Hi,
How do I get to have 'mod' in the math panel? There is bmod, which I am not
sure what it stands for and I need to use 'mod(5)' like things in my
documents...
Thanks
Remzi
Hi,
While making slides, I can not seem to use the figure floats. If I enter a
figure without a float, that is fine, but then when I define a caption field,
I get errors too.
Any idea?
Remzi
Tukka Said:
- Go to math display mode (M-d) if you aren't already
- write left hand side of the equation
- Press ctrl-enter. This should display now 2 more blue boxes after the
left hand side and a new line with 3 blue empty boxes.
- Go back to the first line (press up arrow)
- Now write "=" in
Dear Herbert,
Thank you for your help. But to make that command work I have to enable the
section numbering and I can not have the section numbers appear in the
section (subsection, sub subsection) headings.
Any idea how I can have the equation numbers with section numbers but
sections
On Thursday 08 March 2001 09:48, Chris Schulbert wrote:
= Hi!
=
= I my document I want to switch off temporarily the secion-numbering.
= Although, the sections should still apear in the toc. It is somewhat
= biological work and the many generas and species, I have to describe
= shouldn't show up
Is there a lyx layout file to use FoilTeX?
Remzi
Hi,
I am writing my thesis in report class (lyx-1.1.6fix1). I am using BiBTeX for
my references but I need to change the word 'Bibliograpgy' to 'References'.
Any idea how I can do that?
Thanks in advance.
Remzi
Hi,
I need to have my document numbered in the following way:
table of contents part (right after the title page) should be as: I, II, III,
IV, etc and right at chapter one i need the page numbers start and go as 1,
2, ...
So I basicly need Roman and Arabic numbering...
Any idea how I can do
I am writing a document in report style (Lyx v. 1.1.6fix1)
I have chapters such as
"Chapter 1"
chapter's title
:
:
"Chapter 2"
chapter's title
I want to get rid of "Chapter 1" and "Chapter 2" but I want to have them
appear in TOC (so chapter* is not an option, also because my equations are
On Tuesday 03 April 2001 11:16, Herbert Voss wrote:
= Remzi Seker wrote:
=
= I am writing a document in report style (Lyx v. 1.1.6fix1)
= I have chapters such as
= "Chapter 1"
= chapter's title
= :
= :
= "Chapter 2"
= chapter's title
=
= I want to get rid of "
uto backup of the document and recovered the file (whew!)
--
Remzi Seker
Graduate Assistant
University of Alabama at Birmingham
Electrical and Computer Eng. Dept. BEC 261 B
1530 3rd Avenue South
Birmingham, AL 35294-4461
Tel: (205) 975-0391
Fax: (205) 975-3337
I have a table that is too wide to fit in portrait page orientation. How can
I change the page orientation to landscape for one page?
--
Remzi Seker
Graduate Assistant
University of Alabama at Birmingham
Electrical and Computer Eng. Dept. BEC 261 B
1530 3rd Avenue South
Birmingham, AL 35294
in the final pdf
Thanks in advance
--
Remzi Seker
Graduate Assistant
University of Alabama at Birmingham
Electrical and Computer Eng. Dept. BEC 261 B
1530 3rd Avenue South
Birmingham, AL 35294-4461
Tel: (205) 975-0391
Fax: (205) 975-3337
how can I move title of a report class document up and down?
thanks in advance
--
Remzi Seker
Graduate Assistant
University of Alabama at Birmingham
Electrical and Computer Eng. Dept. BEC 261 B
1530 3rd Avenue South
Birmingham, AL 35294-4461
Tel: (205) 975-0391
Fax: (205) 975-3337
Thanks Kari, it seems to be working...
One thing though, I don't have a heading for 'abstract' when i use
report(koma-script)... How can I have that?
Regards,
Remzi
On Tuesday 10 April 2001 00:55, Kari Ruohonen wrote:
= On Mon, 9 Apr 2001, Remzi Seker wrote:
=
= Hi,
= I am writing a document
Hi,
I need to change the fonts for the following headings that are put
automaticaly by Lyx/Latex.
