in the math mode (display), I want to insert a two-by-two
matrix and then I select it and try to insert parenthesis to the left and
right (a matrix). After I press the insert button (for parenthesis), the
Hi.
I am using Lyx1.4pre2 with the qt frontend on Ubuntu 5.04. It behaves
strange when, in the math mode (display), I want to insert a two-by-two
matrix and then I select it and try to insert parenthesis to the left and
right (a matrix). After I press the insert button (for parenthesis), the
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Invisible Person wrote:
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Right click the
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Invisible Person wrote:
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Right click the
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Invisible Person wrote:
Hello,
I have created a table with two columns, and inserted text.
A preview shows me, the text of the columns only in one line, so I don't see all
the text.
How can I use multiple lines in one column, or should I use linebreaks?
Thanks,
Christian
Right click the
I get some errors trying to view in dvi a document -article- in spanish.
If I change the language to english the problem disappears. The problem
happens after introducing a table of contents. The error appears before
the title of the article.
the error message is:
Improper alphabetic constant.
"Jacobo" == Jacobo Myerston [EMAIL PROTECTED] writes:
Jacobo I get some errors trying to view in dvi a document -article-
Jacobo in spanish. If I change the language to english the problem
Jacobo disappears. The problem happens after introducing a table of
Jacobo contents. The error appears
I get some errors trying to view in dvi a document -article- in spanish.
If I change the language to english the problem disappears. The problem
happens after introducing a table of contents. The error appears before
the title of the article.
the error message is:
Improper alphabetic constant.
"Jacobo" == Jacobo Myerston [EMAIL PROTECTED] writes:
Jacobo I get some errors trying to view in dvi a document -article-
Jacobo in spanish. If I change the language to english the problem
Jacobo disappears. The problem happens after introducing a table of
Jacobo contents. The error appears
I get some errors trying to view in dvi a document -article- in spanish.
If I change the language to english the problem disappears. The problem
happens after introducing a table of contents. The error appears before
the title of the article.
the error message is:
Improper alphabetic
> "Jacobo" == Jacobo Myerston <[EMAIL PROTECTED]> writes:
Jacobo> I get some errors trying to view in dvi a document -article-
Jacobo> in spanish. If I change the language to english the problem
Jacobo> disappears. The problem happens after introducing a table of
Jacobo> contents. The error
"Jerry" == Jerry Yuan [EMAIL PROTECTED] writes:
Jerry Hi there, Just found that it doen't work properly to copy a
Jerry table with column control like "@{}c". The control will appear
Jerry in the column width option in the copied table.
Jerry Again, the defined column width will not be copied
"Jerry" == Jerry Yuan [EMAIL PROTECTED] writes:
Jerry Hi there, Just found that it doen't work properly to copy a
Jerry table with column control like "@{}c". The control will appear
Jerry in the column width option in the copied table.
Jerry Again, the defined column width will not be copied
> "Jerry" == Jerry Yuan <[EMAIL PROTECTED]> writes:
Jerry> Hi there, Just found that it doen't work properly to copy a
Jerry> table with column control like "@{}c". The control will appear
Jerry> in the column width option in the copied table.
Jerry> Again, the defined column width will not
65 matches
Mail list logo