Re: Word count statistics
On Mon, Jun 17, 2019 at 6:43 AM Pavel Sanda wrote: > > Hi, > > LyX has currently an issue that the word count statistics does not include > citations. I am unfortunately afraid that there might not be agreement whether > these are proper words or not, depending on the publisher/journal. > > In your experience with different publications, how many words constitute > these? > [1] : 0/1* > (Goldman et al., 1976) : 0/1/4* > > I tend to implement the starred version unless it causes controversy... > Alternatively we could count citation words separately, but I do not like > this solution. > > Pavel In my experience, the word count limit is just a guide to the appropriate length of a paper. Ain't nobody got time to check whether you have 502 words in your abstract or 497. But generally, it will be apparent when you have 750 words and the limit is 500. So, as long as you are sticking to the spirit of the word limit, you don't have to worry about whether your references are counted as 4 words or 5. I've checked the LyX word counter against MS Word/LibreOffice before, and there are always slight differences in the counts, even for a text without references. It all comes down to different views on what a "word" is. Even when you're talking orthographic words (strings with spaces around them), people will have different opinions on certain tricky cases. I really don't think you are ever going to have to duke it out with your editor, though. Also, some journals explicitly exclude references from their word count limit. If they care enough to legislate this, they will usually be clear about it on their submission pages.
Re: Word Count
Is there any way around this? (short of going through the document and deleting the notes? in case of lyx comments export to text file and count the words by eg wc -w file.txt . this wont help you with greyed out text though. In the future perhaps a checkbox in the word-count popup that could toggle between counting or not counting the contents of notes would be a useful addition. not requested for the first time. all patches are welcome :) pavel
Re: Word Count
Is there any way around this? (short of going through the document and deleting the notes? in case of lyx comments export to text file and count the words by eg wc -w file.txt . this wont help you with greyed out text though. In the future perhaps a checkbox in the word-count popup that could toggle between counting or not counting the contents of notes would be a useful addition. not requested for the first time. all patches are welcome :) pavel
Re: Word Count
> Is there any way around this? (short of going through the document and > deleting the notes? in case of lyx comments export to text file and count the words by eg wc -w file.txt . this wont help you with greyed out text though. > In the future perhaps a checkbox in the word-count popup that could > toggle between counting or not counting the contents of notes would be a > useful addition. not requested for the first time. all patches are welcome :) pavel
Re: word count
Thanks for all your responses, though I still think this functionality is still very primitive. Sometimes you do not want to spell check the document, or you just want to count the words in a paragraph/abstract. I would really like to see this feature in forthcoming versions of lyx if possible. Anyway, thanks for your prompt responses. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: Rob Davies [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, July 07, 2003 7:55 PM Subject: Re: word count On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. Spellcheck the article and it will reveal a good guess at the conclusion of said process. -- Rob Davies [EMAIL PROTECTED] 'To converse is one strategy that separates us, from the Apes.'
Re: word count
On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson or B. Franklin or both...)
Re: word count
Andre Poenitz wrote: On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' I don't think he meant primitive as in easy to perform. If I understood correctly, he meant primitive as in a core operation that many people will want to perform on their document. That is as opposed to replacing the word 'picnic' with the german for 'sandwich' and highlighting it in blue, for example. That might well be described as non-primitive :) Cheers, Raphael
Re: word count
Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: Raphael Clifford [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, July 08, 2003 10:39 AM Subject: Re: word count Andre Poenitz wrote: On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' I don't think he meant primitive as in easy to perform. If I understood correctly, he meant primitive as in a core operation that many people will want to perform on their document. That is as opposed to replacing the word 'picnic' with the german for 'sandwich' and highlighting it in blue, for example. That might well be described as non-primitive :) Cheers, Raphael
Re: word count
Alberto Sanchez wrote: Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. If someone were to write a word count feature, something that would make it really nice would be the ability to count words in only one part of a document. Very useful for those which section to I need to cut in order to fit in the maximum wordcount? moments! Robin -- A strategy is still being formulated. Robin Turner IDMYO Bilkent Univeritesi Ankara 06533 Turkey www.bilkent.edu.tr/~robin
Re: word count
Thanks for all your responses, though I still think this functionality is still very primitive. Sometimes you do not want to spell check the document, or you just want to count the words in a paragraph/abstract. I would really like to see this feature in forthcoming versions of lyx if possible. Anyway, thanks for your prompt responses. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: Rob Davies [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, July 07, 2003 7:55 PM Subject: Re: word count On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. Spellcheck the article and it will reveal a good guess at the conclusion of said process. -- Rob Davies [EMAIL PROTECTED] 'To converse is one strategy that separates us, from the Apes.'
Re: word count
On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson or B. Franklin or both...)
Re: word count
Andre Poenitz wrote: On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' I don't think he meant primitive as in easy to perform. If I understood correctly, he meant primitive as in a core operation that many people will want to perform on their document. That is as opposed to replacing the word 'picnic' with the german for 'sandwich' and highlighting it in blue, for example. That might well be described as non-primitive :) Cheers, Raphael
Re: word count
Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: Raphael Clifford [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, July 08, 2003 10:39 AM Subject: Re: word count Andre Poenitz wrote: On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong. Andre' I don't think he meant primitive as in easy to perform. If I understood correctly, he meant primitive as in a core operation that many people will want to perform on their document. That is as opposed to replacing the word 'picnic' with the german for 'sandwich' and highlighting it in blue, for example. That might well be described as non-primitive :) Cheers, Raphael
Re: word count
Alberto Sanchez wrote: Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. If someone were to write a word count feature, something that would make it really nice would be the ability to count words in only one part of a document. Very useful for those which section to I need to cut in order to fit in the maximum wordcount? moments! Robin -- A strategy is still being formulated. Robin Turner IDMYO Bilkent Univeritesi Ankara 06533 Turkey www.bilkent.edu.tr/~robin
Re: word count
Thanks for all your responses, though I still think this functionality is still very primitive. Sometimes you do not want to spell check the document, or you just want to count the words in a paragraph/abstract. I would really like to see this feature in forthcoming versions of lyx if possible. Anyway, thanks for your prompt responses. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: "Rob Davies" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 07, 2003 7:55 PM Subject: Re: word count > On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: > > Hi! > > > > Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. > > Spellcheck the article and it will reveal a good guess at the conclusion > of said process. > -- > Rob Davies > [EMAIL PROTECTED] > > 'To converse is one strategy that separates us, from the Apes.' >
Re: word count
On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: > Thanks for all your responses, though I still think this functionality is > still very primitive. So how many words are in "If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong." Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson or B. Franklin or both...)
