Re: [M100] Needing a tech

In this vein, is it possible to get a cap kit for the M100, or at least a shopping list?  This is the right age for the electrolytics to go bad on these things, and while the three M100s in my stable are working fine at the moment, I'd like to get ahead of any problems, or at least be prepared

Re: [M100] Bar code reader with REX / M100 Digest, Vol 87, Issue 2

they are 29$ new on newegg On Fri, Mar 2, 2018 at 4:49 AM, Anthony Coghlan wrote: > Thanks, Peter. I think I’m going to try the barcode reader you use if I > can get it on eBay cheaply, as it may be more reliable anyway. Perhaps I > have to try loading the driver and

Re: [M100] Bar code reader with REX

sorry losey on screen keyboard here.. BCR+REX work fine on my m100. Sugest you reload the .CO files... known good versions are on club100 REX doesn't leave anything in ram the bcr drivers dont mess with rom. when a rexed m100 crashes it is normal to boot up with the lasr rom selected, do the poke

Re: [M100] Bar code reader with REX

Willard, thanks for the confirmation that it’s not something inherent to trying to use REX and BCR at the same time. That would be sad, because I like my REX... I think I got the driver off Club 100 and transferred It with MComm. I have the original cassette, too, but haven’t tried it. Poke

[M100] ftp.whtech.com

Don's upgrading so you need to use http://ftp.whtech.com/ for the time being ftp isn't logging in right.. Greg

Re: [M100] Bar code reader with REX

It might be best to simply do a cold reboot make sure there is nothing hanging around in memory to cause problems.Then start the REX and BCR drivers. There are some applications that will not work with REX because of how it operates. From: M100

Re: [M100] Bar code reader with REX

On Fri, 2 Mar 2018 15:46:55 -0500 Anthony Coghlan wrote: (OK on a real keyboard now! :) > Willard, thanks for the confirmation that it’s not something inherent > to trying to use REX and BCR at the same time. That would be sad, > because I like my REX... I agree, REX is

Re: [M100] Bar code reader with REX / M100 Digest, Vol 87, Issue 2

I don't have a REX in my M102, but I have been using the BCR to do "pantry" and "wine cellar" inventory. Both are in the basement, so are not readily accessible when one wants to know what is down there. I am not using the Radio Shack wand, but instead am using a UniTech MS120-NTCB00-SG

Re: [M100] Bar code reader with REX / M100 Digest, Vol 87, Issue 2

Thanks, Peter. I think I’m going to try the barcode reader you use if I can get it on eBay cheaply, as it may be more reliable anyway. Perhaps I have to try loading the driver and program with REX temporarily disabled as an experiment. I suspect a conflict in memory and don’t otherwise know how