.
Quite a few linux programs can export into xfig's native format, so it should
be no problem.
Hope it helps,
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web
like a seperate title page? I'm doing a bit of a hack right
now with a ton of line breaks, but it seems like there should be a
better solution which perfectly centers it...
--
-
Ing. Vaclav Smidl, Ph.D.tel
me only one
appendix. How can I change this? I use Lyx 1.3.4.
Regards Susanne
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl
On Friday 12 May 2006 15:19, Pol wrote:
As i try to export my doc as latex, a popup ask me if i want to
overwrite pictures (eps format, in my case). Replying 'overwrite all'
lead to correct completion, but why should pictures be re-created?
When the 'document-settings' panel is open, the
-1.4.2_1.4.2-1_i386.deb) make
sure that the standard dapper lyx packages are not installed (there are
several).
I use it to write papers and it works well.
Richard Kleeman
--
-
Ing. Vaclav Smidl, Ph.D.tel
differences on the same line, causing
conflicts. You have to go through your files manually to correct this.
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web
!
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Tuesday 27 May 2008, Lukáš Oliva wrote:
Hi all,
I want to write thesis in lyx but my faculty uses quite complicated
first section with images, legal note etc. I wanted to fill it in
openoffice and export it to pdf and insert to LyX. I was able to do it
as image, nevertheless I have two
Hi Wolfgang,
I also prefer having the fontsize in figures equal to that of the surrounding
text.
If the special flag was set you encountered a bug, either in xfig,
fig2dev or in LyX. Otherwise just set the flag, and the text should be
typeset by LaTeX.
How does xfig find out the size and
On Wednesday 18 October 2006 4:53 pm, Wolfgang Engelmann wrote:
If I use
\usepackage{hyperref}
in the preamble I get errors:
Paragraph ended before [EMAIL PROTECTED] was complete.
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
#% Do not delete the line below; configure depends on this
# \DeclareLaTeXClass
December 2006 9:03 am
From: Van Zyl, Wiehann, Mnr [EMAIL PROTECTED] [EMAIL PROTECTED]
To: Vaclav Smidl [EMAIL PROTECTED]
Hi
I downloaded and installed MikTex on Windows XP. After that I downloaded the
basic installer for Lyx 1.4 and had basically necessary components installed
as indicated
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Tuesday 19 December 2006 8:05 pm, John Hughes wrote:
Hi,
I'm a little new to this, so please be patient with me. I'm trying to
use a BibTeX database to organise my references. The database seems to
work fine and I can insert a BibTeX reference list into my document
and use it to put
Vaclav: I looked under MenuToolsPreferencesPaths, but I can't see
anything like lyx_tmpdir? or lyx_tmpbuf???.
In, MenuToolsPreferencesPaths is an entry Temporary directory.
This directory is different in different systems, that is why I wanted you to
see where is yours. On linux, my
On Wednesday 20 December 2006 10:20 am, you wrote:
Thanks. The file says this:
This is BibTeX, Version 0.99cThe top-level auxiliary file: newfile1.aux
White space in argument---line 3 of file newfile1.aux
: \bibstyle{C:/Documents
: and Settings/john/My
:
On Wednesday 14 February 2007, Andrew Corrigan wrote:
I made packages for ubuntu edgy with checkinstall:
http://cds.gmu.edu/~acorriga/files/lyx_1.4.4-1_amd64.deb
http://cds.gmu.edu/~acorriga/files/lyx_1.4.4-1_i386.deb
Note, it's not a fully functional package. It just saves you the
trouble
-
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Monday 12 March 2007, Urtzi Jauregi wrote:
On Monday 12 March 2007 13:04:10 Vaclav Smidl wrote:
Hi Urtzi,
I assume that you are using LyX on Windows, right?
Sorry Vaclav, I forgot to give my system info. I'm using LyX 1.4.3 on
Ubuntu Linux 6.10.
The encoding of the LyX
Hi,
When pdflatex converts *.eps files to pdf I get errors that these figures
can't be converted and are not shown in the final pdf. When .ps files get
converted, their boundingboxes are ignored so figures are not displayed
properly.