Re: word count
Andre Poenitz wrote: On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: Thanks for all your responses, though I still think this functionality is still very primitive. So how many words are in "If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ you're wrong." Andre' I don't think he meant "primitive" as in "easy to perform". If I understood correctly, he meant "primitive" as in "a core operation that many people will want to perform on their document". That is as opposed to "replacing the word 'picnic' with the german for 'sandwich' and highlighting it in blue", for example. That might well be described as "non-primitive" :) Cheers, Raphael
Re: word count
Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. Alberto --- Alberto Sánchez Industrial Control Centre 50 George Street - Level 7 Glasgow, G1 1QE Scotland - UK Tel: +44 (141) 5484202 Fax: +44 (141) 5484203 - Original Message - From: "Raphael Clifford" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 08, 2003 10:39 AM Subject: Re: word count > Andre Poenitz wrote: > > >On Tue, Jul 08, 2003 at 10:16:47AM +0100, Alberto Sanchez wrote: > > > > > >>Thanks for all your responses, though I still think this functionality is > >>still very primitive. > >> > >> > > > >So how many words are in > > > > "If you think the $n^\mathrm{th}$ derivative of $e^x$ is $exp x + sin x$ > > you're wrong." > > > >Andre' > > > > > > > I don't think he meant "primitive" as in "easy to perform". If I > understood correctly, he meant "primitive" as in "a core operation that > many people will want to perform on their document". That is as opposed > to "replacing the word 'picnic' with the german for 'sandwich' and > highlighting it in blue", for example. That might well be described as > "non-primitive" :) > > Cheers, > Raphael > >
Re: word count
Alberto Sanchez wrote: Yep...that is exactly what I meant. As Andre pointed out, the operation of couting words, from a latex point of view, is not easy, but I think this feature is something many people have to do when writting articles, theses or other documents. If someone were to write a word count feature, something that would make it really nice would be the ability to count words in only one part of a document. Very useful for those "which section to I need to cut in order to fit in the maximum wordcount?" moments! Robin -- "A strategy is still being formulated." Robin Turner IDMYO Bilkent Univeritesi Ankara 06533 Turkey www.bilkent.edu.tr/~robin
Re: word count
On Mon, 7 Jul 2003, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. See FAQ, here's an online version: http://ev-en.org/wikis/moin.cgi/LyxFAQ6#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 7 Jul 2003, Christian Ridderström wrote: On Mon, 7 Jul 2003, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. See FAQ, here's an online version: Typo (I'm on Windows/Pine here, can't paste properly). The correct URI should be: http://ev-en.org/wiki/moin.cgi/LyxFAQ6#line51 sigh. /Christian PS. Thanks Raphael for pointing this out. DS -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. Spellcheck the article and it will reveal a good guess at the conclusion of said process. -- Rob Davies [EMAIL PROTECTED] 'To converse is one strategy that separates us, from the Apes.'
Re: word count
On Mon, 7 Jul 2003, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. See FAQ, here's an online version: http://ev-en.org/wikis/moin.cgi/LyxFAQ6#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 7 Jul 2003, Christian Ridderström wrote: On Mon, 7 Jul 2003, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. See FAQ, here's an online version: Typo (I'm on Windows/Pine here, can't paste properly). The correct URI should be: http://ev-en.org/wiki/moin.cgi/LyxFAQ6#line51 sigh. /Christian PS. Thanks Raphael for pointing this out. DS -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: Hi! Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, though it might be a good add-on, and probably not very difficult to implement...I hope. Spellcheck the article and it will reveal a good guess at the conclusion of said process. -- Rob Davies [EMAIL PROTECTED] 'To converse is one strategy that separates us, from the Apes.'
Re: word count
On Mon, 7 Jul 2003, Alberto Sanchez wrote: > Hi! > > Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, > though it might be a good add-on, and probably not very difficult to implement...I > hope. See FAQ, here's an online version: http://ev-en.org/wikis/moin.cgi/LyxFAQ6#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 7 Jul 2003, Christian Ridderström wrote: > On Mon, 7 Jul 2003, Alberto Sanchez wrote: > > > Hi! > > > > Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, > > though it might be a good add-on, and probably not very difficult to implement...I > > hope. > > See FAQ, here's an online > version: Typo (I'm on Windows/Pine here, can't paste properly). The correct URI should be: http://ev-en.org/wiki/moin.cgi/LyxFAQ6#line51 sigh. /Christian PS. Thanks Raphael for pointing this out. DS -- Christian Ridderström http://www.md.kth.se/~chr
Re: word count
On Mon, 2003-07-07 at 19:46, Alberto Sanchez wrote: > Hi! > > Does anybody knows how to count words in Lyx 1.3.2? I have not found this option, > though it might be a good add-on, and probably not very difficult to implement...I > hope. Spellcheck the article and it will reveal a good guess at the conclusion of said process. -- Rob Davies [EMAIL PROTECTED] 'To converse is one strategy that separates us, from the Apes.'