Contents
List of Figures
References
Those titles are in different size and font than my titles I use for chapters
and sections...
Any help would be appreciated.
Thanks
--
Remzi Seker
Graduate
Thanks alot, that works great, do you know how I can have it centered as well?
On Tuesday 03 April 2001 11:16, Herbert Voss wrote:
= Remzi Seker wrote:
=
= I am writing a document in report style (Lyx v. 1.1.6fix1)
= I have chapters such as
= "Chapter 1"
= chapt
Thank you Herbert --it works fine.
I have another question though... Do you know how I can change the font for
"References" title?
On Tuesday 10 April 2001 17:13, Herbert Voss wrote:
= Remzi Seker wrote:
=
= Hi,
= I need to change the fonts for the following headings th
I must be doing something wrong... it is not working
On Wednesday 11 April 2001 14:34, Herbert Voss wrote:
= Remzi Seker wrote:
=
= I have another question though... Do you know how I can change the font
for = "References" title?
=
= in latex preamble
=
= \AtBeginDocument{\re
dnesday 11 April 2001 14:55, Herbert Voss wrote:
= Remzi Seker wrote:
=
= I must be doing something wrong... it is not working
=
= what kind of textclass? article or book?
=
= Herbert
=
--
Remzi Seker
Graduate Assistant
University of Alabama at Birmingham
Electrical and Computer Eng. Dept. BEC 261 B
Hi, sorry for being not specific enough.. I put:
\renewcommand\bibname{\rmfamily\mdseries REFERENCES}
in tex format (red) in the document right before the ref. field.
It didn't do anything in the preamble.
R
On Wednesday 11 April 2001 14:55, Herbert Voss wrote:
= Remzi Seker wrote:
=
= I must
Working very well now!
thanks!
On Wednesday 11 April 2001 16:16, Herbert Voss wrote:
= Remzi Seker wrote:
=
= Hi, sorry for being not specific enough.. I put:
= \renewcommand\bibname{\rmfamily\mdseries REFERENCES}
= in tex format (red) in the document right before the ref. field
Stopping the scalable fonts from 'editpreferences' solved the problem.
Thank you so much!
Remzi
ps: Thanks to Tukka as well. He always tries to help!
- Original Message -
From: Robert Koehler [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: LyX users [EMAIL PROTECTED]
Sent
Hi Dekel, I have gcc 2.96
I did not compile lyx, but installed it from the rpms.
I am still somewhat new to linux, so what do I do with this patch?
Thanks
Remzi
On Thursday 26 April 2001 15:41, Dekel Tsur wrote:
On Thu, Apr 26, 2001 at 12:59:31PM -0500, Remzi Seker wrote:
Lyx1.1.6fix1
OK, done!
Thanks :)
On Thursday 26 April 2001 15:41, Dekel Tsur wrote:
On Thu, Apr 26, 2001 at 12:59:31PM -0500, Remzi Seker wrote:
Lyx1.1.6fix1
when i update dvi, or even close the xdvi and view dvi again, it brings
up the first dvi that was made from the document, and it does not show
How can I convert a heading to caps inside LaTex Preamble?
Like:
\usepackage{sectsty}
\subsectionfont{\mdseries\textit}
makes the subsection font italic. How can I make the section heading caps
(not small caps)?
thanks
eccc font? I need to use times as a requirement of the thesis...
On Tuesday 01 May 2001 12:08, Herbert Voss wrote:
Remzi Seker wrote:
How can I convert a heading to caps inside LaTex Preamble?
Like:
\usepackage{sectsty}
\subsectionfont{\mdseries\textit}
makes the subsection font
Herbert,
Do you mean the European Concrete Fonts (ECC)? Does it support 12 pts?
Thanks
R
On Tuesday 01 May 2001 12:08, Herbert Voss wrote:
Remzi Seker wrote:
How can I convert a heading to caps inside LaTex Preamble?