This is a sign of corrupted eps files.
Missing bounding
Hi,
I have been using LyX on windows XP since a while now and i am trying
to move to Linux. I have not tried to install LyX on Linux yet (I am
sorry but i already know that it won't be easy, I already tried once
with no success) but my question is different now.
On ubuntu it should be as
*** On ubuntu it should be as easy as typing
$ apt-get install lyx
on the command line, or selecting lyx in synaptic and pressing apply
button. (assuming that you are connected to the internet)
I'll give it a try, but LyX is not on the Synaptic manager, as far as
I can see (on Ubuntu
On Thu October 8 2009 17:50:26 Pavel Sanda wrote:
hi,
i have small question for people using lyx + subversion. i'm thinking about
using some svn syntax from version =1.5 for new lyx commands. how big is
the crowd of people still using svn 1.4 or in other words could you drop
me version
On Tuesday 08 June 2004 08:25, Matthew McKay wrote:
Hey,
I am trying to place images inside of a table, however whenever I do so
the text in the other columns always starts in line with the bottom of the
image. I have tried placing the image inside a float and then into a cell
but
It depends on the class of your document.
Layout Document Document class
If you pick e.g. article (AMS), theorems and lemmas will be accessible in
the toolbar, (in place of Standard)
Vasek
On Friday 18 June 2004 10:22, Eric Delevaux wrote:
Hello
I've just installed lyx and i don't
Strange.
Can you send a bit more info on your system?
Distro, versions: LyX, Xserver, QT,
Also, do you see these letters in any other application? (font cmmi10)
E.g. in kword: Insert Special Character.
Vasek
On Monday 21 June 2004 16:53, Miki Dovrat wrote:
I have tried to post this and it
I do see the font cmmi10 in other applications just fine,
even \Gamma and \Psi?
and in lyx
just the \Gamma and \Psi have problems, it is strange indeed.
do you use any locale settings?
if
$ export LC_ALL=EN_US; lyx
does not help, then, I have no idea...
Vasek
I do not know. Possibly you can use a minipage for that.
Again, I'll have a look at this method as well.
It works, see attached example.
You need to set the column width if you want the minipage width be
a % of the column, and to get a proper LyX layout: compare col 1 and 2.
When you
When you fix the column width, each cell is set as a \parbox, so there is
no need to use minipage. (see attachment) However, the resulting .ps is
slightly different (extra vspace at the end of the second cell)...
I don't see any \parbox in the latex export of the example, but
On Wednesday 21 July 2004 12:31, Herbert Voss wrote:
Vaclav Smidl wrote:
My point was that if you specify the width of a column in a table, you
can insert the same stuff as in parbox.
the behaviour of footnotes is different and the vertival space
for the first line also.
I agree
Have you tried nesting?
Alt-p - (right arrow)
Vasek
On Thursday 22 July 2004 15:03, Jiri palecek wrote:
Hi all
I have a small question. How can I make a theorem (in AMS article) that
contains a
list or numbered list like this:
Theorem 1: These claims are equivalent:
1. first
2.
Hi,
I would use short-titles for this. Though the name suggest its use for titles
it also works for the captions.
At the beginning of each caption do:InsertShort Title
It gives you an [opt] inset. Write the caption without references there and it
will be used in the List of Figures instead
Hi Jack,
which tex distribution do you use?
For tetex (default linux option) you should copy these files to:
~/texmf/tex/latex
and run
texhash
in the command line.
For mixtex (windows):
I guess (not using it...) the directory is c:\localtex or similar.
Then you should run something like:
Hi,
I am happily running LyX on linux. Recently, I have installed Ruurd's win32
port for my colleague. The installation was smooth and lyx is running as it
should.
However, there is one issue I can not get rid of: the characters for \sum and
\int are displayed much higher than they should (as
On Thursday 21 October 2004 13:28, Angus Leeming wrote:
Vaclav Smidl wrote:
Hi,
I am happily running LyX on linux. Recently, I have installed Ruurd's
win32 port for my colleague. The installation was smooth and lyx is
running as it should.