Re: Word count
On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: Word count
Christian == Christian Ridderström [EMAIL PROTECTED] writes: Christian On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose Christian See the FAQ, Christian http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 I do not know how relevant and/or useful it is, but the following package appeared recently on CTAN. JMarc --- From: Jim Hefferon [EMAIL PROTECTED] Subject: New CTAN material: latexcount To: [EMAIL PROTECTED] X-Sent: 2 days, 2 hours, 22 minutes, 9 seconds ago A new package has been installed at the tug.ctan.org node of CTAN and should make its way to your favorite mirror soon. Thanks for the upload, Jim Hefferon [EMAIL PROTECTED] == The following information was provided by our fellow contributor. Name of contribution: latexcount Author's name: P.D. Magnus Location on CTAN: support/misc Summary description: Perl script generates word count of LaTeX documents License type: lppl Announcement text given by the contribution's author: - - -- The latexcount script gives a reasonably accurate count of the number of words in the main text of an article, the number of words in footnotes, and the number of words total. The list of tags that don't get counted can be added to as needed. - - --
Re: Word count
Hi Christian, thank you very much. Jose Christian Ridderström wrote: On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian
Re: Word count
On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: Hi, all is there a way to count words on lyx? Spellcheck. Or Ascii output followed by wc on the file (if it's large)? Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca
Re: Word count
Kenward Vaughan [EMAIL PROTECTED] writes: On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: Hi, all is there a way to count words on lyx? Click File - Export - Custom - Ascii, then supply the command name `wc | xmessage -file -' and you'll get a popup with the line, word, and character counts. -- Ronald Florence www.18james.com
Re: Word count
On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: Word count
Christian == Christian Ridderström [EMAIL PROTECTED] writes: Christian On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose Christian See the FAQ, Christian http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 I do not know how relevant and/or useful it is, but the following package appeared recently on CTAN. JMarc --- From: Jim Hefferon [EMAIL PROTECTED] Subject: New CTAN material: latexcount To: [EMAIL PROTECTED] X-Sent: 2 days, 2 hours, 22 minutes, 9 seconds ago A new package has been installed at the tug.ctan.org node of CTAN and should make its way to your favorite mirror soon. Thanks for the upload, Jim Hefferon [EMAIL PROTECTED] == The following information was provided by our fellow contributor. Name of contribution: latexcount Author's name: P.D. Magnus Location on CTAN: support/misc Summary description: Perl script generates word count of LaTeX documents License type: lppl Announcement text given by the contribution's author: - - -- The latexcount script gives a reasonably accurate count of the number of words in the main text of an article, the number of words in footnotes, and the number of words total. The list of tags that don't get counted can be added to as needed. - - --
Re: Word count
Hi Christian, thank you very much. Jose Christian Ridderström wrote: On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian
Re: Word count
On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: Hi, all is there a way to count words on lyx? Spellcheck. Or Ascii output followed by wc on the file (if it's large)? Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca
Re: Word count
Kenward Vaughan [EMAIL PROTECTED] writes: On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: Hi, all is there a way to count words on lyx? Click File - Export - Custom - Ascii, then supply the command name `wc | xmessage -file -' and you'll get a popup with the line, word, and character counts. -- Ronald Florence www.18james.com
Re: Word count
On Mon, 10 Mar 2003, Jose wrote: > Hi, all is there a way to count words on lyx? > > thanks > > Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: Word count
> "Christian" == Christian Ridderström <[EMAIL PROTECTED]> writes: Christian> On Mon, 10 Mar 2003, Jose wrote: >> Hi, all is there a way to count words on lyx? >> >> thanks >> >> Jose Christian> See the FAQ, Christian> http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 I do not know how relevant and/or useful it is, but the following package appeared recently on CTAN. JMarc --- From: Jim Hefferon <[EMAIL PROTECTED]> Subject: New CTAN material: latexcount To: [EMAIL PROTECTED] X-Sent: 2 days, 2 hours, 22 minutes, 9 seconds ago A new package has been installed at the tug.ctan.org node of CTAN and should make its way to your favorite mirror soon. Thanks for the upload, Jim Hefferon [EMAIL PROTECTED] == The following information was provided by our fellow contributor. Name of contribution: latexcount Author's name: P.D. Magnus Location on CTAN: support/misc Summary description: Perl script generates word count of LaTeX documents License type: lppl Announcement text given by the contribution's author: - - -- The latexcount script gives a reasonably accurate count of the number of words in the main text of an article, the number of words in footnotes, and the number of words total. The list of tags that don't get counted can be added to as needed. - - --
Re: Word count
Hi Christian, thank you very much. Jose Christian Ridderström wrote: On Mon, 10 Mar 2003, Jose wrote: Hi, all is there a way to count words on lyx? thanks Jose See the FAQ, http://ev-en.org/wiki/moin.cgi/LyxFAQ?action=show#line51 /Christian
Re: Word count
On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: > Hi, all is there a way to count words on lyx? Spellcheck. Or Ascii output followed by wc on the file (if it's large)? Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca
Re: Word count
Kenward Vaughan <[EMAIL PROTECTED]> writes: > On Mon, Mar 10, 2003 at 08:14:57AM -0600, Jose wrote: > > Hi, all is there a way to count words on lyx? Click File -> Export -> Custom -> Ascii, then supply the command name `wc | xmessage -file -' and you'll get a popup with the line, word, and character counts. -- Ronald Florence www.18james.com
Re: Word count ;-)
On Tuesday 14 May 2002 09:52, Martin Vermeer wrote: Read the comments here about word count in OpenOffice:: http://linuxtoday.com/news_story.php3?ltsn=2002-05-13-014-26-RV-DT -SWtbovrmode=1#talkback_area We have a word count function too, somewhat hidden: custom export to ASCII defining the command as wc -w. The spellcheck also works as a word count. Should this be provided more explicitly? Yes, if only to save time and prove to the skeptics that LyX can count! Robin -- Bravo Epictetus! - Epictetus Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin
Re: Word count ;-)
On Tuesday 14 May 2002 09:52, Martin Vermeer wrote: Read the comments here about word count in OpenOffice:: http://linuxtoday.com/news_story.php3?ltsn=2002-05-13-014-26-RV-DT -SWtbovrmode=1#talkback_area We have a word count function too, somewhat hidden: custom export to ASCII defining the command as wc -w. The spellcheck also works as a word count. Should this be provided more explicitly? Yes, if only to save time and prove to the skeptics that LyX can count! Robin -- Bravo Epictetus! - Epictetus Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin
Re: Word count ;-)
On Tuesday 14 May 2002 09:52, Martin Vermeer wrote: > Read the comments here about word count in OpenOffice:: > > http://linuxtoday.com/news_story.php3?ltsn=2002-05-13-014-26-RV-DT >-SW=1#talkback_area > > We have a word count function too, somewhat hidden: > custom export to ASCII defining the command as wc -w. The spellcheck also works as a word count. > Should this be provided more explicitly? Yes, if only to save time and prove to the skeptics that LyX can count! Robin -- "Bravo Epictetus!" - Epictetus Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin
RE: word count
Kayvan A Sylvan wrote: On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Of course. It's detex, not deLyX. Proper operation would be to export to LaTeX and then run detex. Lyx 1.1.6 has the operation File-export-ASCII. Why not do that and then use wc on the resulting file? Joe
RE: word count
On Mon, 6 May 2002, Reuter, Joseph wrote: Kayvan A Sylvan wrote: Of course. It's detex, not deLyX. Lyx 1.1.6 has the operation File-export-ASCII. Why not do that and then use wc on the resulting file? OK: This would be perfect if you could pipe the output from lyx to wc. I prefer pipes to files for operations like this and I don't find a flag to force output to standard output. So, you have to do something like the following. path, if necessarylyx --export text file.lyx wc flags file.txt rm file.txt If, like me, you have aliased lyx for geometry and to force share a shared color map, you must provide the entire path. The grep approach (which requires some knowledge of the lyx file format) is much faster. However, both are fast and probably fast enough. (The difference is between fractions of a second a couple of seconds on an alpha LX164. YMMV) -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
RE: word count
Kayvan A Sylvan wrote: On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Of course. It's detex, not deLyX. Proper operation would be to export to LaTeX and then run detex. Lyx 1.1.6 has the operation File-export-ASCII. Why not do that and then use wc on the resulting file? Joe
RE: word count
On Mon, 6 May 2002, Reuter, Joseph wrote: Kayvan A Sylvan wrote: Of course. It's detex, not deLyX. Lyx 1.1.6 has the operation File-export-ASCII. Why not do that and then use wc on the resulting file? OK: This would be perfect if you could pipe the output from lyx to wc. I prefer pipes to files for operations like this and I don't find a flag to force output to standard output. So, you have to do something like the following. path, if necessarylyx --export text file.lyx wc flags file.txt rm file.txt If, like me, you have aliased lyx for geometry and to force share a shared color map, you must provide the entire path. The grep approach (which requires some knowledge of the lyx file format) is much faster. However, both are fast and probably fast enough. (The difference is between fractions of a second a couple of seconds on an alpha LX164. YMMV) -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
RE: word count
Kayvan A Sylvan wrote: > > On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: > > > ftp://sunsite.unc.edu/pub/Linux/apps/tex/ > > ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README > > > > (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ > > > > However, this does not do what you want. (My interest was > piqued by Matej > > Cepel's response.) The program strips latex commands and all the '\' > > characters, but does not stip meta information, as required for an > > accurate word count. (Maybe there a command line options > that get that job > > done and maybe it does the right thing with a pure latex > file. But it does > > not do the right thing with a lyx file.) > > Of course. It's detex, not deLyX. > > Proper operation would be to export to LaTeX and then run detex. > Lyx 1.1.6 has the operation File->export->ASCII. Why not do that and then use wc on the resulting file? Joe
RE: word count
On Mon, 6 May 2002, Reuter, Joseph wrote: >Kayvan A Sylvan wrote: >> >> Of course. It's detex, not deLyX. >Lyx 1.1.6 has the operation File->export->ASCII. Why not do that and then >use wc on the resulting file? OK: This would be perfect if you could pipe the output from lyx to wc. I prefer pipes to files for operations like this and I don't find a flag to force output to standard output. So, you have to do something like the following.lyx --export text file.lyx wc file.txt rm file.txt If, like me, you have aliased lyx for geometry and to force share a shared color map, you must provide the entire path. The grep approach (which requires some knowledge of the lyx file format) is much faster. However, both are fast and probably fast enough. (The difference is between fractions of a second a couple of seconds on an alpha LX164. YMMV) -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On Fri, 3 May 2002, R.G.N. Meegama wrote: How can I count the total number of words (including the words in figure captions) in a lyx document ? The spellchecker tells the word count after it's finished. But I don't know if it includes captions etc., try it.
Re: word count
On Fri, 3 May 2002, Tuukka Toivonen wrote: On Fri, 3 May 2002, R.G.N. Meegama wrote: How can I count the total number of words (including the words in figure captions) in a lyx document ? The spellchecker tells the word count after it's finished. But I don't know if it includes captions etc., try it. If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Matej
Re: word count
On Friday 03 May 2002 09:46 am, Matej Cepl wrote: On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? Steve -- _ Steve Litt Author: * Troubleshooting Techniques of the Successful Technologist * Rapid Learning: Secret Weapon of the Successful Technologist http://www.troubleshooters.com/bookstore/ Troubleshooters.Com Webmaster (Legal Disclaimer) Follow these suggestions at your own risk. -
Re: word count
On 3 May, Steve Litt wrote: (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? go to http://www.ctan.org and search for detex. You will get a tarball, which you can then compile (it is really very simple). Matej -- Matej Cepl, [EMAIL PROTECTED] 138 Highland Ave. #10 Somerville, Ma 02143 (617) 623-1488
Re: word count
On Fri, 3 May 2002, Steve Litt wrote: On Friday 03 May 2002 09:46 am, Matej Cepl wrote: On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? Try a latex repository. Google claims 2700 hits on detex+linux. ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Here is the top of the output from a large document I am working on. Clearly useless for your purpose. #LyX 1.1 created this file. For more info see http://www.lyx.org/ 218 book _preamble authordate1-4 1.0 _preamble english latin1 default default default single Default a4 _geometry 0 _amsmath 0 portrait 2 2 -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Of course. It's detex, not deLyX. Proper operation would be to export to LaTeX and then run detex. -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc. | Laura Isabella Sylvan | Katherine Yelena (8/8/89) http://sylvan.com/~kayvan | crown of her husband | Robin Gregory (2/28/92) msg19075/pgp0.pgp Description: PGP signature
Re: word count
On Fri, 3 May 2002, R.G.N. Meegama wrote: How can I count the total number of words (including the words in figure captions) in a lyx document ? The spellchecker tells the word count after it's finished. But I don't know if it includes captions etc., try it.