Like:
\usepackage{sectsty}
\subsectionfont{\mdseries\textit}
makes
Adreas,
use \mathds{R} for |R etc...
R
On Thursday 03 May 2001 09:28, Andreas Bauer wrote:
Hi everbody!
Is there a way to properly write something like
N(atural number) - R(eal number)
In maths text books it appears N and R look kind of like this
IN - IR
I'd like to use this in
Sorry, the question is abit off topic...
Until yesterday I was able to use pybliographer withour any problem (yes the
window interface!) although I noticed it was giving this warning:
WARNING: Python C API version mismatch for module _recode:
This Python has API version 1009, module _recode
Does anyone know of a good way to convert MS Word documents to Latex or Lyx
(except for word2tex.com's product?) ;-) Since I dont have formulas in the
document i have (tables), I exported the word document to html. Then, I
realized latex2html is a one way program.
Does anyone know how I can
On Wednesday 09 May 2001 08:41, Jean-Pierre.Chretien wrote:
Have a look at rtf2latex2e (tries do deal with formulas as well).
Export to HTML from Word, and use html2latex is a mess in general
because the structure is lost (might be good for tables alone, but
seems to me that rtf2latex2e does
How do I get an appendix field in report koma-script style?
thanks
r
Appendix field that is like abstract and that also appears in TOC...
I used add chapter in report koma-script, but I don't know if this is the
proper thing to do, since page numbering might be different for appendix.
Remzi
I
On Wednesday 09 May 2001 05:38, Herbert Voss wrote:
Remzi Seker
Thanks... I looked through the tutorial and userguide, but I could not see it
yesterday. I guess it is time to get new glasses ;)
thanks bunch.
R
On Wednesday 09 May 2001 09:14, Herbert Voss wrote:
Remzi Seker wrote:
Appendix field that is like abstract and that also appears in TOC...
I
Lyx1.1.6fix1
when i update dvi, or even close the xdvi and view dvi again, it brings up
the first dvi that was made from the document, and it does not show the
changes... any idea?
thanks
remzi
Using pslatex fonts improves the pdf look:
layout document fonts pslatex
R
On Monday 21 May 2001 06:23, Kari Ruohonen wrote:
On Mon, 21 May 2001, Giorgio Corani wrote:
Hi everyone.
I would to get a good pdf output from my lyx document.
I've converted postscript with ps2pdf, but it
Really, I love the look of the logo, and I very dislike the mascot, it
looks ugly. So just having the logo replace the mascot would make me
happy... (-8
You must know some graphic artists. Why not get one of them to draw us a
new mascot. The current one is sort of, kind a like, a
Yes, you can. You are lucky, Mr. Lasgouttes just released his cv class.. You
can get it from (if the url didn't change!) at:
http://www-rocq.inria.fr/~lasgoutt/lyx/cv-1.5.tar.gz
Cheers
R
On Tuesday 03 July 2001 15:29, ray p wrote:
I'm sorry if this has been asked a million times but I've so
Thanks to Dekel and Herbert! One more technical report is out of the way!
Cheers!
R
On Wednesday 08 August 2001 08:17, Dekel Tsur wrote:
On Tue, Aug 07, 2001 at 09:30:47AM -0500, Remzi Seker wrote:
In the Lyx file have something like this:
however in the dvi, what i have
Dear All,
I have the following problem:
The last item (one line) in LOF is on another page by itself and I need to
squeeze it into the previous page with rest of the items in the list. Any
idea how I can do that?
Thanks,
R
I already have
\clubpenalty=1
\widowpenalty=1
\displaywidowpenalty=1
but it doesn't seem to work...
R
On Thursday 09 August 2001 11:50, Herbert Voss wrote:
Remzi Seker wrote:
The last item (one line) in LOF is on another page by itself and I need
to squeeze
That's it!
Thanks bunch!
