ext Robin Burchell virot...@viroteck.net writes:
No, at least, I very much doubt it. libgq seems to be unmaintained -
or at least, nobody seems interested in taking my patches to it,
despite repeated attempts to get somebody to have a look (see
On 2010-09-25 at 05:38:31, ext Yan Leo wrote:
I modified the adaptors as you suggested, and removed the
setStandbyOverride function.
All of the sensor drivers on Medfield can output data correctly when
the screen is blanked.
Hi,
The alsadaptor-ascii is very very similar to the existing
Thanks, Markus. If it needs, I will add configurable path in the adaptor.
Thanks,
Leo
-Original Message-
From: markus.lehto...@nokia.com [mailto:markus.lehto...@nokia.com]
Sent: Monday, September 27, 2010 2:51 PM
To: Yan, Leo; timo.ron...@digia.com
Cc: meego-dev@meego.com
Subject: RE:
After clicking Ok, you should be able to navigate the call stack and see
what's really wrong. Perhaps your toolbar pointer was null or something?
Also, I'm not sure this is an appropriate mailing list. Problem is I don't
know what's the right one either since there is no meego application
Hi Vainio
Sorry for send this to incorrect mail list, according comments you provided,
this issue has been fixed, thanks a lot
Best regards
Steven
From: Ville M. Vainio [mailto:vivai...@gmail.com]
Sent: Monday, September 27, 2010 12:19 AM
To: Steven Yang
Cc: meego-dev@meego.com
2010/9/24 Kevron Rees kevron_m_r...@linux.intel.com
Hi~
I have some questions about contexkit need your help. Thank you a lot.
1. In 2010/5/24 contextkit package have some patch, but in 2010/8/10
contextkit package those patch disappeared and can't get
the commam property value
Hi,
lovebird alexandrite wrote:
I would to follow this
wiki http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch, and
try to run Meego on beagle board.
Now, I have a beagle board, but no LCD, is the LCD out of the box? Or I
should to buy a LCD module and connect to beagle board
2010/9/24 Marius Vollmer marius.voll...@nokia.com
ext Jia-Chi Lai jackie09050...@gmail.com writes:
I have some questions about contexkit need your help. Thank you a lot.
1. In 2010/5/24 contextkit package have some patch, but in 2010/8/10
contextkit package those patch disappeared and
On Mon, Sep 27, 2010 at 9:30 AM, Dave Neary dne...@maemo.org wrote:
Hi,
lovebird alexandrite wrote:
I would to follow this
wiki http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch, and
try to run Meego on beagle board.
Now, I have a beagle board, but no LCD, is the LCD out of the
ext Jia-Chi Lai jackie09050...@gmail.com writes:
I found contextkit-maemo and those plugins in it at Meego repo but those
plugins seem didn't work in meego netbook.
In other words, meego will remove those plugins from
contextkit-maemo??
I would expect MeeGo to not have the contextkit-maemo
Thank you, Dave!
I`ve read this page. The device is too dear and impracticable for me, is
there any cheaper one?
2010/9/27 Dave Neary dne...@maemo.org
Hi,
lovebird alexandrite wrote:
I would to follow this
wiki http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch, and
try to run
On Mon, Sep 27, 2010 at 8:15 AM, Marius Vollmer
marius.voll...@nokia.com wrote:
The Right Thing would have been (IMO) to get behind dconf, and write the
Qt-equivalent of GSettings for Harmattan. This didn't happen and libgq
just doesn't die. There is a copy of it somewhere in Qt Mobility as
On Mon, Sep 27, 2010 at 8:15 AM, Marius Vollmer
marius.voll...@nokia.com wrote:
copies in libmeegotouch and Qt Mobility and takes patches, etc. He/she
might also want to follow the 'vision' of libgq and provide more
wrappers, such as for GIO.
Marius, apart for the gconf -2lib that it
Hi,
Disclaimer: these are speculation personal opinions from somebody
not involved with the MTF development!
ext Sean Kelley wrote:
There needs to be a separation between Nokia Device development and the
libmeegotouch framework development. At this stage it is tightly
coupled with Nokia's
Hi,
Eero Tamminen wrote:
Nokia is currently the one with most MTF applications testing which
provides the fast feedback loop on issues that applications developers
are encountering when using it.
I.e. I think in this MTF maturization period there's some benefit
of this tighter coupling.