Re: word count
On Fri, 3 May 2002, Tuukka Toivonen wrote: On Fri, 3 May 2002, R.G.N. Meegama wrote: How can I count the total number of words (including the words in figure captions) in a lyx document ? The spellchecker tells the word count after it's finished. But I don't know if it includes captions etc., try it. If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Matej
Re: word count
On Friday 03 May 2002 09:46 am, Matej Cepl wrote: On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the $1 (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? Steve -- _ Steve Litt Author: * Troubleshooting Techniques of the Successful Technologist * Rapid Learning: Secret Weapon of the Successful Technologist http://www.troubleshooters.com/bookstore/ Troubleshooters.Com Webmaster (Legal Disclaimer) Follow these suggestions at your own risk. -
Re: word count
On 3 May, Steve Litt wrote: (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? go to http://www.ctan.org and search for detex. You will get a tarball, which you can then compile (it is really very simple). Matej -- Matej Cepl, [EMAIL PROTECTED] 138 Highland Ave. #10 Somerville, Ma 02143 (617) 623-1488
Re: word count
On Fri, 3 May 2002, Steve Litt wrote: On Friday 03 May 2002 09:46 am, Matej Cepl wrote: On 3 May, Mark Hansel wrote: If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v [\] $1|grep -v $L yx 1.1 |grep -v ^$ There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Where would one get detex for Linux? Try a latex repository. Google claims 2700 hits on detex+linux. ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Here is the top of the output from a large document I am working on. Clearly useless for your purpose. #LyX 1.1 created this file. For more info see http://www.lyx.org/ 218 book _preamble authordate1-4 1.0 _preamble english latin1 default default default single Default a4 _geometry 0 _amsmath 0 portrait 2 2 -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Of course. It's detex, not deLyX. Proper operation would be to export to LaTeX and then run detex. -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc. | Laura Isabella Sylvan | Katherine Yelena (8/8/89) http://sylvan.com/~kayvan | crown of her husband | Robin Gregory (2/28/92) msg19075/pgp0.pgp Description: PGP signature
Re: word count
On Fri, 3 May 2002, R.G.N. Meegama wrote: >How can I count the total number of words (including the words in >figure captions) in a lyx document ? The spellchecker tells the word count after it's finished. But I don't know if it includes captions etc., try it.
Re: word count
On Fri, 3 May 2002, Tuukka Toivonen wrote: >On Fri, 3 May 2002, R.G.N. Meegama wrote: > >>How can I count the total number of words (including the words in >>figure captions) in a lyx document ? > >The spellchecker tells the word count after it's finished. But I don't know >if it includes captions etc., try it. > If you are using a *nix, you can strip all the lyx and latex lines from the file and pipe the text only to wc. The idea is not mine and appeared on this list about half a year ago. I have the command in a script that is sometimes useful. grep -v "[\]" $1|grep -v "$L yx 1.1" |grep -v "^$" If you understand this, you should be able to figure out what to do with it. Make sure to do the right thing with the "$1" (replace with file name or put it back into a script so the $1 makes sense). If your are using windows, you have my pity. -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On 3 May, Mark Hansel wrote: > If you are using a *nix, you can strip all the lyx and latex > lines from the file and pipe the text only to wc. The idea is > not mine and appeared on this list about half a year ago. I > have the command in a script that is sometimes useful. > > grep -v "[\]" $1|grep -v "$L yx 1.1" |grep -v "^$" > > If you understand this, you should be able to figure out what > to do with it. Make sure to do the right thing with the "$1" > (replace with file name or put it back into a script so the $1 > makes sense). > > If your are using windows, you have my pity. There is a program detex, which does basically the same as above oneliner (only in much more sophisticated manner), so you can do detex docname.tex | wc -w (yes, Virginia, both commands DO exist for both *nix and M$-* systems). Matej
Re: word count
On Friday 03 May 2002 09:46 am, Matej Cepl wrote: > On 3 May, Mark Hansel wrote: > > If you are using a *nix, you can strip all the lyx and latex > > lines from the file and pipe the text only to wc. The idea is > > not mine and appeared on this list about half a year ago. I > > have the command in a script that is sometimes useful. > > > > grep -v "[\]" $1|grep -v "$L yx 1.1" |grep -v "^$" > > > > If you understand this, you should be able to figure out what > > to do with it. Make sure to do the right thing with the "$1" > > (replace with file name or put it back into a script so the $1 > > makes sense). > > > > If your are using windows, you have my pity. > > There is a program detex, which does basically the same as above > oneliner (only in much more sophisticated manner), so you can do > > detex docname.tex | wc -w > > (yes, Virginia, both commands DO exist for both *nix and M$-* > systems). Where would one get detex for Linux? Steve -- _ Steve Litt Author: * Troubleshooting Techniques of the Successful Technologist * Rapid Learning: Secret Weapon of the Successful Technologist http://www.troubleshooters.com/bookstore/ Troubleshooters.Com Webmaster (Legal Disclaimer) Follow these suggestions at your own risk. -
Re: word count
On 3 May, Steve Litt wrote: >> (yes, Virginia, both commands DO exist for both *nix and M$-* >> systems). > > Where would one get detex for Linux? go to http://www.ctan.org and search for detex. You will get a tarball, which you can then compile (it is really very simple). Matej -- Matej Cepl, [EMAIL PROTECTED] 138 Highland Ave. #10 Somerville, Ma 02143 (617) 623-1488
Re: word count