R
On Thursday 09 August 2001 12:01, Herbert Voss wrote:
Remzi Seker wrote:
I already have
\clubpenalty=1
\widowpenalty=1
\displaywidowpenalty=1
but it doesn't seem to work...
try on the page where the last item should
I think Herbert should add this to his tips site... More and more people are
upgrading to Mandrake 8.0 by now...
R
On Monday 13 August 2001 01:04, Andre Poenitz wrote:
On Sat, Aug 11, 2001 at 06:11:33PM +0200, yves GUILLOU wrote:
I have some problems with LYX, .
I use linux Mandrage 8.0
Message -
From: Andre Poenitz [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: Andre Poenitz [EMAIL PROTECTED]; yves GUILLOU
[EMAIL PROTECTED]; LYX [EMAIL PROTECTED]
Sent: Monday, August 13, 2001 8:44 AM
Subject: Re: problems with lyx
On Mon, Aug 13, 2001 at 08:36:55AM -0500, Remzi Seker
I wonder if this is a bug.
I am editing a document, and after I perform the spellcheck, I can not do it
again for the second time. Moreover, it gives the following error window when
I close LyX:
Error! Couldn't Delete Temporary Dir:
...
It also takes LyX sometime to terminate after that error
1. did you edit reconfigure?
2. did you run texhash?
r
- Original Message -
From: Birch Browning [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 20, 2001 8:51 PM
Subject: APA Document Class
Unless I've totally lost my mind while working on a dissertation, didn't
the
Only if the letter X stands for chi like in TeX (the X in TeX is not
'x')
One may need to do some background check... Untill then I will call it LyX
like the six(th sense)!
R
- Original Message -
From: Kent Kostuk [EMAIL PROTECTED]
To: LyX [EMAIL PROTECTED]
Sent: Saturday, August 25, 2001
Thanks for the nice discussion, and the point of view.
I have always had the following point (English point of view though:)
I like lyks (sounds nice and man on the street may ask: What's Lyks??)
I like lyke (I like like... --umm did I stutter..? Man on the street
won't get much of what I say,
Use package listings... Here is an example file to include some Matlab code.
It works for C and many other languages.
On Friday 05 October 2001 07:04, Ben Logan wrote:
Hi,
I'm helping write a book (http://opencbp.sourceforge.net) in LyX, and
we need to include examples of C source code.
: Dekel Tsur [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]; LyX users [EMAIL PROTECTED]
Sent: Tuesday, October 23, 2001 2:04 PM
Subject: Re: bibtopic
On Fri, Oct 19, 2001 at 10:43:40AM -0500, Remzi Seker wrote:
Hi,
I am using lyx.1.1.6f3, and I was trying to make up my resume so
try this:
title here
\pagenumbering{roman}
\addcontentsline{toc}{section}{ABSTRACT}
\begin{center}ABSTRACT \end{center}
abstract here
\newpage
\renewcommand{\contentsname}{CONTENTS}
Table of Contents
\newpage
\addcontentsline{toc}{section}{LIST OF FIGURES}
Lyx 1.1.6fix3 It seems to be a problem with the display formula. When I try
to put the upper and lower limits of a sum, it does it like the inline
formula does. Not exactly above the sum
Any idea?
Remzi
Thanks Nick,
but it doesn't seem to work. Here is an example file attached... I used
display formula before, I wonder if this is a bug or I am doing something
wrong.
Thanks
Remzi
On Wednesday 07 November 2001 18:55, Nick Burgan wrote:
Remzi,
You can toggle between the
saying: When you are in hurry, sit down and relax ;)
Cheers
Remzi
- Original Message -
From: Dekel Tsur [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]; Lyx Users [EMAIL PROTECTED]
Sent: Monday, November 12, 2001 7:01 AM
Subject: Re: Display formula problem
On Mon, Nov 12, 2001 at 03
Hi,
I created an outline and put the commands \date{} and \thispagestyle{empty}
and the dvi is allright. Then, if I make pdf file by using pdflatex, the date
and page number are there. If I make pdf without pdflatex, then I don't have
the date and page number appearing.