However, there is one issue I can not get rid
Dave,
there are some options mentioned on:
http://wiki.lyx.org/pmwiki.php/Examples/CV
I am happily using option #1: Christian Ridderstrm's CV - academic format
Vasek
On Friday 29 October 2004 20:14, Dave Augustus wrote:
I am investigating options with using Lyx as a platform for developing
Hi Paul,
I have no personal experiece (Matlab is available in my institution),
If you have kde or qt, you can try:
http://soft.proindependent.com/qtiplot.html
http://labplot.sourceforge.net/
both should be able to produce eps, the latter uses pstoedit to produce .fig
files.
Vasek
On
On Wednesday 03 November 2004 20:45, Paul Smith wrote:
Dear All
I am looking for a command similar to \hfill to use inside math mode.
In truth, I am wanting to have a single line with several equations
equally separated.
I think the AMS align environment does that, but the line has just one
Hi Jane,
thanks for the patch, it works beautifully.
I vote for its inclusion into 1.3.6cvs.
Vasek
On Tuesday 16 November 2004 19:20, Jane McKean wrote:
OK. I think I've posted the two files here:
http://wiki.lyx.org/pmwiki.php/Tips/ChangeTrackingLyx1-3-2
Hope this helps.
--jane
Our policy is to avoid any change in stable releases that would change
the file format. All 1.3.x releases read and write the same files.
Thanks for explanation.
This patch has been applied to 1.4.0cvs, but due to the numerous
changes in LyX internal they are now non-functionnal, to such
Stephen,
LyX and LaTeX are two different projects. In fact LyX is a frontend to LaTeX.
First, you have to decide which one you want to use:
Option 1: LyX
run lyx (e.g. from your console)
follow HelpTutorial in the menu
Option 2: latex
read
!
Is there a way to make LyX replace my commands as well, as it does with
the standard LaTeX ones?
Thanks for your suggestions
D.
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute
\bind KP_1 self-insert 1
I am getting always 1,
If I use:
\bind KP_1 self-insert 1
\bind 1 self-insert x
I am getting always x.
Any thoughts, workarounds?
Thanks,
Vasek
--
-
Ing. Vaclav Smidl, Ph.D
think is to look for a proper windows keyboard layout.
Vasek
On Thursday 10 February 2005 08:31, Eric S Fraga wrote:
On Wed, Feb 09, 2005 at 07:54:02PM +0100, Vaclav Smidl wrote:
I am trying to modify some key binding files to get the following:
if I press regular 1 insert x
On Thursday 10 February 2005 11:30, G. Milde wrote:
On 9.02.05, Vaclav Smidl wrote:
If I use:
\bind 1 self-insert x
\bind KP_1 self-insert 1
I am getting always 1,
If I use:
\bind KP_1 self-insert 1
\bind 1 self-insert x
I am getting always x.
Just a guess. Did you
,
Anyone use laprint, a matlab function, successfully in lyx?
Richard
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://www.utia.cas.cz/AS/smidl
not need graphicp, change it to graphicx, it should also
work.
What happens if you go to /tmp and run:
latex pcttmp.tex
manually?
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department
! LaTeX Error: File `mono-pre.tex' not found.
Oh, sorry, I did not noticed that.
It is a file with my personal newcommands. :-).
Remove it or replace with your own...
Best,
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://www.utia.cas.cz/AS/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
preferences options are being read and
you have only one preferences file.
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://www.utia.cas.cz/AS/smidl
and superscripts. Does anybody know how to do that in a
nice way?
Thanks for your insights,
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http
Hi,
I am having troubles with ERT.
LyX exports any NL (newline) character in TeX insets as TWO NL characters in
.tex file. It is interpreted as \par by LaTeX.
It means that any commands that does not allow \par have to be written in one
runaway line. It significantly decreases readability.
Is
Thanks to all for suggestions.