On Fri, 3 May 2002, Steve Litt wrote: >On Friday 03 May 2002 09:46 am, Matej Cepl wrote: >> On 3 May, Mark Hansel wrote: >> > If you are using a *nix, you can strip all the lyx and latex >> > lines from the file and pipe the text only to wc. The idea is >> > not mine and appeared on this list about half a year ago. I >> > have the command in a script that is sometimes useful. >> > >> > grep -v "[\]" $1|grep -v "$L yx 1.1" |grep -v "^$" >> > >> There is a program detex, which does basically the same as above >> oneliner (only in much more sophisticated manner), so you can do >> >> detex docname.tex | wc -w >> >> (yes, Virginia, both commands DO exist for both *nix and M$-* >> systems). > >Where would one get detex for Linux? Try a latex repository. Google claims 2700 hits on detex+linux. ftp://sunsite.unc.edu/pub/Linux/apps/tex/ ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ However, this does not do what you want. (My interest was piqued by Matej Cepel's response.) The program strips latex commands and all the '\' characters, but does not stip meta information, as required for an accurate word count. (Maybe there a command line options that get that job done and maybe it does the right thing with a pure latex file. But it does not do the right thing with a lyx file.) Here is the top of the output from a large document I am working on. Clearly useless for your purpose. #LyX 1.1 created this file. For more info see http://www.lyx.org/ 218 book _preamble authordate1-4 1.0 _preamble english latin1 default default default single Default a4 _geometry 0 _amsmath 0 portrait 2 2 -- Mark Hansel PO Box 41 Minnesota State University Moorhead Moorhead, MN 56563 ph: 218-236-2039 fax: 218-236-2593 [EMAIL PROTECTED] http://wwwcj.mnstate.edu
Re: word count
On Fri, May 03, 2002 at 05:46:38PM -0500, Mark Hansel wrote: > ftp://sunsite.unc.edu/pub/Linux/apps/tex/ > ftp://sunsite.unc.edu/pub/Linux/apps/tex/deTeX-2.6.README > > (tar.gz here): http://www.funet.fi/pub/Linux/util/TeX/ > > However, this does not do what you want. (My interest was piqued by Matej > Cepel's response.) The program strips latex commands and all the '\' > characters, but does not stip meta information, as required for an > accurate word count. (Maybe there a command line options that get that job > done and maybe it does the right thing with a pure latex file. But it does > not do the right thing with a lyx file.) Of course. It's detex, not deLyX. Proper operation would be to export to LaTeX and then run detex. -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc. | Laura Isabella Sylvan | Katherine Yelena (8/8/89) http://sylvan.com/~kayvan | "crown of her husband" | Robin Gregory (2/28/92) msg19075/pgp0.pgp Description: PGP signature
Re: word count
Steve Litt hat gesagt: // Steve Litt wrote: The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Yup, that's right. The small script in my previous mail counts characters, lines and words and it puts a little headline above the outcome, because I alwas forget, which count is which ;) -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
On Saturday 22 September 2001 06:15, Frank Barknecht wrote: Steve Litt hat gesagt: // Steve Litt wrote: The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Yup, that's right. The small script in my previous mail counts characters, lines and words and it puts a little headline above the outcome, because I alwas forget, which count is which ;) Yes, but on further thought I think you might need to subtract the number of lines from the number of characters, because presumably the character count shouldn't include newlines. So in Unix/Linux/BSD subtract the number of lines, and in DOS/Windows subtract double the number of lines (crlf). Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
Steve Litt hat gesagt: // Steve Litt wrote: The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Yup, that's right. The small script in my previous mail counts characters, lines and words and it puts a little headline above the outcome, because I alwas forget, which count is which ;) -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
On Saturday 22 September 2001 06:15, Frank Barknecht wrote: Steve Litt hat gesagt: // Steve Litt wrote: The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Yup, that's right. The small script in my previous mail counts characters, lines and words and it puts a little headline above the outcome, because I alwas forget, which count is which ;) Yes, but on further thought I think you might need to subtract the number of lines from the number of characters, because presumably the character count shouldn't include newlines. So in Unix/Linux/BSD subtract the number of lines, and in DOS/Windows subtract double the number of lines (crlf). Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
Steve Litt hat gesagt: // Steve Litt wrote: > The wc command counts spaces, so if you simply remove the -c from the wc > command at the bottom of this thread, you'll see three numbers output on one > line. The first number is the number of lines, and is probably totally > meaningless. The second number is the number of words. The third number is > the number of characters, including spaces. Yup, that's right. The small script in my previous mail counts characters, lines and words and it puts a little headline above the outcome, because I alwas forget, which count is which ;) -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
On Saturday 22 September 2001 06:15, Frank Barknecht wrote: > Steve Litt hat gesagt: // Steve Litt wrote: > > The wc command counts spaces, so if you simply remove the -c from the wc > > command at the bottom of this thread, you'll see three numbers output on > > one line. The first number is the number of lines, and is probably > > totally meaningless. The second number is the number of words. The third > > number is the number of characters, including spaces. > > Yup, that's right. The small script in my previous mail counts > characters, lines and words and it puts a little headline above > the outcome, because I alwas forget, which count is which ;) Yes, but on further thought I think you might need to subtract the number of lines from the number of characters, because presumably the character count shouldn't include newlines. So in Unix/Linux/BSD subtract the number of lines, and in DOS/Windows subtract double the number of lines (crlf). Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. You will find the word count in the terminal you started lyx from (or in your ~/.xsession-errors file) Of course, one could wrap this in a little skript called wordcount - #!