Any idea what's
I need to prepare my resume in LyX, but I want the publications appear in
IEEE style. I know how to include a bibtex file and also put the style, but
how I am going to have it listed classified, such as
Journal Papers
Conference Papers
Technical Reports
Thanks in advance
Remzi
}
-
- Original Message -
From: Jeff Hornsberger [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, October 14, 2001 8:53 PM
Subject: Re: Paper style book class
Hmm, I don't see any options there for the max sectioning level. I
Trying to install fix 4 from the RPM (Mankrake 8.1), the installation can not
complete because libstdc++-libc6.1-2.so.3 is needed.
How ever... I seem to have libstdc++-libc6.1-2.so.3, probably more?
$ locate libstdc++-libc6.
/usr/lib/libstdc++-libc6.1-1.so.2
/usr/lib/libstdc++-libc6.2-2.so.3
:
Jose == Jose Abilio Oliveira Matos [EMAIL PROTECTED]
writes:
Jose On Monday 14 January 2002 14:51, Remzi Seker wrote:
Trying to install fix 4 from the RPM (Mankrake 8.1), the
installation can not complete because libstdc++-libc6.1-2.so.3 is
needed. How ever... I seem to have
Hi,
How can I have the Postscript file with Type 1 fonts?
Thanks
Remzi
postscript) and use pdflatex since it uses type 1
fonts by default (i hope this is the case!)
Any simpler solution?
On Friday 25 January 2002 12:17, Dekel Tsur wrote:
On Wed, Jan 23, 2002 at 07:26:45PM -0600, Remzi Seker wrote:
Hi,
How can I have the Postscript file with Type 1 fonts?
Thanks
I did read the section, how ever I still could not get rid of the warnings
when I uploaded the document. I seem to have T3 fonts, but I think those are
because of the figures I have.
On Friday 25 January 2002 14:51, Dekel Tsur wrote:
On Fri, Jan 25, 2002 at 12:46:48PM -0600, Remzi Seker wrote
I created some of the figures in Xfig. However most of my figures were
created in Matlab on MS Windows. I exported the matlab output as eps level 2
images.
I will check the fonts.. Thanks
Remzi
- Original Message -
From: Dekel Tsur [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]; LyX
I can not seem to find IEEETran under layoutdocumentClass.
Moreover, if I do FileNew from Template and open up the IEEETran template,
Lyx gives error.
I located IEEETran.layout under /usr/share/lyx/layouts.
Any idea what's wrong? I read the Customization (chap 6.) but that is to add
classes,
done all those before I e-mailed...
- Original Message -
From: Simon G Hill [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, January 29, 2002 7:36 PM
Subject: Re: IEEETran
On 29 Jan 2002, at 18:45, Remzi Seker wrote:
I can not seem to find
Just as it occured to me last night...
Thanks Tuukka!
- Original Message -
From: Tuukka Toivonen [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, January 30, 2002 2:20 AM
Subject: Re: IEEETran
On Tue, 29 Jan 2002, Remzi Seker wrote:
I can
Hi,
I got a document from a colleague and interestingly enough the tables are
numbered like 1.2, 1.4, 1.6 instead of 1.1, 1.2, 1.3, etc...
I checked the preamble but there is no \newcommand, or \renewcommand
contained. The document was written in Lyx1.1.6fix4 and koma-script report
class.
Not in between but both tables seem to be long table
- Original Message -
From: Herbert Voss [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, February 01, 2002 9:44 AM
Subject: Re: table numbering
Remzi Seker wrote:
Hi,
I got a document
: Dekel Tsur [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]; LyX users [EMAIL PROTECTED]
Sent: Saturday, February 02, 2002 7:39 AM
Subject: Re: table numbering
On Fri, Feb 01, 2002 at 03:05:35PM -0600, Remzi Seker wrote:
Not in between but both tables seem to be long table
So it seems you
Hi,
I use cite.sty to have citings as [1-5] etc. Everything looks fine in the
dvi, but when I use pdflatex, I have the citing as [1,2,3,4,5]. Does anyone
know why?
