Re: [M100] 4 REXes available
hope to be able to be able to jump on a future round On Fri, Feb 23, 2018 at 5:32 PM, Joe Grubbs wrote: > Thanks Jim, this is very helpful > > > -- > *From:* M100 on behalf of Jim > Anderson > *Sent:* Friday, February 23, 2018 2:38 PM > *To:* m...@bitchin100.com > *Subject:* Re: [M100] 4 REXes available > > > -Original Message- > > > > I know this batch were pre-programmed for the 100 (and 102), but I > > assume it's easy enough to make it 200 compatible? > > It's pretty straightforward in that it doesn't require any specialized > chip-programming hardware. As long as you have a TPDD or TPDD emulator > already working with your machine, it's just a matter of putting a couple > of files in the TPDD (or emulator) and running a few commands on the T200. > > http://bitchin100.com/wiki/index.php?title=REX_Release_4.9 > > After putting the REX in your T200 ROM socket, scroll down to the section > 'Rebuilding REX' and follow steps 2, 4, and 5 (steps 1 and 3 are only > needed if you already had the REX working in your machine, although > obviously the part of step 1 about backing up your RAM files is important, > since in step 5 you'll be doing a cold restart). Use the files for release > 162, though, not 236. They're linked a little bit further down the page. > > This is a good process to be familiar with anyways, as this is essentially > how you'd go about upgrading your REX to a future software release. > > > > > > > > jim >
Re: [M100] 4 REXes available
Thanks Jim, this is very helpful From: M100 on behalf of Jim Anderson Sent: Friday, February 23, 2018 2:38 PM To: m...@bitchin100.com Subject: Re: [M100] 4 REXes available > -Original Message- > > I know this batch were pre-programmed for the 100 (and 102), but I > assume it's easy enough to make it 200 compatible? It's pretty straightforward in that it doesn't require any specialized chip-programming hardware. As long as you have a TPDD or TPDD emulator already working with your machine, it's just a matter of putting a couple of files in the TPDD (or emulator) and running a few commands on the T200. http://bitchin100.com/wiki/index.php?title=REX_Release_4.9 After putting the REX in your T200 ROM socket, scroll down to the section 'Rebuilding REX' and follow steps 2, 4, and 5 (steps 1 and 3 are only needed if you already had the REX working in your machine, although obviously the part of step 1 about backing up your RAM files is important, since in step 5 you'll be doing a cold restart). Use the files for release 162, though, not 236. They're linked a little bit further down the page. This is a good process to be familiar with anyways, as this is essentially how you'd go about upgrading your REX to a future software release. jim
Re: [M100] 4 REXes available
> -Original Message- > > I know this batch were pre-programmed for the 100 (and 102), but I > assume it's easy enough to make it 200 compatible? It's pretty straightforward in that it doesn't require any specialized chip-programming hardware. As long as you have a TPDD or TPDD emulator already working with your machine, it's just a matter of putting a couple of files in the TPDD (or emulator) and running a few commands on the T200. http://bitchin100.com/wiki/index.php?title=REX_Release_4.9 After putting the REX in your T200 ROM socket, scroll down to the section 'Rebuilding REX' and follow steps 2, 4, and 5 (steps 1 and 3 are only needed if you already had the REX working in your machine, although obviously the part of step 1 about backing up your RAM files is important, since in step 5 you'll be doing a cold restart). Use the files for release 162, though, not 236. They're linked a little bit further down the page. This is a good process to be familiar with anyways, as this is essentially how you'd go about upgrading your REX to a future software release. jim
Re: [M100] 4 REXes available
Thank you for doing this Josh... I wasn't able to jump on one of these this time, but a REX has been on my wish list for a looong time. I'll likely want one for my 100 and 200 next go-round. I know this batch were pre-programmed for the 100 (and 102), but I assume it's easy enough to make it 200 compatible? From: M100 on behalf of Josh Malone Sent: Friday, February 23, 2018 10:15 AM To: m...@bitchin100.com Subject: Re: [M100] 4 REXes available All REXes have been claimed. Thanks so much to everyone. On Feb 20, 2018 6:09 PM, "Josh Malone" mailto:josh.mal...@gmail.com>> wrote: Hello all, Well, I was hoping to have more stock before I sent this, but circumstances will prevent me from building more for a while and I need to pay the the Digikey bill :) I have 4 REX units available for sale. Programmed for Tandy 100/102. Price is $65 plus $7 priority shipping. Please mail me off-list to inquire. Payment via PayPal only for now. U.S. shipping only, again, for now. I *will* be building more, but it will be a few weeks or more. :( Thanks for everyone's support. I appreciate it! -Josh
Re: [M100] 4 REXes available
All REXes have been claimed. Thanks so much to everyone. On Feb 20, 2018 6:09 PM, "Josh Malone" wrote: > Hello all, > > Well, I was hoping to have more stock before I sent this, but > circumstances will prevent me from building more for a while and I need to > pay the the Digikey bill :) > > I have 4 REX units available for sale. Programmed for Tandy 100/102. Price > is $65 plus $7 priority shipping. Please mail me off-list to inquire. > Payment via PayPal only for now. U.S. shipping only, again, for now. > > I *will* be building more, but it will be a few weeks or more. :( > > Thanks for everyone's support. I appreciate it! > > -Josh >