/bin/sh echo 'Chars | Lines | Words' wc - bye, -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Characters including spaces? Does any WP count spaces as characters? There certainly would be no tool for this, since LyX is very far from treating spaces as characters. If you aren't worried about the spaces between figures and such, then why be worried about the spaces between words and characters, since these are handled similarly to those of spaces between words, letters, and sentences? On Friday 21 September 2001 06:02 pm, you wrote: Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Great news for Praedor! The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk. On Friday 21 September 2001 19:51, Christopher M. Jones wrote: Characters including spaces? Does any WP count spaces as characters? There certainly would be no tool for this, since LyX is very far from treating spaces as characters. If you aren't worried about the spaces between figures and such, then why be worried about the spaces between words and characters, since these are handled similarly to those of spaces between words, letters, and sentences? On Friday 21 September 2001 06:02 pm, you wrote: Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. You will find the word count in the terminal you started lyx from (or in your ~/.xsession-errors file) Of course, one could wrap this in a little skript called wordcount - #!/bin/sh echo 'Chars | Lines | Words' wc - bye, -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Characters including spaces? Does any WP count spaces as characters? There certainly would be no tool for this, since LyX is very far from treating spaces as characters. If you aren't worried about the spaces between figures and such, then why be worried about the spaces between words and characters, since these are handled similarly to those of spaces between words, letters, and sentences? On Friday 21 September 2001 06:02 pm, you wrote: Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Great news for Praedor! The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk. On Friday 21 September 2001 19:51, Christopher M. Jones wrote: Characters including spaces? Does any WP count spaces as characters? There certainly would be no tool for this, since LyX is very far from treating spaces as characters. If you aren't worried about the spaces between figures and such, then why be worried about the spaces between words and characters, since these are handled similarly to those of spaces between words, letters, and sentences? On Friday 21 September 2001 06:02 pm, you wrote: Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: Praedor Tempus hat gesagt: // Praedor Tempus wrote: On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. If you hace wc installed, the following is faster: Choose File-Export-Custom, File Type ASCII, Command wc -w. [...]
Re: word count
Praedor Tempus hat gesagt: // Praedor Tempus wrote: > On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: > > I seem to recall seeing some question about this previously but cannot > > truly recall. How does one do a word count on a lyx document? > > Nevermind. Found it - do a spellcheck. If you hace "wc" installed, the following is faster: Choose "File->Export->Custom", File Type ASCII, Command "wc -w". You will find the word count in the terminal you started lyx from (or in your ~/.xsession-errors file) Of course, one could wrap this in a little skript called "wordcount" >-> #!/bin/sh echo 'Chars | Lines | Words' wc >-> bye, -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\
Re: word count
Thanks. Now I have a new problem (for me) for which I am almost sure there will be no tool for. First, for one of the journals that my paper could be submitted to, a word count goes a long way but for another (PNAS) it seems that they have a total character limit (words, spaces - including spaces between words and so forth, but also the space taken up by figures and tables). I'll ask anyway...is there a tool/means of counting not only the words, but also the total number of characters in a document? I'll not worry about the space taken by figures and tables since they can be scaled down (to a point) as needed. A word count gives me 5500, so a rough guestimate of characters is at least twice that amount... On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: > Praedor Tempus hat gesagt: // Praedor Tempus wrote: > > On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: > > > I seem to recall seeing some question about this previously but cannot > > > truly recall. How does one do a word count on a lyx document? > > > > Nevermind. Found it - do a spellcheck. > > If you hace "wc" installed, the following is faster: > > Choose "File->Export->Custom", File Type ASCII, Command "wc -w". [...]
Re: word count
Characters including spaces? Does any WP count spaces as characters? There certainly would be no tool for this, since LyX is very far from treating spaces as characters. If you aren't worried about the spaces between figures and such, then why be worried about the spaces between words and characters, since these are handled similarly to those of spaces between words, letters, and sentences? On Friday 21 September 2001 06:02 pm, you wrote: > Thanks. Now I have a new problem (for me) for which I am almost sure there > will be no tool for. First, for one of the journals that my paper could be > submitted to, a word count goes a long way but for another (PNAS) it seems > that they have a total character limit (words, spaces - including spaces > between words and so forth, but also the space taken up by figures and > tables). > I'll ask anyway...is there a tool/means of counting not only the words, > but also the total number of characters in a document? I'll not worry > about the space taken by figures and tables since they can be scaled down > (to a point) as needed. A word count gives me 5500, so a rough guestimate > of characters is at least twice that amount... > > On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: > > Praedor Tempus hat gesagt: // Praedor Tempus wrote: > > > On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: > > > > I seem to recall seeing some question about this previously but > > > > cannot truly recall. How does one do a word count on a lyx document? > > > > > > Nevermind. Found it - do a spellcheck. > > > > If you hace "wc" installed, the following is faster: > > > > Choose "File->Export->Custom", File Type ASCII, Command "wc -w". > > [...]