Remzi
ps2pdf does the job fine... What's the matter with doing pdflatex from LyX?
On Tuesday 05 February 2002 12:33, Herbert Voss wrote:
Remzi Seker wrote
I use cite.sty to have citings as [1-5] etc. Everything looks fine in the
dvi, but when I use pdflatex, I have the citing as [1,2,3,4,5
So incompatibility and bugs are like discoveries. You only uncover them when
you are actually trying to work ;-) Thanks
Remzi
- Original Message -
From: Herbert Voss [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, February 05, 2002 1:33 PM
Subject
Hi
I am writing a paper using koma-script. I need to have the header for title
page by \titlehead start at 1.5 cm from top of the page. The regular top
margin for the paper is 2.5 cm. I tried to move it with vspace but it doesn't
work. Any idea?
Remzi
That's it! Thanks Noel!
Remzi
On Tuesday 05 February 2002 20:55, Noel Beaney wrote:
Hi Remzi,
Have you tried:
\setlength{\headheight}{-1cm}
Noel.
On Wed, 6 Feb 2002 07:48, Remzi Seker wrote:
Hi
I am writing a paper using koma-script. I need to have the header for
title page
Hi, I am getting ready to submit a paper.. but one of my figures needs to be
alittle larger.. What I want is like this:
column 1 colum2
---
figure (expanding to both columns)
---
column 1 colum2
I couldn't do that with multicol package...
I tried to download the example files by Herbert, but
Are you talking about wide figure float? When I do that the figure is put on
an empty page at the end of the document. How can I prevent that?
Thanks
Remzi
On Friday 08 February 2002 00:48, Herbert Voss wrote:
Remzi Seker wrote:
Hi, I am getting ready to submit a paper.. but one of my
\renewcommand\bibname{}
should do
On Friday 08 February 2002 09:26, Sarah Mount wrote:
I want to have a list of references without the References section
heading at the top. Any ideas?
Many thanks,
Sarah
Hi
I have two questions (the attached file is in lyx-1.1.6fix4)
In the example file, it will use scriptstyle only for the first element of
the column and row that I use for labeling. What am I doing wrong?
Also, can I have some of the elements of the first column aligned to right
and some
Sorry I forgot to mention this:
If I go ahead and type \scriptstyle{v_2} etc.. the dvi will look fine. I save
the file, open it again, but I have the same problem. Only the first element
will seem to be in scriptstyle...
Thanks
Remzi
Thanks alot to you all who helped. Everything is smooth now!
Remzi
On Thursday 14 February 2002 03:31, Andre Poenitz wrote:
On Wed, Feb 13, 2002 at 06:03:22PM -0600, Remzi Seker wrote:
If I go ahead and type \scriptstyle{v_2} etc.. the dvi will look fine. I
save the file, open it again
Thanks!!
On Sunday 31 March 2002 14:45, Renaud MICHEL wrote:
Le Dimanche 31 Mars 2002 21:15, vous avez écrit :
Hi,
I have a multiline equation. How can I cross-reference inside the
equation, such as:
x=y+5 by equation 1.2
z=t+r
...
I tried tusing a table, but then I
make sure you are not useing the fancy page style
- Original Message -
From: Guru - [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, April 01, 2002 7:44 PM
Subject: in lyx, Class article, how do I remove the heading at the top of
the page
This is probably a simple question,
As the theorems, lemmas, etc goes I am using ntheorem package (slightly
modified for the dissertation purposes) and I always have them following one
another, even in FoilTex.. I didn't have any problem.
On Thursday 04 April 2002 07:42, Guenter Milde wrote:
Actually, this is more for the
Is there a workaround for generating the nomenclature without exporting the
lyx file into latex? As I followed from some discussiong exporting to latex,
and then back to the lyx resulted in some problems. LyX 1.2 may be?