C-Enter works fine at the moment but I would vote for solution
ERT behaves like text editor as suggested in the bug report.
Please read bug 698 http://bugzilla.lyx.org/show_bug.cgi?id=698 do you
think that it refers to the same problem?
Vasek
Hi,
I have to write an article using elsart.cls. Is there a LyX layout file for
this class?
There is a few notes on the web about elsart.layout but it is not part of LyX
distro and I can not find it in any contrib directory.
Thanks,
Vasek
,
Also, have a look at
http://www.mail-archive.com/[EMAIL PROTECTED]/msg52858.html
for a patch to 1.3.0 that is the latest version of elsart.
Rod
On Tue, 25 Feb 2003, I Wayan Warmada wrote:
On Tue, 25 Feb 2003, Vaclav Smidl wrote:
| I have to write an article using elsart.cls
of the Elsevier instructions. The second example
uses a different format.
I've attached the tex output, with a space between the first two authors,
and one betweent the second and last. The spacing in the dvi seems the
same.
Rod
On Thu, 27 Feb 2003, Vaclav Smidl wrote:
Hi
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use StandartInTitle for latex inset with \author, etc.
It is probably not nice and elegant, but it
Hi,
I am using lyx for some years now, but I started to use math-macros quite
recently. However, as far as I know it always inserts \newcommand even if the
macro already exist. Is there any switch to use \renewcommand instead?
I found, that ERT line:
[EMAIL PROTECTED]@[EMAIL PROTECTED]
Have you tried to put your accented characters to:
Edit Preferences Language setting Spellchecker Escape characters ?
(This is the path in QT version, should be fairly similar in xforms)
You need to use correct encoding though.
Best,
Vasek
On Friday 04 of July 2003 14:40, Eduardo Haro
Hi,
Are you using draft option? This is what draft mode does.
Vasek
On Tuesday 25 November 2003 06:55, Jeremy Buchmann wrote:
Hello all,
I am using LyX 1.3.3qt and am having trouble with a figure I made in Dia.
It is an EPS file and displays perfectly in LyX, but doesn't show up in
the
Kudos to you for posting the solution :-) (which I've just added
separately to the FAQ:
http://wiki.lyx.org/pmwiki.php/FAQ/Unsorted#mathSymbolsNotShown
/Christian
Hi,
I am affraid it is a bit hidden in Unsorted or even LyX and QT.
I was recently asking the very same question.
(I
It depends what you want to write. You should specify your Document class:
Menu: Layout Document Document class
For article, the first page is usually numbered.
For report, the first page is not numbered (if you have assigned title
already). The second one starts from 1, which is usually OK.
As far as I know, there is no standard macro for this.
(I guess in some fonts it is character 228).
However, I usually use:
\newcommand\degree{\ensuremath{^{\circ}}}
in preamble, and then \degree{} in ERT in text.
Vasek
On Saturday 14 of February 2004 15:58, Maria Torres wrote:
How do I
It looks more like a Latex problem to me. What document class and packages are
you using?
Metrics for ecbx1440 are not available on my tetex 2.0.2 either.
None of my classes have ever asked for them.
Metrics for ecbx2074 are in tetex-extra package for debian.
Do you have these fonts installed?
hi,
thanx for your reply. what i have from my university is 4 style files and
some sample tex files to be used as a formatting template for the thesis.
so pls tell me how do all i use the style files within lyx to create my
thesis. thanx,
psfig.sty - tables styles
graphicx.sty - figure
Hi,
i use xfig and want to export latex-figures oder ps/latex -figures and
want them in my lyx-file. (i use xfig to draw mathematical diagrams) why
latex-figures? in my diagrams i use blackboard bold, fraktur and mathcal
fonts and this is not supported in xfig (without using -specialtext and
try any of these:
http://wiki.lyx.org/pmwiki.php/LyX/Troubleshooting
On Friday 12 of March 2004 15:41, Robert Neumann wrote:
Hello,
I recently changed from Lyx 1.20 to 1.30. Lyx 1.30 seems to print rather
the latex code like \Rightarrow or cdot on the screen instead of =
or the dot.