Hi all,
as part of maintenance ongoing on MeeGo 1.0.x, we discovered each new
kernel release are installed on MeeGo in parallel to previously
installed kernel (in libzypp configuration, /etc/zypp/zypp.conf).
While it is a good idea for a development PoV, on a supported end-user
device, it might
On 9/27/2010 5:57 AM, Frederic Crozat wrote:
Hi all,
as part of maintenance ongoing on MeeGo 1.0.x, we discovered each new
kernel release are installed on MeeGo in parallel to previously
installed kernel (in libzypp configuration, /etc/zypp/zypp.conf).
While it is a good idea for a
Le lundi 27 septembre 2010 à 05:59 -0700, Arjan van de Ven a écrit :
On 9/27/2010 5:57 AM, Frederic Crozat wrote:
Hi all,
as part of maintenance ongoing on MeeGo 1.0.x, we discovered each new
kernel release are installed on MeeGo in parallel to previously
installed kernel (in libzypp
meego-dev-boun...@meego.com wrote:
yum has the feature that it will leave the last 3 kernels installed...
(as well as the currently running one).
this is very important so that you have a fail safe; you can always boot
back into a known good kernel, this helps support a lot.
I assumed
On Mon, 2010-09-27 at 14:58 +0200, Tamminen Eero (Nokia-MS/Helsinki)
wrote:
Do you have an escalation route for driving this issue?
Who's responsible for MeeGo bugs QA in general?
http://meego.com/about/governance/quality-assurance
--
Quim
___
2010/9/24 Kevron Rees kevron_m_r...@linux.intel.com
Hi~
I have some questions about contexkit need your help. Thank you a lot.
1. In 2010/5/24 contextkit package have some patch, but in 2010/8/10
contextkit package those patch disappeared and can't get
the commam property value
- Original message -
From: Foster, Dawn M dawn.m.fos...@intel.com
To: Attila Csipa me...@csipa.in.rs
cc: meego-...@meego.com meego-dev@meego.com
Subject: Re: [MeeGo-dev] Refocusing mailing lists, was: Re: A note
SIGSEGV pop up when using QToolBar
Date: Mon, 27 Sep 2010 10:08:17
On Mon, 27 Sep 2010, 18:08:17 BST, Foster, Dawn M dawn.m.fos...@intel.com
wrote:
We're also in the process of moving a bunch of infrastructure
to OSU, so if we do decide to rename some lists, I would rather wait to
do it until after we finish moving everything.
Is there really an
On Sep 27, 2010, at 10:42 AM, Andrew Flegg wrote:
On Mon, 27 Sep 2010, 18:08:17 BST, Foster, Dawn M dawn.m.fos...@intel.com
wrote:
We're also in the process of moving a bunch of infrastructure
to OSU, so if we do decide to rename some lists, I would rather wait to
do it until after we
On Mon, Sep 27, 2010 at 9:00 PM, Foster, Dawn M dawn.m.fos...@intel.com wrote:
I'll let someone more intimately involved in the migration comment on
the timeline for getting everything moved.
While we wait, how about hammering down the new list names so they are
ready when people are?
--
Em Segunda-feira 27 Setembro 2010, às 14:16:19, Eero Tamminen escreveu:
In a nutshell, MTF needs to be a part of Qt with all the implications of
more separate governance.
http://labs.qt.nokia.com/2010/06/03/qt-and-open-governance/
I would also assume something like that to happen later
Hi,
Ryan Ware wrote:
On 09/18/2010 08:50 AM, Felipe Contreras wrote:
And I don't like either. I suggest mailing lists for code review, just
like many successful and dynamic projects do (linux, qemu, ffmpeg,
vlc):
On 9/25/2010 10:44 AM, Dave Neary wrote:
Hi,
Ryan Ware wrote:
On 09/18/2010 08:50 AM, Felipe Contreras wrote:
And I don't like either. I suggest mailing lists for code review, just
like many successful and dynamic projects do (linux, qemu, ffmpeg,
vlc):
Hi,
I found that meego-video-player uses qt-moblility lib QtMedia to
play the video instead of phonon. What's the advantage of QtMedia in
finishing this job?
Thanks!
-Matt
___
MeeGo-dev mailing list
MeeGo-dev@meego.com
Hi,
With gw's suggestions, I successfully mounted the rootfs via NFS, and booted
the kernel.
But unfortunately, the LCD is still black.
I checked the Xorg.0.log, there are two errors,
1. dlopen of /usr/lib/dri/swrast_dri.so failed, No such file or directory .
2. Error opening
30 matches
Mail list logo