Regards,
Remzi
Thanks alot Herbert.
I managed to get it work. Now here is the question... I need to define
several nomenclatures, practically one for each chapter (it is a large
document and I am running out of symbols.) Any idea how I can get that one
done?
Thanks
Remzi
Herbert,
Here is your lyx file, modified to divide nomenclature into 6 sections or
less. The user can improve it by playing with the preamble.
Remzi
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\begin_preamble
%usepackage{hyperref}
Hi,
I was using koma-script and had the latex preamble so that chapters would
not come out with the word chapter. Since I upgraded to lyx 1.2 i have the
word chapter appearing. How can I get rid of it (I tried the hint on
Herb's site given for koma classes, didn't work)?
Thanks
Remzi
=Matlab,breaklines]{#1}
\vspace{1ex}%
}
On Saturday 01 June 2002 14:49, Herbert Voss wrote:
Remzi Seker wrote:
I was using koma-script and had the latex preamble so that chapters would
not come out with the word chapter. Since I upgraded to lyx 1.2 i have
the word chapter appearing. How can
enter them manually in the
TOC.
This upgrade has been a headache
thanks
On Monday 03 June 2002 09:05, Herbert Voss wrote:
Remzi Seker wrote:
I tried that before I cried for help :-) but it didn't work. let me paste
the preamble in here:
\usepackage{sectsty}
\chapterfont
I have a longtable that is too wide for the page. When I click on the rotate
90 deg. box I get errors... Any idea?
#LyX 1.2 created this file. For more info see http://www.lyx.org/
\lyxformat 220
\textclass article
\language american
\inputencoding auto
\fontscheme default
\graphics default
I have a document with eps images in it and when I want to create the pdf by
using the pdflatex option, it seems like everything works fine, however in
the generated pdf I don't see the images. I can locate the jpg version fo
those images under the temp folder though. If I move those files to
is fine, otherwise it doesn't work.
- Original Message -
From: Herbert Voss [EMAIL PROTECTED]
To: Remzi Seker [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, July 02, 2002 9:06 AM
Subject: Re: pdflatex
Remzi Seker wrote:
I have a document with eps images in it and when I want
Befroe lyx 1.2 the figure was automatically centered inside the float... Now
it doesn't. Did you guys put a switch somewhere or something? or I have to
\begin{center}
\end{center}
all the time?
Thanks \{endmail} ;)
Hi,
I need to have my chapter, section, subsection titles formatted together with
their numbers. I have the titles formatted with the help of Dekel and
Herbert, however the numbers are not really as I want. Such that
1.1 THIS IS A SECTION
the number 1.1 is bold and larger than the title
Hi,
The graduate school changed the style guideline (I better graduate before
they do this again!) Anyway it looks like I need to tune my preamble again.
In the preamble I have:
\usepackage{sectsty}
\chapterfont{\normalsize\mdseries\centering}
\sectionfont{\normalsize\mdseries\centering}
Hi
Q1:
In the TOC I need:
Page
Item1.1
Item2 2
How can I get the word Page in TOC, above the page numbers?
Q2:
In the LOT I need:
TablePage
Thanks Herbert... Another question though... How can I indent my
subsubsections in the text by an amount of .5 in?
I need the text start after the subsubsection title (no break and the
text should not be italic although the title is). How can I achieve this?
\renewcommand\subsubsection{%
Hi
I am having problems with the seminar style. It simply doesn't run. Can
anyone send me a working example file so I can try and troubleshoot?
Thanks
Remzi
I am using koma-script book class.
When I set the page margins, such as top and bottom 1 inch, I get margins
longer than that. The page style is chosen as plain. How can I get that
accomplished? The margins I get from the side of the paper to the text is
around 1.8 inches...
Is there a way
1 - 100 of 448 matches
Mail list logo