I
Hi,
an example file with two solutions is attached.
You have to use ERT in both cases.
The second one is better but it does not look nice in LyX...
Vasek
On Tuesday 04 May 2004 16:29, Rob S wrote:
Dear list
I would like to use a numbered list (enumerate environment); but with
each number
Are you talking about horizontal or vertical size?
If horizontal, you can adjust the width of each column in Table settings of
the dialog you get when right-clicking on the table.
If vertical, longtable is what are you looking for. (it is an extra tab in
the same dialog). It splits the table in
.
Quite a few linux programs can export into xfig's native format, so it should
be no problem.
Hope it helps,
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web
like a seperate title page? I'm doing a bit of a hack right
now with a ton of line breaks, but it seems like there should be a
better solution which perfectly centers it...
--
-
Ing. Vaclav Smidl, Ph.D.tel
me only one
appendix. How can I change this? I use Lyx 1.3.4.
Regards Susanne
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl
On Friday 12 May 2006 15:19, Pol wrote:
As i try to export my doc as latex, a popup ask me if i want to
overwrite pictures (eps format, in my case). Replying 'overwrite all'
lead to correct completion, but why should pictures be re-created?
When the 'document-settings' panel is open, the
-1.4.2_1.4.2-1_i386.deb) make
sure that the standard dapper lyx packages are not installed (there are
several).
I use it to write papers and it works well.
Richard Kleeman
--
-
Ing. Vaclav Smidl, Ph.D.tel
differences on the same line, causing
conflicts. You have to go through your files manually to correct this.
Vasek
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web
!
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Tuesday 27 May 2008, Lukáš Oliva wrote:
Hi all,
I want to write thesis in lyx but my faculty uses quite complicated
first section with images, legal note etc. I wanted to fill it in
openoffice and export it to pdf and insert to LyX. I was able to do it
as image, nevertheless I have two
Hi Wolfgang,
I also prefer having the fontsize in figures equal to that of the surrounding
text.
If the special flag was set you encountered a bug, either in xfig,
fig2dev or in LyX. Otherwise just set the flag, and the text should be
typeset by LaTeX.
How does xfig find out the size and
On Wednesday 18 October 2006 4:53 pm, Wolfgang Engelmann wrote:
If I use
\usepackage{hyperref}
in the preamble I get errors:
Paragraph ended before [EMAIL PROTECTED] was complete.
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
#% Do not delete the line below; configure depends on this
# \DeclareLaTeXClass
December 2006 9:03 am
From: Van Zyl, Wiehann, Mnr [EMAIL PROTECTED] [EMAIL PROTECTED]
To: Vaclav Smidl [EMAIL PROTECTED]
Hi
I downloaded and installed MikTex on Windows XP. After that I downloaded the
basic installer for Lyx 1.4 and had basically necessary components installed
as indicated
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Tuesday 19 December 2006 8:05 pm, John Hughes wrote:
Hi,
I'm a little new to this, so please be patient with me. I'm trying to
use a BibTeX database to organise my references. The database seems to
work fine and I can insert a BibTeX reference list into my document
and use it to put
Vaclav: I looked under MenuToolsPreferencesPaths, but I can't see
anything like lyx_tmpdir? or lyx_tmpbuf???.
In, MenuToolsPreferencesPaths is an entry Temporary directory.
This directory is different in different systems, that is why I wanted you to
see where is yours. On linux, my
On Wednesday 20 December 2006 10:20 am, you wrote:
Thanks. The file says this:
This is BibTeX, Version 0.99cThe top-level auxiliary file: newfile1.aux
White space in argument---line 3 of file newfile1.aux
: \bibstyle{C:/Documents
: and Settings/john/My
:
On Wednesday 14 February 2007, Andrew Corrigan wrote:
I made packages for ubuntu edgy with checkinstall:
http://cds.gmu.edu/~acorriga/files/lyx_1.4.4-1_amd64.deb
http://cds.gmu.edu/~acorriga/files/lyx_1.4.4-1_i386.deb
Note, it's not a fully functional package. It just saves you the
trouble
-
--
-
Ing. Vaclav Smidl, Ph.D.tel: +420 26605 2420
AS department, Institute web: http://staff.utia.cz/smidl/
of Information Theory and Automation, fax: +420 26605 2068
Prague, Czech Republic
On Monday 12 March 2007, Urtzi Jauregi wrote:
On Monday 12 March 2007 13:04:10 Vaclav Smidl wrote:
Hi Urtzi,
I assume that you are using LyX on Windows, right?