Re: word count
Great news for Praedor! The wc command counts spaces, so if you simply remove the -c from the wc command at the bottom of this thread, you'll see three numbers output on one line. The first number is the number of lines, and is probably totally meaningless. The second number is the number of words. The third number is the number of characters, including spaces. Steve -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk. On Friday 21 September 2001 19:51, Christopher M. Jones wrote: > Characters including spaces? Does any WP count spaces as characters? There > certainly would be no tool for this, since LyX is very far from treating > spaces as characters. If you aren't worried about the spaces between > figures and such, then why be worried about the spaces between words and > characters, since these are handled similarly to those of spaces between > words, letters, and sentences? > > On Friday 21 September 2001 06:02 pm, you wrote: > > Thanks. Now I have a new problem (for me) for which I am almost sure > > there will be no tool for. First, for one of the journals that my paper > > could be submitted to, a word count goes a long way but for another > > (PNAS) it seems that they have a total character limit (words, spaces - > > including spaces between words and so forth, but also the space taken up > > by figures and tables). > > I'll ask anyway...is there a tool/means of counting not only the words, > > but also the total number of characters in a document? I'll not worry > > about the space taken by figures and tables since they can be scaled down > > (to a point) as needed. A word count gives me 5500, so a rough > > guestimate of characters is at least twice that amount... > > > > On Friday 21 September 2001 02:58 am, Frank Barknecht wrote: > > > Praedor Tempus hat gesagt: // Praedor Tempus wrote: > > > > On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: > > > > > I seem to recall seeing some question about this previously but > > > > > cannot truly recall. How does one do a word count on a lyx > > > > > document? > > > > > > > > Nevermind. Found it - do a spellcheck. > > > > > > If you hace "wc" installed, the following is faster: > > > > > > Choose "File->Export->Custom", File Type ASCII, Command "wc -w". > > > > [...]
Re: word count
On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. praedor
Re: word count
On Saturday 15 September 2001 09:43, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? I do about 10 wordcounts a day to track my progress on my book (44081 words at present time). I jam the wordcount into a log, once again to track progress. My script first adds to the log, then prints the log so I can see my progress for the day. Here's the shellscript: LOGFILE=/data/books/newbook/xwc.log TEMP1=`grep -v ^[\] /data/books/newbook/xtp.lyx | grep -v ^#L yX 1.1 | grep -v ^$ | wc` TEMP2=`date +%Y/%m/%d @ %H:%M:%S` echo $TEMP2 : $TEMP1 $LOGFILE cat $LOGFILE -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. praedor
Re: word count
On Saturday 15 September 2001 09:43, Praedor Tempus wrote: I seem to recall seeing some question about this previously but cannot truly recall. How does one do a word count on a lyx document? I do about 10 wordcounts a day to track my progress on my book (44081 words at present time). I jam the wordcount into a log, once again to track progress. My script first adds to the log, then prints the log so I can see my progress for the day. Here's the shellscript: LOGFILE=/data/books/newbook/xwc.log TEMP1=`grep -v ^[\] /data/books/newbook/xtp.lyx | grep -v ^#L yX 1.1 | grep -v ^$ | wc` TEMP2=`date +%Y/%m/%d @ %H:%M:%S` echo $TEMP2 : $TEMP1 $LOGFILE cat $LOGFILE -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
On Saturday 15 September 2001 07:43 am, Praedor Tempus wrote: > I seem to recall seeing some question about this previously but cannot > truly recall. How does one do a word count on a lyx document? Nevermind. Found it - do a spellcheck. praedor
Re: word count
On Saturday 15 September 2001 09:43, Praedor Tempus wrote: > I seem to recall seeing some question about this previously but cannot > truly recall. How does one do a word count on a lyx document? I do about 10 wordcounts a day to track my progress on my book (44081 words at present time). I jam the wordcount into a log, once again to track progress. My script first adds to the log, then prints the log so I can see my progress for the day. Here's the shellscript: LOGFILE="/data/books/newbook/xwc.log" TEMP1=`grep -v "^[\]" /data/books/newbook/xtp.lyx | grep -v "^#L yX 1.1" | grep -v "^$" | wc` TEMP2=`date +"%Y/%m/%d @ %H:%M:%S"` echo "$TEMP2 : $TEMP1" >> $LOGFILE cat $LOGFILE -- Steve Litt Webmaster, Troubleshooters.Com http://www.troubleshooters.com [EMAIL PROTECTED] (Legal Disclaimer) Follow these suggestions at your own risk.
Re: word count
Shawn Koons wrote: Hello: Forgive this possible faq, but is there a way to do a word count in lyx (I have checked the documentation and found nothing) - or - should I convert to ascii and check it that way? Shawn -- Mitakuye Oyasin Well, here's a perl script that should do something close (this defines a "word" as a group of letters and/or apostrophes or dashes). Uncomment the "print" line to see if it leaves the words you want. #!/usr/bin/perl -w # Count words in a lyx file my $total = 0; while () { chomp; next if ($. == 1) || m'^\\' || m'^$'; tr/-a-zA-Z' / /cds; tr/'//; # print "$_\n"; # uncomment to see it operating $total += split; } print "$total\n"; -- Ned Konz currently: Stanwood, WA email: [EMAIL PROTECTED] homepage: http://www.bike-nomad.com
Re: word count
Shawn Koons wrote: Hello: Forgive this possible faq, but is there a way to do a word count in lyx (I have checked the documentation and found nothing) - or - should I convert to ascii and check it that way? Shawn -- Mitakuye Oyasin If you run the spell checker it will tell you how many words were checked. Alternatively export the file to a latex file. There is supposed to be a program to strip out all the latex commands. Then you can use wc. I don't know what the program to strip out latex commands is called but perhaps you can use that. If I find out the name I'll let you know. Hope this helps Ralph boland
Re: word count
Shawn Koons wrote: Hello: Forgive this possible faq, but is there a way to do a word count in lyx (I have checked the documentation and found nothing) - or - should I convert to ascii and check it that way? Shawn -- Mitakuye Oyasin Well, here's a perl script that should do something close (this defines a "word" as a group of letters and/or apostrophes or dashes). Uncomment the "print" line to see if it leaves the words you want. #!/usr/bin/perl -w # Count words in a lyx file my $total = 0; while () { chomp; next if ($. == 1) || m'^\\' || m'^$'; tr/-a-zA-Z' / /cds; tr/'//; # print "$_\n"; # uncomment to see it operating $total += split; } print "$total\n"; -- Ned Konz currently: Stanwood, WA email: [EMAIL PROTECTED] homepage: http://www.bike-nomad.com