Sorry Vaclav, I forgot to give my system info. I'm using LyX 1.4.3 on
Ubuntu Linux 6.10.
The encoding of the LyX
Hi,
When pdflatex converts *.eps files to pdf I get errors that these figures
can't be converted and are not shown in the final pdf. When .ps files get
converted, their boundingboxes are ignored so figures are not displayed
properly.
This is a sign of corrupted eps files.
Missing bounding
Hi,
I have been using LyX on windows XP since a while now and i am trying
to move to Linux. I have not tried to install LyX on Linux yet (I am
sorry but i already know that it won't be easy, I already tried once
with no success) but my question is different now.
On ubuntu it should be as
*** On ubuntu it should be as easy as typing
$ apt-get install lyx
on the command line, or selecting lyx in synaptic and pressing apply
button. (assuming that you are connected to the internet)
I'll give it a try, but LyX is not on the Synaptic manager, as far as
I can see (on Ubuntu
On Thu October 8 2009 17:50:26 Pavel Sanda wrote:
hi,
i have small question for people using lyx + subversion. i'm thinking about
using some svn syntax from version =1.5 for new lyx commands. how big is
the crowd of people still using svn 1.4 or in other words could you drop
me version
On Tuesday 08 June 2004 08:25, Matthew McKay wrote:
Hey,
I am trying to place images inside of a table, however whenever I do so
the text in the other columns always starts in line with the bottom of the
image. I have tried placing the image inside a float and then into a cell
but
It depends on the class of your document.
Layout Document Document class
If you pick e.g. article (AMS), theorems and lemmas will be accessible in
the toolbar, (in place of Standard)
Vasek
On Friday 18 June 2004 10:22, Eric Delevaux wrote:
Hello
I've just installed lyx and i don't
Strange.
Can you send a bit more info on your system?
Distro, versions: LyX, Xserver, QT,
Also, do you see these letters in any other application? (font cmmi10)
E.g. in kword: Insert Special Character.
Vasek
On Monday 21 June 2004 16:53, Miki Dovrat wrote:
I have tried to post this and it
I do see the font cmmi10 in other applications just fine,
even \Gamma and \Psi?
and in lyx
just the \Gamma and \Psi have problems, it is strange indeed.
do you use any locale settings?
if
$ export LC_ALL=EN_US; lyx
does not help, then, I have no idea...
Vasek
I do not know. Possibly you can use a minipage for that.
Again, I'll have a look at this method as well.
It works, see attached example.
You need to set the column width if you want the minipage width be
a % of the column, and to get a proper LyX layout: compare col 1 and 2.
When you
When you fix the column width, each cell is set as a \parbox, so there is
no need to use minipage. (see attachment) However, the resulting .ps is
slightly different (extra vspace at the end of the second cell)...
I don't see any \parbox in the latex export of the example, but
On Wednesday 21 July 2004 12:31, Herbert Voss wrote:
Vaclav Smidl wrote:
My point was that if you specify the width of a column in a table, you
can insert the same stuff as in parbox.
the behaviour of footnotes is different and the vertival space
for the first line also.
I agree
Have you tried nesting?
Alt-p - (right arrow)
Vasek
On Thursday 22 July 2004 15:03, Jiri palecek wrote:
Hi all
I have a small question. How can I make a theorem (in AMS article) that
contains a
list or numbered list like this:
Theorem 1: These claims are equivalent:
1. first
2.
1 - 100 of 207 matches
Mail list logo